1 /* 2 * Copyright (C) 2010 The Android Open Source Project 3 * Copyright (C) 2012-2015, The Linux Foundation. All rights reserved. 4 * 5 * Not a Contribution, Apache license notifications and license are 6 * retained for attribution purposes only. 7 * 8 * Licensed under the Apache License, Version 2.0 (the "License"); 9 * you may not use this file except in compliance with the License. 10 * You may obtain a copy of the License at 11 * 12 * http://www.apache.org/licenses/LICENSE-2.0 13 * 14 * Unless required by applicable law or agreed to in writing, software 15 * distributed under the License is distributed on an "AS IS" BASIS, 16 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 17 * See the License for the specific language governing permissions and 18 * limitations under the License. 19 */ 20 21 #define DEBUG 0 22 #include <fcntl.h> 23 #include <linux/msm_mdp.h> 24 #include <video/msm_hdmi_modes.h> 25 #include <linux/fb.h> 26 #include <sys/ioctl.h> 27 #include <cutils/properties.h> 28 #include "hwc_utils.h" 29 #include "hdmi.h" 30 #include "overlayUtils.h" 31 #include "overlay.h" 32 #include "qd_utils.h" 33 34 using namespace android; 35 using namespace qdutils; 36 37 namespace qhwc { 38 #define UNKNOWN_STRING "unknown" 39 #define SPD_NAME_LENGTH 16 40 41 /* The array gEDIDData contains a list of modes currently 42 * supported by HDMI and display, and modes that are not 43 * supported i.e. interlaced modes. 44 45 * In order to add support for a new mode, the mode must be 46 * appended to the end of the array. 47 * 48 * Each new entry must contain the following: 49 * -Mode: a video format defined in msm_hdmi_modes.h 50 * -Width: x resolution for the mode 51 * -Height: y resolution for the mode 52 * -FPS: the frame rate for the mode 53 * -Mode Order: the priority for the new mode that is used when determining 54 * the best mode when the HDMI display is connected. 55 */ 56 EDIDData gEDIDData [] = { 57 EDIDData(HDMI_VFRMT_1440x480i60_4_3, 1440, 480, 60, 1), 58 EDIDData(HDMI_VFRMT_1440x480i60_16_9, 1440, 480, 60, 2), 59 EDIDData(HDMI_VFRMT_1440x576i50_4_3, 1440, 576, 50, 3), 60 EDIDData(HDMI_VFRMT_1440x576i50_16_9, 1440, 576, 50, 4), 61 EDIDData(HDMI_VFRMT_1920x1080i60_16_9, 1920, 1080, 60, 5), 62 EDIDData(HDMI_VFRMT_640x480p60_4_3, 640, 480, 60, 6), 63 EDIDData(HDMI_VFRMT_720x480p60_4_3, 720, 480, 60, 7), 64 EDIDData(HDMI_VFRMT_720x480p60_16_9, 720, 480, 60, 8), 65 EDIDData(HDMI_VFRMT_720x576p50_4_3, 720, 576, 50, 9), 66 EDIDData(HDMI_VFRMT_720x576p50_16_9, 720, 576, 50, 10), 67 EDIDData(HDMI_VFRMT_800x600p60_4_3, 800, 600, 60, 11), 68 EDIDData(HDMI_VFRMT_848x480p60_16_9, 848, 480, 60, 12), 69 EDIDData(HDMI_VFRMT_1024x768p60_4_3, 1024, 768, 60, 13), 70 EDIDData(HDMI_VFRMT_1280x1024p60_5_4, 1280, 1024, 60, 14), 71 EDIDData(HDMI_VFRMT_1280x720p50_16_9, 1280, 720, 50, 15), 72 EDIDData(HDMI_VFRMT_1280x720p60_16_9, 1280, 720, 60, 16), 73 EDIDData(HDMI_VFRMT_1280x800p60_16_10, 1280, 800, 60, 17), 74 EDIDData(HDMI_VFRMT_1280x960p60_4_3, 1280, 960, 60, 18), 75 EDIDData(HDMI_VFRMT_1360x768p60_16_9, 1360, 768, 60, 19), 76 EDIDData(HDMI_VFRMT_1366x768p60_16_10, 1366, 768, 60, 20), 77 EDIDData(HDMI_VFRMT_1440x900p60_16_10, 1440, 900, 60, 21), 78 EDIDData(HDMI_VFRMT_1400x1050p60_4_3, 1400, 1050, 60, 22), 79 EDIDData(HDMI_VFRMT_1680x1050p60_16_10, 1680, 1050, 60, 23), 80 EDIDData(HDMI_VFRMT_1600x1200p60_4_3, 1600, 1200, 60, 24), 81 EDIDData(HDMI_VFRMT_1920x1080p24_16_9, 1920, 1080, 24, 25), 82 EDIDData(HDMI_VFRMT_1920x1080p25_16_9, 1920, 1080, 25, 26), 83 EDIDData(HDMI_VFRMT_1920x1080p30_16_9, 1920, 1080, 30, 27), 84 EDIDData(HDMI_VFRMT_1920x1080p50_16_9, 1920, 1080, 50, 28), 85 EDIDData(HDMI_VFRMT_1920x1080p60_16_9, 1920, 1080, 60, 29), 86 EDIDData(HDMI_VFRMT_1920x1200p60_16_10, 1920, 1200, 60, 30), 87 EDIDData(HDMI_VFRMT_2560x1600p60_16_9, 2560, 1600, 60, 31), 88 EDIDData(HDMI_VFRMT_3840x2160p24_16_9, 3840, 2160, 24, 32), 89 EDIDData(HDMI_VFRMT_3840x2160p25_16_9, 3840, 2160, 25, 33), 90 EDIDData(HDMI_VFRMT_3840x2160p30_16_9, 3840, 2160, 30, 34), 91 EDIDData(HDMI_VFRMT_4096x2160p24_16_9, 4096, 2160, 24, 35), 92 }; 93 94 // Number of modes in gEDIDData 95 const int gEDIDCount = (sizeof(gEDIDData)/sizeof(gEDIDData)[0]); 96 97 int HDMIDisplay::configure() { 98 if(!openFrameBuffer()) { 99 ALOGE("%s: Failed to open FB: %d", __FUNCTION__, mFbNum); 100 return -1; 101 } 102 readCEUnderscanInfo(); 103 readResolution(); 104 /* Used for changing the resolution 105 * getUserConfig will get the preferred 106 * config index set thru adb shell */ 107 mActiveConfig = getUserConfig(); 108 if (mActiveConfig == -1) { 109 //Get the best mode and set 110 mActiveConfig = getBestConfig(); 111 } 112 113 // Read the system property to determine if downscale feature is enabled. 114 char value[PROPERTY_VALUE_MAX]; 115 mMDPDownscaleEnabled = false; 116 if(property_get("sys.hwc.mdp_downscale_enabled", value, "false") 117 && !strcmp(value, "true")) { 118 mMDPDownscaleEnabled = true; 119 } 120 121 // Set the mode corresponding to the active index 122 mCurrentMode = mEDIDModes[mActiveConfig]; 123 setAttributes(); 124 // set system property 125 property_set("hw.hdmiON", "1"); 126 127 // XXX: A debug property can be used to enable resolution change for 128 // testing purposes: debug.hwc.enable_resolution_change 129 mEnableResolutionChange = false; 130 if(property_get("debug.hwc.enable_resolution_change", value, "false") 131 && !strcmp(value, "true")) { 132 mEnableResolutionChange = true; 133 } 134 return 0; 135 } 136 137 void HDMIDisplay::getAttributes(uint32_t& width, uint32_t& height) { 138 uint32_t fps = 0; 139 getAttrForMode(width, height, fps); 140 } 141 142 int HDMIDisplay::teardown() { 143 closeFrameBuffer(); 144 resetInfo(); 145 // unset system property 146 property_set("hw.hdmiON", "0"); 147 return 0; 148 } 149 150 HDMIDisplay::HDMIDisplay():mFd(-1), 151 mCurrentMode(-1), mModeCount(0), mPrimaryWidth(0), mPrimaryHeight(0), 152 mUnderscanSupported(false), mMDPDownscaleEnabled(false) 153 { 154 memset(&mVInfo, 0, sizeof(mVInfo)); 155 mFbNum = qdutils::getHDMINode(); 156 157 mDisplayId = HWC_DISPLAY_EXTERNAL; 158 // Update the display if HDMI is connected as primary 159 if (isHDMIPrimaryDisplay()) { 160 mDisplayId = HWC_DISPLAY_PRIMARY; 161 } 162 163 // Disable HPD at start if HDMI is external, it will be enabled later 164 // when the display powers on 165 // This helps for framework reboot or adb shell stop/start 166 if (mDisplayId) { 167 writeHPDOption(0); 168 } 169 170 // for HDMI - retreive all the modes supported by the driver 171 if(mFbNum != -1) { 172 supported_video_mode_lut = 173 new msm_hdmi_mode_timing_info[HDMI_VFRMT_MAX]; 174 // Populate the mode table for supported modes 175 MSM_HDMI_MODES_INIT_TIMINGS(supported_video_mode_lut); 176 MSM_HDMI_MODES_SET_SUPP_TIMINGS(supported_video_mode_lut, 177 MSM_HDMI_MODES_ALL); 178 // Update the Source Product Information 179 // Vendor Name 180 setSPDInfo("vendor_name", "ro.product.manufacturer"); 181 // Product Description 182 setSPDInfo("product_description", "ro.product.name"); 183 } 184 185 ALOGD_IF(DEBUG, "%s mDisplayId(%d) mFbNum(%d)", 186 __FUNCTION__, mDisplayId, mFbNum); 187 } 188 /* gets the product manufacturer and product name and writes it 189 * to the sysfs node, so that the driver can get that information 190 * Used to show QCOM 8974 instead of Input 1 for example 191 */ 192 void HDMIDisplay::setSPDInfo(const char* node, const char* property) { 193 char info[PROPERTY_VALUE_MAX]; 194 ssize_t err = -1; 195 int spdFile = openDeviceNode(node, O_RDWR); 196 if (spdFile >= 0) { 197 memset(info, 0, sizeof(info)); 198 property_get(property, info, UNKNOWN_STRING); 199 ALOGD_IF(DEBUG, "In %s: %s = %s", 200 __FUNCTION__, property, info); 201 if (strncmp(info, UNKNOWN_STRING, SPD_NAME_LENGTH)) { 202 err = write(spdFile, info, strlen(info)); 203 if (err <= 0) { 204 ALOGE("%s: file write failed for '%s'" 205 "err no = %d", __FUNCTION__, node, errno); 206 } 207 } else { 208 ALOGD_IF(DEBUG, "%s: property_get failed for SPD %s", 209 __FUNCTION__, node); 210 } 211 close(spdFile); 212 } 213 } 214 215 void HDMIDisplay::setHPD(uint32_t value) { 216 ALOGD_IF(DEBUG,"HPD enabled=%d", value); 217 writeHPDOption(value); 218 } 219 220 void HDMIDisplay::setActionSafeDimension(int w, int h) { 221 ALOGD_IF(DEBUG,"ActionSafe w=%d h=%d", w, h); 222 char actionsafeWidth[PROPERTY_VALUE_MAX]; 223 char actionsafeHeight[PROPERTY_VALUE_MAX]; 224 snprintf(actionsafeWidth, sizeof(actionsafeWidth), "%d", w); 225 property_set("persist.sys.actionsafe.width", actionsafeWidth); 226 snprintf(actionsafeHeight, sizeof(actionsafeHeight), "%d", h); 227 property_set("persist.sys.actionsafe.height", actionsafeHeight); 228 } 229 230 int HDMIDisplay::getModeCount() const { 231 ALOGD_IF(DEBUG,"HPD mModeCount=%d", mModeCount); 232 return mModeCount; 233 } 234 235 void HDMIDisplay::readCEUnderscanInfo() 236 { 237 int hdmiScanInfoFile = -1; 238 ssize_t len = -1; 239 char scanInfo[17]; 240 char *ce_info_str = NULL; 241 char *save_ptr; 242 const char token[] = ", \n"; 243 int ce_info = -1; 244 245 memset(scanInfo, 0, sizeof(scanInfo)); 246 hdmiScanInfoFile = openDeviceNode("scan_info", O_RDONLY); 247 if (hdmiScanInfoFile < 0) { 248 return; 249 } else { 250 len = read(hdmiScanInfoFile, scanInfo, sizeof(scanInfo)-1); 251 ALOGD("%s: Scan Info string: %s length = %zu", 252 __FUNCTION__, scanInfo, len); 253 if (len <= 0) { 254 close(hdmiScanInfoFile); 255 ALOGE("%s: Scan Info file empty", __FUNCTION__); 256 return; 257 } 258 scanInfo[len] = '\0'; /* null terminate the string */ 259 close(hdmiScanInfoFile); 260 } 261 262 /* 263 * The scan_info contains the three fields 264 * PT - preferred video format 265 * IT - video format 266 * CE video format - containing the underscan support information 267 */ 268 269 /* PT */ 270 ce_info_str = strtok_r(scanInfo, token, &save_ptr); 271 if (ce_info_str) { 272 /* IT */ 273 ce_info_str = strtok_r(NULL, token, &save_ptr); 274 if (ce_info_str) { 275 /* CE */ 276 ce_info_str = strtok_r(NULL, token, &save_ptr); 277 if (ce_info_str) 278 ce_info = atoi(ce_info_str); 279 } 280 } 281 282 if (ce_info_str) { 283 // ce_info contains the underscan information 284 if (ce_info == HDMI_SCAN_ALWAYS_UNDERSCANED || 285 ce_info == HDMI_SCAN_BOTH_SUPPORTED) 286 // if TV supported underscan, then driver will always underscan 287 // hence no need to apply action safe rectangle 288 mUnderscanSupported = true; 289 } else { 290 ALOGE("%s: scan_info string error", __FUNCTION__); 291 } 292 293 // Store underscan support info in a system property 294 const char* prop = (mUnderscanSupported) ? "1" : "0"; 295 property_set("hw.underscan_supported", prop); 296 return; 297 } 298 299 HDMIDisplay::~HDMIDisplay() 300 { 301 delete [] supported_video_mode_lut; 302 closeFrameBuffer(); 303 } 304 305 /* 306 * sets the fb_var_screeninfo from the hdmi_mode_timing_info 307 */ 308 void setDisplayTiming(struct fb_var_screeninfo &info, 309 const msm_hdmi_mode_timing_info* mode) 310 { 311 info.reserved[0] = 0; 312 info.reserved[1] = 0; 313 info.reserved[2] = 0; 314 #ifndef FB_METADATA_VIDEO_INFO_CODE_SUPPORT 315 info.reserved[3] = (info.reserved[3] & 0xFFFF) | 316 (mode->video_format << 16); 317 #endif 318 info.xoffset = 0; 319 info.yoffset = 0; 320 info.xres = mode->active_h; 321 info.yres = mode->active_v; 322 323 info.pixclock = (mode->pixel_freq)*1000; 324 info.vmode = mode->interlaced ? 325 FB_VMODE_INTERLACED : FB_VMODE_NONINTERLACED; 326 327 info.right_margin = mode->front_porch_h; 328 info.hsync_len = mode->pulse_width_h; 329 info.left_margin = mode->back_porch_h; 330 info.lower_margin = mode->front_porch_v; 331 info.vsync_len = mode->pulse_width_v; 332 info.upper_margin = mode->back_porch_v; 333 } 334 335 int HDMIDisplay::parseResolution(char* edidStr) 336 { 337 char delim = ','; 338 int count = 0; 339 char *start, *end; 340 // EDIDs are string delimited by ',' 341 // Ex: 16,4,5,3,32,34,1 342 // Parse this string to get mode(int) 343 start = (char*) edidStr; 344 end = &delim; 345 while(*end == delim) { 346 mEDIDModes[count] = (int) strtol(start, &end, 10); 347 start = end+1; 348 count++; 349 } 350 ALOGD_IF(DEBUG, "In %s: count = %d", __FUNCTION__, count); 351 for (int i = 0; i < count; i++) 352 ALOGD_IF(DEBUG, "Mode[%d] = %d", i, mEDIDModes[i]); 353 return count; 354 } 355 356 bool HDMIDisplay::readResolution() 357 { 358 ssize_t len = -1; 359 char edidStr[128] = {'\0'}; 360 361 int hdmiEDIDFile = openDeviceNode("edid_modes", O_RDONLY); 362 if (hdmiEDIDFile < 0) { 363 return false; 364 } else { 365 len = read(hdmiEDIDFile, edidStr, sizeof(edidStr)-1); 366 ALOGD_IF(DEBUG, "%s: EDID string: %s length = %zu", 367 __FUNCTION__, edidStr, len); 368 if (len <= 0) { 369 ALOGE("%s: edid_modes file empty", __FUNCTION__); 370 edidStr[0] = '\0'; 371 } 372 else { 373 while (len > 1 && isspace(edidStr[len-1])) { 374 --len; 375 } 376 edidStr[len] = '\0'; 377 } 378 close(hdmiEDIDFile); 379 } 380 if(len > 0) { 381 // Get EDID modes from the EDID strings 382 mModeCount = parseResolution(edidStr); 383 ALOGD_IF(DEBUG, "%s: mModeCount = %d", __FUNCTION__, 384 mModeCount); 385 } 386 387 return (len > 0); 388 } 389 390 bool HDMIDisplay::openFrameBuffer() 391 { 392 if (mFd == -1) { 393 char strDevPath[MAX_SYSFS_FILE_PATH]; 394 snprintf(strDevPath, MAX_SYSFS_FILE_PATH, "/dev/graphics/fb%d", mFbNum); 395 mFd = open(strDevPath, O_RDWR); 396 if (mFd < 0) 397 ALOGE("%s: %s is not available", __FUNCTION__, strDevPath); 398 } 399 return (mFd > 0); 400 } 401 402 bool HDMIDisplay::closeFrameBuffer() 403 { 404 int ret = 0; 405 if(mFd >= 0) { 406 ret = close(mFd); 407 mFd = -1; 408 } 409 return (ret == 0); 410 } 411 412 // clears the vinfo, edid, best modes 413 void HDMIDisplay::resetInfo() 414 { 415 memset(&mVInfo, 0, sizeof(mVInfo)); 416 memset(mEDIDModes, 0, sizeof(mEDIDModes)); 417 mModeCount = 0; 418 mCurrentMode = -1; 419 mUnderscanSupported = false; 420 mXres = 0; 421 mYres = 0; 422 mVsyncPeriod = 0; 423 mMDPScalingMode = false; 424 // Reset the underscan supported system property 425 const char* prop = "0"; 426 property_set("hw.underscan_supported", prop); 427 } 428 429 int HDMIDisplay::getModeOrder(int mode) 430 { 431 for (int dataIndex = 0; dataIndex < gEDIDCount; dataIndex++) { 432 if (gEDIDData[dataIndex].mMode == mode) { 433 return gEDIDData[dataIndex].mModeOrder; 434 } 435 } 436 ALOGE("%s Mode not found: %d", __FUNCTION__, mode); 437 return -1; 438 } 439 440 /// Returns the index of the user mode set(if any) using adb shell 441 int HDMIDisplay::getUserConfig() { 442 /* Based on the property set the resolution */ 443 char property_value[PROPERTY_VALUE_MAX]; 444 property_get("hw.hdmi.resolution", property_value, "-1"); 445 int mode = atoi(property_value); 446 // We dont support interlaced modes 447 if(isValidMode(mode) && !isInterlacedMode(mode)) { 448 ALOGD_IF(DEBUG, "%s: setting the HDMI mode = %d", __FUNCTION__, mode); 449 return getModeIndex(mode); 450 } 451 return -1; 452 } 453 454 // Get the index of the best mode for the current HD TV 455 int HDMIDisplay::getBestConfig() { 456 int bestOrder = 0; 457 int bestMode = HDMI_VFRMT_640x480p60_4_3; 458 int bestModeIndex = -1; 459 // for all the edid read, get the best mode 460 for(int i = 0; i < mModeCount; i++) { 461 int mode = mEDIDModes[i]; 462 int order = getModeOrder(mode); 463 if (order > bestOrder) { 464 bestOrder = order; 465 bestMode = mode; 466 bestModeIndex = i; 467 } 468 } 469 // If we fail to read from EDID when HDMI is connected, then 470 // mModeCount will be 0 and bestModeIndex will be invalid. 471 // In this case, we populate the mEDIDModes structure with 472 // a default mode at index 0. 473 if (bestModeIndex == -1) { 474 bestModeIndex = 0; 475 mModeCount = 1; 476 mEDIDModes[bestModeIndex] = bestMode; 477 } 478 return bestModeIndex; 479 } 480 481 inline bool HDMIDisplay::isValidMode(int ID) 482 { 483 bool valid = false; 484 for (int i = 0; i < mModeCount; i++) { 485 if(ID == mEDIDModes[i]) { 486 valid = true; 487 break; 488 } 489 } 490 return valid; 491 } 492 493 // returns true if the mode(ID) is interlaced mode format 494 bool HDMIDisplay::isInterlacedMode(int ID) { 495 bool interlaced = false; 496 switch(ID) { 497 case HDMI_VFRMT_1440x480i60_4_3: 498 case HDMI_VFRMT_1440x480i60_16_9: 499 case HDMI_VFRMT_1440x576i50_4_3: 500 case HDMI_VFRMT_1440x576i50_16_9: 501 case HDMI_VFRMT_1920x1080i60_16_9: 502 interlaced = true; 503 break; 504 default: 505 interlaced = false; 506 break; 507 } 508 return interlaced; 509 } 510 511 // Does a put_vscreen info on the HDMI interface which will update 512 // the configuration (resolution, timing info) to match mCurrentMode 513 void HDMIDisplay::activateDisplay() 514 { 515 int ret = 0; 516 ret = ioctl(mFd, FBIOGET_VSCREENINFO, &mVInfo); 517 if(ret < 0) { 518 ALOGD("In %s: FBIOGET_VSCREENINFO failed Err Str = %s", __FUNCTION__, 519 strerror(errno)); 520 } 521 ALOGD_IF(DEBUG, "%s: GET Info<ID=%d %dx%d (%d,%d,%d)," 522 "(%d,%d,%d) %dMHz>", __FUNCTION__, 523 mVInfo.reserved[3], mVInfo.xres, mVInfo.yres, 524 mVInfo.right_margin, mVInfo.hsync_len, mVInfo.left_margin, 525 mVInfo.lower_margin, mVInfo.vsync_len, mVInfo.upper_margin, 526 mVInfo.pixclock/1000/1000); 527 528 const struct msm_hdmi_mode_timing_info *mode = 529 &supported_video_mode_lut[0]; 530 for (unsigned int i = 0; i < HDMI_VFRMT_MAX; ++i) { 531 const struct msm_hdmi_mode_timing_info *cur = 532 &supported_video_mode_lut[i]; 533 if (cur->video_format == (uint32_t)mCurrentMode) { 534 mode = cur; 535 break; 536 } 537 } 538 setDisplayTiming(mVInfo, mode); 539 ALOGD_IF(DEBUG, "%s: SET Info<ID=%d => Info<ID=%d %dx %d" 540 "(%d,%d,%d), (%d,%d,%d) %dMHz>", __FUNCTION__, mCurrentMode, 541 mode->video_format, mVInfo.xres, mVInfo.yres, 542 mVInfo.right_margin, mVInfo.hsync_len, mVInfo.left_margin, 543 mVInfo.lower_margin, mVInfo.vsync_len, mVInfo.upper_margin, 544 mVInfo.pixclock/1000/1000); 545 #ifdef FB_METADATA_VIDEO_INFO_CODE_SUPPORT 546 struct msmfb_metadata metadata; 547 memset(&metadata, 0 , sizeof(metadata)); 548 metadata.op = metadata_op_vic; 549 metadata.data.video_info_code = mode->video_format; 550 if (ioctl(mFd, MSMFB_METADATA_SET, &metadata) == -1) { 551 ALOGD("In %s: MSMFB_METADATA_SET failed Err Str = %s", 552 __FUNCTION__, strerror(errno)); 553 } 554 #endif 555 mVInfo.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_ALL | FB_ACTIVATE_FORCE; 556 ret = ioctl(mFd, FBIOPUT_VSCREENINFO, &mVInfo); 557 if(ret < 0) { 558 ALOGD("In %s: FBIOPUT_VSCREENINFO failed Err Str = %s", 559 __FUNCTION__, strerror(errno)); 560 } 561 } 562 563 bool HDMIDisplay::writeHPDOption(int userOption) const 564 { 565 bool ret = true; 566 if(mFbNum != -1) { 567 int hdmiHPDFile = openDeviceNode("hpd", O_RDWR); 568 if (hdmiHPDFile >= 0) { 569 ssize_t err = -1; 570 ALOGD_IF(DEBUG, "%s: option = %d", 571 __FUNCTION__, userOption); 572 if(userOption) 573 err = write(hdmiHPDFile, "1", 2); 574 else 575 err = write(hdmiHPDFile, "0" , 2); 576 if (err <= 0) { 577 ALOGE("%s: file write failed 'hpd'", __FUNCTION__); 578 ret = false; 579 } 580 close(hdmiHPDFile); 581 } 582 } 583 return ret; 584 } 585 586 587 void HDMIDisplay::setAttributes() { 588 uint32_t fps = 0; 589 // Always set dpyAttr res to mVInfo res 590 getAttrForMode(mXres, mYres, fps); 591 mMDPScalingMode = false; 592 593 if(overlay::Overlay::getInstance()->isUIScalingOnExternalSupported() 594 && mMDPDownscaleEnabled) { 595 // if primary resolution is more than the hdmi resolution 596 // configure dpy attr to primary resolution and set MDP 597 // scaling mode 598 // Restrict this upto 1080p resolution max, if target does not 599 // support source split feature. 600 uint32_t primaryArea = mPrimaryWidth * mPrimaryHeight; 601 if(((primaryArea) > (mXres * mYres)) && 602 (((primaryArea) <= SUPPORTED_DOWNSCALE_AREA) || 603 qdutils::MDPVersion::getInstance().isSrcSplit())) { 604 // tmpW and tmpH will hold the primary dimensions before we 605 // update the aspect ratio if necessary. 606 int tmpW = mPrimaryWidth; 607 int tmpH = mPrimaryHeight; 608 // HDMI is always in landscape, so always assign the higher 609 // dimension to hdmi's xres 610 if(mPrimaryHeight > mPrimaryWidth) { 611 tmpW = mPrimaryHeight; 612 tmpH = mPrimaryWidth; 613 } 614 // The aspect ratios of the external and primary displays 615 // can be different. As a result, directly assigning primary 616 // resolution could lead to an incorrect final image. 617 // We get around this by calculating a new resolution by 618 // keeping aspect ratio intact. 619 hwc_rect r = {0, 0, 0, 0}; 620 qdutils::getAspectRatioPosition(tmpW, tmpH, mXres, mYres, r); 621 uint32_t newExtW = r.right - r.left; 622 uint32_t newExtH = r.bottom - r.top; 623 uint32_t alignedExtW; 624 uint32_t alignedExtH; 625 // On 8994 and below targets MDP supports only 4X downscaling, 626 // Restricting selected external resolution to be exactly 4X 627 // greater resolution than actual external resolution 628 uint32_t maxMDPDownScale = 629 qdutils::MDPVersion::getInstance().getMaxMDPDownscale(); 630 if((mXres * mYres * maxMDPDownScale) < (newExtW * newExtH)) { 631 float upScaleFactor = (float)maxMDPDownScale / 2.0f; 632 newExtW = (int)((float)mXres * upScaleFactor); 633 newExtH = (int)((float)mYres * upScaleFactor); 634 } 635 // Align it down so that the new aligned resolution does not 636 // exceed the maxMDPDownscale factor 637 alignedExtW = overlay::utils::aligndown(newExtW, 4); 638 alignedExtH = overlay::utils::aligndown(newExtH, 4); 639 mXres = alignedExtW; 640 mYres = alignedExtH; 641 // Set External Display MDP Downscale mode indicator 642 mMDPScalingMode = true; 643 } 644 } 645 ALOGD_IF(DEBUG_MDPDOWNSCALE, "Selected external resolution [%d X %d] " 646 "maxMDPDownScale %d mMDPScalingMode %d srcSplitEnabled %d " 647 "MDPDownscale feature %d", 648 mXres, mYres, 649 qdutils::MDPVersion::getInstance().getMaxMDPDownscale(), 650 mMDPScalingMode, qdutils::MDPVersion::getInstance().isSrcSplit(), 651 mMDPDownscaleEnabled); 652 mVsyncPeriod = (int) 1000000000l / fps; 653 ALOGD_IF(DEBUG, "%s xres=%d, yres=%d", __FUNCTION__, mXres, mYres); 654 } 655 656 void HDMIDisplay::getAttrForMode(uint32_t& width, uint32_t& height, 657 uint32_t& fps) { 658 for (int dataIndex = 0; dataIndex < gEDIDCount; dataIndex++) { 659 if (gEDIDData[dataIndex].mMode == mCurrentMode) { 660 width = gEDIDData[dataIndex].mWidth; 661 height = gEDIDData[dataIndex].mHeight; 662 fps = gEDIDData[dataIndex].mFps; 663 return; 664 } 665 } 666 ALOGE("%s Unable to get attributes for %d", __FUNCTION__, mCurrentMode); 667 } 668 669 /* returns the fd related to the node specified*/ 670 int HDMIDisplay::openDeviceNode(const char* node, int fileMode) const { 671 char sysFsFilePath[MAX_SYSFS_FILE_PATH]; 672 memset(sysFsFilePath, 0, sizeof(sysFsFilePath)); 673 snprintf(sysFsFilePath , sizeof(sysFsFilePath), 674 "/sys/devices/virtual/graphics/fb%d/%s", 675 mFbNum, node); 676 677 int fd = open(sysFsFilePath, fileMode, 0); 678 679 if (fd < 0) { 680 ALOGE("%s: file '%s' not found : ret = %d err str: %s", 681 __FUNCTION__, sysFsFilePath, fd, strerror(errno)); 682 } 683 return fd; 684 } 685 686 bool HDMIDisplay::isHDMIPrimaryDisplay() { 687 return (mFbNum == HWC_DISPLAY_PRIMARY); 688 } 689 690 int HDMIDisplay::getConnectedState() { 691 int ret = -1; 692 int mFbNum = qdutils::getHDMINode(); 693 int connectedNode = openDeviceNode("connected", O_RDONLY); 694 if(connectedNode >= 0) { 695 char opStr[4]; 696 ssize_t bytesRead = read(connectedNode, opStr, sizeof(opStr) - 1); 697 if(bytesRead > 0) { 698 opStr[bytesRead] = '\0'; 699 ret = atoi(opStr); 700 ALOGD_IF(DEBUG, "%s: Read %d from connected", __FUNCTION__, ret); 701 } else if(bytesRead == 0) { 702 ALOGE("%s: HDMI connected node empty", __FUNCTION__); 703 } else { 704 ALOGE("%s: Read from HDMI connected node failed with error %s", 705 __FUNCTION__, strerror(errno)); 706 } 707 close(connectedNode); 708 } else { 709 ALOGD("%s: /sys/class/graphics/fb%d/connected could not be opened : %s", 710 __FUNCTION__, mFbNum, strerror(errno)); 711 } 712 return ret; 713 } 714 715 void HDMIDisplay::setPrimaryAttributes(uint32_t primaryWidth, 716 uint32_t primaryHeight) { 717 mPrimaryHeight = primaryHeight; 718 mPrimaryWidth = primaryWidth; 719 } 720 721 int HDMIDisplay::setActiveConfig(int newConfig) { 722 if(newConfig < 0 || newConfig > mModeCount) { 723 ALOGE("%s Invalid configuration %d", __FUNCTION__, newConfig); 724 return -EINVAL; 725 } 726 727 // XXX: Currently, we only support a change in frame rate. 728 // We need to validate the new config before proceeding. 729 if (!isValidConfigChange(newConfig)) { 730 ALOGE("%s Invalid configuration %d", __FUNCTION__, newConfig); 731 return -EINVAL; 732 } 733 734 mCurrentMode = mEDIDModes[newConfig]; 735 mActiveConfig = newConfig; 736 activateDisplay(); 737 ALOGD("%s config(%d) mode(%d)", __FUNCTION__, mActiveConfig, mCurrentMode); 738 return 0; 739 } 740 741 // returns false if the xres or yres of the new config do 742 // not match the current config 743 bool HDMIDisplay::isValidConfigChange(int newConfig) { 744 int newMode = mEDIDModes[newConfig]; 745 uint32_t width = 0, height = 0, refresh = 0; 746 getAttrForConfig(newConfig, width, height, refresh); 747 return ((mXres == width) && (mYres == height)) || mEnableResolutionChange; 748 } 749 750 int HDMIDisplay::getModeIndex(int mode) { 751 int modeIndex = -1; 752 for(int i = 0; i < mModeCount; i++) { 753 if(mode == mEDIDModes[i]) { 754 modeIndex = i; 755 break; 756 } 757 } 758 return modeIndex; 759 } 760 761 int HDMIDisplay::getAttrForConfig(int config, uint32_t& xres, 762 uint32_t& yres, uint32_t& refresh) const { 763 if(config < 0 || config > mModeCount) { 764 ALOGE("%s Invalid configuration %d", __FUNCTION__, config); 765 return -EINVAL; 766 } 767 int mode = mEDIDModes[config]; 768 uint32_t fps = 0; 769 // Retrieve the mode attributes from gEDIDData 770 for (int dataIndex = 0; dataIndex < gEDIDCount; dataIndex++) { 771 if (gEDIDData[dataIndex].mMode == mode) { 772 xres = gEDIDData[dataIndex].mWidth; 773 yres = gEDIDData[dataIndex].mHeight; 774 fps = gEDIDData[dataIndex].mFps; 775 } 776 } 777 refresh = (uint32_t) 1000000000l / fps; 778 ALOGD_IF(DEBUG, "%s xres(%d) yres(%d) fps(%d) refresh(%d)", __FUNCTION__, 779 xres, yres, fps, refresh); 780 return 0; 781 } 782 783 int HDMIDisplay::getDisplayConfigs(uint32_t* configs, 784 size_t* numConfigs) const { 785 if (*numConfigs <= 0) { 786 ALOGE("%s Invalid number of configs (%d)", __FUNCTION__, *numConfigs); 787 return -EINVAL; 788 } 789 *numConfigs = mModeCount; 790 for (int configIndex = 0; configIndex < mModeCount; configIndex++) { 791 configs[configIndex] = (uint32_t)configIndex; 792 } 793 return 0; 794 } 795 796 }; 797