1 /* 2 * jcdctmgr.c 3 * 4 * This file was part of the Independent JPEG Group's software: 5 * Copyright (C) 1994-1996, Thomas G. Lane. 6 * libjpeg-turbo Modifications: 7 * Copyright (C) 1999-2006, MIYASAKA Masaru. 8 * Copyright 2009 Pierre Ossman <ossman (at) cendio.se> for Cendio AB 9 * Copyright (C) 2011, 2014-2015 D. R. Commander 10 * For conditions of distribution and use, see the accompanying README file. 11 * 12 * This file contains the forward-DCT management logic. 13 * This code selects a particular DCT implementation to be used, 14 * and it performs related housekeeping chores including coefficient 15 * quantization. 16 */ 17 18 #define JPEG_INTERNALS 19 #include "jinclude.h" 20 #include "jpeglib.h" 21 #include "jdct.h" /* Private declarations for DCT subsystem */ 22 #include "jsimddct.h" 23 24 25 /* Private subobject for this module */ 26 27 typedef void (*forward_DCT_method_ptr) (DCTELEM * data); 28 typedef void (*float_DCT_method_ptr) (FAST_FLOAT * data); 29 30 typedef void (*convsamp_method_ptr) (JSAMPARRAY sample_data, 31 JDIMENSION start_col, 32 DCTELEM * workspace); 33 typedef void (*float_convsamp_method_ptr) (JSAMPARRAY sample_data, 34 JDIMENSION start_col, 35 FAST_FLOAT *workspace); 36 37 typedef void (*quantize_method_ptr) (JCOEFPTR coef_block, DCTELEM * divisors, 38 DCTELEM * workspace); 39 typedef void (*float_quantize_method_ptr) (JCOEFPTR coef_block, 40 FAST_FLOAT * divisors, 41 FAST_FLOAT * workspace); 42 43 METHODDEF(void) quantize (JCOEFPTR, DCTELEM *, DCTELEM *); 44 45 typedef struct { 46 struct jpeg_forward_dct pub; /* public fields */ 47 48 /* Pointer to the DCT routine actually in use */ 49 forward_DCT_method_ptr dct; 50 convsamp_method_ptr convsamp; 51 quantize_method_ptr quantize; 52 53 /* The actual post-DCT divisors --- not identical to the quant table 54 * entries, because of scaling (especially for an unnormalized DCT). 55 * Each table is given in normal array order. 56 */ 57 DCTELEM * divisors[NUM_QUANT_TBLS]; 58 59 /* work area for FDCT subroutine */ 60 DCTELEM * workspace; 61 62 #ifdef DCT_FLOAT_SUPPORTED 63 /* Same as above for the floating-point case. */ 64 float_DCT_method_ptr float_dct; 65 float_convsamp_method_ptr float_convsamp; 66 float_quantize_method_ptr float_quantize; 67 FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; 68 FAST_FLOAT * float_workspace; 69 #endif 70 } my_fdct_controller; 71 72 typedef my_fdct_controller * my_fdct_ptr; 73 74 75 #if BITS_IN_JSAMPLE == 8 76 77 /* 78 * Find the highest bit in an integer through binary search. 79 */ 80 81 LOCAL(int) 82 flss (UINT16 val) 83 { 84 int bit; 85 86 bit = 16; 87 88 if (!val) 89 return 0; 90 91 if (!(val & 0xff00)) { 92 bit -= 8; 93 val <<= 8; 94 } 95 if (!(val & 0xf000)) { 96 bit -= 4; 97 val <<= 4; 98 } 99 if (!(val & 0xc000)) { 100 bit -= 2; 101 val <<= 2; 102 } 103 if (!(val & 0x8000)) { 104 bit -= 1; 105 val <<= 1; 106 } 107 108 return bit; 109 } 110 111 112 /* 113 * Compute values to do a division using reciprocal. 114 * 115 * This implementation is based on an algorithm described in 116 * "How to optimize for the Pentium family of microprocessors" 117 * (http://www.agner.org/assem/). 118 * More information about the basic algorithm can be found in 119 * the paper "Integer Division Using Reciprocals" by Robert Alverson. 120 * 121 * The basic idea is to replace x/d by x * d^-1. In order to store 122 * d^-1 with enough precision we shift it left a few places. It turns 123 * out that this algoright gives just enough precision, and also fits 124 * into DCTELEM: 125 * 126 * b = (the number of significant bits in divisor) - 1 127 * r = (word size) + b 128 * f = 2^r / divisor 129 * 130 * f will not be an integer for most cases, so we need to compensate 131 * for the rounding error introduced: 132 * 133 * no fractional part: 134 * 135 * result = input >> r 136 * 137 * fractional part of f < 0.5: 138 * 139 * round f down to nearest integer 140 * result = ((input + 1) * f) >> r 141 * 142 * fractional part of f > 0.5: 143 * 144 * round f up to nearest integer 145 * result = (input * f) >> r 146 * 147 * This is the original algorithm that gives truncated results. But we 148 * want properly rounded results, so we replace "input" with 149 * "input + divisor/2". 150 * 151 * In order to allow SIMD implementations we also tweak the values to 152 * allow the same calculation to be made at all times: 153 * 154 * dctbl[0] = f rounded to nearest integer 155 * dctbl[1] = divisor / 2 (+ 1 if fractional part of f < 0.5) 156 * dctbl[2] = 1 << ((word size) * 2 - r) 157 * dctbl[3] = r - (word size) 158 * 159 * dctbl[2] is for stupid instruction sets where the shift operation 160 * isn't member wise (e.g. MMX). 161 * 162 * The reason dctbl[2] and dctbl[3] reduce the shift with (word size) 163 * is that most SIMD implementations have a "multiply and store top 164 * half" operation. 165 * 166 * Lastly, we store each of the values in their own table instead 167 * of in a consecutive manner, yet again in order to allow SIMD 168 * routines. 169 */ 170 171 LOCAL(int) 172 compute_reciprocal (UINT16 divisor, DCTELEM * dtbl) 173 { 174 UDCTELEM2 fq, fr; 175 UDCTELEM c; 176 int b, r; 177 178 if (divisor == 1) { 179 /* divisor == 1 means unquantized, so these reciprocal/correction/shift 180 * values will cause the C quantization algorithm to act like the 181 * identity function. Since only the C quantization algorithm is used in 182 * these cases, the scale value is irrelevant. 183 */ 184 dtbl[DCTSIZE2 * 0] = (DCTELEM) 1; /* reciprocal */ 185 dtbl[DCTSIZE2 * 1] = (DCTELEM) 0; /* correction */ 186 dtbl[DCTSIZE2 * 2] = (DCTELEM) 1; /* scale */ 187 dtbl[DCTSIZE2 * 3] = (DCTELEM) (-sizeof(DCTELEM) * 8); /* shift */ 188 return 0; 189 } 190 191 b = flss(divisor) - 1; 192 r = sizeof(DCTELEM) * 8 + b; 193 194 fq = ((UDCTELEM2)1 << r) / divisor; 195 fr = ((UDCTELEM2)1 << r) % divisor; 196 197 c = divisor / 2; /* for rounding */ 198 199 if (fr == 0) { /* divisor is power of two */ 200 /* fq will be one bit too large to fit in DCTELEM, so adjust */ 201 fq >>= 1; 202 r--; 203 } else if (fr <= (divisor / 2U)) { /* fractional part is < 0.5 */ 204 c++; 205 } else { /* fractional part is > 0.5 */ 206 fq++; 207 } 208 209 dtbl[DCTSIZE2 * 0] = (DCTELEM) fq; /* reciprocal */ 210 dtbl[DCTSIZE2 * 1] = (DCTELEM) c; /* correction + roundfactor */ 211 dtbl[DCTSIZE2 * 2] = (DCTELEM) (1 << (sizeof(DCTELEM)*8*2 - r)); /* scale */ 212 dtbl[DCTSIZE2 * 3] = (DCTELEM) r - sizeof(DCTELEM)*8; /* shift */ 213 214 if(r <= 16) return 0; 215 else return 1; 216 } 217 218 #endif 219 220 221 /* 222 * Initialize for a processing pass. 223 * Verify that all referenced Q-tables are present, and set up 224 * the divisor table for each one. 225 * In the current implementation, DCT of all components is done during 226 * the first pass, even if only some components will be output in the 227 * first scan. Hence all components should be examined here. 228 */ 229 230 METHODDEF(void) 231 start_pass_fdctmgr (j_compress_ptr cinfo) 232 { 233 my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; 234 int ci, qtblno, i; 235 jpeg_component_info *compptr; 236 JQUANT_TBL * qtbl; 237 DCTELEM * dtbl; 238 239 for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; 240 ci++, compptr++) { 241 qtblno = compptr->quant_tbl_no; 242 /* Make sure specified quantization table is present */ 243 if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || 244 cinfo->quant_tbl_ptrs[qtblno] == NULL) 245 ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); 246 qtbl = cinfo->quant_tbl_ptrs[qtblno]; 247 /* Compute divisors for this quant table */ 248 /* We may do this more than once for same table, but it's not a big deal */ 249 switch (cinfo->dct_method) { 250 #ifdef DCT_ISLOW_SUPPORTED 251 case JDCT_ISLOW: 252 /* For LL&M IDCT method, divisors are equal to raw quantization 253 * coefficients multiplied by 8 (to counteract scaling). 254 */ 255 if (fdct->divisors[qtblno] == NULL) { 256 fdct->divisors[qtblno] = (DCTELEM *) 257 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 258 (DCTSIZE2 * 4) * sizeof(DCTELEM)); 259 } 260 dtbl = fdct->divisors[qtblno]; 261 for (i = 0; i < DCTSIZE2; i++) { 262 #if BITS_IN_JSAMPLE == 8 263 if(!compute_reciprocal(qtbl->quantval[i] << 3, &dtbl[i]) 264 && fdct->quantize == jsimd_quantize) 265 fdct->quantize = quantize; 266 #else 267 dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3; 268 #endif 269 } 270 break; 271 #endif 272 #ifdef DCT_IFAST_SUPPORTED 273 case JDCT_IFAST: 274 { 275 /* For AA&N IDCT method, divisors are equal to quantization 276 * coefficients scaled by scalefactor[row]*scalefactor[col], where 277 * scalefactor[0] = 1 278 * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 279 * We apply a further scale factor of 8. 280 */ 281 #define CONST_BITS 14 282 static const INT16 aanscales[DCTSIZE2] = { 283 /* precomputed values scaled up by 14 bits */ 284 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, 285 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, 286 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, 287 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, 288 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, 289 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, 290 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, 291 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 292 }; 293 SHIFT_TEMPS 294 295 if (fdct->divisors[qtblno] == NULL) { 296 fdct->divisors[qtblno] = (DCTELEM *) 297 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 298 (DCTSIZE2 * 4) * sizeof(DCTELEM)); 299 } 300 dtbl = fdct->divisors[qtblno]; 301 for (i = 0; i < DCTSIZE2; i++) { 302 #if BITS_IN_JSAMPLE == 8 303 if(!compute_reciprocal( 304 DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], 305 (INT32) aanscales[i]), 306 CONST_BITS-3), &dtbl[i]) 307 && fdct->quantize == jsimd_quantize) 308 fdct->quantize = quantize; 309 #else 310 dtbl[i] = (DCTELEM) 311 DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], 312 (INT32) aanscales[i]), 313 CONST_BITS-3); 314 #endif 315 } 316 } 317 break; 318 #endif 319 #ifdef DCT_FLOAT_SUPPORTED 320 case JDCT_FLOAT: 321 { 322 /* For float AA&N IDCT method, divisors are equal to quantization 323 * coefficients scaled by scalefactor[row]*scalefactor[col], where 324 * scalefactor[0] = 1 325 * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 326 * We apply a further scale factor of 8. 327 * What's actually stored is 1/divisor so that the inner loop can 328 * use a multiplication rather than a division. 329 */ 330 FAST_FLOAT * fdtbl; 331 int row, col; 332 static const double aanscalefactor[DCTSIZE] = { 333 1.0, 1.387039845, 1.306562965, 1.175875602, 334 1.0, 0.785694958, 0.541196100, 0.275899379 335 }; 336 337 if (fdct->float_divisors[qtblno] == NULL) { 338 fdct->float_divisors[qtblno] = (FAST_FLOAT *) 339 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 340 DCTSIZE2 * sizeof(FAST_FLOAT)); 341 } 342 fdtbl = fdct->float_divisors[qtblno]; 343 i = 0; 344 for (row = 0; row < DCTSIZE; row++) { 345 for (col = 0; col < DCTSIZE; col++) { 346 fdtbl[i] = (FAST_FLOAT) 347 (1.0 / (((double) qtbl->quantval[i] * 348 aanscalefactor[row] * aanscalefactor[col] * 8.0))); 349 i++; 350 } 351 } 352 } 353 break; 354 #endif 355 default: 356 ERREXIT(cinfo, JERR_NOT_COMPILED); 357 break; 358 } 359 } 360 } 361 362 363 /* 364 * Load data into workspace, applying unsigned->signed conversion. 365 */ 366 367 METHODDEF(void) 368 convsamp (JSAMPARRAY sample_data, JDIMENSION start_col, DCTELEM * workspace) 369 { 370 register DCTELEM *workspaceptr; 371 register JSAMPROW elemptr; 372 register int elemr; 373 374 workspaceptr = workspace; 375 for (elemr = 0; elemr < DCTSIZE; elemr++) { 376 elemptr = sample_data[elemr] + start_col; 377 378 #if DCTSIZE == 8 /* unroll the inner loop */ 379 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 380 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 381 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 382 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 383 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 384 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 385 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 386 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 387 #else 388 { 389 register int elemc; 390 for (elemc = DCTSIZE; elemc > 0; elemc--) 391 *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; 392 } 393 #endif 394 } 395 } 396 397 398 /* 399 * Quantize/descale the coefficients, and store into coef_blocks[]. 400 */ 401 402 METHODDEF(void) 403 quantize (JCOEFPTR coef_block, DCTELEM * divisors, DCTELEM * workspace) 404 { 405 int i; 406 DCTELEM temp; 407 JCOEFPTR output_ptr = coef_block; 408 409 #if BITS_IN_JSAMPLE == 8 410 411 UDCTELEM recip, corr; 412 int shift; 413 UDCTELEM2 product; 414 415 for (i = 0; i < DCTSIZE2; i++) { 416 temp = workspace[i]; 417 recip = divisors[i + DCTSIZE2 * 0]; 418 corr = divisors[i + DCTSIZE2 * 1]; 419 shift = divisors[i + DCTSIZE2 * 3]; 420 421 if (temp < 0) { 422 temp = -temp; 423 product = (UDCTELEM2)(temp + corr) * recip; 424 product >>= shift + sizeof(DCTELEM)*8; 425 temp = product; 426 temp = -temp; 427 } else { 428 product = (UDCTELEM2)(temp + corr) * recip; 429 product >>= shift + sizeof(DCTELEM)*8; 430 temp = product; 431 } 432 output_ptr[i] = (JCOEF) temp; 433 } 434 435 #else 436 437 register DCTELEM qval; 438 439 for (i = 0; i < DCTSIZE2; i++) { 440 qval = divisors[i]; 441 temp = workspace[i]; 442 /* Divide the coefficient value by qval, ensuring proper rounding. 443 * Since C does not specify the direction of rounding for negative 444 * quotients, we have to force the dividend positive for portability. 445 * 446 * In most files, at least half of the output values will be zero 447 * (at default quantization settings, more like three-quarters...) 448 * so we should ensure that this case is fast. On many machines, 449 * a comparison is enough cheaper than a divide to make a special test 450 * a win. Since both inputs will be nonnegative, we need only test 451 * for a < b to discover whether a/b is 0. 452 * If your machine's division is fast enough, define FAST_DIVIDE. 453 */ 454 #ifdef FAST_DIVIDE 455 #define DIVIDE_BY(a,b) a /= b 456 #else 457 #define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 458 #endif 459 if (temp < 0) { 460 temp = -temp; 461 temp += qval>>1; /* for rounding */ 462 DIVIDE_BY(temp, qval); 463 temp = -temp; 464 } else { 465 temp += qval>>1; /* for rounding */ 466 DIVIDE_BY(temp, qval); 467 } 468 output_ptr[i] = (JCOEF) temp; 469 } 470 471 #endif 472 473 } 474 475 476 /* 477 * Perform forward DCT on one or more blocks of a component. 478 * 479 * The input samples are taken from the sample_data[] array starting at 480 * position start_row/start_col, and moving to the right for any additional 481 * blocks. The quantized coefficients are returned in coef_blocks[]. 482 */ 483 484 METHODDEF(void) 485 forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, 486 JSAMPARRAY sample_data, JBLOCKROW coef_blocks, 487 JDIMENSION start_row, JDIMENSION start_col, 488 JDIMENSION num_blocks) 489 /* This version is used for integer DCT implementations. */ 490 { 491 /* This routine is heavily used, so it's worth coding it tightly. */ 492 my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; 493 DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; 494 DCTELEM * workspace; 495 JDIMENSION bi; 496 497 /* Make sure the compiler doesn't look up these every pass */ 498 forward_DCT_method_ptr do_dct = fdct->dct; 499 convsamp_method_ptr do_convsamp = fdct->convsamp; 500 quantize_method_ptr do_quantize = fdct->quantize; 501 workspace = fdct->workspace; 502 503 sample_data += start_row; /* fold in the vertical offset once */ 504 505 for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { 506 /* Load data into workspace, applying unsigned->signed conversion */ 507 (*do_convsamp) (sample_data, start_col, workspace); 508 509 /* Perform the DCT */ 510 (*do_dct) (workspace); 511 512 /* Quantize/descale the coefficients, and store into coef_blocks[] */ 513 (*do_quantize) (coef_blocks[bi], divisors, workspace); 514 } 515 } 516 517 518 #ifdef DCT_FLOAT_SUPPORTED 519 520 521 METHODDEF(void) 522 convsamp_float (JSAMPARRAY sample_data, JDIMENSION start_col, FAST_FLOAT * workspace) 523 { 524 register FAST_FLOAT *workspaceptr; 525 register JSAMPROW elemptr; 526 register int elemr; 527 528 workspaceptr = workspace; 529 for (elemr = 0; elemr < DCTSIZE; elemr++) { 530 elemptr = sample_data[elemr] + start_col; 531 #if DCTSIZE == 8 /* unroll the inner loop */ 532 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 533 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 534 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 535 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 536 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 537 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 538 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 539 *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 540 #else 541 { 542 register int elemc; 543 for (elemc = DCTSIZE; elemc > 0; elemc--) 544 *workspaceptr++ = (FAST_FLOAT) 545 (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); 546 } 547 #endif 548 } 549 } 550 551 552 METHODDEF(void) 553 quantize_float (JCOEFPTR coef_block, FAST_FLOAT * divisors, FAST_FLOAT * workspace) 554 { 555 register FAST_FLOAT temp; 556 register int i; 557 register JCOEFPTR output_ptr = coef_block; 558 559 for (i = 0; i < DCTSIZE2; i++) { 560 /* Apply the quantization and scaling factor */ 561 temp = workspace[i] * divisors[i]; 562 563 /* Round to nearest integer. 564 * Since C does not specify the direction of rounding for negative 565 * quotients, we have to force the dividend positive for portability. 566 * The maximum coefficient size is +-16K (for 12-bit data), so this 567 * code should work for either 16-bit or 32-bit ints. 568 */ 569 output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); 570 } 571 } 572 573 574 METHODDEF(void) 575 forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, 576 JSAMPARRAY sample_data, JBLOCKROW coef_blocks, 577 JDIMENSION start_row, JDIMENSION start_col, 578 JDIMENSION num_blocks) 579 /* This version is used for floating-point DCT implementations. */ 580 { 581 /* This routine is heavily used, so it's worth coding it tightly. */ 582 my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; 583 FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; 584 FAST_FLOAT * workspace; 585 JDIMENSION bi; 586 587 588 /* Make sure the compiler doesn't look up these every pass */ 589 float_DCT_method_ptr do_dct = fdct->float_dct; 590 float_convsamp_method_ptr do_convsamp = fdct->float_convsamp; 591 float_quantize_method_ptr do_quantize = fdct->float_quantize; 592 workspace = fdct->float_workspace; 593 594 sample_data += start_row; /* fold in the vertical offset once */ 595 596 for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { 597 /* Load data into workspace, applying unsigned->signed conversion */ 598 (*do_convsamp) (sample_data, start_col, workspace); 599 600 /* Perform the DCT */ 601 (*do_dct) (workspace); 602 603 /* Quantize/descale the coefficients, and store into coef_blocks[] */ 604 (*do_quantize) (coef_blocks[bi], divisors, workspace); 605 } 606 } 607 608 #endif /* DCT_FLOAT_SUPPORTED */ 609 610 611 /* 612 * Initialize FDCT manager. 613 */ 614 615 GLOBAL(void) 616 jinit_forward_dct (j_compress_ptr cinfo) 617 { 618 my_fdct_ptr fdct; 619 int i; 620 621 fdct = (my_fdct_ptr) 622 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 623 sizeof(my_fdct_controller)); 624 cinfo->fdct = (struct jpeg_forward_dct *) fdct; 625 fdct->pub.start_pass = start_pass_fdctmgr; 626 627 /* First determine the DCT... */ 628 switch (cinfo->dct_method) { 629 #ifdef DCT_ISLOW_SUPPORTED 630 case JDCT_ISLOW: 631 fdct->pub.forward_DCT = forward_DCT; 632 if (jsimd_can_fdct_islow()) 633 fdct->dct = jsimd_fdct_islow; 634 else 635 fdct->dct = jpeg_fdct_islow; 636 break; 637 #endif 638 #ifdef DCT_IFAST_SUPPORTED 639 case JDCT_IFAST: 640 fdct->pub.forward_DCT = forward_DCT; 641 if (jsimd_can_fdct_ifast()) 642 fdct->dct = jsimd_fdct_ifast; 643 else 644 fdct->dct = jpeg_fdct_ifast; 645 break; 646 #endif 647 #ifdef DCT_FLOAT_SUPPORTED 648 case JDCT_FLOAT: 649 fdct->pub.forward_DCT = forward_DCT_float; 650 if (jsimd_can_fdct_float()) 651 fdct->float_dct = jsimd_fdct_float; 652 else 653 fdct->float_dct = jpeg_fdct_float; 654 break; 655 #endif 656 default: 657 ERREXIT(cinfo, JERR_NOT_COMPILED); 658 break; 659 } 660 661 /* ...then the supporting stages. */ 662 switch (cinfo->dct_method) { 663 #ifdef DCT_ISLOW_SUPPORTED 664 case JDCT_ISLOW: 665 #endif 666 #ifdef DCT_IFAST_SUPPORTED 667 case JDCT_IFAST: 668 #endif 669 #if defined(DCT_ISLOW_SUPPORTED) || defined(DCT_IFAST_SUPPORTED) 670 if (jsimd_can_convsamp()) 671 fdct->convsamp = jsimd_convsamp; 672 else 673 fdct->convsamp = convsamp; 674 if (jsimd_can_quantize()) 675 fdct->quantize = jsimd_quantize; 676 else 677 fdct->quantize = quantize; 678 break; 679 #endif 680 #ifdef DCT_FLOAT_SUPPORTED 681 case JDCT_FLOAT: 682 if (jsimd_can_convsamp_float()) 683 fdct->float_convsamp = jsimd_convsamp_float; 684 else 685 fdct->float_convsamp = convsamp_float; 686 if (jsimd_can_quantize_float()) 687 fdct->float_quantize = jsimd_quantize_float; 688 else 689 fdct->float_quantize = quantize_float; 690 break; 691 #endif 692 default: 693 ERREXIT(cinfo, JERR_NOT_COMPILED); 694 break; 695 } 696 697 /* Allocate workspace memory */ 698 #ifdef DCT_FLOAT_SUPPORTED 699 if (cinfo->dct_method == JDCT_FLOAT) 700 fdct->float_workspace = (FAST_FLOAT *) 701 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 702 sizeof(FAST_FLOAT) * DCTSIZE2); 703 else 704 #endif 705 fdct->workspace = (DCTELEM *) 706 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 707 sizeof(DCTELEM) * DCTSIZE2); 708 709 /* Mark divisor tables unallocated */ 710 for (i = 0; i < NUM_QUANT_TBLS; i++) { 711 fdct->divisors[i] = NULL; 712 #ifdef DCT_FLOAT_SUPPORTED 713 fdct->float_divisors[i] = NULL; 714 #endif 715 } 716 } 717