1 #ifndef __LINUX_NL80211_H 2 #define __LINUX_NL80211_H 3 /* 4 * 802.11 netlink interface public header 5 * 6 * Copyright 2006, 2007, 2008 Johannes Berg <johannes (at) sipsolutions.net> 7 * Copyright 2008 Michael Wu <flamingice (at) sourmilk.net> 8 * Copyright 2008 Luis Carlos Cobo <luisca (at) cozybit.com> 9 * Copyright 2008 Michael Buesch <mb (at) bu3sch.de> 10 * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez (at) atheros.com> 11 * Copyright 2008 Jouni Malinen <jouni.malinen (at) atheros.com> 12 * Copyright 2008 Colin McCabe <colin (at) cozybit.com> 13 * 14 * Permission to use, copy, modify, and/or distribute this software for any 15 * purpose with or without fee is hereby granted, provided that the above 16 * copyright notice and this permission notice appear in all copies. 17 * 18 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 19 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 20 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 21 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 22 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 23 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 24 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 25 * 26 */ 27 28 #include <linux/types.h> 29 30 /** 31 * DOC: Station handling 32 * 33 * Stations are added per interface, but a special case exists with VLAN 34 * interfaces. When a station is bound to an AP interface, it may be moved 35 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). 36 * The station is still assumed to belong to the AP interface it was added 37 * to. 38 * 39 * TODO: need more info? 40 */ 41 42 /** 43 * enum nl80211_commands - supported nl80211 commands 44 * 45 * @NL80211_CMD_UNSPEC: unspecified command to catch errors 46 * 47 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request 48 * to get a list of all present wiphys. 49 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or 50 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, 51 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, 52 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, 53 * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 54 * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. 55 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request 56 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and 57 * %NL80211_ATTR_WIPHY_NAME. 58 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes 59 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. 60 * 61 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; 62 * either a dump request on a %NL80211_ATTR_WIPHY or a specific get 63 * on an %NL80211_ATTR_IFINDEX is supported. 64 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires 65 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. 66 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response 67 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, 68 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also 69 * be sent from userspace to request creation of a new virtual interface, 70 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and 71 * %NL80211_ATTR_IFNAME. 72 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes 73 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from 74 * userspace to request deletion of a virtual interface, then requires 75 * attribute %NL80211_ATTR_IFINDEX. 76 * 77 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified 78 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. 79 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, 80 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. 81 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, 82 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, 83 * and %NL80211_ATTR_KEY_SEQ attributes. 84 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX 85 * or %NL80211_ATTR_MAC. 86 * 87 * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a 88 * %NL80222_CMD_NEW_BEACON message) 89 * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface 90 * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, 91 * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. 92 * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, 93 * parameters are like for %NL80211_CMD_SET_BEACON. 94 * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it 95 * 96 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by 97 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 98 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by 99 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 100 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the 101 * the interface identified by %NL80211_ATTR_IFINDEX. 102 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC 103 * or, if no MAC address given, all stations, on the interface identified 104 * by %NL80211_ATTR_IFINDEX. 105 * 106 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to 107 * destination %NL80211_ATTR_MAC on the interface identified by 108 * %NL80211_ATTR_IFINDEX. 109 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to 110 * destination %NL80211_ATTR_MAC on the interface identified by 111 * %NL80211_ATTR_IFINDEX. 112 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the 113 * the interface identified by %NL80211_ATTR_IFINDEX. 114 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC 115 * or, if no MAC address given, all mesh paths, on the interface identified 116 * by %NL80211_ATTR_IFINDEX. 117 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by 118 * %NL80211_ATTR_IFINDEX. 119 * 120 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set 121 * regulatory domain. 122 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command 123 * after being queried by the kernel. CRDA replies by sending a regulatory 124 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our 125 * current alpha2 if it found a match. It also provides 126 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each 127 * regulatory rule is a nested set of attributes given by 128 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and 129 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by 130 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and 131 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. 132 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain 133 * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will 134 * store this as a valid request and then query userspace for it. 135 * 136 * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the 137 * interface identified by %NL80211_ATTR_IFINDEX 138 * 139 * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the 140 * interface identified by %NL80211_ATTR_IFINDEX 141 * 142 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The 143 * interface is identified with %NL80211_ATTR_IFINDEX and the management 144 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be 145 * added to the end of the specified management frame is specified with 146 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be 147 * added to all specified management frames generated by 148 * kernel/firmware/driver. 149 * Note: This command has been removed and it is only reserved at this 150 * point to avoid re-using existing command number. The functionality this 151 * command was planned for has been provided with cleaner design with the 152 * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, 153 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, 154 * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. 155 * 156 * @NL80211_CMD_GET_SCAN: get scan results 157 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters 158 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to 159 * NL80211_CMD_GET_SCAN and on the "scan" multicast group) 160 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, 161 * partial scan results may be available 162 * 163 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain 164 * has been changed and provides details of the request information 165 * that caused the change such as who initiated the regulatory request 166 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx 167 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if 168 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or 169 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain 170 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is 171 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on 172 * to (%NL80211_ATTR_REG_ALPHA2). 173 * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon 174 * has been found while world roaming thus enabling active scan or 175 * any mode of operation that initiates TX (beacons) on a channel 176 * where we would not have been able to do either before. As an example 177 * if you are world roaming (regulatory domain set to world or if your 178 * driver is using a custom world roaming regulatory domain) and while 179 * doing a passive scan on the 5 GHz band you find an AP there (if not 180 * on a DFS channel) you will now be able to actively scan for that AP 181 * or use AP mode on your card on that same channel. Note that this will 182 * never be used for channels 1-11 on the 2 GHz band as they are always 183 * enabled world wide. This beacon hint is only sent if your device had 184 * either disabled active scanning or beaconing on a channel. We send to 185 * userspace the wiphy on which we removed a restriction from 186 * (%NL80211_ATTR_WIPHY) and the channel on which this occurred 187 * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) 188 * the beacon hint was processed. 189 * 190 * @NL80211_CMD_AUTHENTICATE: authentication request and notification. 191 * This command is used both as a command (request to authenticate) and 192 * as an event on the "mlme" multicast group indicating completion of the 193 * authentication process. 194 * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the 195 * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and 196 * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify 197 * the SSID (mainly for association, but is included in authentication 198 * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used 199 * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE 200 * is used to specify the authentication type. %NL80211_ATTR_IE is used to 201 * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) 202 * to be added to the frame. 203 * When used as an event, this reports reception of an Authentication 204 * frame in station and IBSS modes when the local MLME processed the 205 * frame, i.e., it was for the local STA and was received in correct 206 * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the 207 * MLME SAP interface (kernel providing MLME, userspace SME). The 208 * included %NL80211_ATTR_FRAME attribute contains the management frame 209 * (including both the header and frame body, but not FCS). This event is 210 * also used to indicate if the authentication attempt timed out. In that 211 * case the %NL80211_ATTR_FRAME attribute is replaced with a 212 * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which 213 * pending authentication timed out). 214 * @NL80211_CMD_ASSOCIATE: association request and notification; like 215 * NL80211_CMD_AUTHENTICATE but for Association and Reassociation 216 * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, 217 * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). 218 * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like 219 * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to 220 * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication 221 * primitives). 222 * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like 223 * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to 224 * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). 225 * 226 * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael 227 * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the 228 * event includes %NL80211_ATTR_MAC to describe the source MAC address of 229 * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key 230 * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and 231 * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this 232 * event matches with MLME-MICHAELMICFAILURE.indication() primitive 233 * 234 * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a 235 * FREQ attribute (for the initial frequency if no peer can be found) 236 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those 237 * should be fixed rather than automatically determined. Can only be 238 * executed on a network interface that is UP, and fixed BSSID/FREQ 239 * may be rejected. Another optional parameter is the beacon interval, 240 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not 241 * given defaults to 100 TU (102.4ms). 242 * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is 243 * determined by the network interface. 244 * 245 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute 246 * to identify the device, and the TESTDATA blob attribute to pass through 247 * to the driver. 248 * 249 * @NL80211_CMD_CONNECT: connection request and notification; this command 250 * requests to connect to a specified network but without separating 251 * auth and assoc steps. For this, you need to specify the SSID in a 252 * %NL80211_ATTR_SSID attribute, and can optionally specify the association 253 * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, 254 * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT. 255 * It is also sent as an event, with the BSSID and response IEs when the 256 * connection is established or failed to be established. This can be 257 * determined by the STATUS_CODE attribute. 258 * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), 259 * sent as an event when the card/driver roamed by itself. 260 * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify 261 * userspace that a connection was dropped by the AP or due to other 262 * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and 263 * %NL80211_ATTR_REASON_CODE attributes are used. 264 * 265 * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices 266 * associated with this wiphy must be down and will follow. 267 * 268 * @NL80211_CMD_MAX: highest used command number 269 * @__NL80211_CMD_AFTER_LAST: internal use 270 */ 271 enum nl80211_commands { 272 /* don't change the order or add anything inbetween, this is ABI! */ 273 NL80211_CMD_UNSPEC, 274 275 NL80211_CMD_GET_WIPHY, /* can dump */ 276 NL80211_CMD_SET_WIPHY, 277 NL80211_CMD_NEW_WIPHY, 278 NL80211_CMD_DEL_WIPHY, 279 280 NL80211_CMD_GET_INTERFACE, /* can dump */ 281 NL80211_CMD_SET_INTERFACE, 282 NL80211_CMD_NEW_INTERFACE, 283 NL80211_CMD_DEL_INTERFACE, 284 285 NL80211_CMD_GET_KEY, 286 NL80211_CMD_SET_KEY, 287 NL80211_CMD_NEW_KEY, 288 NL80211_CMD_DEL_KEY, 289 290 NL80211_CMD_GET_BEACON, 291 NL80211_CMD_SET_BEACON, 292 NL80211_CMD_NEW_BEACON, 293 NL80211_CMD_DEL_BEACON, 294 295 NL80211_CMD_GET_STATION, 296 NL80211_CMD_SET_STATION, 297 NL80211_CMD_NEW_STATION, 298 NL80211_CMD_DEL_STATION, 299 300 NL80211_CMD_GET_MPATH, 301 NL80211_CMD_SET_MPATH, 302 NL80211_CMD_NEW_MPATH, 303 NL80211_CMD_DEL_MPATH, 304 305 NL80211_CMD_SET_BSS, 306 307 NL80211_CMD_SET_REG, 308 NL80211_CMD_REQ_SET_REG, 309 310 NL80211_CMD_GET_MESH_PARAMS, 311 NL80211_CMD_SET_MESH_PARAMS, 312 313 NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, 314 315 NL80211_CMD_GET_REG, 316 317 NL80211_CMD_GET_SCAN, 318 NL80211_CMD_TRIGGER_SCAN, 319 NL80211_CMD_NEW_SCAN_RESULTS, 320 NL80211_CMD_SCAN_ABORTED, 321 322 NL80211_CMD_REG_CHANGE, 323 324 NL80211_CMD_AUTHENTICATE, 325 NL80211_CMD_ASSOCIATE, 326 NL80211_CMD_DEAUTHENTICATE, 327 NL80211_CMD_DISASSOCIATE, 328 329 NL80211_CMD_MICHAEL_MIC_FAILURE, 330 331 NL80211_CMD_REG_BEACON_HINT, 332 333 NL80211_CMD_JOIN_IBSS, 334 NL80211_CMD_LEAVE_IBSS, 335 336 NL80211_CMD_TESTMODE, 337 338 NL80211_CMD_CONNECT, 339 NL80211_CMD_ROAM, 340 NL80211_CMD_DISCONNECT, 341 342 NL80211_CMD_SET_WIPHY_NETNS, 343 344 /* add new commands above here */ 345 346 /* used to define NL80211_CMD_MAX below */ 347 __NL80211_CMD_AFTER_LAST, 348 NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 349 }; 350 351 /* 352 * Allow user space programs to use #ifdef on new commands by defining them 353 * here 354 */ 355 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS 356 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE 357 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE 358 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE 359 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE 360 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE 361 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE 362 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT 363 364 /** 365 * enum nl80211_attrs - nl80211 netlink attributes 366 * 367 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors 368 * 369 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. 370 * /sys/class/ieee80211/<phyname>/index 371 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) 372 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters 373 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz 374 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ 375 * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): 376 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including 377 * this attribute) 378 * NL80211_CHAN_HT20 = HT20 only 379 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel 380 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel 381 * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is 382 * less than or equal to the RTS threshold; allowed range: 1..255; 383 * dot11ShortRetryLimit; u8 384 * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is 385 * greater than the RTS threshold; allowed range: 1..255; 386 * dot11ShortLongLimit; u8 387 * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum 388 * length in octets for frames; allowed range: 256..8000, disable 389 * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 390 * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length 391 * larger than or equal to this use RTS/CTS handshake); allowed range: 392 * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 393 * 394 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on 395 * @NL80211_ATTR_IFNAME: network interface name 396 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype 397 * 398 * @NL80211_ATTR_MAC: MAC address (various uses) 399 * 400 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of 401 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 402 * keys 403 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) 404 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 405 * section 7.3.2.25.1, e.g. 0x000FAC04) 406 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 407 * CCMP keys, each six bytes in little endian 408 * 409 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU 410 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing 411 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE 412 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE 413 * 414 * @NL80211_ATTR_STA_AID: Association ID for the station (u16) 415 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of 416 * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) 417 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by 418 * IEEE 802.11 7.3.1.6 (u16). 419 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported 420 * rates as defined by IEEE 802.11 7.3.2.2 but without the length 421 * restriction (at most %NL80211_MAX_SUPP_RATES). 422 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station 423 * to, or the AP interface the station was originally added to to. 424 * @NL80211_ATTR_STA_INFO: information about a station, part of station info 425 * given for %NL80211_CMD_GET_STATION, nested attribute containing 426 * info as possible, see &enum nl80211_sta_info. 427 * 428 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, 429 * consisting of a nested array. 430 * 431 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). 432 * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link. 433 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. 434 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path 435 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at 436 * &enum nl80211_mpath_info. 437 * 438 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of 439 * &enum nl80211_mntr_flags. 440 * 441 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the 442 * current regulatory domain should be set to or is already set to. 443 * For example, 'CR', for Costa Rica. This attribute is used by the kernel 444 * to query the CRDA to retrieve one regulatory domain. This attribute can 445 * also be used by userspace to query the kernel for the currently set 446 * regulatory domain. We chose an alpha2 as that is also used by the 447 * IEEE-802.11d country information element to identify a country. 448 * Users can also simply ask the wireless core to set regulatory domain 449 * to a specific alpha2. 450 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory 451 * rules. 452 * 453 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) 454 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled 455 * (u8, 0 or 1) 456 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled 457 * (u8, 0 or 1) 458 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic 459 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length 460 * restriction (at most %NL80211_MAX_SUPP_RATES). 461 * 462 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from 463 * association request when used with NL80211_CMD_NEW_STATION) 464 * 465 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all 466 * supported interface types, each a flag attribute with the number 467 * of the interface mode. 468 * 469 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for 470 * %NL80211_CMD_SET_MGMT_EXTRA_IE. 471 * 472 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with 473 * %NL80211_CMD_SET_MGMT_EXTRA_IE). 474 * 475 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with 476 * a single scan request, a wiphy attribute. 477 * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements 478 * that can be added to a scan request 479 * 480 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) 481 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive 482 * scanning and include a zero-length SSID (wildcard) for wildcard scan 483 * @NL80211_ATTR_BSS: scan result BSS 484 * 485 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain 486 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* 487 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently 488 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) 489 * 490 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies 491 * an array of command numbers (i.e. a mapping index to command number) 492 * that the driver for the given wiphy supports. 493 * 494 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header 495 * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and 496 * NL80211_CMD_ASSOCIATE events 497 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) 498 * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, 499 * represented as a u32 500 * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and 501 * %NL80211_CMD_DISASSOCIATE, u16 502 * 503 * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as 504 * a u32 505 * 506 * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change 507 * due to considerations from a beacon hint. This attribute reflects 508 * the state of the channel _before_ the beacon hint processing. This 509 * attributes consists of a nested attribute containing 510 * NL80211_FREQUENCY_ATTR_* 511 * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change 512 * due to considerations from a beacon hint. This attribute reflects 513 * the state of the channel _after_ the beacon hint processing. This 514 * attributes consists of a nested attribute containing 515 * NL80211_FREQUENCY_ATTR_* 516 * 517 * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported 518 * cipher suites 519 * 520 * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look 521 * for other networks on different channels 522 * 523 * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this 524 * is used, e.g., with %NL80211_CMD_AUTHENTICATE event 525 * 526 * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is 527 * used for the association (&enum nl80211_mfp, represented as a u32); 528 * this attribute can be used 529 * with %NL80211_CMD_ASSOCIATE request 530 * 531 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a 532 * &struct nl80211_sta_flag_update. 533 * 534 * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls 535 * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in 536 * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE 537 * request, the driver will assume that the port is unauthorized until 538 * authorized by user space. Otherwise, port is marked authorized by 539 * default in station mode. 540 * 541 * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. 542 * We recommend using nested, driver-specific attributes within this. 543 * 544 * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT 545 * event was due to the AP disconnecting the station, and not due to 546 * a local disconnect request. 547 * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT 548 * event (u16) 549 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating 550 * that protected APs should be used. 551 * 552 * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to 553 * indicate which unicast key ciphers will be used with the connection 554 * (an array of u32). 555 * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate 556 * which group key cipher will be used with the connection (a u32). 557 * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate 558 * which WPA version(s) the AP we want to associate with is using 559 * (a u32 with flags from &enum nl80211_wpa_versions). 560 * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate 561 * which key management algorithm(s) to use (an array of u32). 562 * 563 * @NL80211_ATTR_REQ_IE: (Re)association request information elements as 564 * sent out by the card, for ROAM and successful CONNECT events. 565 * @NL80211_ATTR_RESP_IE: (Re)association response information elements as 566 * sent by peer, for ROAM and successful CONNECT events. 567 * 568 * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE 569 * commands to specify using a reassociate frame 570 * 571 * @NL80211_ATTR_KEY: key information in a nested attribute with 572 * %NL80211_KEY_* sub-attributes 573 * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() 574 * and join_ibss(), key information is in a nested attribute each 575 * with %NL80211_KEY_* sub-attributes 576 * 577 * @NL80211_ATTR_PID: Process ID of a network namespace. 578 * 579 * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for 580 * dumps. This number increases whenever the object list being 581 * dumped changes, and as such userspace can verify that it has 582 * obtained a complete and consistent snapshot by verifying that 583 * all dump messages contain the same generation number. If it 584 * changed then the list changed and the dump should be repeated 585 * completely from scratch. 586 * 587 * @NL80211_ATTR_MAX: highest attribute number currently defined 588 * @__NL80211_ATTR_AFTER_LAST: internal use 589 */ 590 enum nl80211_attrs { 591 /* don't change the order or add anything inbetween, this is ABI! */ 592 NL80211_ATTR_UNSPEC, 593 594 NL80211_ATTR_WIPHY, 595 NL80211_ATTR_WIPHY_NAME, 596 597 NL80211_ATTR_IFINDEX, 598 NL80211_ATTR_IFNAME, 599 NL80211_ATTR_IFTYPE, 600 601 NL80211_ATTR_MAC, 602 603 NL80211_ATTR_KEY_DATA, 604 NL80211_ATTR_KEY_IDX, 605 NL80211_ATTR_KEY_CIPHER, 606 NL80211_ATTR_KEY_SEQ, 607 NL80211_ATTR_KEY_DEFAULT, 608 609 NL80211_ATTR_BEACON_INTERVAL, 610 NL80211_ATTR_DTIM_PERIOD, 611 NL80211_ATTR_BEACON_HEAD, 612 NL80211_ATTR_BEACON_TAIL, 613 614 NL80211_ATTR_STA_AID, 615 NL80211_ATTR_STA_FLAGS, 616 NL80211_ATTR_STA_LISTEN_INTERVAL, 617 NL80211_ATTR_STA_SUPPORTED_RATES, 618 NL80211_ATTR_STA_VLAN, 619 NL80211_ATTR_STA_INFO, 620 621 NL80211_ATTR_WIPHY_BANDS, 622 623 NL80211_ATTR_MNTR_FLAGS, 624 625 NL80211_ATTR_MESH_ID, 626 NL80211_ATTR_STA_PLINK_ACTION, 627 NL80211_ATTR_MPATH_NEXT_HOP, 628 NL80211_ATTR_MPATH_INFO, 629 630 NL80211_ATTR_BSS_CTS_PROT, 631 NL80211_ATTR_BSS_SHORT_PREAMBLE, 632 NL80211_ATTR_BSS_SHORT_SLOT_TIME, 633 634 NL80211_ATTR_HT_CAPABILITY, 635 636 NL80211_ATTR_SUPPORTED_IFTYPES, 637 638 NL80211_ATTR_REG_ALPHA2, 639 NL80211_ATTR_REG_RULES, 640 641 NL80211_ATTR_MESH_PARAMS, 642 643 NL80211_ATTR_BSS_BASIC_RATES, 644 645 NL80211_ATTR_WIPHY_TXQ_PARAMS, 646 NL80211_ATTR_WIPHY_FREQ, 647 NL80211_ATTR_WIPHY_CHANNEL_TYPE, 648 649 NL80211_ATTR_KEY_DEFAULT_MGMT, 650 651 NL80211_ATTR_MGMT_SUBTYPE, 652 NL80211_ATTR_IE, 653 654 NL80211_ATTR_MAX_NUM_SCAN_SSIDS, 655 656 NL80211_ATTR_SCAN_FREQUENCIES, 657 NL80211_ATTR_SCAN_SSIDS, 658 NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ 659 NL80211_ATTR_BSS, 660 661 NL80211_ATTR_REG_INITIATOR, 662 NL80211_ATTR_REG_TYPE, 663 664 NL80211_ATTR_SUPPORTED_COMMANDS, 665 666 NL80211_ATTR_FRAME, 667 NL80211_ATTR_SSID, 668 NL80211_ATTR_AUTH_TYPE, 669 NL80211_ATTR_REASON_CODE, 670 671 NL80211_ATTR_KEY_TYPE, 672 673 NL80211_ATTR_MAX_SCAN_IE_LEN, 674 NL80211_ATTR_CIPHER_SUITES, 675 676 NL80211_ATTR_FREQ_BEFORE, 677 NL80211_ATTR_FREQ_AFTER, 678 679 NL80211_ATTR_FREQ_FIXED, 680 681 682 NL80211_ATTR_WIPHY_RETRY_SHORT, 683 NL80211_ATTR_WIPHY_RETRY_LONG, 684 NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 685 NL80211_ATTR_WIPHY_RTS_THRESHOLD, 686 687 NL80211_ATTR_TIMED_OUT, 688 689 NL80211_ATTR_USE_MFP, 690 691 NL80211_ATTR_STA_FLAGS2, 692 693 NL80211_ATTR_CONTROL_PORT, 694 695 NL80211_ATTR_TESTDATA, 696 697 NL80211_ATTR_PRIVACY, 698 699 NL80211_ATTR_DISCONNECTED_BY_AP, 700 NL80211_ATTR_STATUS_CODE, 701 702 NL80211_ATTR_CIPHER_SUITES_PAIRWISE, 703 NL80211_ATTR_CIPHER_SUITE_GROUP, 704 NL80211_ATTR_WPA_VERSIONS, 705 NL80211_ATTR_AKM_SUITES, 706 707 NL80211_ATTR_REQ_IE, 708 NL80211_ATTR_RESP_IE, 709 710 NL80211_ATTR_PREV_BSSID, 711 712 NL80211_ATTR_KEY, 713 NL80211_ATTR_KEYS, 714 715 NL80211_ATTR_PID, 716 717 /* add attributes here, update the policy in nl80211.c */ 718 719 __NL80211_ATTR_AFTER_LAST, 720 NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 721 }; 722 723 /* source-level API compatibility */ 724 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION 725 726 /* 727 * Allow user space programs to use #ifdef on new attributes by defining them 728 * here 729 */ 730 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT 731 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY 732 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES 733 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS 734 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ 735 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE 736 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE 737 #define NL80211_ATTR_IE NL80211_ATTR_IE 738 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR 739 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE 740 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME 741 #define NL80211_ATTR_SSID NL80211_ATTR_SSID 742 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE 743 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE 744 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE 745 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP 746 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS 747 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES 748 #define NL80211_ATTR_KEY NL80211_ATTR_KEY 749 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS 750 751 #define NL80211_MAX_SUPP_RATES 32 752 #define NL80211_MAX_SUPP_REG_RULES 32 753 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 754 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 755 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 756 #define NL80211_HT_CAPABILITY_LEN 26 757 758 #define NL80211_MAX_NR_CIPHER_SUITES 5 759 #define NL80211_MAX_NR_AKM_SUITES 2 760 761 /** 762 * enum nl80211_iftype - (virtual) interface types 763 * 764 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides 765 * @NL80211_IFTYPE_ADHOC: independent BSS member 766 * @NL80211_IFTYPE_STATION: managed BSS member 767 * @NL80211_IFTYPE_AP: access point 768 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points 769 * @NL80211_IFTYPE_WDS: wireless distribution interface 770 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames 771 * @NL80211_IFTYPE_MESH_POINT: mesh point 772 * @NL80211_IFTYPE_MAX: highest interface type number currently defined 773 * @__NL80211_IFTYPE_AFTER_LAST: internal use 774 * 775 * These values are used with the %NL80211_ATTR_IFTYPE 776 * to set the type of an interface. 777 * 778 */ 779 enum nl80211_iftype { 780 NL80211_IFTYPE_UNSPECIFIED, 781 NL80211_IFTYPE_ADHOC, 782 NL80211_IFTYPE_STATION, 783 NL80211_IFTYPE_AP, 784 NL80211_IFTYPE_AP_VLAN, 785 NL80211_IFTYPE_WDS, 786 NL80211_IFTYPE_MONITOR, 787 NL80211_IFTYPE_MESH_POINT, 788 789 /* keep last */ 790 __NL80211_IFTYPE_AFTER_LAST, 791 NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1 792 }; 793 794 /** 795 * enum nl80211_sta_flags - station flags 796 * 797 * Station flags. When a station is added to an AP interface, it is 798 * assumed to be already associated (and hence authenticated.) 799 * 800 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) 801 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames 802 * with short barker preamble 803 * @NL80211_STA_FLAG_WME: station is WME/QoS capable 804 * @NL80211_STA_FLAG_MFP: station uses management frame protection 805 */ 806 enum nl80211_sta_flags { 807 __NL80211_STA_FLAG_INVALID, 808 NL80211_STA_FLAG_AUTHORIZED, 809 NL80211_STA_FLAG_SHORT_PREAMBLE, 810 NL80211_STA_FLAG_WME, 811 NL80211_STA_FLAG_MFP, 812 813 /* keep last */ 814 __NL80211_STA_FLAG_AFTER_LAST, 815 NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 816 }; 817 818 /** 819 * struct nl80211_sta_flag_update - station flags mask/set 820 * @mask: mask of station flags to set 821 * @set: which values to set them to 822 * 823 * Both mask and set contain bits as per &enum nl80211_sta_flags. 824 */ 825 struct nl80211_sta_flag_update { 826 __u32 mask; 827 __u32 set; 828 } __attribute__((packed)); 829 830 /** 831 * enum nl80211_rate_info - bitrate information 832 * 833 * These attribute types are used with %NL80211_STA_INFO_TXRATE 834 * when getting information about the bitrate of a station. 835 * 836 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved 837 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) 838 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) 839 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate 840 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval 841 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined 842 * @__NL80211_RATE_INFO_AFTER_LAST: internal use 843 */ 844 enum nl80211_rate_info { 845 __NL80211_RATE_INFO_INVALID, 846 NL80211_RATE_INFO_BITRATE, 847 NL80211_RATE_INFO_MCS, 848 NL80211_RATE_INFO_40_MHZ_WIDTH, 849 NL80211_RATE_INFO_SHORT_GI, 850 851 /* keep last */ 852 __NL80211_RATE_INFO_AFTER_LAST, 853 NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 854 }; 855 856 /** 857 * enum nl80211_sta_info - station information 858 * 859 * These attribute types are used with %NL80211_ATTR_STA_INFO 860 * when getting information about a station. 861 * 862 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved 863 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) 864 * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) 865 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) 866 * @__NL80211_STA_INFO_AFTER_LAST: internal 867 * @NL80211_STA_INFO_MAX: highest possible station info attribute 868 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) 869 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute 870 * containing info as possible, see &enum nl80211_sta_info_txrate. 871 * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) 872 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this 873 * station) 874 */ 875 enum nl80211_sta_info { 876 __NL80211_STA_INFO_INVALID, 877 NL80211_STA_INFO_INACTIVE_TIME, 878 NL80211_STA_INFO_RX_BYTES, 879 NL80211_STA_INFO_TX_BYTES, 880 NL80211_STA_INFO_LLID, 881 NL80211_STA_INFO_PLID, 882 NL80211_STA_INFO_PLINK_STATE, 883 NL80211_STA_INFO_SIGNAL, 884 NL80211_STA_INFO_TX_BITRATE, 885 NL80211_STA_INFO_RX_PACKETS, 886 NL80211_STA_INFO_TX_PACKETS, 887 888 /* keep last */ 889 __NL80211_STA_INFO_AFTER_LAST, 890 NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 891 }; 892 893 /** 894 * enum nl80211_mpath_flags - nl80211 mesh path flags 895 * 896 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active 897 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running 898 * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN 899 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set 900 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded 901 */ 902 enum nl80211_mpath_flags { 903 NL80211_MPATH_FLAG_ACTIVE = 1<<0, 904 NL80211_MPATH_FLAG_RESOLVING = 1<<1, 905 NL80211_MPATH_FLAG_DSN_VALID = 1<<2, 906 NL80211_MPATH_FLAG_FIXED = 1<<3, 907 NL80211_MPATH_FLAG_RESOLVED = 1<<4, 908 }; 909 910 /** 911 * enum nl80211_mpath_info - mesh path information 912 * 913 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting 914 * information about a mesh path. 915 * 916 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved 917 * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination 918 * @NL80211_ATTR_MPATH_DSN: destination sequence number 919 * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path 920 * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now 921 * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in 922 * &enum nl80211_mpath_flags; 923 * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec 924 * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries 925 */ 926 enum nl80211_mpath_info { 927 __NL80211_MPATH_INFO_INVALID, 928 NL80211_MPATH_INFO_FRAME_QLEN, 929 NL80211_MPATH_INFO_DSN, 930 NL80211_MPATH_INFO_METRIC, 931 NL80211_MPATH_INFO_EXPTIME, 932 NL80211_MPATH_INFO_FLAGS, 933 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, 934 NL80211_MPATH_INFO_DISCOVERY_RETRIES, 935 936 /* keep last */ 937 __NL80211_MPATH_INFO_AFTER_LAST, 938 NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 939 }; 940 941 /** 942 * enum nl80211_band_attr - band attributes 943 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved 944 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, 945 * an array of nested frequency attributes 946 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, 947 * an array of nested bitrate attributes 948 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as 949 * defined in 802.11n 950 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE 951 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n 952 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n 953 */ 954 enum nl80211_band_attr { 955 __NL80211_BAND_ATTR_INVALID, 956 NL80211_BAND_ATTR_FREQS, 957 NL80211_BAND_ATTR_RATES, 958 959 NL80211_BAND_ATTR_HT_MCS_SET, 960 NL80211_BAND_ATTR_HT_CAPA, 961 NL80211_BAND_ATTR_HT_AMPDU_FACTOR, 962 NL80211_BAND_ATTR_HT_AMPDU_DENSITY, 963 964 /* keep last */ 965 __NL80211_BAND_ATTR_AFTER_LAST, 966 NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 967 }; 968 969 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA 970 971 /** 972 * enum nl80211_frequency_attr - frequency attributes 973 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz 974 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current 975 * regulatory domain. 976 * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is 977 * permitted on this channel in current regulatory domain. 978 * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted 979 * on this channel in current regulatory domain. 980 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory 981 * on this channel in current regulatory domain. 982 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm 983 * (100 * dBm). 984 */ 985 enum nl80211_frequency_attr { 986 __NL80211_FREQUENCY_ATTR_INVALID, 987 NL80211_FREQUENCY_ATTR_FREQ, 988 NL80211_FREQUENCY_ATTR_DISABLED, 989 NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, 990 NL80211_FREQUENCY_ATTR_NO_IBSS, 991 NL80211_FREQUENCY_ATTR_RADAR, 992 NL80211_FREQUENCY_ATTR_MAX_TX_POWER, 993 994 /* keep last */ 995 __NL80211_FREQUENCY_ATTR_AFTER_LAST, 996 NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 997 }; 998 999 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER 1000 1001 /** 1002 * enum nl80211_bitrate_attr - bitrate attributes 1003 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps 1004 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported 1005 * in 2.4 GHz band. 1006 */ 1007 enum nl80211_bitrate_attr { 1008 __NL80211_BITRATE_ATTR_INVALID, 1009 NL80211_BITRATE_ATTR_RATE, 1010 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, 1011 1012 /* keep last */ 1013 __NL80211_BITRATE_ATTR_AFTER_LAST, 1014 NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 1015 }; 1016 1017 /** 1018 * enum nl80211_initiator - Indicates the initiator of a reg domain request 1019 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world 1020 * regulatory domain. 1021 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the 1022 * regulatory domain. 1023 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the 1024 * wireless core it thinks its knows the regulatory domain we should be in. 1025 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 1026 * 802.11 country information element with regulatory information it 1027 * thinks we should consider. 1028 */ 1029 enum nl80211_reg_initiator { 1030 NL80211_REGDOM_SET_BY_CORE, 1031 NL80211_REGDOM_SET_BY_USER, 1032 NL80211_REGDOM_SET_BY_DRIVER, 1033 NL80211_REGDOM_SET_BY_COUNTRY_IE, 1034 }; 1035 1036 /** 1037 * enum nl80211_reg_type - specifies the type of regulatory domain 1038 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains 1039 * to a specific country. When this is set you can count on the 1040 * ISO / IEC 3166 alpha2 country code being valid. 1041 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory 1042 * domain. 1043 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom 1044 * driver specific world regulatory domain. These do not apply system-wide 1045 * and are only applicable to the individual devices which have requested 1046 * them to be applied. 1047 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product 1048 * of an intersection between two regulatory domains -- the previously 1049 * set regulatory domain on the system and the last accepted regulatory 1050 * domain request to be processed. 1051 */ 1052 enum nl80211_reg_type { 1053 NL80211_REGDOM_TYPE_COUNTRY, 1054 NL80211_REGDOM_TYPE_WORLD, 1055 NL80211_REGDOM_TYPE_CUSTOM_WORLD, 1056 NL80211_REGDOM_TYPE_INTERSECTION, 1057 }; 1058 1059 /** 1060 * enum nl80211_reg_rule_attr - regulatory rule attributes 1061 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional 1062 * considerations for a given frequency range. These are the 1063 * &enum nl80211_reg_rule_flags. 1064 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory 1065 * rule in KHz. This is not a center of frequency but an actual regulatory 1066 * band edge. 1067 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule 1068 * in KHz. This is not a center a frequency but an actual regulatory 1069 * band edge. 1070 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this 1071 * frequency range, in KHz. 1072 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain 1073 * for a given frequency range. The value is in mBi (100 * dBi). 1074 * If you don't have one then don't send this. 1075 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for 1076 * a given frequency range. The value is in mBm (100 * dBm). 1077 */ 1078 enum nl80211_reg_rule_attr { 1079 __NL80211_REG_RULE_ATTR_INVALID, 1080 NL80211_ATTR_REG_RULE_FLAGS, 1081 1082 NL80211_ATTR_FREQ_RANGE_START, 1083 NL80211_ATTR_FREQ_RANGE_END, 1084 NL80211_ATTR_FREQ_RANGE_MAX_BW, 1085 1086 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, 1087 NL80211_ATTR_POWER_RULE_MAX_EIRP, 1088 1089 /* keep last */ 1090 __NL80211_REG_RULE_ATTR_AFTER_LAST, 1091 NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 1092 }; 1093 1094 /** 1095 * enum nl80211_reg_rule_flags - regulatory rule flags 1096 * 1097 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed 1098 * @NL80211_RRF_NO_CCK: CCK modulation not allowed 1099 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed 1100 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed 1101 * @NL80211_RRF_DFS: DFS support is required to be used 1102 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links 1103 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links 1104 * @NL80211_RRF_PASSIVE_SCAN: passive scan is required 1105 * @NL80211_RRF_NO_IBSS: no IBSS is allowed 1106 */ 1107 enum nl80211_reg_rule_flags { 1108 NL80211_RRF_NO_OFDM = 1<<0, 1109 NL80211_RRF_NO_CCK = 1<<1, 1110 NL80211_RRF_NO_INDOOR = 1<<2, 1111 NL80211_RRF_NO_OUTDOOR = 1<<3, 1112 NL80211_RRF_DFS = 1<<4, 1113 NL80211_RRF_PTP_ONLY = 1<<5, 1114 NL80211_RRF_PTMP_ONLY = 1<<6, 1115 NL80211_RRF_PASSIVE_SCAN = 1<<7, 1116 NL80211_RRF_NO_IBSS = 1<<8, 1117 }; 1118 1119 /** 1120 * enum nl80211_mntr_flags - monitor configuration flags 1121 * 1122 * Monitor configuration flags. 1123 * 1124 * @__NL80211_MNTR_FLAG_INVALID: reserved 1125 * 1126 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS 1127 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP 1128 * @NL80211_MNTR_FLAG_CONTROL: pass control frames 1129 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering 1130 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. 1131 * overrides all other flags. 1132 * 1133 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use 1134 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag 1135 */ 1136 enum nl80211_mntr_flags { 1137 __NL80211_MNTR_FLAG_INVALID, 1138 NL80211_MNTR_FLAG_FCSFAIL, 1139 NL80211_MNTR_FLAG_PLCPFAIL, 1140 NL80211_MNTR_FLAG_CONTROL, 1141 NL80211_MNTR_FLAG_OTHER_BSS, 1142 NL80211_MNTR_FLAG_COOK_FRAMES, 1143 1144 /* keep last */ 1145 __NL80211_MNTR_FLAG_AFTER_LAST, 1146 NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 1147 }; 1148 1149 /** 1150 * enum nl80211_meshconf_params - mesh configuration parameters 1151 * 1152 * Mesh configuration parameters 1153 * 1154 * @__NL80211_MESHCONF_INVALID: internal use 1155 * 1156 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in 1157 * millisecond units, used by the Peer Link Open message 1158 * 1159 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in 1160 * millisecond units, used by the peer link management to close a peer link 1161 * 1162 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in 1163 * millisecond units 1164 * 1165 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed 1166 * on this mesh interface 1167 * 1168 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link 1169 * open retries that can be sent to establish a new peer link instance in a 1170 * mesh 1171 * 1172 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh 1173 * point. 1174 * 1175 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically 1176 * open peer links when we detect compatible mesh peers. 1177 * 1178 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames 1179 * containing a PREQ that an MP can send to a particular destination (path 1180 * target) 1181 * 1182 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths 1183 * (in milliseconds) 1184 * 1185 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait 1186 * until giving up on a path discovery (in milliseconds) 1187 * 1188 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh 1189 * points receiving a PREQ shall consider the forwarding information from the 1190 * root to be valid. (TU = time unit) 1191 * 1192 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in 1193 * TUs) during which an MP can send only one action frame containing a PREQ 1194 * reference element 1195 * 1196 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) 1197 * that it takes for an HWMP information element to propagate across the mesh 1198 * 1199 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute 1200 * 1201 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use 1202 */ 1203 enum nl80211_meshconf_params { 1204 __NL80211_MESHCONF_INVALID, 1205 NL80211_MESHCONF_RETRY_TIMEOUT, 1206 NL80211_MESHCONF_CONFIRM_TIMEOUT, 1207 NL80211_MESHCONF_HOLDING_TIMEOUT, 1208 NL80211_MESHCONF_MAX_PEER_LINKS, 1209 NL80211_MESHCONF_MAX_RETRIES, 1210 NL80211_MESHCONF_TTL, 1211 NL80211_MESHCONF_AUTO_OPEN_PLINKS, 1212 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, 1213 NL80211_MESHCONF_PATH_REFRESH_TIME, 1214 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, 1215 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, 1216 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, 1217 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, 1218 1219 /* keep last */ 1220 __NL80211_MESHCONF_ATTR_AFTER_LAST, 1221 NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 1222 }; 1223 1224 /** 1225 * enum nl80211_txq_attr - TX queue parameter attributes 1226 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved 1227 * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) 1228 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning 1229 * disabled 1230 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form 1231 * 2^n-1 in the range 1..32767] 1232 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form 1233 * 2^n-1 in the range 1..32767] 1234 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] 1235 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 1236 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number 1237 */ 1238 enum nl80211_txq_attr { 1239 __NL80211_TXQ_ATTR_INVALID, 1240 NL80211_TXQ_ATTR_QUEUE, 1241 NL80211_TXQ_ATTR_TXOP, 1242 NL80211_TXQ_ATTR_CWMIN, 1243 NL80211_TXQ_ATTR_CWMAX, 1244 NL80211_TXQ_ATTR_AIFS, 1245 1246 /* keep last */ 1247 __NL80211_TXQ_ATTR_AFTER_LAST, 1248 NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 1249 }; 1250 1251 enum nl80211_txq_q { 1252 NL80211_TXQ_Q_VO, 1253 NL80211_TXQ_Q_VI, 1254 NL80211_TXQ_Q_BE, 1255 NL80211_TXQ_Q_BK 1256 }; 1257 1258 enum nl80211_channel_type { 1259 NL80211_CHAN_NO_HT, 1260 NL80211_CHAN_HT20, 1261 NL80211_CHAN_HT40MINUS, 1262 NL80211_CHAN_HT40PLUS 1263 }; 1264 1265 /** 1266 * enum nl80211_bss - netlink attributes for a BSS 1267 * 1268 * @__NL80211_BSS_INVALID: invalid 1269 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) 1270 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) 1271 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) 1272 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) 1273 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the 1274 * raw information elements from the probe response/beacon (bin) 1275 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon 1276 * in mBm (100 * dBm) (s32) 1277 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon 1278 * in unspecified units, scaled to 0..100 (u8) 1279 * @NL80211_BSS_STATUS: status, if this BSS is "used" 1280 * @__NL80211_BSS_AFTER_LAST: internal 1281 * @NL80211_BSS_MAX: highest BSS attribute 1282 */ 1283 enum nl80211_bss { 1284 __NL80211_BSS_INVALID, 1285 NL80211_BSS_BSSID, 1286 NL80211_BSS_FREQUENCY, 1287 NL80211_BSS_TSF, 1288 NL80211_BSS_BEACON_INTERVAL, 1289 NL80211_BSS_CAPABILITY, 1290 NL80211_BSS_INFORMATION_ELEMENTS, 1291 NL80211_BSS_SIGNAL_MBM, 1292 NL80211_BSS_SIGNAL_UNSPEC, 1293 NL80211_BSS_STATUS, 1294 1295 /* keep last */ 1296 __NL80211_BSS_AFTER_LAST, 1297 NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 1298 }; 1299 1300 /** 1301 * enum nl80211_bss_status - BSS "status" 1302 */ 1303 enum nl80211_bss_status { 1304 NL80211_BSS_STATUS_AUTHENTICATED, 1305 NL80211_BSS_STATUS_ASSOCIATED, 1306 NL80211_BSS_STATUS_IBSS_JOINED, 1307 }; 1308 1309 /** 1310 * enum nl80211_auth_type - AuthenticationType 1311 * 1312 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication 1313 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) 1314 * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) 1315 * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) 1316 * @__NL80211_AUTHTYPE_NUM: internal 1317 * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm 1318 * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by 1319 * trying multiple times); this is invalid in netlink -- leave out 1320 * the attribute for this on CONNECT commands. 1321 */ 1322 enum nl80211_auth_type { 1323 NL80211_AUTHTYPE_OPEN_SYSTEM, 1324 NL80211_AUTHTYPE_SHARED_KEY, 1325 NL80211_AUTHTYPE_FT, 1326 NL80211_AUTHTYPE_NETWORK_EAP, 1327 1328 /* keep last */ 1329 __NL80211_AUTHTYPE_NUM, 1330 NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, 1331 NL80211_AUTHTYPE_AUTOMATIC 1332 }; 1333 1334 /** 1335 * enum nl80211_key_type - Key Type 1336 * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key 1337 * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key 1338 * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) 1339 */ 1340 enum nl80211_key_type { 1341 NL80211_KEYTYPE_GROUP, 1342 NL80211_KEYTYPE_PAIRWISE, 1343 NL80211_KEYTYPE_PEERKEY, 1344 }; 1345 1346 /** 1347 * enum nl80211_mfp - Management frame protection state 1348 * @NL80211_MFP_NO: Management frame protection not used 1349 * @NL80211_MFP_REQUIRED: Management frame protection required 1350 */ 1351 enum nl80211_mfp { 1352 NL80211_MFP_NO, 1353 NL80211_MFP_REQUIRED, 1354 }; 1355 1356 enum nl80211_wpa_versions { 1357 NL80211_WPA_VERSION_1 = 1 << 0, 1358 NL80211_WPA_VERSION_2 = 1 << 1, 1359 }; 1360 1361 /** 1362 * enum nl80211_key_attributes - key attributes 1363 * @__NL80211_KEY_INVALID: invalid 1364 * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of 1365 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 1366 * keys 1367 * @NL80211_KEY_IDX: key ID (u8, 0-3) 1368 * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 1369 * section 7.3.2.25.1, e.g. 0x000FAC04) 1370 * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 1371 * CCMP keys, each six bytes in little endian 1372 * @NL80211_KEY_DEFAULT: flag indicating default key 1373 * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key 1374 * @__NL80211_KEY_AFTER_LAST: internal 1375 * @NL80211_KEY_MAX: highest key attribute 1376 */ 1377 enum nl80211_key_attributes { 1378 __NL80211_KEY_INVALID, 1379 NL80211_KEY_DATA, 1380 NL80211_KEY_IDX, 1381 NL80211_KEY_CIPHER, 1382 NL80211_KEY_SEQ, 1383 NL80211_KEY_DEFAULT, 1384 NL80211_KEY_DEFAULT_MGMT, 1385 1386 /* keep last */ 1387 __NL80211_KEY_AFTER_LAST, 1388 NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 1389 }; 1390 1391 #endif /* __LINUX_NL80211_H */ 1392
