1 #!/bin/sh 2 # 3 # Copyright (C) 2012 The Android Open Source Project 4 # 5 # Licensed under the Apache License, Version 2.0 (the "License"); 6 # you may not use this file except in compliance with the License. 7 # You may obtain a copy of the License at 8 # 9 # http://www.apache.org/licenses/LICENSE-2.0 10 # 11 # Unless required by applicable law or agreed to in writing, software 12 # distributed under the License is distributed on an "AS IS" BASIS, 13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 # See the License for the specific language governing permissions and 15 # limitations under the License. 16 # 17 # Rebuild the mingw64 cross-toolchain from scratch 18 # 19 # See --help for usage example. 20 21 PROGNAME=$(basename $0) 22 PROGDIR=$(dirname $0) 23 PROGDIR=$(cd $PROGDIR && pwd) 24 25 HELP= 26 VERBOSE=1 27 28 # This will be reset later. 29 LOG_FILE=/dev/null 30 31 panic () 32 { 33 1>&2 echo "Error: $@" 34 exit 1 35 } 36 37 fail_panic () 38 { 39 if [ $? != 0 ]; then 40 panic "$@" 41 fi 42 } 43 44 var_value () 45 { 46 eval echo \"$1\" 47 } 48 49 var_append () 50 { 51 local _varname=$1 52 local _varval=$(var_value $_varname) 53 shift 54 if [ -z "$_varval" ]; then 55 eval $_varname=\"$*\" 56 else 57 eval $_varname=\$$_varname\" $*\" 58 fi 59 } 60 61 run () 62 { 63 if [ "$VERBOSE" -gt 0 ]; then 64 echo "COMMAND: >>>> $@" >> $LOG_FILE 65 fi 66 if [ "$VERBOSE" -gt 1 ]; then 67 echo "COMMAND: >>>> $@" 68 fi 69 if [ "$VERBOSE" -gt 1 ]; then 70 "$@" 71 else 72 "$@" > /dev/null 2>&1 73 fi 74 } 75 76 log () 77 { 78 if [ "$LOG_FILE" ]; then 79 echo "$@" >> $LOG_FILE 80 fi 81 if [ "$VERBOSE" -gt 0 ]; then 82 echo "$@" 83 fi 84 } 85 86 # For now, only tested on Linux 87 OS=$(uname -s) 88 EXEEXT= # executable extension 89 case $OS in 90 Linux) OS=linux;; 91 Darwin) OS=darwin;; 92 CYGWIN*|*_NT-*) OS=windows; 93 if [ "$OSTYPE" = cygwgin ]; then 94 OS=cygwin 95 fi 96 EXEEXT=.exe 97 ;; 98 esac 99 100 ARCH=$(uname -m) 101 case $ARCH in 102 i?86) ARCH=i686;; 103 amd64) ARCH=x86_64;; 104 esac 105 106 case $OS in 107 linux) 108 NUM_CORES=$(grep -c -e '^processor' /proc/cpuinfo) 109 ;; 110 darwin|freebsd) 111 NUM_CORES=`sysctl -n hw.ncpu` 112 ;; 113 windows|cygwin) 114 NUM_CORES=$NUMBER_OF_PROCESSORS 115 ;; 116 *) # let's play safe here 117 NUM_CORES=1 118 ;; 119 esac 120 121 # Warn our users, because the script probably fails on anything but Linux 122 # at that point (e.g. there are strange libtool build breakages on darwin). 123 if [ "$OS" != "linux" ]; then 124 echo "WARNING: WARNING: WARNING: THIS SCRIPT PROBABLY ONLY WORKS ON LINUX!!" 125 fi 126 127 # GMP moving home? 128 # GMP_VERSION=5.1.0 129 # GMP_URL=ftp://ftp.gmplib.org/pub/gmp-$GMP_VERSION/ 130 # ..but the old one is still there: 131 GMP_VERSION=5.0.5 132 GMP_URL=http://ftp.gnu.org/gnu/gmp/ 133 134 MPFR_VERSION=3.1.1 135 MPC_VERSION=1.0.1 136 BINUTILS_VERSION=2.24 137 GCC_VERSION=4.8.3 138 139 # Need at least revision 5166 140 # For reference, I've built a working NDK with 5445 141 # (latest as of Sun Feb 3 2013 is 5578) 142 MINGW_W64_VERSION=svn@5861 143 144 JOBS=$(( $NUM_CORES * 2 )) 145 146 147 HOST_BINPREFIX= 148 TARGET_ARCH=x86_64 149 TARGET_MULTILIBS=true # not empty to enable multilib 150 PACKAGE_DIR= 151 FORCE_ALL= 152 FORCE_BUILD= 153 CLEANUP= 154 155 TEMP_DIR=$TMPDIR/build-mingw64-toolchain-$USER 156 157 for opt; do 158 optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'` 159 case $opt in 160 -h|-?|--help) HELP=true;; 161 --verbose) VERBOSE=$(( $VERBOSE + 1 ));; 162 --quiet) VERBOSE=$(( $VERBOSE - 1 ));; 163 --binprefix=*) HOST_BINPREFIX=$optarg;; 164 -j*|--jobs=*) JOBS=$optarg;; 165 --target-arch=*) TARGET_ARCH=$optarg;; 166 --no-multilib) TARGET_MULTILIBS="";; 167 --force-build) FORCE_BUILD=true;; 168 --force-all) FORCE_ALL=true;; 169 --work-dir=*) TEMP_DIR=$optarg;; 170 --package-dir=*) PACKAGE_DIR=$optarg;; 171 --cleanup) CLEANUP=true;; 172 --gcc-version=*) GCC_VERSION=$optarg;; 173 --binutils-version=*) BINUTILS_VERSION=$optarg;; 174 --gmp-version=*) GMP_VERSION=$optarg;; 175 --mpfr-version=*) MPFR_VERSION=$optarg;; 176 --mpc-version=*) MPC_VERSION=$optarg;; 177 --mingw-version=*) MINGW_W64_VERSION=$optarg;; 178 -*) panic "Unknown option '$opt', see --help for list of valid ones.";; 179 *) panic "This script doesn't take any parameter, see --help for details.";; 180 esac 181 done 182 183 184 if [ "$HELP" ]; then 185 cat <<EOF 186 Usage: $PROGNAME [options] 187 188 This program is used to rebuild a mingw64 cross-toolchain from scratch. 189 190 It uses your host 'gcc' by default to generate a cross-toolchain named 191 either x86_64-w64-mingw32 or i686-w64-mingw32, depending on your compiler's 192 target bitness. For example: 193 194 /path/to/build-mingw64-toolchain.sh 195 196 All toolchain binaries can generate both Win32 and Win64 executables. 197 The default target is Win64, but you can change this to Win32 by using 198 the '--target-arch=i686' option. Otherwise, use -m32 or -m64 at compile/link 199 time to select a specific target. 200 201 It is possible to use --binprefix=<prefix> to specify an alternative host 202 toolchain prefix, e.g. <prefix>-gcc to compile. For example, to generate 203 64-bit binaries that can run on older Linux distributions, using the Android 204 SDK's compatibility Linux toolchain, one can do the following: 205 206 SDK_TOOLCHAIN=<some-dir> 207 PREBUILTS=https://android.googlesource.com/platform/prebuilts 208 git clone \$PREBUILTS/gcc/linux-x86/host/x86_64-linux-glibc2.11-4.8 \\ 209 \$SDK_TOOLCHAIN 210 PATH=\$SDK_TOOLCHAIN/bin:\$PATH \\ 211 /path/to/build-mingw64-toolchain.sh --binprefix=x86_64-linux 212 213 In the example above, the script will use 'x86_64-linux-gcc' and related 214 tools to build the final binaries. 215 216 It is recommended to use --package-dir=<path> to generate tarballs of the 217 generated toolchains under <path>/, for easier redistribution. 218 219 Valid options: 220 -h|-?|--help Print this message." 221 --verbose Increase verbosity." 222 --quiet Decrease verbosity." 223 --gcc-version=<version> Select gcc version [$GCC_VERSION]." 224 --binutil-version=<version> Select binutils version [$BINUTILS_VERSION]." 225 --gmp-version=<version> Select libgmp version [$GMP_VERSION]." 226 --mpfr-version=<version> Select libmpfr version [$MPFR_VERSION]." 227 --mpc-version=<version> Select libmpc version [$MPC_VERSION]." 228 --mingw-version=<version> Select mingw-w64 version [$MINGW_W64_VERSION]." 229 --jobs=<num> Run <num> build tasks in parallel [$JOBS]." 230 -j<num> Same as --jobs=<num>." 231 --binprefix=<prefix> Specify bin prefix for host toolchain." 232 --no-multilib Disable multilib toolchain build." 233 --target-arch=<arch> Select default target architecture [$TARGET_ARCH]." 234 --force-all Redo everything from scratch." 235 --force-build Force a rebuild (keep sources)." 236 --cleanup Remove all temp files after build." 237 --work-dir=<path> Specify work/build directory [$TEMP_DIR]." 238 --package-dir=<path> Package toolchain to directory." 239 240 EOF 241 exit 0 242 fi 243 244 if [ "$CLEANUP" ]; then 245 if [ -z "$PACKAGE_DIR" ]; then 246 panic "You should only use --cleanup with --package-dir=<path> !". 247 fi 248 fi 249 250 BUILD_TAG64=x86_64-linux-gnu 251 BUILD_TAG32=i686-linux-gnu 252 253 # We don't want debug executables 254 BUILD_CFLAGS="-O2 -fomit-frame-pointer -s" 255 BUILD_LDFLAGS="" 256 257 # On Darwin, we want to use the 10.4 / 10.5 / 10.6 SDKs to generate binaries 258 # that work on "old" platform releases. 259 if [ "$OS" = darwin ]; then 260 # Use the check for the availability of a compatibility SDK in Darwin 261 # this can be used to generate binaries compatible with either Tiger or 262 # Leopard. 263 # 264 # $1: SDK root path 265 # $2: MacOS X minimum version (e.g. 10.4) 266 check_darwin_sdk () 267 { 268 if [ -d "$1" ] ; then 269 var_append BUILD_CFLAGS "-isysroot $1 -mmacosx-version-min=$2 -DMAXOSX_DEPLOYEMENT_TARGET=$2" 270 var_append BUILD_LDFLAGS "-Wl,-syslibroot,$sdk -mmacosx-version-min=$2" 271 return 0 # success 272 fi 273 return 1 274 } 275 276 if check_darwin_sdk /Developer/SDKs/MacOSX10.4.sdku 10.4; then 277 log "Generating Tiger-compatible binaries!" 278 elif check_darwin_sdk /Developer/SDKs/MacOSX10.5.sdk 10.5; then 279 log "Generating Leopard-compatible binaries!" 280 elif check_darwin_sdk /Developer/SDKs/MacOSX10.6.sdk 10.6; then 281 log "Generating Snow Leopard-compatible binaries!" 282 else 283 osx_version=`sw_vers -productVersion` 284 log "Generating $osx_version-compatible binaries!" 285 fi 286 fi 287 288 mkdir -p $TEMP_DIR 289 if [ "$FORCE_ALL" ]; then 290 log "Cleaning up work directory..." 291 rm -rf $TEMP_DIR/* 292 fi 293 294 LOG_FILE=$TEMP_DIR/build.log 295 rm -f $LOG_FILE && touch $LOG_FILE 296 if [ "$VERBOSE" -eq 1 ]; then 297 echo "To follow build, use in another terminal: tail -F $LOG_FILE" 298 fi 299 300 case $TARGET_ARCH in 301 x86_64) TARGET_BITS=64;; 302 i686) TARGET_BITS=32;; 303 *) panic "Invalid --target parameter. Valid values are: x86_64 i686";; 304 esac 305 TARGET_TAG=$TARGET_ARCH-w64-mingw32 306 log "Target arch: $TARGET_TAG" 307 log "Target bits: $TARGET_BITS" 308 309 # Determine bitness of host architecture 310 PROBE_CC=${CC:-gcc} 311 if [ -n "$HOST_BINPREFIX" ]; then 312 # If $HOST_BINPREFIX is a directory but not ends with '/', append '/'. 313 # Otherwise, append '-'. 314 if [ -d "$HOST_BINPREFIX" ] ; then 315 if [ -n "${HOST_BINPREFIX##*/}" ] ; then 316 HOST_BINPREFIX="${HOST_BINPREFIX}/" 317 fi 318 else 319 HOST_BINPREFIX="${HOST_BINPREFIX}-" 320 fi 321 PROBE_CC=${HOST_BINPREFIX}gcc 322 fi 323 echo "Using GCC: $PROBE_CC" 324 echo "int main() { return 0; }" > $TEMP_DIR/test-host-cc.c 325 $PROBE_CC -c $TEMP_DIR/test-host-cc.c -o $TEMP_DIR/test-host-cc.o > /dev/null 326 fail_panic "Host compiler doesn't work: $PROBE_CC" 327 328 file $TEMP_DIR/test-host-cc.o | grep -q -e "x86[_-]64" 329 if [ $? != 0 ]; then 330 log "Host compiler generates 32-bit code: $PROBE_CC" 331 HOST_ARCH=i686 332 HOST_BITS=32 333 else 334 log "Host compiler generates 64-bit code: $PROBE_CC" 335 HOST_ARCH=x86_64 336 HOST_BITS=64 337 fi 338 339 case $OS in 340 linux) HOST_TAG=$HOST_ARCH-linux-gnu;; 341 darwin) HOST_TAG=$HOST_ARCH-apple-darwinx11;; 342 cygwin) HOST_TAG=$HOST_ARCH-pc-cygwin;; 343 *) panic "Unsupported host operating system!" 344 esac 345 log "Host arch: $HOST_TAG" 346 347 download_package () 348 { 349 # Assume the packages are already downloaded under $ARCHIVE_DIR 350 local PKG_URL=$1 351 local PKG_NAME=$(basename $PKG_URL) 352 353 case $PKG_NAME in 354 *.tar.bz2) 355 PKG_BASENAME=${PKG_NAME%%.tar.bz2} 356 ;; 357 *.tar.gz) 358 PKG_BASENAME=${PKG_NAME%%.tar.gz} 359 ;; 360 *) 361 panic "Unknown archive type: $PKG_NAME" 362 esac 363 364 if [ ! -f "$ARCHIVE_DIR/$PKG_NAME" ]; then 365 log "Downloading $PKG_URL..." 366 (cd $ARCHIVE_DIR && run curl -L -o "$PKG_NAME" "$PKG_URL") 367 fail_panic "Can't download '$PKG_URL'" 368 fi 369 370 MD5SUM=$(md5sum $ARCHIVE_DIR/$PKG_NAME | cut -d" " -f1) 371 echo "$MD5SUM $PKG_URL" >> $INSTALL_DIR/README 372 373 if [ ! -d "$SRC_DIR/$PKG_BASENAME" ]; then 374 log "Uncompressing $PKG_URL into $SRC_DIR" 375 case $PKG_NAME in 376 *.tar.bz2) 377 run tar xjf $ARCHIVE_DIR/$PKG_NAME -C $SRC_DIR 378 ;; 379 *.tar.gz) 380 run tar xzf $ARCHIVE_DIR/$PKG_NAME -C $SRC_DIR 381 ;; 382 *) 383 panic "Unknown archive type: $PKG_NAME" 384 ;; 385 esac 386 fail_panic "Can't uncompress $ARCHIVE_DIR/$PKG_NAME" 387 fi 388 } 389 390 # Download and unpack source packages from official sites 391 ARCHIVE_DIR=$TEMP_DIR/archive 392 SRC_DIR=$TEMP_DIR/src 393 STAMP_DIR=$TEMP_DIR/timestamps 394 395 mkdir -p $ARCHIVE_DIR 396 mkdir -p $SRC_DIR 397 mkdir -p $STAMP_DIR 398 399 INSTALL_DIR=$TEMP_DIR/install-$HOST_TAG/$TARGET_TAG 400 BUILD_DIR=$TEMP_DIR/build-$HOST_TAG 401 402 if [ "$FORCE_BUILD" ]; then 403 rm -f $STAMP_DIR/* 404 rm -rf $INSTALL_DIR 405 rm -rf $BUILD_DIR 406 fi 407 408 # Make temp install directory 409 mkdir -p $INSTALL_DIR 410 mkdir -p $BUILD_DIR 411 412 # Copy this script 413 cp $0 $INSTALL_DIR/ && 414 echo "This file has been automatically generated on $(date) with the following command:" > $INSTALL_DIR/README && 415 echo "$PROGNAME $@" >> $INSTALL_DIR/README && 416 echo "" >> $INSTALL_DIR/README && 417 echo "The MD5 hashes for the original sources packages are:" >> $INSTALL_DIR/README 418 fail_panic "Could not copy script to installation directory." 419 420 download_package ${GMP_URL}gmp-${GMP_VERSION}.tar.bz2 421 download_package http://ftp.gnu.org/gnu/mpfr/mpfr-$MPFR_VERSION.tar.bz2 422 download_package http://www.multiprecision.org/mpc/download/mpc-$MPC_VERSION.tar.gz 423 download_package http://ftp.gnu.org/gnu/binutils/binutils-$BINUTILS_VERSION.tar.bz2 424 download_package http://ftp.gnu.org/gnu/gcc/gcc-$GCC_VERSION/gcc-$GCC_VERSION.tar.bz2 425 426 PREFIX_FOR_TARGET=$INSTALL_DIR/$TARGET_TAG 427 WITH_WIDL=$INSTALL_DIR/bin 428 MINGW_W64_REVISION= 429 MINGW_W64_VERSION_NO_REV=$(echo $MINGW_W64_VERSION | awk 'BEGIN { FS="@" }; { print $1 }') 430 if [ "$MINGW_W64_VERSION_NO_REV" = "svn" ]; then 431 MINGW_W64_REVISION=$(echo $MINGW_W64_VERSION | awk 'BEGIN { FS="@" }; { print $2 }') 432 if [ ! -z "$MINGW_W64_REVISION" ] ; then 433 if [ $MINGW_W64_REVISION -lt 5186 ] ; then 434 PREFIX_FOR_TARGET=$INSTALL_DIR 435 fi 436 if [ $MINGW_W64_REVISION -lt 5252 ] ; then 437 WITH_WIDL=mingw-w64-widl 438 elif [ $MINGW_W64_REVISION -lt 5258 ] ; then 439 WITH_WIDL=$TARGET_TAG-widl 440 fi 441 MINGW_W64_REVISION2=-r$MINGW_W64_REVISION 442 MINGW_W64_REVISION=@${MINGW_W64_REVISION} 443 fi 444 MINGW_W64_SRC=$SRC_DIR/mingw-w64-svn$MINGW_W64_REVISION2 445 MINGW_W64_VERSION=svn 446 fi 447 448 if [ -z "$MINGW_W64_REVISION" ] ; then 449 # Released versions of MinGW-w64 don't provide easily accessible information 450 # about the svn revision which this script needs to know. 451 fail_panic "Building MinGW-w64 toolchain requires specifying an svn version" 452 fi 453 454 if [ ! -d $MINGW_W64_SRC ]; then 455 MINGW64_SVN_URL=https://svn.code.sf.net/p/mingw-w64/code/trunk$MINGW_W64_REVISION 456 echo "Checking out $MINGW64_SVN_URL $MINGW_W64_SRC" 457 run svn co $MINGW64_SVN_URL $MINGW_W64_SRC 458 PATCHES_DIR="$PROGDIR/toolchain-patches-host/mingw-w64" 459 if [ -d "$PATCHES_DIR" ] ; then 460 PATCHES=$(find "$PATCHES_DIR" -name "*.patch" | sort) 461 for PATCH in $PATCHES; do 462 echo "Patching mingw-w64-$MINGW_W64_REVISION with $PATCH" 463 (cd $MINGW_W64_SRC && run patch -p0 < $PATCH) 464 done 465 fi 466 fi 467 468 # Let's generate the licenses/ directory 469 LICENSES_DIR=$INSTALL_DIR/licenses/ 470 mkdir -p $LICENSES_DIR 471 if [ ! -f $STAMP_DIR/licenses ]; then 472 LICENSE_FILES=$(cd $SRC_DIR && find . -name "COPYING*") 473 # Copy all license files to $LICENSES_DIR 474 (tar cf - -C $SRC_DIR $LICENSE_FILES) | (tar xf - -C $LICENSES_DIR) 475 touch $STAMP_DIR/licenses 476 fi 477 478 setup_build_env () 479 { 480 local BINPREFIX=$1 481 482 if [ "$BINPREFIX" ]; then 483 CC=${BINPREFIX}gcc 484 CXX=${BINPREFIX}g++ 485 LD=${BINPREFIX}ld 486 AS=${BINPREFIX}as 487 AR=${BINPREFIX}ar 488 RANLIB=${BINPREFIX}ranlib 489 STRIP=${BINPREFIX}strip 490 export CC CXX LD AS AR RANLIB STRIP 491 elif [ "$OS" = darwin ]; then 492 # Needed on OS X otherwise libtool will try to use gcc and $BUILD_CFLAGS 493 LD=ld 494 fi 495 496 export CFLAGS="$BUILD_CFLAGS" 497 export CXXFLAGS="$BUILD_CFLAGS" 498 export LDFLAGS="$BUILD_LDFLAGS" 499 } 500 501 setup_install_env () 502 { 503 export PATH=$INSTALL_DIR/bin:$PATH 504 } 505 506 build_host_package () 507 { 508 local PKGNAME=$1 509 shift 510 511 if [ ! -f $STAMP_DIR/$PKGNAME ]; then 512 ( 513 mkdir -p $BUILD_DIR/$PKGNAME && 514 cd $BUILD_DIR/$PKGNAME && 515 setup_build_env $HOST_BINPREFIX && 516 log "$PKGNAME: Configuring" && 517 run $SRC_DIR/$PKGNAME/configure "$@" 518 fail_panic "Can't configure $PKGNAME !!" 519 520 log "$PKGNAME: Building" && 521 run make -j$JOBS 522 fail_panic "Can't build $PKGNAME !!" 523 524 log "$PKGNAME: Installing" && 525 run make install 526 fail_panic "Can't install $PKGNAME" 527 ) || exit 1 528 touch $STAMP_DIR/$PKGNAME 529 fi 530 } 531 532 export ABI=$HOST_BITS 533 BASE_HOST_OPTIONS="--prefix=$INSTALL_DIR --disable-shared" 534 build_host_package gmp-$GMP_VERSION $BASE_HOST_OPTIONS 535 var_append BASE_HOST_OPTIONS "--with-gmp=$INSTALL_DIR" 536 537 build_host_package mpfr-$MPFR_VERSION $BASE_HOST_OPTIONS 538 var_append BASE_HOST_OPTIONS "--with-mpfr=$INSTALL_DIR" 539 540 build_host_package mpc-$MPC_VERSION $BASE_HOST_OPTIONS 541 var_append BASE_HOST_OPTIONS "--with-mpc=$INSTALL_DIR" 542 543 BINUTILS_CONFIGURE_OPTIONS=$BASE_HOST_OPTIONS 544 var_append BINUTILS_CONFIGURE_OPTIONS "--target=$TARGET_TAG --disable-nls" 545 if [ "$TARGET_MULTILIBS" ]; then 546 var_append BINUTILS_CONFIGURE_OPTIONS "--enable-targets=x86_64-w64-mingw32,i686-w64-mingw32" 547 fi 548 549 var_append BINUTILS_CONFIGURE_OPTIONS "--with-sysroot=$INSTALL_DIR" 550 551 build_host_package binutils-$BINUTILS_VERSION $BINUTILS_CONFIGURE_OPTIONS 552 553 build_mingw_tools () 554 { 555 local PKGNAME=$1 556 echo "$STAMP_DIR/$PKGNAME" 557 if [ ! -f "$STAMP_DIR/$PKGNAME" ]; then 558 ( 559 mkdir -p $BUILD_DIR/$PKGNAME && 560 cd $BUILD_DIR/$PKGNAME && 561 log "$PKGNAME: Configuring" && 562 run $MINGW_W64_SRC/mingw-w64-tools/widl/configure --prefix=$INSTALL_DIR --target=$TARGET_TAG 563 fail_panic "Can't configure mingw-64-tools" 564 log "$PKGNAME: Installing" && 565 run make install -j$JOBS 566 ) || exit 1 567 touch $STAMP_DIR/$PKGNAME 568 fi 569 } 570 571 # Install the right mingw64 headers into the sysroot 572 build_mingw_headers () 573 { 574 local PKGNAME=$1 575 if [ ! -f "$STAMP_DIR/$PKGNAME" ]; then 576 ( 577 # If --with-widl only identifies the program name (svn version dependent)... 578 if [ $(basename "$WITH_WIDL") = "$WITH_WIDL" ] ; then 579 # ...then need to add the right path too. 580 export PATH=$PATH:$INSTALL_DIR/bin 581 fi 582 fail_panic "Can't find widl" 583 mkdir -p $BUILD_DIR/$PKGNAME && 584 cd $BUILD_DIR/$PKGNAME && 585 log "$PKGNAME: Configuring" && 586 run $MINGW_W64_SRC/mingw-w64-headers/configure --prefix=$PREFIX_FOR_TARGET --host=$TARGET_TAG \ 587 --build=$HOST_TAG --with-widl=$WITH_WIDL --enable-sdk=all 588 fail_panic "Can't configure mingw-64-headers" 589 590 run make 591 log "$PKGNAME: Installing" && 592 run make install -j$JOBS && 593 run cd $INSTALL_DIR && 594 run ln -s $TARGET_TAG mingw && 595 run cd $INSTALL_DIR/mingw && 596 run ln -s lib lib$TARGET_BITS 597 fail_panic "Can't install mingw-64-headers" 598 ) || exit 1 599 touch $STAMP_DIR/$PKGNAME 600 fi 601 } 602 603 # Slightly different from build_host_package because we need to call 604 # 'make all-gcc' and 'make install-gcc' as a special case. 605 # 606 build_core_gcc () 607 { 608 local PKGNAME=$1 609 shift 610 611 if [ ! -f "$STAMP_DIR/core-$PKGNAME" ]; then 612 ( 613 mkdir -p $BUILD_DIR/$PKGNAME && 614 cd $BUILD_DIR/$PKGNAME && 615 setup_build_env $HOST_BINPREFIX && 616 log "core-$PKGNAME: Configuring" && 617 run $SRC_DIR/$PKGNAME/configure "$@" 618 fail_panic "Can't configure $PKGNAME !!" 619 620 log "core-$PKGNAME: Building" && 621 run make -j$JOBS all-gcc 622 fail_panic "Can't build $PKGNAME !!" 623 624 log "core-$PKGNAME: Installing" && 625 run make -j$JOBS install-gcc 626 fail_panic "Can't install $PKGNAME" 627 ) || exit 1 628 touch $STAMP_DIR/core-$PKGNAME 629 fi 630 } 631 632 633 # Build and install the C runtime files needed by the toolchain 634 build_mingw_crt () 635 { 636 local PKGNAME=$1 637 shift 638 639 if [ ! -f $STAMP_DIR/$PKGNAME ]; then 640 ( 641 mkdir -p $BUILD_DIR/$PKGNAME && 642 cd $BUILD_DIR/$PKGNAME && 643 export PATH=$INSTALL_DIR/bin:$PATH 644 log "$PKGNAME: Configuring" && 645 run $MINGW_W64_SRC/mingw-w64-crt/configure "$@" 646 fail_panic "Can't configure $PKGNAME !!" 647 648 log "$PKGNAME: Building" && 649 run make -j$JOBS 650 fail_panic "Can't build $PKGNAME !!" 651 652 log "$PKGNAME: Installing" && 653 run make -j$JOBS install 654 fail_panic "Can't install $PKGNAME" 655 ) || exit 1 656 touch $STAMP_DIR/$PKGNAME 657 fi 658 } 659 660 661 build_libgcc () 662 { 663 local PKGNAME=$1 664 shift 665 666 if [ ! -f "$STAMP_DIR/libgcc-$PKGNAME" ]; then 667 ( 668 # No configure step here! We're resuming work that was started 669 # in build_core_gcc. 670 cd $BUILD_DIR/$PKGNAME && 671 setup_build_env $HOST_BINPREFIX && 672 log "libgcc-$PKGNAME: Building" && 673 run make -j$JOBS 674 fail_panic "Can't build libgcc-$PKGNAME !!" 675 676 log "libgcc-$PKGNAME: Installing" && 677 run make -j$JOBS install 678 fail_panic "Can't install libgcc-$PKGNAME" 679 ) || exit 1 680 681 touch "$STAMP_DIR/libgcc-$PKGNAME" 682 fi 683 } 684 685 GCC_CONFIGURE_OPTIONS=$BASE_HOST_OPTIONS 686 var_append GCC_CONFIGURE_OPTIONS "--target=$TARGET_TAG" 687 if [ "$TARGET_MULTILIBS" ]; then 688 var_append GCC_CONFIGURE_OPTIONS "--enable-targets=all" 689 fi 690 var_append GCC_CONFIGURE_OPTIONS "--enable-languages=c,c++" 691 var_append GCC_CONFIGURE_OPTIONS "--with-sysroot=$INSTALL_DIR" 692 693 # A bug in MinGW-w64 forces us to build and use widl. 694 build_mingw_tools mingw-w64-tools 695 build_mingw_headers mingw-w64-headers 696 697 build_core_gcc gcc-$GCC_VERSION $GCC_CONFIGURE_OPTIONS 698 699 CRT_CONFIGURE_OPTIONS="--host=$TARGET_TAG --with-sysroot=$INSTALL_DIR --prefix=$PREFIX_FOR_TARGET" 700 if [ "$TARGET_MULTILIBS" ]; then 701 var_append CRT_CONFIGURE_OPTIONS "--enable-lib32" 702 fi 703 704 build_mingw_crt mingw-w64-crt $CRT_CONFIGURE_OPTIONS 705 706 build_libgcc gcc-$GCC_VERSION 707 708 if [ "$PACKAGE_DIR" ]; then 709 mkdir -p $PACKAGE_DIR 710 fail_panic "Could not create packaging directory: $PACKAGE_DIR" 711 PACKAGE_NAME=$PACKAGE_DIR/$TARGET_TAG-$OS-$HOST_ARCH.tar.bz2 712 log "Packaging $TARGET_TAG toolchain to $PACKAGE_NAME" 713 run tar cjf $PACKAGE_NAME -C $(dirname $INSTALL_DIR) $TARGET_TAG/ 714 fail_panic "Could not package $TARGET_TAG toolchain!" 715 log "Done. See $PACKAGE_DIR:" 716 ls -l $PACKAGE_NAME 717 else 718 log "Done. See: $INSTALL_DIR" 719 fi 720 721 if [ "$CLEANUP" ]; then 722 log "Cleaning up..." 723 rm -rf $TEMP_DIR/* 724 fi 725 726 exit 0 727