1 /***************************************************************************/ 2 /* */ 3 /* cffgload.c */ 4 /* */ 5 /* OpenType Glyph Loader (body). */ 6 /* */ 7 /* Copyright 1996-2016 by */ 8 /* David Turner, Robert Wilhelm, and Werner Lemberg. */ 9 /* */ 10 /* This file is part of the FreeType project, and may only be used, */ 11 /* modified, and distributed under the terms of the FreeType project */ 12 /* license, LICENSE.TXT. By continuing to use, modify, or distribute */ 13 /* this file you indicate that you have read the license and */ 14 /* understand and accept it fully. */ 15 /* */ 16 /***************************************************************************/ 17 18 19 #include <ft2build.h> 20 #include FT_INTERNAL_DEBUG_H 21 #include FT_INTERNAL_STREAM_H 22 #include FT_INTERNAL_SFNT_H 23 #include FT_OUTLINE_H 24 #include FT_CFF_DRIVER_H 25 26 #include "cffobjs.h" 27 #include "cffload.h" 28 #include "cffgload.h" 29 #include "cf2ft.h" /* for cf2_decoder_parse_charstrings */ 30 31 #include "cfferrs.h" 32 33 34 /*************************************************************************/ 35 /* */ 36 /* The macro FT_COMPONENT is used in trace mode. It is an implicit */ 37 /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */ 38 /* messages during execution. */ 39 /* */ 40 #undef FT_COMPONENT 41 #define FT_COMPONENT trace_cffgload 42 43 44 #ifdef CFF_CONFIG_OPTION_OLD_ENGINE 45 46 typedef enum CFF_Operator_ 47 { 48 cff_op_unknown = 0, 49 50 cff_op_rmoveto, 51 cff_op_hmoveto, 52 cff_op_vmoveto, 53 54 cff_op_rlineto, 55 cff_op_hlineto, 56 cff_op_vlineto, 57 58 cff_op_rrcurveto, 59 cff_op_hhcurveto, 60 cff_op_hvcurveto, 61 cff_op_rcurveline, 62 cff_op_rlinecurve, 63 cff_op_vhcurveto, 64 cff_op_vvcurveto, 65 66 cff_op_flex, 67 cff_op_hflex, 68 cff_op_hflex1, 69 cff_op_flex1, 70 71 cff_op_endchar, 72 73 cff_op_hstem, 74 cff_op_vstem, 75 cff_op_hstemhm, 76 cff_op_vstemhm, 77 78 cff_op_hintmask, 79 cff_op_cntrmask, 80 cff_op_dotsection, /* deprecated, acts as no-op */ 81 82 cff_op_abs, 83 cff_op_add, 84 cff_op_sub, 85 cff_op_div, 86 cff_op_neg, 87 cff_op_random, 88 cff_op_mul, 89 cff_op_sqrt, 90 91 cff_op_blend, 92 93 cff_op_drop, 94 cff_op_exch, 95 cff_op_index, 96 cff_op_roll, 97 cff_op_dup, 98 99 cff_op_put, 100 cff_op_get, 101 cff_op_store, 102 cff_op_load, 103 104 cff_op_and, 105 cff_op_or, 106 cff_op_not, 107 cff_op_eq, 108 cff_op_ifelse, 109 110 cff_op_callsubr, 111 cff_op_callgsubr, 112 cff_op_return, 113 114 /* Type 1 opcodes: invalid but seen in real life */ 115 cff_op_hsbw, 116 cff_op_closepath, 117 cff_op_callothersubr, 118 cff_op_pop, 119 cff_op_seac, 120 cff_op_sbw, 121 cff_op_setcurrentpoint, 122 123 /* do not remove */ 124 cff_op_max 125 126 } CFF_Operator; 127 128 129 #define CFF_COUNT_CHECK_WIDTH 0x80 130 #define CFF_COUNT_EXACT 0x40 131 #define CFF_COUNT_CLEAR_STACK 0x20 132 133 /* count values which have the `CFF_COUNT_CHECK_WIDTH' flag set are */ 134 /* used for checking the width and requested numbers of arguments */ 135 /* only; they are set to zero afterwards */ 136 137 /* the other two flags are informative only and unused currently */ 138 139 static const FT_Byte cff_argument_counts[] = 140 { 141 0, /* unknown */ 142 143 2 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, /* rmoveto */ 144 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, 145 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, 146 147 0 | CFF_COUNT_CLEAR_STACK, /* rlineto */ 148 0 | CFF_COUNT_CLEAR_STACK, 149 0 | CFF_COUNT_CLEAR_STACK, 150 151 0 | CFF_COUNT_CLEAR_STACK, /* rrcurveto */ 152 0 | CFF_COUNT_CLEAR_STACK, 153 0 | CFF_COUNT_CLEAR_STACK, 154 0 | CFF_COUNT_CLEAR_STACK, 155 0 | CFF_COUNT_CLEAR_STACK, 156 0 | CFF_COUNT_CLEAR_STACK, 157 0 | CFF_COUNT_CLEAR_STACK, 158 159 13, /* flex */ 160 7, 161 9, 162 11, 163 164 0 | CFF_COUNT_CHECK_WIDTH, /* endchar */ 165 166 2 | CFF_COUNT_CHECK_WIDTH, /* hstem */ 167 2 | CFF_COUNT_CHECK_WIDTH, 168 2 | CFF_COUNT_CHECK_WIDTH, 169 2 | CFF_COUNT_CHECK_WIDTH, 170 171 0 | CFF_COUNT_CHECK_WIDTH, /* hintmask */ 172 0 | CFF_COUNT_CHECK_WIDTH, /* cntrmask */ 173 0, /* dotsection */ 174 175 1, /* abs */ 176 2, 177 2, 178 2, 179 1, 180 0, 181 2, 182 1, 183 184 1, /* blend */ 185 186 1, /* drop */ 187 2, 188 1, 189 2, 190 1, 191 192 2, /* put */ 193 1, 194 4, 195 3, 196 197 2, /* and */ 198 2, 199 1, 200 2, 201 4, 202 203 1, /* callsubr */ 204 1, 205 0, 206 207 2, /* hsbw */ 208 0, 209 0, 210 0, 211 5, /* seac */ 212 4, /* sbw */ 213 2 /* setcurrentpoint */ 214 }; 215 216 #endif /* CFF_CONFIG_OPTION_OLD_ENGINE */ 217 218 219 /*************************************************************************/ 220 /*************************************************************************/ 221 /*************************************************************************/ 222 /********** *********/ 223 /********** *********/ 224 /********** GENERIC CHARSTRING PARSING *********/ 225 /********** *********/ 226 /********** *********/ 227 /*************************************************************************/ 228 /*************************************************************************/ 229 /*************************************************************************/ 230 231 232 /*************************************************************************/ 233 /* */ 234 /* <Function> */ 235 /* cff_builder_init */ 236 /* */ 237 /* <Description> */ 238 /* Initializes a given glyph builder. */ 239 /* */ 240 /* <InOut> */ 241 /* builder :: A pointer to the glyph builder to initialize. */ 242 /* */ 243 /* <Input> */ 244 /* face :: The current face object. */ 245 /* */ 246 /* size :: The current size object. */ 247 /* */ 248 /* glyph :: The current glyph object. */ 249 /* */ 250 /* hinting :: Whether hinting is active. */ 251 /* */ 252 static void 253 cff_builder_init( CFF_Builder* builder, 254 TT_Face face, 255 CFF_Size size, 256 CFF_GlyphSlot glyph, 257 FT_Bool hinting ) 258 { 259 builder->path_begun = 0; 260 builder->load_points = 1; 261 262 builder->face = face; 263 builder->glyph = glyph; 264 builder->memory = face->root.memory; 265 266 if ( glyph ) 267 { 268 FT_GlyphLoader loader = glyph->root.internal->loader; 269 270 271 builder->loader = loader; 272 builder->base = &loader->base.outline; 273 builder->current = &loader->current.outline; 274 FT_GlyphLoader_Rewind( loader ); 275 276 builder->hints_globals = NULL; 277 builder->hints_funcs = NULL; 278 279 if ( hinting && size ) 280 { 281 CFF_Internal internal = (CFF_Internal)size->root.internal; 282 283 284 builder->hints_globals = (void *)internal->topfont; 285 builder->hints_funcs = glyph->root.internal->glyph_hints; 286 } 287 } 288 289 builder->pos_x = 0; 290 builder->pos_y = 0; 291 292 builder->left_bearing.x = 0; 293 builder->left_bearing.y = 0; 294 builder->advance.x = 0; 295 builder->advance.y = 0; 296 } 297 298 299 /*************************************************************************/ 300 /* */ 301 /* <Function> */ 302 /* cff_builder_done */ 303 /* */ 304 /* <Description> */ 305 /* Finalizes a given glyph builder. Its contents can still be used */ 306 /* after the call, but the function saves important information */ 307 /* within the corresponding glyph slot. */ 308 /* */ 309 /* <Input> */ 310 /* builder :: A pointer to the glyph builder to finalize. */ 311 /* */ 312 static void 313 cff_builder_done( CFF_Builder* builder ) 314 { 315 CFF_GlyphSlot glyph = builder->glyph; 316 317 318 if ( glyph ) 319 glyph->root.outline = *builder->base; 320 } 321 322 323 /*************************************************************************/ 324 /* */ 325 /* <Function> */ 326 /* cff_compute_bias */ 327 /* */ 328 /* <Description> */ 329 /* Computes the bias value in dependence of the number of glyph */ 330 /* subroutines. */ 331 /* */ 332 /* <Input> */ 333 /* in_charstring_type :: The `CharstringType' value of the top DICT */ 334 /* dictionary. */ 335 /* */ 336 /* num_subrs :: The number of glyph subroutines. */ 337 /* */ 338 /* <Return> */ 339 /* The bias value. */ 340 static FT_Int 341 cff_compute_bias( FT_Int in_charstring_type, 342 FT_UInt num_subrs ) 343 { 344 FT_Int result; 345 346 347 if ( in_charstring_type == 1 ) 348 result = 0; 349 else if ( num_subrs < 1240 ) 350 result = 107; 351 else if ( num_subrs < 33900U ) 352 result = 1131; 353 else 354 result = 32768U; 355 356 return result; 357 } 358 359 360 /*************************************************************************/ 361 /* */ 362 /* <Function> */ 363 /* cff_decoder_init */ 364 /* */ 365 /* <Description> */ 366 /* Initializes a given glyph decoder. */ 367 /* */ 368 /* <InOut> */ 369 /* decoder :: A pointer to the glyph builder to initialize. */ 370 /* */ 371 /* <Input> */ 372 /* face :: The current face object. */ 373 /* */ 374 /* size :: The current size object. */ 375 /* */ 376 /* slot :: The current glyph object. */ 377 /* */ 378 /* hinting :: Whether hinting is active. */ 379 /* */ 380 /* hint_mode :: The hinting mode. */ 381 /* */ 382 FT_LOCAL_DEF( void ) 383 cff_decoder_init( CFF_Decoder* decoder, 384 TT_Face face, 385 CFF_Size size, 386 CFF_GlyphSlot slot, 387 FT_Bool hinting, 388 FT_Render_Mode hint_mode ) 389 { 390 CFF_Font cff = (CFF_Font)face->extra.data; 391 392 393 /* clear everything */ 394 FT_MEM_ZERO( decoder, sizeof ( *decoder ) ); 395 396 /* initialize builder */ 397 cff_builder_init( &decoder->builder, face, size, slot, hinting ); 398 399 /* initialize Type2 decoder */ 400 decoder->cff = cff; 401 decoder->num_globals = cff->global_subrs_index.count; 402 decoder->globals = cff->global_subrs; 403 decoder->globals_bias = cff_compute_bias( 404 cff->top_font.font_dict.charstring_type, 405 decoder->num_globals ); 406 407 decoder->hint_mode = hint_mode; 408 } 409 410 411 /* this function is used to select the subfont */ 412 /* and the locals subrs array */ 413 FT_LOCAL_DEF( FT_Error ) 414 cff_decoder_prepare( CFF_Decoder* decoder, 415 CFF_Size size, 416 FT_UInt glyph_index ) 417 { 418 CFF_Builder *builder = &decoder->builder; 419 CFF_Font cff = (CFF_Font)builder->face->extra.data; 420 CFF_SubFont sub = &cff->top_font; 421 FT_Error error = FT_Err_Ok; 422 423 424 /* manage CID fonts */ 425 if ( cff->num_subfonts ) 426 { 427 FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, glyph_index ); 428 429 430 if ( fd_index >= cff->num_subfonts ) 431 { 432 FT_TRACE4(( "cff_decoder_prepare: invalid CID subfont index\n" )); 433 error = FT_THROW( Invalid_File_Format ); 434 goto Exit; 435 } 436 437 FT_TRACE3(( " in subfont %d:\n", fd_index )); 438 439 sub = cff->subfonts[fd_index]; 440 441 if ( builder->hints_funcs && size ) 442 { 443 CFF_Internal internal = (CFF_Internal)size->root.internal; 444 445 446 /* for CFFs without subfonts, this value has already been set */ 447 builder->hints_globals = (void *)internal->subfonts[fd_index]; 448 } 449 } 450 451 decoder->num_locals = sub->local_subrs_index.count; 452 decoder->locals = sub->local_subrs; 453 decoder->locals_bias = cff_compute_bias( 454 decoder->cff->top_font.font_dict.charstring_type, 455 decoder->num_locals ); 456 457 decoder->glyph_width = sub->private_dict.default_width; 458 decoder->nominal_width = sub->private_dict.nominal_width; 459 460 decoder->current_subfont = sub; /* for Adobe's CFF handler */ 461 462 Exit: 463 return error; 464 } 465 466 467 /* check that there is enough space for `count' more points */ 468 FT_LOCAL_DEF( FT_Error ) 469 cff_check_points( CFF_Builder* builder, 470 FT_Int count ) 471 { 472 return FT_GLYPHLOADER_CHECK_POINTS( builder->loader, count, 0 ); 473 } 474 475 476 /* add a new point, do not check space */ 477 FT_LOCAL_DEF( void ) 478 cff_builder_add_point( CFF_Builder* builder, 479 FT_Pos x, 480 FT_Pos y, 481 FT_Byte flag ) 482 { 483 FT_Outline* outline = builder->current; 484 485 486 if ( builder->load_points ) 487 { 488 FT_Vector* point = outline->points + outline->n_points; 489 FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points; 490 491 #ifdef CFF_CONFIG_OPTION_OLD_ENGINE 492 CFF_Driver driver = (CFF_Driver)FT_FACE_DRIVER( builder->face ); 493 494 495 if ( driver->hinting_engine == FT_CFF_HINTING_FREETYPE ) 496 { 497 point->x = x >> 16; 498 point->y = y >> 16; 499 } 500 else 501 #endif 502 { 503 /* cf2_decoder_parse_charstrings uses 16.16 coordinates */ 504 point->x = x >> 10; 505 point->y = y >> 10; 506 } 507 *control = (FT_Byte)( flag ? FT_CURVE_TAG_ON : FT_CURVE_TAG_CUBIC ); 508 } 509 510 outline->n_points++; 511 } 512 513 514 /* check space for a new on-curve point, then add it */ 515 FT_LOCAL_DEF( FT_Error ) 516 cff_builder_add_point1( CFF_Builder* builder, 517 FT_Pos x, 518 FT_Pos y ) 519 { 520 FT_Error error; 521 522 523 error = cff_check_points( builder, 1 ); 524 if ( !error ) 525 cff_builder_add_point( builder, x, y, 1 ); 526 527 return error; 528 } 529 530 531 /* check space for a new contour, then add it */ 532 static FT_Error 533 cff_builder_add_contour( CFF_Builder* builder ) 534 { 535 FT_Outline* outline = builder->current; 536 FT_Error error; 537 538 539 if ( !builder->load_points ) 540 { 541 outline->n_contours++; 542 return FT_Err_Ok; 543 } 544 545 error = FT_GLYPHLOADER_CHECK_POINTS( builder->loader, 0, 1 ); 546 if ( !error ) 547 { 548 if ( outline->n_contours > 0 ) 549 outline->contours[outline->n_contours - 1] = 550 (short)( outline->n_points - 1 ); 551 552 outline->n_contours++; 553 } 554 555 return error; 556 } 557 558 559 /* if a path was begun, add its first on-curve point */ 560 FT_LOCAL_DEF( FT_Error ) 561 cff_builder_start_point( CFF_Builder* builder, 562 FT_Pos x, 563 FT_Pos y ) 564 { 565 FT_Error error = FT_Err_Ok; 566 567 568 /* test whether we are building a new contour */ 569 if ( !builder->path_begun ) 570 { 571 builder->path_begun = 1; 572 error = cff_builder_add_contour( builder ); 573 if ( !error ) 574 error = cff_builder_add_point1( builder, x, y ); 575 } 576 577 return error; 578 } 579 580 581 /* close the current contour */ 582 FT_LOCAL_DEF( void ) 583 cff_builder_close_contour( CFF_Builder* builder ) 584 { 585 FT_Outline* outline = builder->current; 586 FT_Int first; 587 588 589 if ( !outline ) 590 return; 591 592 first = outline->n_contours <= 1 593 ? 0 : outline->contours[outline->n_contours - 2] + 1; 594 595 /* We must not include the last point in the path if it */ 596 /* is located on the first point. */ 597 if ( outline->n_points > 1 ) 598 { 599 FT_Vector* p1 = outline->points + first; 600 FT_Vector* p2 = outline->points + outline->n_points - 1; 601 FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points - 1; 602 603 604 /* `delete' last point only if it coincides with the first */ 605 /* point and if it is not a control point (which can happen). */ 606 if ( p1->x == p2->x && p1->y == p2->y ) 607 if ( *control == FT_CURVE_TAG_ON ) 608 outline->n_points--; 609 } 610 611 if ( outline->n_contours > 0 ) 612 { 613 /* Don't add contours only consisting of one point, i.e., */ 614 /* check whether begin point and last point are the same. */ 615 if ( first == outline->n_points - 1 ) 616 { 617 outline->n_contours--; 618 outline->n_points--; 619 } 620 else 621 outline->contours[outline->n_contours - 1] = 622 (short)( outline->n_points - 1 ); 623 } 624 } 625 626 627 FT_LOCAL_DEF( FT_Int ) 628 cff_lookup_glyph_by_stdcharcode( CFF_Font cff, 629 FT_Int charcode ) 630 { 631 FT_UInt n; 632 FT_UShort glyph_sid; 633 634 635 /* CID-keyed fonts don't have glyph names */ 636 if ( !cff->charset.sids ) 637 return -1; 638 639 /* check range of standard char code */ 640 if ( charcode < 0 || charcode > 255 ) 641 return -1; 642 643 /* Get code to SID mapping from `cff_standard_encoding'. */ 644 glyph_sid = cff_get_standard_encoding( (FT_UInt)charcode ); 645 646 for ( n = 0; n < cff->num_glyphs; n++ ) 647 { 648 if ( cff->charset.sids[n] == glyph_sid ) 649 return (FT_Int)n; 650 } 651 652 return -1; 653 } 654 655 656 FT_LOCAL_DEF( FT_Error ) 657 cff_get_glyph_data( TT_Face face, 658 FT_UInt glyph_index, 659 FT_Byte** pointer, 660 FT_ULong* length ) 661 { 662 #ifdef FT_CONFIG_OPTION_INCREMENTAL 663 /* For incremental fonts get the character data using the */ 664 /* callback function. */ 665 if ( face->root.internal->incremental_interface ) 666 { 667 FT_Data data; 668 FT_Error error = 669 face->root.internal->incremental_interface->funcs->get_glyph_data( 670 face->root.internal->incremental_interface->object, 671 glyph_index, &data ); 672 673 674 *pointer = (FT_Byte*)data.pointer; 675 *length = (FT_ULong)data.length; 676 677 return error; 678 } 679 else 680 #endif /* FT_CONFIG_OPTION_INCREMENTAL */ 681 682 { 683 CFF_Font cff = (CFF_Font)(face->extra.data); 684 685 686 return cff_index_access_element( &cff->charstrings_index, glyph_index, 687 pointer, length ); 688 } 689 } 690 691 692 FT_LOCAL_DEF( void ) 693 cff_free_glyph_data( TT_Face face, 694 FT_Byte** pointer, 695 FT_ULong length ) 696 { 697 #ifndef FT_CONFIG_OPTION_INCREMENTAL 698 FT_UNUSED( length ); 699 #endif 700 701 #ifdef FT_CONFIG_OPTION_INCREMENTAL 702 /* For incremental fonts get the character data using the */ 703 /* callback function. */ 704 if ( face->root.internal->incremental_interface ) 705 { 706 FT_Data data; 707 708 709 data.pointer = *pointer; 710 data.length = (FT_Int)length; 711 712 face->root.internal->incremental_interface->funcs->free_glyph_data( 713 face->root.internal->incremental_interface->object, &data ); 714 } 715 else 716 #endif /* FT_CONFIG_OPTION_INCREMENTAL */ 717 718 { 719 CFF_Font cff = (CFF_Font)(face->extra.data); 720 721 722 cff_index_forget_element( &cff->charstrings_index, pointer ); 723 } 724 } 725 726 727 #ifdef CFF_CONFIG_OPTION_OLD_ENGINE 728 729 static FT_Error 730 cff_operator_seac( CFF_Decoder* decoder, 731 FT_Pos asb, 732 FT_Pos adx, 733 FT_Pos ady, 734 FT_Int bchar, 735 FT_Int achar ) 736 { 737 FT_Error error; 738 CFF_Builder* builder = &decoder->builder; 739 FT_Int bchar_index, achar_index; 740 TT_Face face = decoder->builder.face; 741 FT_Vector left_bearing, advance; 742 FT_Byte* charstring; 743 FT_ULong charstring_len; 744 FT_Pos glyph_width; 745 746 747 if ( decoder->seac ) 748 { 749 FT_ERROR(( "cff_operator_seac: invalid nested seac\n" )); 750 return FT_THROW( Syntax_Error ); 751 } 752 753 adx += decoder->builder.left_bearing.x; 754 ady += decoder->builder.left_bearing.y; 755 756 #ifdef FT_CONFIG_OPTION_INCREMENTAL 757 /* Incremental fonts don't necessarily have valid charsets. */ 758 /* They use the character code, not the glyph index, in this case. */ 759 if ( face->root.internal->incremental_interface ) 760 { 761 bchar_index = bchar; 762 achar_index = achar; 763 } 764 else 765 #endif /* FT_CONFIG_OPTION_INCREMENTAL */ 766 { 767 CFF_Font cff = (CFF_Font)(face->extra.data); 768 769 770 bchar_index = cff_lookup_glyph_by_stdcharcode( cff, bchar ); 771 achar_index = cff_lookup_glyph_by_stdcharcode( cff, achar ); 772 } 773 774 if ( bchar_index < 0 || achar_index < 0 ) 775 { 776 FT_ERROR(( "cff_operator_seac:" 777 " invalid seac character code arguments\n" )); 778 return FT_THROW( Syntax_Error ); 779 } 780 781 /* If we are trying to load a composite glyph, do not load the */ 782 /* accent character and return the array of subglyphs. */ 783 if ( builder->no_recurse ) 784 { 785 FT_GlyphSlot glyph = (FT_GlyphSlot)builder->glyph; 786 FT_GlyphLoader loader = glyph->internal->loader; 787 FT_SubGlyph subg; 788 789 790 /* reallocate subglyph array if necessary */ 791 error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 ); 792 if ( error ) 793 goto Exit; 794 795 subg = loader->current.subglyphs; 796 797 /* subglyph 0 = base character */ 798 subg->index = bchar_index; 799 subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES | 800 FT_SUBGLYPH_FLAG_USE_MY_METRICS; 801 subg->arg1 = 0; 802 subg->arg2 = 0; 803 subg++; 804 805 /* subglyph 1 = accent character */ 806 subg->index = achar_index; 807 subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES; 808 subg->arg1 = (FT_Int)( adx >> 16 ); 809 subg->arg2 = (FT_Int)( ady >> 16 ); 810 811 /* set up remaining glyph fields */ 812 glyph->num_subglyphs = 2; 813 glyph->subglyphs = loader->base.subglyphs; 814 glyph->format = FT_GLYPH_FORMAT_COMPOSITE; 815 816 loader->current.num_subglyphs = 2; 817 } 818 819 FT_GlyphLoader_Prepare( builder->loader ); 820 821 /* First load `bchar' in builder */ 822 error = cff_get_glyph_data( face, (FT_UInt)bchar_index, 823 &charstring, &charstring_len ); 824 if ( !error ) 825 { 826 /* the seac operator must not be nested */ 827 decoder->seac = TRUE; 828 error = cff_decoder_parse_charstrings( decoder, charstring, 829 charstring_len, 0 ); 830 decoder->seac = FALSE; 831 832 cff_free_glyph_data( face, &charstring, charstring_len ); 833 834 if ( error ) 835 goto Exit; 836 } 837 838 /* Save the left bearing, advance and glyph width of the base */ 839 /* character as they will be erased by the next load. */ 840 841 left_bearing = builder->left_bearing; 842 advance = builder->advance; 843 glyph_width = decoder->glyph_width; 844 845 builder->left_bearing.x = 0; 846 builder->left_bearing.y = 0; 847 848 builder->pos_x = adx - asb; 849 builder->pos_y = ady; 850 851 /* Now load `achar' on top of the base outline. */ 852 error = cff_get_glyph_data( face, (FT_UInt)achar_index, 853 &charstring, &charstring_len ); 854 if ( !error ) 855 { 856 /* the seac operator must not be nested */ 857 decoder->seac = TRUE; 858 error = cff_decoder_parse_charstrings( decoder, charstring, 859 charstring_len, 0 ); 860 decoder->seac = FALSE; 861 862 cff_free_glyph_data( face, &charstring, charstring_len ); 863 864 if ( error ) 865 goto Exit; 866 } 867 868 /* Restore the left side bearing, advance and glyph width */ 869 /* of the base character. */ 870 builder->left_bearing = left_bearing; 871 builder->advance = advance; 872 decoder->glyph_width = glyph_width; 873 874 builder->pos_x = 0; 875 builder->pos_y = 0; 876 877 Exit: 878 return error; 879 } 880 881 882 /*************************************************************************/ 883 /* */ 884 /* <Function> */ 885 /* cff_decoder_parse_charstrings */ 886 /* */ 887 /* <Description> */ 888 /* Parses a given Type 2 charstrings program. */ 889 /* */ 890 /* <InOut> */ 891 /* decoder :: The current Type 1 decoder. */ 892 /* */ 893 /* <Input> */ 894 /* charstring_base :: The base of the charstring stream. */ 895 /* */ 896 /* charstring_len :: The length in bytes of the charstring stream. */ 897 /* */ 898 /* in_dict :: Set to 1 if function is called from top or */ 899 /* private DICT (needed for Multiple Master CFFs). */ 900 /* */ 901 /* <Return> */ 902 /* FreeType error code. 0 means success. */ 903 /* */ 904 FT_LOCAL_DEF( FT_Error ) 905 cff_decoder_parse_charstrings( CFF_Decoder* decoder, 906 FT_Byte* charstring_base, 907 FT_ULong charstring_len, 908 FT_Bool in_dict ) 909 { 910 FT_Error error; 911 CFF_Decoder_Zone* zone; 912 FT_Byte* ip; 913 FT_Byte* limit; 914 CFF_Builder* builder = &decoder->builder; 915 FT_Pos x, y; 916 FT_Fixed seed; 917 FT_Fixed* stack; 918 FT_Int charstring_type = 919 decoder->cff->top_font.font_dict.charstring_type; 920 FT_UShort num_designs = 921 decoder->cff->top_font.font_dict.num_designs; 922 FT_UShort num_axes = 923 decoder->cff->top_font.font_dict.num_axes; 924 925 T2_Hints_Funcs hinter; 926 927 928 /* set default width */ 929 decoder->num_hints = 0; 930 decoder->read_width = 1; 931 932 /* compute random seed from stack address of parameter */ 933 seed = (FT_Fixed)( ( (FT_Offset)(char*)&seed ^ 934 (FT_Offset)(char*)&decoder ^ 935 (FT_Offset)(char*)&charstring_base ) & 936 FT_ULONG_MAX ); 937 seed = ( seed ^ ( seed >> 10 ) ^ ( seed >> 20 ) ) & 0xFFFFL; 938 if ( seed == 0 ) 939 seed = 0x7384; 940 941 /* initialize the decoder */ 942 decoder->top = decoder->stack; 943 decoder->zone = decoder->zones; 944 zone = decoder->zones; 945 stack = decoder->top; 946 947 hinter = (T2_Hints_Funcs)builder->hints_funcs; 948 949 builder->path_begun = 0; 950 951 zone->base = charstring_base; 952 limit = zone->limit = charstring_base + charstring_len; 953 ip = zone->cursor = zone->base; 954 955 error = FT_Err_Ok; 956 957 x = builder->pos_x; 958 y = builder->pos_y; 959 960 /* begin hints recording session, if any */ 961 if ( hinter ) 962 hinter->open( hinter->hints ); 963 964 /* now execute loop */ 965 while ( ip < limit ) 966 { 967 CFF_Operator op; 968 FT_Byte v; 969 970 971 /********************************************************************/ 972 /* */ 973 /* Decode operator or operand */ 974 /* */ 975 v = *ip++; 976 if ( v >= 32 || v == 28 ) 977 { 978 FT_Int shift = 16; 979 FT_Int32 val; 980 981 982 /* this is an operand, push it on the stack */ 983 984 /* if we use shifts, all computations are done with unsigned */ 985 /* values; the conversion to a signed value is the last step */ 986 if ( v == 28 ) 987 { 988 if ( ip + 1 >= limit ) 989 goto Syntax_Error; 990 val = (FT_Short)( ( (FT_UShort)ip[0] << 8 ) | ip[1] ); 991 ip += 2; 992 } 993 else if ( v < 247 ) 994 val = (FT_Int32)v - 139; 995 else if ( v < 251 ) 996 { 997 if ( ip >= limit ) 998 goto Syntax_Error; 999 val = ( (FT_Int32)v - 247 ) * 256 + *ip++ + 108; 1000 } 1001 else if ( v < 255 ) 1002 { 1003 if ( ip >= limit ) 1004 goto Syntax_Error; 1005 val = -( (FT_Int32)v - 251 ) * 256 - *ip++ - 108; 1006 } 1007 else 1008 { 1009 if ( ip + 3 >= limit ) 1010 goto Syntax_Error; 1011 val = (FT_Int32)( ( (FT_UInt32)ip[0] << 24 ) | 1012 ( (FT_UInt32)ip[1] << 16 ) | 1013 ( (FT_UInt32)ip[2] << 8 ) | 1014 (FT_UInt32)ip[3] ); 1015 ip += 4; 1016 if ( charstring_type == 2 ) 1017 shift = 0; 1018 } 1019 if ( decoder->top - stack >= CFF_MAX_OPERANDS ) 1020 goto Stack_Overflow; 1021 1022 val = (FT_Int32)( (FT_UInt32)val << shift ); 1023 *decoder->top++ = val; 1024 1025 #ifdef FT_DEBUG_LEVEL_TRACE 1026 if ( !( val & 0xFFFFL ) ) 1027 FT_TRACE4(( " %hd", (FT_Short)( (FT_UInt32)val >> 16 ) )); 1028 else 1029 FT_TRACE4(( " %.2f", val / 65536.0 )); 1030 #endif 1031 1032 } 1033 else 1034 { 1035 /* The specification says that normally arguments are to be taken */ 1036 /* from the bottom of the stack. However, this seems not to be */ 1037 /* correct, at least for Acroread 7.0.8 on GNU/Linux: It pops the */ 1038 /* arguments similar to a PS interpreter. */ 1039 1040 FT_Fixed* args = decoder->top; 1041 FT_Int num_args = (FT_Int)( args - decoder->stack ); 1042 FT_Int req_args; 1043 1044 1045 /* find operator */ 1046 op = cff_op_unknown; 1047 1048 switch ( v ) 1049 { 1050 case 1: 1051 op = cff_op_hstem; 1052 break; 1053 case 3: 1054 op = cff_op_vstem; 1055 break; 1056 case 4: 1057 op = cff_op_vmoveto; 1058 break; 1059 case 5: 1060 op = cff_op_rlineto; 1061 break; 1062 case 6: 1063 op = cff_op_hlineto; 1064 break; 1065 case 7: 1066 op = cff_op_vlineto; 1067 break; 1068 case 8: 1069 op = cff_op_rrcurveto; 1070 break; 1071 case 9: 1072 op = cff_op_closepath; 1073 break; 1074 case 10: 1075 op = cff_op_callsubr; 1076 break; 1077 case 11: 1078 op = cff_op_return; 1079 break; 1080 case 12: 1081 { 1082 if ( ip >= limit ) 1083 goto Syntax_Error; 1084 v = *ip++; 1085 1086 switch ( v ) 1087 { 1088 case 0: 1089 op = cff_op_dotsection; 1090 break; 1091 case 1: /* this is actually the Type1 vstem3 operator */ 1092 op = cff_op_vstem; 1093 break; 1094 case 2: /* this is actually the Type1 hstem3 operator */ 1095 op = cff_op_hstem; 1096 break; 1097 case 3: 1098 op = cff_op_and; 1099 break; 1100 case 4: 1101 op = cff_op_or; 1102 break; 1103 case 5: 1104 op = cff_op_not; 1105 break; 1106 case 6: 1107 op = cff_op_seac; 1108 break; 1109 case 7: 1110 op = cff_op_sbw; 1111 break; 1112 case 8: 1113 op = cff_op_store; 1114 break; 1115 case 9: 1116 op = cff_op_abs; 1117 break; 1118 case 10: 1119 op = cff_op_add; 1120 break; 1121 case 11: 1122 op = cff_op_sub; 1123 break; 1124 case 12: 1125 op = cff_op_div; 1126 break; 1127 case 13: 1128 op = cff_op_load; 1129 break; 1130 case 14: 1131 op = cff_op_neg; 1132 break; 1133 case 15: 1134 op = cff_op_eq; 1135 break; 1136 case 16: 1137 op = cff_op_callothersubr; 1138 break; 1139 case 17: 1140 op = cff_op_pop; 1141 break; 1142 case 18: 1143 op = cff_op_drop; 1144 break; 1145 case 20: 1146 op = cff_op_put; 1147 break; 1148 case 21: 1149 op = cff_op_get; 1150 break; 1151 case 22: 1152 op = cff_op_ifelse; 1153 break; 1154 case 23: 1155 op = cff_op_random; 1156 break; 1157 case 24: 1158 op = cff_op_mul; 1159 break; 1160 case 26: 1161 op = cff_op_sqrt; 1162 break; 1163 case 27: 1164 op = cff_op_dup; 1165 break; 1166 case 28: 1167 op = cff_op_exch; 1168 break; 1169 case 29: 1170 op = cff_op_index; 1171 break; 1172 case 30: 1173 op = cff_op_roll; 1174 break; 1175 case 33: 1176 op = cff_op_setcurrentpoint; 1177 break; 1178 case 34: 1179 op = cff_op_hflex; 1180 break; 1181 case 35: 1182 op = cff_op_flex; 1183 break; 1184 case 36: 1185 op = cff_op_hflex1; 1186 break; 1187 case 37: 1188 op = cff_op_flex1; 1189 break; 1190 default: 1191 FT_TRACE4(( " unknown op (12, %d)\n", v )); 1192 break; 1193 } 1194 } 1195 break; 1196 case 13: 1197 op = cff_op_hsbw; 1198 break; 1199 case 14: 1200 op = cff_op_endchar; 1201 break; 1202 case 16: 1203 op = cff_op_blend; 1204 break; 1205 case 18: 1206 op = cff_op_hstemhm; 1207 break; 1208 case 19: 1209 op = cff_op_hintmask; 1210 break; 1211 case 20: 1212 op = cff_op_cntrmask; 1213 break; 1214 case 21: 1215 op = cff_op_rmoveto; 1216 break; 1217 case 22: 1218 op = cff_op_hmoveto; 1219 break; 1220 case 23: 1221 op = cff_op_vstemhm; 1222 break; 1223 case 24: 1224 op = cff_op_rcurveline; 1225 break; 1226 case 25: 1227 op = cff_op_rlinecurve; 1228 break; 1229 case 26: 1230 op = cff_op_vvcurveto; 1231 break; 1232 case 27: 1233 op = cff_op_hhcurveto; 1234 break; 1235 case 29: 1236 op = cff_op_callgsubr; 1237 break; 1238 case 30: 1239 op = cff_op_vhcurveto; 1240 break; 1241 case 31: 1242 op = cff_op_hvcurveto; 1243 break; 1244 default: 1245 FT_TRACE4(( " unknown op (%d)\n", v )); 1246 break; 1247 } 1248 1249 if ( op == cff_op_unknown ) 1250 continue; 1251 1252 /* in Multiple Master CFFs, T2 charstrings can appear in */ 1253 /* dictionaries, but some operators are prohibited */ 1254 if ( in_dict ) 1255 { 1256 switch ( op ) 1257 { 1258 case cff_op_hstem: 1259 case cff_op_vstem: 1260 case cff_op_vmoveto: 1261 case cff_op_rlineto: 1262 case cff_op_hlineto: 1263 case cff_op_vlineto: 1264 case cff_op_rrcurveto: 1265 case cff_op_hstemhm: 1266 case cff_op_hintmask: 1267 case cff_op_cntrmask: 1268 case cff_op_rmoveto: 1269 case cff_op_hmoveto: 1270 case cff_op_vstemhm: 1271 case cff_op_rcurveline: 1272 case cff_op_rlinecurve: 1273 case cff_op_vvcurveto: 1274 case cff_op_hhcurveto: 1275 case cff_op_vhcurveto: 1276 case cff_op_hvcurveto: 1277 case cff_op_hflex: 1278 case cff_op_flex: 1279 case cff_op_hflex1: 1280 case cff_op_flex1: 1281 case cff_op_callsubr: 1282 case cff_op_callgsubr: 1283 goto MM_Error; 1284 1285 default: 1286 break; 1287 } 1288 } 1289 1290 /* check arguments */ 1291 req_args = cff_argument_counts[op]; 1292 if ( req_args & CFF_COUNT_CHECK_WIDTH ) 1293 { 1294 if ( num_args > 0 && decoder->read_width ) 1295 { 1296 /* If `nominal_width' is non-zero, the number is really a */ 1297 /* difference against `nominal_width'. Else, the number here */ 1298 /* is truly a width, not a difference against `nominal_width'. */ 1299 /* If the font does not set `nominal_width', then */ 1300 /* `nominal_width' defaults to zero, and so we can set */ 1301 /* `glyph_width' to `nominal_width' plus number on the stack */ 1302 /* -- for either case. */ 1303 1304 FT_Int set_width_ok; 1305 1306 1307 switch ( op ) 1308 { 1309 case cff_op_hmoveto: 1310 case cff_op_vmoveto: 1311 set_width_ok = num_args & 2; 1312 break; 1313 1314 case cff_op_hstem: 1315 case cff_op_vstem: 1316 case cff_op_hstemhm: 1317 case cff_op_vstemhm: 1318 case cff_op_rmoveto: 1319 case cff_op_hintmask: 1320 case cff_op_cntrmask: 1321 set_width_ok = num_args & 1; 1322 break; 1323 1324 case cff_op_endchar: 1325 /* If there is a width specified for endchar, we either have */ 1326 /* 1 argument or 5 arguments. We like to argue. */ 1327 set_width_ok = in_dict 1328 ? 0 1329 : ( ( num_args == 5 ) || ( num_args == 1 ) ); 1330 break; 1331 1332 default: 1333 set_width_ok = 0; 1334 break; 1335 } 1336 1337 if ( set_width_ok ) 1338 { 1339 decoder->glyph_width = decoder->nominal_width + 1340 ( stack[0] >> 16 ); 1341 1342 if ( decoder->width_only ) 1343 { 1344 /* we only want the advance width; stop here */ 1345 break; 1346 } 1347 1348 /* Consumed an argument. */ 1349 num_args--; 1350 } 1351 } 1352 1353 decoder->read_width = 0; 1354 req_args = 0; 1355 } 1356 1357 req_args &= 0x000F; 1358 if ( num_args < req_args ) 1359 goto Stack_Underflow; 1360 args -= req_args; 1361 num_args -= req_args; 1362 1363 /* At this point, `args' points to the first argument of the */ 1364 /* operand in case `req_args' isn't zero. Otherwise, we have */ 1365 /* to adjust `args' manually. */ 1366 1367 /* Note that we only pop arguments from the stack which we */ 1368 /* really need and can digest so that we can continue in case */ 1369 /* of superfluous stack elements. */ 1370 1371 switch ( op ) 1372 { 1373 case cff_op_hstem: 1374 case cff_op_vstem: 1375 case cff_op_hstemhm: 1376 case cff_op_vstemhm: 1377 /* the number of arguments is always even here */ 1378 FT_TRACE4(( 1379 op == cff_op_hstem ? " hstem\n" : 1380 ( op == cff_op_vstem ? " vstem\n" : 1381 ( op == cff_op_hstemhm ? " hstemhm\n" : " vstemhm\n" ) ) )); 1382 1383 if ( hinter ) 1384 hinter->stems( hinter->hints, 1385 ( op == cff_op_hstem || op == cff_op_hstemhm ), 1386 num_args / 2, 1387 args - ( num_args & ~1 ) ); 1388 1389 decoder->num_hints += num_args / 2; 1390 args = stack; 1391 break; 1392 1393 case cff_op_hintmask: 1394 case cff_op_cntrmask: 1395 FT_TRACE4(( op == cff_op_hintmask ? " hintmask" : " cntrmask" )); 1396 1397 /* implement vstem when needed -- */ 1398 /* the specification doesn't say it, but this also works */ 1399 /* with the 'cntrmask' operator */ 1400 /* */ 1401 if ( num_args > 0 ) 1402 { 1403 if ( hinter ) 1404 hinter->stems( hinter->hints, 1405 0, 1406 num_args / 2, 1407 args - ( num_args & ~1 ) ); 1408 1409 decoder->num_hints += num_args / 2; 1410 } 1411 1412 /* In a valid charstring there must be at least one byte */ 1413 /* after `hintmask' or `cntrmask' (e.g., for a `return' */ 1414 /* instruction). Additionally, there must be space for */ 1415 /* `num_hints' bits. */ 1416 1417 if ( ( ip + ( ( decoder->num_hints + 7 ) >> 3 ) ) >= limit ) 1418 goto Syntax_Error; 1419 1420 if ( hinter ) 1421 { 1422 if ( op == cff_op_hintmask ) 1423 hinter->hintmask( hinter->hints, 1424 (FT_UInt)builder->current->n_points, 1425 (FT_UInt)decoder->num_hints, 1426 ip ); 1427 else 1428 hinter->counter( hinter->hints, 1429 (FT_UInt)decoder->num_hints, 1430 ip ); 1431 } 1432 1433 #ifdef FT_DEBUG_LEVEL_TRACE 1434 { 1435 FT_UInt maskbyte; 1436 1437 1438 FT_TRACE4(( " (maskbytes:" )); 1439 1440 for ( maskbyte = 0; 1441 maskbyte < (FT_UInt)( ( decoder->num_hints + 7 ) >> 3 ); 1442 maskbyte++, ip++ ) 1443 FT_TRACE4(( " 0x%02X", *ip )); 1444 1445 FT_TRACE4(( ")\n" )); 1446 } 1447 #else 1448 ip += ( decoder->num_hints + 7 ) >> 3; 1449 #endif 1450 args = stack; 1451 break; 1452 1453 case cff_op_rmoveto: 1454 FT_TRACE4(( " rmoveto\n" )); 1455 1456 cff_builder_close_contour( builder ); 1457 builder->path_begun = 0; 1458 x += args[-2]; 1459 y += args[-1]; 1460 args = stack; 1461 break; 1462 1463 case cff_op_vmoveto: 1464 FT_TRACE4(( " vmoveto\n" )); 1465 1466 cff_builder_close_contour( builder ); 1467 builder->path_begun = 0; 1468 y += args[-1]; 1469 args = stack; 1470 break; 1471 1472 case cff_op_hmoveto: 1473 FT_TRACE4(( " hmoveto\n" )); 1474 1475 cff_builder_close_contour( builder ); 1476 builder->path_begun = 0; 1477 x += args[-1]; 1478 args = stack; 1479 break; 1480 1481 case cff_op_rlineto: 1482 FT_TRACE4(( " rlineto\n" )); 1483 1484 if ( cff_builder_start_point( builder, x, y ) || 1485 cff_check_points( builder, num_args / 2 ) ) 1486 goto Fail; 1487 1488 if ( num_args < 2 ) 1489 goto Stack_Underflow; 1490 1491 args -= num_args & ~1; 1492 while ( args < decoder->top ) 1493 { 1494 x += args[0]; 1495 y += args[1]; 1496 cff_builder_add_point( builder, x, y, 1 ); 1497 args += 2; 1498 } 1499 args = stack; 1500 break; 1501 1502 case cff_op_hlineto: 1503 case cff_op_vlineto: 1504 { 1505 FT_Int phase = ( op == cff_op_hlineto ); 1506 1507 1508 FT_TRACE4(( op == cff_op_hlineto ? " hlineto\n" 1509 : " vlineto\n" )); 1510 1511 if ( num_args < 0 ) 1512 goto Stack_Underflow; 1513 1514 /* there exist subsetted fonts (found in PDFs) */ 1515 /* which call `hlineto' without arguments */ 1516 if ( num_args == 0 ) 1517 break; 1518 1519 if ( cff_builder_start_point( builder, x, y ) || 1520 cff_check_points( builder, num_args ) ) 1521 goto Fail; 1522 1523 args = stack; 1524 while ( args < decoder->top ) 1525 { 1526 if ( phase ) 1527 x += args[0]; 1528 else 1529 y += args[0]; 1530 1531 if ( cff_builder_add_point1( builder, x, y ) ) 1532 goto Fail; 1533 1534 args++; 1535 phase ^= 1; 1536 } 1537 args = stack; 1538 } 1539 break; 1540 1541 case cff_op_rrcurveto: 1542 { 1543 FT_Int nargs; 1544 1545 1546 FT_TRACE4(( " rrcurveto\n" )); 1547 1548 if ( num_args < 6 ) 1549 goto Stack_Underflow; 1550 1551 nargs = num_args - num_args % 6; 1552 1553 if ( cff_builder_start_point( builder, x, y ) || 1554 cff_check_points( builder, nargs / 2 ) ) 1555 goto Fail; 1556 1557 args -= nargs; 1558 while ( args < decoder->top ) 1559 { 1560 x += args[0]; 1561 y += args[1]; 1562 cff_builder_add_point( builder, x, y, 0 ); 1563 x += args[2]; 1564 y += args[3]; 1565 cff_builder_add_point( builder, x, y, 0 ); 1566 x += args[4]; 1567 y += args[5]; 1568 cff_builder_add_point( builder, x, y, 1 ); 1569 args += 6; 1570 } 1571 args = stack; 1572 } 1573 break; 1574 1575 case cff_op_vvcurveto: 1576 { 1577 FT_Int nargs; 1578 1579 1580 FT_TRACE4(( " vvcurveto\n" )); 1581 1582 if ( num_args < 4 ) 1583 goto Stack_Underflow; 1584 1585 /* if num_args isn't of the form 4n or 4n+1, */ 1586 /* we enforce it by clearing the second bit */ 1587 1588 nargs = num_args & ~2; 1589 1590 if ( cff_builder_start_point( builder, x, y ) ) 1591 goto Fail; 1592 1593 args -= nargs; 1594 1595 if ( nargs & 1 ) 1596 { 1597 x += args[0]; 1598 args++; 1599 nargs--; 1600 } 1601 1602 if ( cff_check_points( builder, 3 * ( nargs / 4 ) ) ) 1603 goto Fail; 1604 1605 while ( args < decoder->top ) 1606 { 1607 y += args[0]; 1608 cff_builder_add_point( builder, x, y, 0 ); 1609 x += args[1]; 1610 y += args[2]; 1611 cff_builder_add_point( builder, x, y, 0 ); 1612 y += args[3]; 1613 cff_builder_add_point( builder, x, y, 1 ); 1614 args += 4; 1615 } 1616 args = stack; 1617 } 1618 break; 1619 1620 case cff_op_hhcurveto: 1621 { 1622 FT_Int nargs; 1623 1624 1625 FT_TRACE4(( " hhcurveto\n" )); 1626 1627 if ( num_args < 4 ) 1628 goto Stack_Underflow; 1629 1630 /* if num_args isn't of the form 4n or 4n+1, */ 1631 /* we enforce it by clearing the second bit */ 1632 1633 nargs = num_args & ~2; 1634 1635 if ( cff_builder_start_point( builder, x, y ) ) 1636 goto Fail; 1637 1638 args -= nargs; 1639 if ( nargs & 1 ) 1640 { 1641 y += args[0]; 1642 args++; 1643 nargs--; 1644 } 1645 1646 if ( cff_check_points( builder, 3 * ( nargs / 4 ) ) ) 1647 goto Fail; 1648 1649 while ( args < decoder->top ) 1650 { 1651 x += args[0]; 1652 cff_builder_add_point( builder, x, y, 0 ); 1653 x += args[1]; 1654 y += args[2]; 1655 cff_builder_add_point( builder, x, y, 0 ); 1656 x += args[3]; 1657 cff_builder_add_point( builder, x, y, 1 ); 1658 args += 4; 1659 } 1660 args = stack; 1661 } 1662 break; 1663 1664 case cff_op_vhcurveto: 1665 case cff_op_hvcurveto: 1666 { 1667 FT_Int phase; 1668 FT_Int nargs; 1669 1670 1671 FT_TRACE4(( op == cff_op_vhcurveto ? " vhcurveto\n" 1672 : " hvcurveto\n" )); 1673 1674 if ( cff_builder_start_point( builder, x, y ) ) 1675 goto Fail; 1676 1677 if ( num_args < 4 ) 1678 goto Stack_Underflow; 1679 1680 /* if num_args isn't of the form 8n, 8n+1, 8n+4, or 8n+5, */ 1681 /* we enforce it by clearing the second bit */ 1682 1683 nargs = num_args & ~2; 1684 1685 args -= nargs; 1686 if ( cff_check_points( builder, ( nargs / 4 ) * 3 ) ) 1687 goto Stack_Underflow; 1688 1689 phase = ( op == cff_op_hvcurveto ); 1690 1691 while ( nargs >= 4 ) 1692 { 1693 nargs -= 4; 1694 if ( phase ) 1695 { 1696 x += args[0]; 1697 cff_builder_add_point( builder, x, y, 0 ); 1698 x += args[1]; 1699 y += args[2]; 1700 cff_builder_add_point( builder, x, y, 0 ); 1701 y += args[3]; 1702 if ( nargs == 1 ) 1703 x += args[4]; 1704 cff_builder_add_point( builder, x, y, 1 ); 1705 } 1706 else 1707 { 1708 y += args[0]; 1709 cff_builder_add_point( builder, x, y, 0 ); 1710 x += args[1]; 1711 y += args[2]; 1712 cff_builder_add_point( builder, x, y, 0 ); 1713 x += args[3]; 1714 if ( nargs == 1 ) 1715 y += args[4]; 1716 cff_builder_add_point( builder, x, y, 1 ); 1717 } 1718 args += 4; 1719 phase ^= 1; 1720 } 1721 args = stack; 1722 } 1723 break; 1724 1725 case cff_op_rlinecurve: 1726 { 1727 FT_Int num_lines; 1728 FT_Int nargs; 1729 1730 1731 FT_TRACE4(( " rlinecurve\n" )); 1732 1733 if ( num_args < 8 ) 1734 goto Stack_Underflow; 1735 1736 nargs = num_args & ~1; 1737 num_lines = ( nargs - 6 ) / 2; 1738 1739 if ( cff_builder_start_point( builder, x, y ) || 1740 cff_check_points( builder, num_lines + 3 ) ) 1741 goto Fail; 1742 1743 args -= nargs; 1744 1745 /* first, add the line segments */ 1746 while ( num_lines > 0 ) 1747 { 1748 x += args[0]; 1749 y += args[1]; 1750 cff_builder_add_point( builder, x, y, 1 ); 1751 args += 2; 1752 num_lines--; 1753 } 1754 1755 /* then the curve */ 1756 x += args[0]; 1757 y += args[1]; 1758 cff_builder_add_point( builder, x, y, 0 ); 1759 x += args[2]; 1760 y += args[3]; 1761 cff_builder_add_point( builder, x, y, 0 ); 1762 x += args[4]; 1763 y += args[5]; 1764 cff_builder_add_point( builder, x, y, 1 ); 1765 args = stack; 1766 } 1767 break; 1768 1769 case cff_op_rcurveline: 1770 { 1771 FT_Int num_curves; 1772 FT_Int nargs; 1773 1774 1775 FT_TRACE4(( " rcurveline\n" )); 1776 1777 if ( num_args < 8 ) 1778 goto Stack_Underflow; 1779 1780 nargs = num_args - 2; 1781 nargs = nargs - nargs % 6 + 2; 1782 num_curves = ( nargs - 2 ) / 6; 1783 1784 if ( cff_builder_start_point( builder, x, y ) || 1785 cff_check_points( builder, num_curves * 3 + 2 ) ) 1786 goto Fail; 1787 1788 args -= nargs; 1789 1790 /* first, add the curves */ 1791 while ( num_curves > 0 ) 1792 { 1793 x += args[0]; 1794 y += args[1]; 1795 cff_builder_add_point( builder, x, y, 0 ); 1796 x += args[2]; 1797 y += args[3]; 1798 cff_builder_add_point( builder, x, y, 0 ); 1799 x += args[4]; 1800 y += args[5]; 1801 cff_builder_add_point( builder, x, y, 1 ); 1802 args += 6; 1803 num_curves--; 1804 } 1805 1806 /* then the final line */ 1807 x += args[0]; 1808 y += args[1]; 1809 cff_builder_add_point( builder, x, y, 1 ); 1810 args = stack; 1811 } 1812 break; 1813 1814 case cff_op_hflex1: 1815 { 1816 FT_Pos start_y; 1817 1818 1819 FT_TRACE4(( " hflex1\n" )); 1820 1821 /* adding five more points: 4 control points, 1 on-curve point */ 1822 /* -- make sure we have enough space for the start point if it */ 1823 /* needs to be added */ 1824 if ( cff_builder_start_point( builder, x, y ) || 1825 cff_check_points( builder, 6 ) ) 1826 goto Fail; 1827 1828 /* record the starting point's y position for later use */ 1829 start_y = y; 1830 1831 /* first control point */ 1832 x += args[0]; 1833 y += args[1]; 1834 cff_builder_add_point( builder, x, y, 0 ); 1835 1836 /* second control point */ 1837 x += args[2]; 1838 y += args[3]; 1839 cff_builder_add_point( builder, x, y, 0 ); 1840 1841 /* join point; on curve, with y-value the same as the last */ 1842 /* control point's y-value */ 1843 x += args[4]; 1844 cff_builder_add_point( builder, x, y, 1 ); 1845 1846 /* third control point, with y-value the same as the join */ 1847 /* point's y-value */ 1848 x += args[5]; 1849 cff_builder_add_point( builder, x, y, 0 ); 1850 1851 /* fourth control point */ 1852 x += args[6]; 1853 y += args[7]; 1854 cff_builder_add_point( builder, x, y, 0 ); 1855 1856 /* ending point, with y-value the same as the start */ 1857 x += args[8]; 1858 y = start_y; 1859 cff_builder_add_point( builder, x, y, 1 ); 1860 1861 args = stack; 1862 break; 1863 } 1864 1865 case cff_op_hflex: 1866 { 1867 FT_Pos start_y; 1868 1869 1870 FT_TRACE4(( " hflex\n" )); 1871 1872 /* adding six more points; 4 control points, 2 on-curve points */ 1873 if ( cff_builder_start_point( builder, x, y ) || 1874 cff_check_points( builder, 6 ) ) 1875 goto Fail; 1876 1877 /* record the starting point's y-position for later use */ 1878 start_y = y; 1879 1880 /* first control point */ 1881 x += args[0]; 1882 cff_builder_add_point( builder, x, y, 0 ); 1883 1884 /* second control point */ 1885 x += args[1]; 1886 y += args[2]; 1887 cff_builder_add_point( builder, x, y, 0 ); 1888 1889 /* join point; on curve, with y-value the same as the last */ 1890 /* control point's y-value */ 1891 x += args[3]; 1892 cff_builder_add_point( builder, x, y, 1 ); 1893 1894 /* third control point, with y-value the same as the join */ 1895 /* point's y-value */ 1896 x += args[4]; 1897 cff_builder_add_point( builder, x, y, 0 ); 1898 1899 /* fourth control point */ 1900 x += args[5]; 1901 y = start_y; 1902 cff_builder_add_point( builder, x, y, 0 ); 1903 1904 /* ending point, with y-value the same as the start point's */ 1905 /* y-value -- we don't add this point, though */ 1906 x += args[6]; 1907 cff_builder_add_point( builder, x, y, 1 ); 1908 1909 args = stack; 1910 break; 1911 } 1912 1913 case cff_op_flex1: 1914 { 1915 FT_Pos start_x, start_y; /* record start x, y values for */ 1916 /* alter use */ 1917 FT_Fixed dx = 0, dy = 0; /* used in horizontal/vertical */ 1918 /* algorithm below */ 1919 FT_Int horizontal, count; 1920 FT_Fixed* temp; 1921 1922 1923 FT_TRACE4(( " flex1\n" )); 1924 1925 /* adding six more points; 4 control points, 2 on-curve points */ 1926 if ( cff_builder_start_point( builder, x, y ) || 1927 cff_check_points( builder, 6 ) ) 1928 goto Fail; 1929 1930 /* record the starting point's x, y position for later use */ 1931 start_x = x; 1932 start_y = y; 1933 1934 /* XXX: figure out whether this is supposed to be a horizontal */ 1935 /* or vertical flex; the Type 2 specification is vague... */ 1936 1937 temp = args; 1938 1939 /* grab up to the last argument */ 1940 for ( count = 5; count > 0; count-- ) 1941 { 1942 dx += temp[0]; 1943 dy += temp[1]; 1944 temp += 2; 1945 } 1946 1947 if ( dx < 0 ) 1948 dx = -dx; 1949 if ( dy < 0 ) 1950 dy = -dy; 1951 1952 /* strange test, but here it is... */ 1953 horizontal = ( dx > dy ); 1954 1955 for ( count = 5; count > 0; count-- ) 1956 { 1957 x += args[0]; 1958 y += args[1]; 1959 cff_builder_add_point( builder, x, y, 1960 (FT_Bool)( count == 3 ) ); 1961 args += 2; 1962 } 1963 1964 /* is last operand an x- or y-delta? */ 1965 if ( horizontal ) 1966 { 1967 x += args[0]; 1968 y = start_y; 1969 } 1970 else 1971 { 1972 x = start_x; 1973 y += args[0]; 1974 } 1975 1976 cff_builder_add_point( builder, x, y, 1 ); 1977 1978 args = stack; 1979 break; 1980 } 1981 1982 case cff_op_flex: 1983 { 1984 FT_UInt count; 1985 1986 1987 FT_TRACE4(( " flex\n" )); 1988 1989 if ( cff_builder_start_point( builder, x, y ) || 1990 cff_check_points( builder, 6 ) ) 1991 goto Fail; 1992 1993 for ( count = 6; count > 0; count-- ) 1994 { 1995 x += args[0]; 1996 y += args[1]; 1997 cff_builder_add_point( builder, x, y, 1998 (FT_Bool)( count == 4 || count == 1 ) ); 1999 args += 2; 2000 } 2001 2002 args = stack; 2003 } 2004 break; 2005 2006 case cff_op_seac: 2007 FT_TRACE4(( " seac\n" )); 2008 2009 error = cff_operator_seac( decoder, 2010 args[0], args[1], args[2], 2011 (FT_Int)( args[3] >> 16 ), 2012 (FT_Int)( args[4] >> 16 ) ); 2013 2014 /* add current outline to the glyph slot */ 2015 FT_GlyphLoader_Add( builder->loader ); 2016 2017 /* return now! */ 2018 FT_TRACE4(( "\n" )); 2019 return error; 2020 2021 case cff_op_endchar: 2022 /* in dictionaries, `endchar' simply indicates end of data */ 2023 if ( in_dict ) 2024 return error; 2025 2026 FT_TRACE4(( " endchar\n" )); 2027 2028 /* We are going to emulate the seac operator. */ 2029 if ( num_args >= 4 ) 2030 { 2031 /* Save glyph width so that the subglyphs don't overwrite it. */ 2032 FT_Pos glyph_width = decoder->glyph_width; 2033 2034 2035 error = cff_operator_seac( decoder, 2036 0L, args[-4], args[-3], 2037 (FT_Int)( args[-2] >> 16 ), 2038 (FT_Int)( args[-1] >> 16 ) ); 2039 2040 decoder->glyph_width = glyph_width; 2041 } 2042 else 2043 { 2044 cff_builder_close_contour( builder ); 2045 2046 /* close hints recording session */ 2047 if ( hinter ) 2048 { 2049 if ( hinter->close( hinter->hints, 2050 (FT_UInt)builder->current->n_points ) ) 2051 goto Syntax_Error; 2052 2053 /* apply hints to the loaded glyph outline now */ 2054 error = hinter->apply( hinter->hints, 2055 builder->current, 2056 (PSH_Globals)builder->hints_globals, 2057 decoder->hint_mode ); 2058 if ( error ) 2059 goto Fail; 2060 } 2061 2062 /* add current outline to the glyph slot */ 2063 FT_GlyphLoader_Add( builder->loader ); 2064 } 2065 2066 /* return now! */ 2067 FT_TRACE4(( "\n" )); 2068 return error; 2069 2070 case cff_op_abs: 2071 FT_TRACE4(( " abs\n" )); 2072 2073 if ( args[0] < 0 ) 2074 args[0] = -args[0]; 2075 args++; 2076 break; 2077 2078 case cff_op_add: 2079 FT_TRACE4(( " add\n" )); 2080 2081 args[0] += args[1]; 2082 args++; 2083 break; 2084 2085 case cff_op_sub: 2086 FT_TRACE4(( " sub\n" )); 2087 2088 args[0] -= args[1]; 2089 args++; 2090 break; 2091 2092 case cff_op_div: 2093 FT_TRACE4(( " div\n" )); 2094 2095 args[0] = FT_DivFix( args[0], args[1] ); 2096 args++; 2097 break; 2098 2099 case cff_op_neg: 2100 FT_TRACE4(( " neg\n" )); 2101 2102 args[0] = -args[0]; 2103 args++; 2104 break; 2105 2106 case cff_op_random: 2107 { 2108 FT_Fixed Rand; 2109 2110 2111 FT_TRACE4(( " rand\n" )); 2112 2113 Rand = seed; 2114 if ( Rand >= 0x8000L ) 2115 Rand++; 2116 2117 args[0] = Rand; 2118 seed = FT_MulFix( seed, 0x10000L - seed ); 2119 if ( seed == 0 ) 2120 seed += 0x2873; 2121 args++; 2122 } 2123 break; 2124 2125 case cff_op_mul: 2126 FT_TRACE4(( " mul\n" )); 2127 2128 args[0] = FT_MulFix( args[0], args[1] ); 2129 args++; 2130 break; 2131 2132 case cff_op_sqrt: 2133 FT_TRACE4(( " sqrt\n" )); 2134 2135 if ( args[0] > 0 ) 2136 { 2137 FT_Fixed root = args[0]; 2138 FT_Fixed new_root; 2139 2140 2141 for (;;) 2142 { 2143 new_root = ( root + FT_DivFix( args[0], root ) + 1 ) >> 1; 2144 if ( new_root == root ) 2145 break; 2146 root = new_root; 2147 } 2148 args[0] = new_root; 2149 } 2150 else 2151 args[0] = 0; 2152 args++; 2153 break; 2154 2155 case cff_op_drop: 2156 /* nothing */ 2157 FT_TRACE4(( " drop\n" )); 2158 2159 break; 2160 2161 case cff_op_exch: 2162 { 2163 FT_Fixed tmp; 2164 2165 2166 FT_TRACE4(( " exch\n" )); 2167 2168 tmp = args[0]; 2169 args[0] = args[1]; 2170 args[1] = tmp; 2171 args += 2; 2172 } 2173 break; 2174 2175 case cff_op_index: 2176 { 2177 FT_Int idx = (FT_Int)( args[0] >> 16 ); 2178 2179 2180 FT_TRACE4(( " index\n" )); 2181 2182 if ( idx < 0 ) 2183 idx = 0; 2184 else if ( idx > num_args - 2 ) 2185 idx = num_args - 2; 2186 args[0] = args[-( idx + 1 )]; 2187 args++; 2188 } 2189 break; 2190 2191 case cff_op_roll: 2192 { 2193 FT_Int count = (FT_Int)( args[0] >> 16 ); 2194 FT_Int idx = (FT_Int)( args[1] >> 16 ); 2195 2196 2197 FT_TRACE4(( " roll\n" )); 2198 2199 if ( count <= 0 ) 2200 count = 1; 2201 2202 args -= count; 2203 if ( args < stack ) 2204 goto Stack_Underflow; 2205 2206 if ( idx >= 0 ) 2207 { 2208 while ( idx > 0 ) 2209 { 2210 FT_Fixed tmp = args[count - 1]; 2211 FT_Int i; 2212 2213 2214 for ( i = count - 2; i >= 0; i-- ) 2215 args[i + 1] = args[i]; 2216 args[0] = tmp; 2217 idx--; 2218 } 2219 } 2220 else 2221 { 2222 while ( idx < 0 ) 2223 { 2224 FT_Fixed tmp = args[0]; 2225 FT_Int i; 2226 2227 2228 for ( i = 0; i < count - 1; i++ ) 2229 args[i] = args[i + 1]; 2230 args[count - 1] = tmp; 2231 idx++; 2232 } 2233 } 2234 args += count; 2235 } 2236 break; 2237 2238 case cff_op_dup: 2239 FT_TRACE4(( " dup\n" )); 2240 2241 args[1] = args[0]; 2242 args += 2; 2243 break; 2244 2245 case cff_op_put: 2246 { 2247 FT_Fixed val = args[0]; 2248 FT_Int idx = (FT_Int)( args[1] >> 16 ); 2249 2250 2251 FT_TRACE4(( " put\n" )); 2252 2253 /* the Type2 specification before version 16-March-2000 */ 2254 /* didn't give a hard-coded size limit of the temporary */ 2255 /* storage array; instead, an argument of the */ 2256 /* `MultipleMaster' operator set the size */ 2257 if ( idx >= 0 && idx < CFF_MAX_TRANS_ELEMENTS ) 2258 decoder->buildchar[idx] = val; 2259 } 2260 break; 2261 2262 case cff_op_get: 2263 { 2264 FT_Int idx = (FT_Int)( args[0] >> 16 ); 2265 FT_Fixed val = 0; 2266 2267 2268 FT_TRACE4(( " get\n" )); 2269 2270 if ( idx >= 0 && idx < CFF_MAX_TRANS_ELEMENTS ) 2271 val = decoder->buildchar[idx]; 2272 2273 args[0] = val; 2274 args++; 2275 } 2276 break; 2277 2278 case cff_op_store: 2279 /* this operator was removed from the Type2 specification */ 2280 /* in version 16-March-2000 */ 2281 2282 /* since we currently don't handle interpolation of multiple */ 2283 /* master fonts, this is a no-op */ 2284 FT_TRACE4(( " store\n")); 2285 break; 2286 2287 case cff_op_load: 2288 /* this operator was removed from the Type2 specification */ 2289 /* in version 16-March-2000 */ 2290 { 2291 FT_Int reg_idx = (FT_Int)args[0]; 2292 FT_Int idx = (FT_Int)args[1]; 2293 FT_Int count = (FT_Int)args[2]; 2294 2295 2296 FT_TRACE4(( " load\n" )); 2297 2298 /* since we currently don't handle interpolation of multiple */ 2299 /* master fonts, we store a vector [1 0 0 ...] in the */ 2300 /* temporary storage array regardless of the Registry index */ 2301 if ( reg_idx >= 0 && reg_idx <= 2 && 2302 idx >= 0 && idx < CFF_MAX_TRANS_ELEMENTS && 2303 count >= 0 && count <= num_axes ) 2304 { 2305 FT_Int end, i; 2306 2307 2308 end = FT_MIN( idx + count, CFF_MAX_TRANS_ELEMENTS ); 2309 2310 if ( idx < end ) 2311 decoder->buildchar[idx] = 1 << 16; 2312 2313 for ( i = idx + 1; i < end; i++ ) 2314 decoder->buildchar[i] = 0; 2315 } 2316 } 2317 break; 2318 2319 case cff_op_blend: 2320 /* this operator was removed from the Type2 specification */ 2321 /* in version 16-March-2000 */ 2322 { 2323 FT_Int num_results = (FT_Int)( args[0] >> 16 ); 2324 2325 2326 FT_TRACE4(( " blend\n" )); 2327 2328 if ( num_results < 0 ) 2329 goto Syntax_Error; 2330 2331 if ( num_results * (FT_Int)num_designs > num_args ) 2332 goto Stack_Underflow; 2333 2334 /* since we currently don't handle interpolation of multiple */ 2335 /* master fonts, return the `num_results' values of the */ 2336 /* first master */ 2337 args -= num_results * ( num_designs - 1 ); 2338 num_args -= num_results * ( num_designs - 1 ); 2339 } 2340 break; 2341 2342 case cff_op_dotsection: 2343 /* this operator is deprecated and ignored by the parser */ 2344 FT_TRACE4(( " dotsection\n" )); 2345 break; 2346 2347 case cff_op_closepath: 2348 /* this is an invalid Type 2 operator; however, there */ 2349 /* exist fonts which are incorrectly converted from probably */ 2350 /* Type 1 to CFF, and some parsers seem to accept it */ 2351 2352 FT_TRACE4(( " closepath (invalid op)\n" )); 2353 2354 args = stack; 2355 break; 2356 2357 case cff_op_hsbw: 2358 /* this is an invalid Type 2 operator; however, there */ 2359 /* exist fonts which are incorrectly converted from probably */ 2360 /* Type 1 to CFF, and some parsers seem to accept it */ 2361 2362 FT_TRACE4(( " hsbw (invalid op)\n" )); 2363 2364 decoder->glyph_width = decoder->nominal_width + ( args[1] >> 16 ); 2365 2366 decoder->builder.left_bearing.x = args[0]; 2367 decoder->builder.left_bearing.y = 0; 2368 2369 x = decoder->builder.pos_x + args[0]; 2370 y = decoder->builder.pos_y; 2371 args = stack; 2372 break; 2373 2374 case cff_op_sbw: 2375 /* this is an invalid Type 2 operator; however, there */ 2376 /* exist fonts which are incorrectly converted from probably */ 2377 /* Type 1 to CFF, and some parsers seem to accept it */ 2378 2379 FT_TRACE4(( " sbw (invalid op)\n" )); 2380 2381 decoder->glyph_width = decoder->nominal_width + ( args[2] >> 16 ); 2382 2383 decoder->builder.left_bearing.x = args[0]; 2384 decoder->builder.left_bearing.y = args[1]; 2385 2386 x = decoder->builder.pos_x + args[0]; 2387 y = decoder->builder.pos_y + args[1]; 2388 args = stack; 2389 break; 2390 2391 case cff_op_setcurrentpoint: 2392 /* this is an invalid Type 2 operator; however, there */ 2393 /* exist fonts which are incorrectly converted from probably */ 2394 /* Type 1 to CFF, and some parsers seem to accept it */ 2395 2396 FT_TRACE4(( " setcurrentpoint (invalid op)\n" )); 2397 2398 x = decoder->builder.pos_x + args[0]; 2399 y = decoder->builder.pos_y + args[1]; 2400 args = stack; 2401 break; 2402 2403 case cff_op_callothersubr: 2404 /* this is an invalid Type 2 operator; however, there */ 2405 /* exist fonts which are incorrectly converted from probably */ 2406 /* Type 1 to CFF, and some parsers seem to accept it */ 2407 2408 FT_TRACE4(( " callothersubr (invalid op)\n" )); 2409 2410 /* subsequent `pop' operands should add the arguments, */ 2411 /* this is the implementation described for `unknown' other */ 2412 /* subroutines in the Type1 spec. */ 2413 /* */ 2414 /* XXX Fix return arguments (see discussion below). */ 2415 args -= 2 + ( args[-2] >> 16 ); 2416 if ( args < stack ) 2417 goto Stack_Underflow; 2418 break; 2419 2420 case cff_op_pop: 2421 /* this is an invalid Type 2 operator; however, there */ 2422 /* exist fonts which are incorrectly converted from probably */ 2423 /* Type 1 to CFF, and some parsers seem to accept it */ 2424 2425 FT_TRACE4(( " pop (invalid op)\n" )); 2426 2427 /* XXX Increasing `args' is wrong: After a certain number of */ 2428 /* `pop's we get a stack overflow. Reason for doing it is */ 2429 /* code like this (actually found in a CFF font): */ 2430 /* */ 2431 /* 17 1 3 callothersubr */ 2432 /* pop */ 2433 /* callsubr */ 2434 /* */ 2435 /* Since we handle `callothersubr' as a no-op, and */ 2436 /* `callsubr' needs at least one argument, `pop' can't be a */ 2437 /* no-op too as it basically should be. */ 2438 /* */ 2439 /* The right solution would be to provide real support for */ 2440 /* `callothersubr' as done in `t1decode.c', however, given */ 2441 /* the fact that CFF fonts with `pop' are invalid, it is */ 2442 /* questionable whether it is worth the time. */ 2443 args++; 2444 break; 2445 2446 case cff_op_and: 2447 { 2448 FT_Fixed cond = args[0] && args[1]; 2449 2450 2451 FT_TRACE4(( " and\n" )); 2452 2453 args[0] = cond ? 0x10000L : 0; 2454 args++; 2455 } 2456 break; 2457 2458 case cff_op_or: 2459 { 2460 FT_Fixed cond = args[0] || args[1]; 2461 2462 2463 FT_TRACE4(( " or\n" )); 2464 2465 args[0] = cond ? 0x10000L : 0; 2466 args++; 2467 } 2468 break; 2469 2470 case cff_op_not: 2471 { 2472 FT_Fixed cond = !args[0]; 2473 2474 2475 FT_TRACE4(( " not\n" )); 2476 2477 args[0] = cond ? 0x10000L : 0; 2478 args++; 2479 } 2480 break; 2481 2482 case cff_op_eq: 2483 { 2484 FT_Fixed cond = args[0] == args[1]; 2485 2486 2487 FT_TRACE4(( " eq\n" )); 2488 2489 args[0] = cond ? 0x10000L : 0; 2490 args++; 2491 } 2492 break; 2493 2494 case cff_op_ifelse: 2495 { 2496 FT_Fixed cond = ( args[2] <= args[3] ); 2497 2498 2499 FT_TRACE4(( " ifelse\n" )); 2500 2501 if ( !cond ) 2502 args[0] = args[1]; 2503 args++; 2504 } 2505 break; 2506 2507 case cff_op_callsubr: 2508 { 2509 FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + 2510 decoder->locals_bias ); 2511 2512 2513 FT_TRACE4(( " callsubr (idx %d, entering level %d)\n", 2514 idx, 2515 zone - decoder->zones + 1 )); 2516 2517 if ( idx >= decoder->num_locals ) 2518 { 2519 FT_ERROR(( "cff_decoder_parse_charstrings:" 2520 " invalid local subr index\n" )); 2521 goto Syntax_Error; 2522 } 2523 2524 if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) 2525 { 2526 FT_ERROR(( "cff_decoder_parse_charstrings:" 2527 " too many nested subrs\n" )); 2528 goto Syntax_Error; 2529 } 2530 2531 zone->cursor = ip; /* save current instruction pointer */ 2532 2533 zone++; 2534 zone->base = decoder->locals[idx]; 2535 zone->limit = decoder->locals[idx + 1]; 2536 zone->cursor = zone->base; 2537 2538 if ( !zone->base || zone->limit == zone->base ) 2539 { 2540 FT_ERROR(( "cff_decoder_parse_charstrings:" 2541 " invoking empty subrs\n" )); 2542 goto Syntax_Error; 2543 } 2544 2545 decoder->zone = zone; 2546 ip = zone->base; 2547 limit = zone->limit; 2548 } 2549 break; 2550 2551 case cff_op_callgsubr: 2552 { 2553 FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + 2554 decoder->globals_bias ); 2555 2556 2557 FT_TRACE4(( " callgsubr (idx %d, entering level %d)\n", 2558 idx, 2559 zone - decoder->zones + 1 )); 2560 2561 if ( idx >= decoder->num_globals ) 2562 { 2563 FT_ERROR(( "cff_decoder_parse_charstrings:" 2564 " invalid global subr index\n" )); 2565 goto Syntax_Error; 2566 } 2567 2568 if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) 2569 { 2570 FT_ERROR(( "cff_decoder_parse_charstrings:" 2571 " too many nested subrs\n" )); 2572 goto Syntax_Error; 2573 } 2574 2575 zone->cursor = ip; /* save current instruction pointer */ 2576 2577 zone++; 2578 zone->base = decoder->globals[idx]; 2579 zone->limit = decoder->globals[idx + 1]; 2580 zone->cursor = zone->base; 2581 2582 if ( !zone->base || zone->limit == zone->base ) 2583 { 2584 FT_ERROR(( "cff_decoder_parse_charstrings:" 2585 " invoking empty subrs\n" )); 2586 goto Syntax_Error; 2587 } 2588 2589 decoder->zone = zone; 2590 ip = zone->base; 2591 limit = zone->limit; 2592 } 2593 break; 2594 2595 case cff_op_return: 2596 FT_TRACE4(( " return (leaving level %d)\n", 2597 decoder->zone - decoder->zones )); 2598 2599 if ( decoder->zone <= decoder->zones ) 2600 { 2601 FT_ERROR(( "cff_decoder_parse_charstrings:" 2602 " unexpected return\n" )); 2603 goto Syntax_Error; 2604 } 2605 2606 decoder->zone--; 2607 zone = decoder->zone; 2608 ip = zone->cursor; 2609 limit = zone->limit; 2610 break; 2611 2612 default: 2613 FT_ERROR(( "Unimplemented opcode: %d", ip[-1] )); 2614 2615 if ( ip[-1] == 12 ) 2616 FT_ERROR(( " %d", ip[0] )); 2617 FT_ERROR(( "\n" )); 2618 2619 return FT_THROW( Unimplemented_Feature ); 2620 } 2621 2622 decoder->top = args; 2623 2624 if ( decoder->top - stack >= CFF_MAX_OPERANDS ) 2625 goto Stack_Overflow; 2626 2627 } /* general operator processing */ 2628 2629 } /* while ip < limit */ 2630 2631 FT_TRACE4(( "..end..\n\n" )); 2632 2633 Fail: 2634 return error; 2635 2636 MM_Error: 2637 FT_TRACE4(( "cff_decoder_parse_charstrings:" 2638 " invalid opcode found in top DICT charstring\n")); 2639 return FT_THROW( Invalid_File_Format ); 2640 2641 Syntax_Error: 2642 FT_TRACE4(( "cff_decoder_parse_charstrings: syntax error\n" )); 2643 return FT_THROW( Invalid_File_Format ); 2644 2645 Stack_Underflow: 2646 FT_TRACE4(( "cff_decoder_parse_charstrings: stack underflow\n" )); 2647 return FT_THROW( Too_Few_Arguments ); 2648 2649 Stack_Overflow: 2650 FT_TRACE4(( "cff_decoder_parse_charstrings: stack overflow\n" )); 2651 return FT_THROW( Stack_Overflow ); 2652 } 2653 2654 #endif /* CFF_CONFIG_OPTION_OLD_ENGINE */ 2655 2656 2657 /*************************************************************************/ 2658 /*************************************************************************/ 2659 /*************************************************************************/ 2660 /********** *********/ 2661 /********** *********/ 2662 /********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/ 2663 /********** *********/ 2664 /********** The following code is in charge of computing *********/ 2665 /********** the maximum advance width of the font. It *********/ 2666 /********** quickly processes each glyph charstring to *********/ 2667 /********** extract the value from either a `sbw' or `seac' *********/ 2668 /********** operator. *********/ 2669 /********** *********/ 2670 /*************************************************************************/ 2671 /*************************************************************************/ 2672 /*************************************************************************/ 2673 2674 2675 #if 0 /* unused until we support pure CFF fonts */ 2676 2677 2678 FT_LOCAL_DEF( FT_Error ) 2679 cff_compute_max_advance( TT_Face face, 2680 FT_Int* max_advance ) 2681 { 2682 FT_Error error = FT_Err_Ok; 2683 CFF_Decoder decoder; 2684 FT_Int glyph_index; 2685 CFF_Font cff = (CFF_Font)face->other; 2686 2687 2688 *max_advance = 0; 2689 2690 /* Initialize load decoder */ 2691 cff_decoder_init( &decoder, face, 0, 0, 0, 0 ); 2692 2693 decoder.builder.metrics_only = 1; 2694 decoder.builder.load_points = 0; 2695 2696 /* For each glyph, parse the glyph charstring and extract */ 2697 /* the advance width. */ 2698 for ( glyph_index = 0; glyph_index < face->root.num_glyphs; 2699 glyph_index++ ) 2700 { 2701 FT_Byte* charstring; 2702 FT_ULong charstring_len; 2703 2704 2705 /* now get load the unscaled outline */ 2706 error = cff_get_glyph_data( face, glyph_index, 2707 &charstring, &charstring_len ); 2708 if ( !error ) 2709 { 2710 error = cff_decoder_prepare( &decoder, size, glyph_index ); 2711 if ( !error ) 2712 error = cff_decoder_parse_charstrings( &decoder, 2713 charstring, 2714 charstring_len, 2715 0 ); 2716 2717 cff_free_glyph_data( face, &charstring, &charstring_len ); 2718 } 2719 2720 /* ignore the error if one has occurred -- skip to next glyph */ 2721 error = FT_Err_Ok; 2722 } 2723 2724 *max_advance = decoder.builder.advance.x; 2725 2726 return FT_Err_Ok; 2727 } 2728 2729 2730 #endif /* 0 */ 2731 2732 2733 FT_LOCAL_DEF( FT_Error ) 2734 cff_slot_load( CFF_GlyphSlot glyph, 2735 CFF_Size size, 2736 FT_UInt glyph_index, 2737 FT_Int32 load_flags ) 2738 { 2739 FT_Error error; 2740 CFF_Decoder decoder; 2741 TT_Face face = (TT_Face)glyph->root.face; 2742 FT_Bool hinting, scaled, force_scaling; 2743 CFF_Font cff = (CFF_Font)face->extra.data; 2744 2745 FT_Matrix font_matrix; 2746 FT_Vector font_offset; 2747 2748 2749 force_scaling = FALSE; 2750 2751 /* in a CID-keyed font, consider `glyph_index' as a CID and map */ 2752 /* it immediately to the real glyph_index -- if it isn't a */ 2753 /* subsetted font, glyph_indices and CIDs are identical, though */ 2754 if ( cff->top_font.font_dict.cid_registry != 0xFFFFU && 2755 cff->charset.cids ) 2756 { 2757 /* don't handle CID 0 (.notdef) which is directly mapped to GID 0 */ 2758 if ( glyph_index != 0 ) 2759 { 2760 glyph_index = cff_charset_cid_to_gindex( &cff->charset, 2761 glyph_index ); 2762 if ( glyph_index == 0 ) 2763 return FT_THROW( Invalid_Argument ); 2764 } 2765 } 2766 else if ( glyph_index >= cff->num_glyphs ) 2767 return FT_THROW( Invalid_Argument ); 2768 2769 if ( load_flags & FT_LOAD_NO_RECURSE ) 2770 load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING; 2771 2772 glyph->x_scale = 0x10000L; 2773 glyph->y_scale = 0x10000L; 2774 if ( size ) 2775 { 2776 glyph->x_scale = size->root.metrics.x_scale; 2777 glyph->y_scale = size->root.metrics.y_scale; 2778 } 2779 2780 #ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS 2781 2782 /* try to load embedded bitmap if any */ 2783 /* */ 2784 /* XXX: The convention should be emphasized in */ 2785 /* the documents because it can be confusing. */ 2786 if ( size ) 2787 { 2788 CFF_Face cff_face = (CFF_Face)size->root.face; 2789 SFNT_Service sfnt = (SFNT_Service)cff_face->sfnt; 2790 FT_Stream stream = cff_face->root.stream; 2791 2792 2793 if ( size->strike_index != 0xFFFFFFFFUL && 2794 sfnt->load_eblc && 2795 ( load_flags & FT_LOAD_NO_BITMAP ) == 0 ) 2796 { 2797 TT_SBit_MetricsRec metrics; 2798 2799 2800 error = sfnt->load_sbit_image( face, 2801 size->strike_index, 2802 glyph_index, 2803 (FT_UInt)load_flags, 2804 stream, 2805 &glyph->root.bitmap, 2806 &metrics ); 2807 2808 if ( !error ) 2809 { 2810 FT_Bool has_vertical_info; 2811 FT_UShort advance; 2812 FT_Short dummy; 2813 2814 2815 glyph->root.outline.n_points = 0; 2816 glyph->root.outline.n_contours = 0; 2817 2818 glyph->root.metrics.width = (FT_Pos)metrics.width << 6; 2819 glyph->root.metrics.height = (FT_Pos)metrics.height << 6; 2820 2821 glyph->root.metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6; 2822 glyph->root.metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6; 2823 glyph->root.metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6; 2824 2825 glyph->root.metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6; 2826 glyph->root.metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6; 2827 glyph->root.metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6; 2828 2829 glyph->root.format = FT_GLYPH_FORMAT_BITMAP; 2830 2831 if ( load_flags & FT_LOAD_VERTICAL_LAYOUT ) 2832 { 2833 glyph->root.bitmap_left = metrics.vertBearingX; 2834 glyph->root.bitmap_top = metrics.vertBearingY; 2835 } 2836 else 2837 { 2838 glyph->root.bitmap_left = metrics.horiBearingX; 2839 glyph->root.bitmap_top = metrics.horiBearingY; 2840 } 2841 2842 /* compute linear advance widths */ 2843 2844 (void)( (SFNT_Service)face->sfnt )->get_metrics( face, 0, 2845 glyph_index, 2846 &dummy, 2847 &advance ); 2848 glyph->root.linearHoriAdvance = advance; 2849 2850 has_vertical_info = FT_BOOL( 2851 face->vertical_info && 2852 face->vertical.number_Of_VMetrics > 0 ); 2853 2854 /* get the vertical metrics from the vmtx table if we have one */ 2855 if ( has_vertical_info ) 2856 { 2857 (void)( (SFNT_Service)face->sfnt )->get_metrics( face, 1, 2858 glyph_index, 2859 &dummy, 2860 &advance ); 2861 glyph->root.linearVertAdvance = advance; 2862 } 2863 else 2864 { 2865 /* make up vertical ones */ 2866 if ( face->os2.version != 0xFFFFU ) 2867 glyph->root.linearVertAdvance = (FT_Pos) 2868 ( face->os2.sTypoAscender - face->os2.sTypoDescender ); 2869 else 2870 glyph->root.linearVertAdvance = (FT_Pos) 2871 ( face->horizontal.Ascender - face->horizontal.Descender ); 2872 } 2873 2874 return error; 2875 } 2876 } 2877 } 2878 2879 #endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */ 2880 2881 /* return immediately if we only want the embedded bitmaps */ 2882 if ( load_flags & FT_LOAD_SBITS_ONLY ) 2883 return FT_THROW( Invalid_Argument ); 2884 2885 /* if we have a CID subfont, use its matrix (which has already */ 2886 /* been multiplied with the root matrix) */ 2887 2888 /* this scaling is only relevant if the PS hinter isn't active */ 2889 if ( cff->num_subfonts ) 2890 { 2891 FT_Long top_upm, sub_upm; 2892 FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, 2893 glyph_index ); 2894 2895 2896 if ( fd_index >= cff->num_subfonts ) 2897 fd_index = (FT_Byte)( cff->num_subfonts - 1 ); 2898 2899 top_upm = (FT_Long)cff->top_font.font_dict.units_per_em; 2900 sub_upm = (FT_Long)cff->subfonts[fd_index]->font_dict.units_per_em; 2901 2902 2903 font_matrix = cff->subfonts[fd_index]->font_dict.font_matrix; 2904 font_offset = cff->subfonts[fd_index]->font_dict.font_offset; 2905 2906 if ( top_upm != sub_upm ) 2907 { 2908 glyph->x_scale = FT_MulDiv( glyph->x_scale, top_upm, sub_upm ); 2909 glyph->y_scale = FT_MulDiv( glyph->y_scale, top_upm, sub_upm ); 2910 2911 force_scaling = TRUE; 2912 } 2913 } 2914 else 2915 { 2916 font_matrix = cff->top_font.font_dict.font_matrix; 2917 font_offset = cff->top_font.font_dict.font_offset; 2918 } 2919 2920 glyph->root.outline.n_points = 0; 2921 glyph->root.outline.n_contours = 0; 2922 2923 /* top-level code ensures that FT_LOAD_NO_HINTING is set */ 2924 /* if FT_LOAD_NO_SCALE is active */ 2925 hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_HINTING ) == 0 ); 2926 scaled = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 ); 2927 2928 glyph->hint = hinting; 2929 glyph->scaled = scaled; 2930 glyph->root.format = FT_GLYPH_FORMAT_OUTLINE; /* by default */ 2931 2932 { 2933 #ifdef CFF_CONFIG_OPTION_OLD_ENGINE 2934 CFF_Driver driver = (CFF_Driver)FT_FACE_DRIVER( face ); 2935 #endif 2936 2937 2938 FT_Byte* charstring; 2939 FT_ULong charstring_len; 2940 2941 2942 cff_decoder_init( &decoder, face, size, glyph, hinting, 2943 FT_LOAD_TARGET_MODE( load_flags ) ); 2944 2945 /* this is for pure CFFs */ 2946 if ( load_flags & FT_LOAD_ADVANCE_ONLY ) 2947 decoder.width_only = TRUE; 2948 2949 decoder.builder.no_recurse = 2950 (FT_Bool)( load_flags & FT_LOAD_NO_RECURSE ); 2951 2952 /* now load the unscaled outline */ 2953 error = cff_get_glyph_data( face, glyph_index, 2954 &charstring, &charstring_len ); 2955 if ( error ) 2956 goto Glyph_Build_Finished; 2957 2958 error = cff_decoder_prepare( &decoder, size, glyph_index ); 2959 if ( error ) 2960 goto Glyph_Build_Finished; 2961 2962 #ifdef CFF_CONFIG_OPTION_OLD_ENGINE 2963 /* choose which CFF renderer to use */ 2964 if ( driver->hinting_engine == FT_CFF_HINTING_FREETYPE ) 2965 error = cff_decoder_parse_charstrings( &decoder, 2966 charstring, 2967 charstring_len, 2968 0 ); 2969 else 2970 #endif 2971 { 2972 error = cf2_decoder_parse_charstrings( &decoder, 2973 charstring, 2974 charstring_len ); 2975 2976 /* Adobe's engine uses 16.16 numbers everywhere; */ 2977 /* as a consequence, glyphs larger than 2000ppem get rejected */ 2978 if ( FT_ERR_EQ( error, Glyph_Too_Big ) ) 2979 { 2980 /* this time, we retry unhinted and scale up the glyph later on */ 2981 /* (the engine uses and sets the hardcoded value 0x10000 / 64 = */ 2982 /* 0x400 for both `x_scale' and `y_scale' in this case) */ 2983 hinting = FALSE; 2984 force_scaling = TRUE; 2985 glyph->hint = hinting; 2986 2987 error = cf2_decoder_parse_charstrings( &decoder, 2988 charstring, 2989 charstring_len ); 2990 } 2991 } 2992 2993 cff_free_glyph_data( face, &charstring, charstring_len ); 2994 2995 if ( error ) 2996 goto Glyph_Build_Finished; 2997 2998 #ifdef FT_CONFIG_OPTION_INCREMENTAL 2999 /* Control data and length may not be available for incremental */ 3000 /* fonts. */ 3001 if ( face->root.internal->incremental_interface ) 3002 { 3003 glyph->root.control_data = NULL; 3004 glyph->root.control_len = 0; 3005 } 3006 else 3007 #endif /* FT_CONFIG_OPTION_INCREMENTAL */ 3008 3009 /* We set control_data and control_len if charstrings is loaded. */ 3010 /* See how charstring loads at cff_index_access_element() in */ 3011 /* cffload.c. */ 3012 { 3013 CFF_Index csindex = &cff->charstrings_index; 3014 3015 3016 if ( csindex->offsets ) 3017 { 3018 glyph->root.control_data = csindex->bytes + 3019 csindex->offsets[glyph_index] - 1; 3020 glyph->root.control_len = (FT_Long)charstring_len; 3021 } 3022 } 3023 3024 Glyph_Build_Finished: 3025 /* save new glyph tables, if no error */ 3026 if ( !error ) 3027 cff_builder_done( &decoder.builder ); 3028 /* XXX: anything to do for broken glyph entry? */ 3029 } 3030 3031 #ifdef FT_CONFIG_OPTION_INCREMENTAL 3032 3033 /* Incremental fonts can optionally override the metrics. */ 3034 if ( !error && 3035 face->root.internal->incremental_interface && 3036 face->root.internal->incremental_interface->funcs->get_glyph_metrics ) 3037 { 3038 FT_Incremental_MetricsRec metrics; 3039 3040 3041 metrics.bearing_x = decoder.builder.left_bearing.x; 3042 metrics.bearing_y = 0; 3043 metrics.advance = decoder.builder.advance.x; 3044 metrics.advance_v = decoder.builder.advance.y; 3045 3046 error = face->root.internal->incremental_interface->funcs->get_glyph_metrics( 3047 face->root.internal->incremental_interface->object, 3048 glyph_index, FALSE, &metrics ); 3049 3050 decoder.builder.left_bearing.x = metrics.bearing_x; 3051 decoder.builder.advance.x = metrics.advance; 3052 decoder.builder.advance.y = metrics.advance_v; 3053 } 3054 3055 #endif /* FT_CONFIG_OPTION_INCREMENTAL */ 3056 3057 if ( !error ) 3058 { 3059 /* Now, set the metrics -- this is rather simple, as */ 3060 /* the left side bearing is the xMin, and the top side */ 3061 /* bearing the yMax. */ 3062 3063 /* For composite glyphs, return only left side bearing and */ 3064 /* advance width. */ 3065 if ( load_flags & FT_LOAD_NO_RECURSE ) 3066 { 3067 FT_Slot_Internal internal = glyph->root.internal; 3068 3069 3070 glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x; 3071 glyph->root.metrics.horiAdvance = decoder.glyph_width; 3072 internal->glyph_matrix = font_matrix; 3073 internal->glyph_delta = font_offset; 3074 internal->glyph_transformed = 1; 3075 } 3076 else 3077 { 3078 FT_BBox cbox; 3079 FT_Glyph_Metrics* metrics = &glyph->root.metrics; 3080 FT_Bool has_vertical_info; 3081 3082 3083 if ( face->horizontal.number_Of_HMetrics ) 3084 { 3085 FT_Short horiBearingX = 0; 3086 FT_UShort horiAdvance = 0; 3087 3088 3089 ( (SFNT_Service)face->sfnt )->get_metrics( face, 0, 3090 glyph_index, 3091 &horiBearingX, 3092 &horiAdvance ); 3093 metrics->horiAdvance = horiAdvance; 3094 metrics->horiBearingX = horiBearingX; 3095 glyph->root.linearHoriAdvance = horiAdvance; 3096 } 3097 else 3098 { 3099 /* copy the _unscaled_ advance width */ 3100 metrics->horiAdvance = decoder.glyph_width; 3101 glyph->root.linearHoriAdvance = decoder.glyph_width; 3102 } 3103 3104 glyph->root.internal->glyph_transformed = 0; 3105 3106 has_vertical_info = FT_BOOL( face->vertical_info && 3107 face->vertical.number_Of_VMetrics > 0 ); 3108 3109 /* get the vertical metrics from the vmtx table if we have one */ 3110 if ( has_vertical_info ) 3111 { 3112 FT_Short vertBearingY = 0; 3113 FT_UShort vertAdvance = 0; 3114 3115 3116 ( (SFNT_Service)face->sfnt )->get_metrics( face, 1, 3117 glyph_index, 3118 &vertBearingY, 3119 &vertAdvance ); 3120 metrics->vertBearingY = vertBearingY; 3121 metrics->vertAdvance = vertAdvance; 3122 } 3123 else 3124 { 3125 /* make up vertical ones */ 3126 if ( face->os2.version != 0xFFFFU ) 3127 metrics->vertAdvance = (FT_Pos)( face->os2.sTypoAscender - 3128 face->os2.sTypoDescender ); 3129 else 3130 metrics->vertAdvance = (FT_Pos)( face->horizontal.Ascender - 3131 face->horizontal.Descender ); 3132 } 3133 3134 glyph->root.linearVertAdvance = metrics->vertAdvance; 3135 3136 glyph->root.format = FT_GLYPH_FORMAT_OUTLINE; 3137 3138 glyph->root.outline.flags = 0; 3139 if ( size && size->root.metrics.y_ppem < 24 ) 3140 glyph->root.outline.flags |= FT_OUTLINE_HIGH_PRECISION; 3141 3142 glyph->root.outline.flags |= FT_OUTLINE_REVERSE_FILL; 3143 3144 /* apply the font matrix, if any */ 3145 if ( font_matrix.xx != 0x10000L || font_matrix.yy != 0x10000L || 3146 font_matrix.xy != 0 || font_matrix.yx != 0 ) 3147 { 3148 FT_Outline_Transform( &glyph->root.outline, &font_matrix ); 3149 3150 metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, 3151 font_matrix.xx ); 3152 metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, 3153 font_matrix.yy ); 3154 } 3155 3156 if ( font_offset.x || font_offset.y ) 3157 { 3158 FT_Outline_Translate( &glyph->root.outline, 3159 font_offset.x, 3160 font_offset.y ); 3161 3162 metrics->horiAdvance += font_offset.x; 3163 metrics->vertAdvance += font_offset.y; 3164 } 3165 3166 if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 || force_scaling ) 3167 { 3168 /* scale the outline and the metrics */ 3169 FT_Int n; 3170 FT_Outline* cur = &glyph->root.outline; 3171 FT_Vector* vec = cur->points; 3172 FT_Fixed x_scale = glyph->x_scale; 3173 FT_Fixed y_scale = glyph->y_scale; 3174 3175 3176 /* First of all, scale the points */ 3177 if ( !hinting || !decoder.builder.hints_funcs ) 3178 for ( n = cur->n_points; n > 0; n--, vec++ ) 3179 { 3180 vec->x = FT_MulFix( vec->x, x_scale ); 3181 vec->y = FT_MulFix( vec->y, y_scale ); 3182 } 3183 3184 /* Then scale the metrics */ 3185 metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale ); 3186 metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale ); 3187 } 3188 3189 /* compute the other metrics */ 3190 FT_Outline_Get_CBox( &glyph->root.outline, &cbox ); 3191 3192 metrics->width = cbox.xMax - cbox.xMin; 3193 metrics->height = cbox.yMax - cbox.yMin; 3194 3195 metrics->horiBearingX = cbox.xMin; 3196 metrics->horiBearingY = cbox.yMax; 3197 3198 if ( has_vertical_info ) 3199 metrics->vertBearingX = metrics->horiBearingX - 3200 metrics->horiAdvance / 2; 3201 else 3202 { 3203 if ( load_flags & FT_LOAD_VERTICAL_LAYOUT ) 3204 ft_synthesize_vertical_metrics( metrics, 3205 metrics->vertAdvance ); 3206 } 3207 } 3208 } 3209 3210 return error; 3211 } 3212 3213 3214 /* END */ 3215