1 /* 2 * Any part of this program may be used in documents licensed under 3 * the GNU Free Documentation License, Version 1.1 or any later version 4 * published by the Free Software Foundation. 5 */ 6 7 #ifndef _PARPORT_H_ 8 #define _PARPORT_H_ 9 10 /* Start off with user-visible constants */ 11 12 /* Maximum of 16 ports per machine */ 13 #define PARPORT_MAX 16 14 15 /* Magic numbers */ 16 #define PARPORT_IRQ_NONE -1 17 #define PARPORT_DMA_NONE -1 18 #define PARPORT_IRQ_AUTO -2 19 #define PARPORT_DMA_AUTO -2 20 #define PARPORT_DMA_NOFIFO -3 21 #define PARPORT_DISABLE -2 22 #define PARPORT_IRQ_PROBEONLY -3 23 #define PARPORT_IOHI_AUTO -1 24 25 #define PARPORT_CONTROL_STROBE 0x1 26 #define PARPORT_CONTROL_AUTOFD 0x2 27 #define PARPORT_CONTROL_INIT 0x4 28 #define PARPORT_CONTROL_SELECT 0x8 29 30 #define PARPORT_STATUS_ERROR 0x8 31 #define PARPORT_STATUS_SELECT 0x10 32 #define PARPORT_STATUS_PAPEROUT 0x20 33 #define PARPORT_STATUS_ACK 0x40 34 #define PARPORT_STATUS_BUSY 0x80 35 36 /* Type classes for Plug-and-Play probe. */ 37 typedef enum { 38 PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */ 39 PARPORT_CLASS_PRINTER, 40 PARPORT_CLASS_MODEM, 41 PARPORT_CLASS_NET, 42 PARPORT_CLASS_HDC, /* Hard disk controller */ 43 PARPORT_CLASS_PCMCIA, 44 PARPORT_CLASS_MEDIA, /* Multimedia device */ 45 PARPORT_CLASS_FDC, /* Floppy disk controller */ 46 PARPORT_CLASS_PORTS, 47 PARPORT_CLASS_SCANNER, 48 PARPORT_CLASS_DIGCAM, 49 PARPORT_CLASS_OTHER, /* Anything else */ 50 PARPORT_CLASS_UNSPEC, /* No CLS field in ID */ 51 PARPORT_CLASS_SCSIADAPTER 52 } parport_device_class; 53 54 /* The "modes" entry in parport is a bit field representing the 55 capabilities of the hardware. */ 56 #define PARPORT_MODE_PCSPP (1<<0) /* IBM PC registers available. */ 57 #define PARPORT_MODE_TRISTATE (1<<1) /* Can tristate. */ 58 #define PARPORT_MODE_EPP (1<<2) /* Hardware EPP. */ 59 #define PARPORT_MODE_ECP (1<<3) /* Hardware ECP. */ 60 #define PARPORT_MODE_COMPAT (1<<4) /* Hardware 'printer protocol'. */ 61 #define PARPORT_MODE_DMA (1<<5) /* Hardware can DMA. */ 62 #define PARPORT_MODE_SAFEININT (1<<6) /* SPP registers accessible in IRQ. */ 63 64 /* IEEE1284 modes: 65 Nibble mode, byte mode, ECP, ECPRLE and EPP are their own 66 'extensibility request' values. Others are special. 67 'Real' ECP modes must have the IEEE1284_MODE_ECP bit set. */ 68 #define IEEE1284_MODE_NIBBLE 0 69 #define IEEE1284_MODE_BYTE (1<<0) 70 #define IEEE1284_MODE_COMPAT (1<<8) 71 #define IEEE1284_MODE_BECP (1<<9) /* Bounded ECP mode */ 72 #define IEEE1284_MODE_ECP (1<<4) 73 #define IEEE1284_MODE_ECPRLE (IEEE1284_MODE_ECP | (1<<5)) 74 #define IEEE1284_MODE_ECPSWE (1<<10) /* Software-emulated */ 75 #define IEEE1284_MODE_EPP (1<<6) 76 #define IEEE1284_MODE_EPPSL (1<<11) /* EPP 1.7 */ 77 #define IEEE1284_MODE_EPPSWE (1<<12) /* Software-emulated */ 78 #define IEEE1284_DEVICEID (1<<2) /* This is a flag */ 79 #define IEEE1284_EXT_LINK (1<<14) /* This flag causes the 80 * extensibility link to 81 * be requested, using 82 * bits 0-6. */ 83 84 /* For the benefit of parport_read/write, you can use these with 85 * parport_negotiate to use address operations. They have no effect 86 * other than to make parport_read/write use address transfers. */ 87 #define IEEE1284_ADDR (1<<13) /* This is a flag */ 88 #define IEEE1284_DATA 0 /* So is this */ 89 90 /* Flags for block transfer operations. */ 91 #define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */ 92 #define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */ 93 94 /* The rest is for the kernel only */ 95 #endif /* _PARPORT_H_ */ 96