1 /** @file 2 3 Copyright (c) 2005 - 2015, Intel Corporation. All rights reserved.<BR> 4 This program and the accompanying materials 5 are licensed and made available under the terms and conditions of the BSD License 6 which accompanies this distribution. The full text of the license may be found at 7 http://opensource.org/licenses/bsd-license.php 8 9 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 10 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 11 12 **/ 13 14 #include "Ip4Impl.h" 15 16 EFI_IPSEC2_PROTOCOL *mIpSec = NULL; 17 18 /** 19 Gets the current operational settings for this instance of the EFI IPv4 Protocol driver. 20 21 The GetModeData() function returns the current operational mode data for this 22 driver instance. The data fields in EFI_IP4_MODE_DATA are read only. This 23 function is used optionally to retrieve the operational mode data of underlying 24 networks or drivers. 25 26 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 27 @param[out] Ip4ModeData Pointer to the EFI IPv4 Protocol mode data structure. 28 @param[out] MnpConfigData Pointer to the managed network configuration data structure. 29 @param[out] SnpModeData Pointer to the simple network mode data structure. 30 31 @retval EFI_SUCCESS The operation completed successfully. 32 @retval EFI_INVALID_PARAMETER This is NULL. 33 @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated. 34 35 **/ 36 EFI_STATUS 37 EFIAPI 38 EfiIp4GetModeData ( 39 IN CONST EFI_IP4_PROTOCOL *This, 40 OUT EFI_IP4_MODE_DATA *Ip4ModeData OPTIONAL, 41 OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, 42 OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL 43 ); 44 45 /** 46 Assigns an IPv4 address and subnet mask to this EFI IPv4 Protocol driver instance. 47 48 The Configure() function is used to set, change, or reset the operational 49 parameters and filter settings for this EFI IPv4 Protocol instance. Until these 50 parameters have been set, no network traffic can be sent or received by this 51 instance. Once the parameters have been reset (by calling this function with 52 IpConfigData set to NULL), no more traffic can be sent or received until these 53 parameters have been set again. Each EFI IPv4 Protocol instance can be started 54 and stopped independently of each other by enabling or disabling their receive 55 filter settings with the Configure() function. 56 57 When IpConfigData.UseDefaultAddress is set to FALSE, the new station address will 58 be appended as an alias address into the addresses list in the EFI IPv4 Protocol 59 driver. While set to TRUE, Configure() will trigger the EFI_IP4_CONFIG_PROTOCOL 60 to retrieve the default IPv4 address if it is not available yet. Clients could 61 frequently call GetModeData() to check the status to ensure that the default IPv4 62 address is ready. 63 64 If operational parameters are reset or changed, any pending transmit and receive 65 requests will be cancelled. Their completion token status will be set to EFI_ABORTED 66 and their events will be signaled. 67 68 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 69 @param[in] IpConfigData Pointer to the EFI IPv4 Protocol configuration data structure. 70 71 @retval EFI_SUCCESS The driver instance was successfully opened. 72 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 73 RARP, etc.) is not finished yet. 74 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 75 @retval EFI_UNSUPPORTED One or more of the following conditions is TRUE: 76 A configuration protocol (DHCP, BOOTP, RARP, etc.) could 77 not be located when clients choose to use the default IPv4 78 address. This EFI IPv4 Protocol implementation does not 79 support this requested filter or timeout setting. 80 @retval EFI_OUT_OF_RESOURCES The EFI IPv4 Protocol driver instance data could not be allocated. 81 @retval EFI_ALREADY_STARTED The interface is already open and must be stopped before the 82 IPv4 address or subnet mask can be changed. The interface must 83 also be stopped when switching to/from raw packet mode. 84 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI IPv4 85 Protocol driver instance is not opened. 86 87 **/ 88 EFI_STATUS 89 EFIAPI 90 EfiIp4Configure ( 91 IN EFI_IP4_PROTOCOL *This, 92 IN EFI_IP4_CONFIG_DATA *IpConfigData OPTIONAL 93 ); 94 95 /** 96 Joins and leaves multicast groups. 97 98 The Groups() function is used to join and leave multicast group sessions. Joining 99 a group will enable reception of matching multicast packets. Leaving a group will 100 disable the multicast packet reception. 101 102 If JoinFlag is FALSE and GroupAddress is NULL, all joined groups will be left. 103 104 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 105 @param[in] JoinFlag Set to TRUE to join the multicast group session and FALSE to leave. 106 @param[in] GroupAddress Pointer to the IPv4 multicast address. 107 108 @retval EFI_SUCCESS The operation completed successfully. 109 @retval EFI_INVALID_PARAMETER One or more of the following is TRUE: 110 - This is NULL. 111 - JoinFlag is TRUE and GroupAddress is NULL. 112 - GroupAddress is not NULL and *GroupAddress is 113 not a multicast IPv4 address. 114 @retval EFI_NOT_STARTED This instance has not been started. 115 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 116 RARP, etc.) is not finished yet. 117 @retval EFI_OUT_OF_RESOURCES System resources could not be allocated. 118 @retval EFI_UNSUPPORTED This EFI IPv4 Protocol implementation does not support multicast groups. 119 @retval EFI_ALREADY_STARTED The group address is already in the group table (when 120 JoinFlag is TRUE). 121 @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is FALSE). 122 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 123 124 **/ 125 EFI_STATUS 126 EFIAPI 127 EfiIp4Groups ( 128 IN EFI_IP4_PROTOCOL *This, 129 IN BOOLEAN JoinFlag, 130 IN EFI_IPv4_ADDRESS *GroupAddress OPTIONAL 131 ); 132 133 /** 134 Adds and deletes routing table entries. 135 136 The Routes() function adds a route to or deletes a route from the routing table. 137 138 Routes are determined by comparing the SubnetAddress with the destination IPv4 139 address arithmetically AND-ed with the SubnetMask. The gateway address must be 140 on the same subnet as the configured station address. 141 142 The default route is added with SubnetAddress and SubnetMask both set to 0.0.0.0. 143 The default route matches all destination IPv4 addresses that do not match any 144 other routes. 145 146 A GatewayAddress that is zero is a nonroute. Packets are sent to the destination 147 IP address if it can be found in the ARP cache or on the local subnet. One automatic 148 nonroute entry will be inserted into the routing table for outgoing packets that 149 are addressed to a local subnet (gateway address of 0.0.0.0). 150 151 Each EFI IPv4 Protocol instance has its own independent routing table. Those EFI 152 IPv4 Protocol instances that use the default IPv4 address will also have copies 153 of the routing table that was provided by the EFI_IP4_CONFIG_PROTOCOL, and these 154 copies will be updated whenever the EIF IPv4 Protocol driver reconfigures its 155 instances. As a result, client modification to the routing table will be lost. 156 157 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 158 @param[in] DeleteRoute Set to TRUE to delete this route from the routing table. Set to 159 FALSE to add this route to the routing table. SubnetAddress 160 and SubnetMask are used as the key to each route entry. 161 @param[in] SubnetAddress The address of the subnet that needs to be routed. 162 @param[in] SubnetMask The subnet mask of SubnetAddress. 163 @param[in] GatewayAddress The unicast gateway IPv4 address for this route. 164 165 @retval EFI_SUCCESS The operation completed successfully. 166 @retval EFI_NOT_STARTED The driver instance has not been started. 167 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 168 RARP, etc.) is not finished yet. 169 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 170 - This is NULL. 171 - SubnetAddress is NULL. 172 - SubnetMask is NULL. 173 - GatewayAddress is NULL. 174 - *SubnetAddress is not a valid subnet address. 175 - *SubnetMask is not a valid subnet mask. 176 - *GatewayAddress is not a valid unicast IPv4 address. 177 @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table. 178 @retval EFI_NOT_FOUND This route is not in the routing table (when DeleteRoute is TRUE). 179 @retval EFI_ACCESS_DENIED The route is already defined in the routing table (when 180 DeleteRoute is FALSE). 181 182 **/ 183 EFI_STATUS 184 EFIAPI 185 EfiIp4Routes ( 186 IN EFI_IP4_PROTOCOL *This, 187 IN BOOLEAN DeleteRoute, 188 IN EFI_IPv4_ADDRESS *SubnetAddress, 189 IN EFI_IPv4_ADDRESS *SubnetMask, 190 IN EFI_IPv4_ADDRESS *GatewayAddress 191 ); 192 193 /** 194 Places outgoing data packets into the transmit queue. 195 196 The Transmit() function places a sending request in the transmit queue of this 197 EFI IPv4 Protocol instance. Whenever the packet in the token is sent out or some 198 errors occur, the event in the token will be signaled and the status is updated. 199 200 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 201 @param[in] Token Pointer to the transmit token. 202 203 @retval EFI_SUCCESS The data has been queued for transmission. 204 @retval EFI_NOT_STARTED This instance has not been started. 205 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 206 RARP, etc.) is not finished yet. 207 @retval EFI_INVALID_PARAMETER One or more pameters are invalid. 208 @retval EFI_ACCESS_DENIED The transmit completion token with the same Token.Event 209 was already in the transmit queue. 210 @retval EFI_NOT_READY The completion token could not be queued because the transmit 211 queue is full. 212 @retval EFI_NOT_FOUND Not route is found to destination address. 213 @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data. 214 @retval EFI_BUFFER_TOO_SMALL Token.Packet.TxData.TotalDataLength is too 215 short to transmit. 216 @retval EFI_BAD_BUFFER_SIZE The length of the IPv4 header + option length + total data length is 217 greater than MTU (or greater than the maximum packet size if 218 Token.Packet.TxData.OverrideData. 219 DoNotFragment is TRUE.) 220 221 **/ 222 EFI_STATUS 223 EFIAPI 224 EfiIp4Transmit ( 225 IN EFI_IP4_PROTOCOL *This, 226 IN EFI_IP4_COMPLETION_TOKEN *Token 227 ); 228 229 /** 230 Places a receiving request into the receiving queue. 231 232 The Receive() function places a completion token into the receive packet queue. 233 This function is always asynchronous. 234 235 The Token.Event field in the completion token must be filled in by the caller 236 and cannot be NULL. When the receive operation completes, the EFI IPv4 Protocol 237 driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event 238 is signaled. 239 240 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 241 @param[in] Token Pointer to a token that is associated with the receive data descriptor. 242 243 @retval EFI_SUCCESS The receive completion token was cached. 244 @retval EFI_NOT_STARTED This EFI IPv4 Protocol instance has not been started. 245 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) 246 is not finished yet. 247 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 248 - This is NULL. 249 - Token is NULL. 250 - Token.Event is NULL. 251 @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system 252 resources (usually memory). 253 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 254 The EFI IPv4 Protocol instance has been reset to startup defaults. 255 EFI_ACCESS_DENIED The receive completion token with the same Token.Event was already 256 in the receive queue. 257 @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full. 258 @retval EFI_ICMP_ERROR An ICMP error packet was received. 259 260 **/ 261 EFI_STATUS 262 EFIAPI 263 EfiIp4Receive ( 264 IN EFI_IP4_PROTOCOL *This, 265 IN EFI_IP4_COMPLETION_TOKEN *Token 266 ); 267 268 /** 269 Abort an asynchronous transmit or receive request. 270 271 The Cancel() function is used to abort a pending transmit or receive request. 272 If the token is in the transmit or receive request queues, after calling this 273 function, Token->Status will be set to EFI_ABORTED and then Token->Event will 274 be signaled. If the token is not in one of the queues, which usually means the 275 asynchronous operation has completed, this function will not signal the token 276 and EFI_NOT_FOUND is returned. 277 278 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 279 @param[in] Token Pointer to a token that has been issued by 280 EFI_IP4_PROTOCOL.Transmit() or 281 EFI_IP4_PROTOCOL.Receive(). If NULL, all pending 282 tokens are aborted. Type EFI_IP4_COMPLETION_TOKEN is 283 defined in EFI_IP4_PROTOCOL.Transmit(). 284 285 @retval EFI_SUCCESS The asynchronous I/O request was aborted and 286 Token.->Event was signaled. When Token is NULL, all 287 pending requests were aborted and their events were signaled. 288 @retval EFI_INVALID_PARAMETER This is NULL. 289 @retval EFI_NOT_STARTED This instance has not been started. 290 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 291 RARP, etc.) is not finished yet. 292 @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was 293 not found in the transmit or receive queue. It has either completed 294 or was not issued by Transmit() and Receive(). 295 296 **/ 297 EFI_STATUS 298 EFIAPI 299 EfiIp4Cancel ( 300 IN EFI_IP4_PROTOCOL *This, 301 IN EFI_IP4_COMPLETION_TOKEN *Token OPTIONAL 302 ); 303 304 /** 305 Polls for incoming data packets and processes outgoing data packets. 306 307 The Poll() function polls for incoming data packets and processes outgoing data 308 packets. Network drivers and applications can call the EFI_IP4_PROTOCOL.Poll() 309 function to increase the rate that data packets are moved between the communications 310 device and the transmit and receive queues. 311 312 In some systems the periodic timer event may not poll the underlying communications 313 device fast enough to transmit and/or receive all data packets without missing 314 incoming packets or dropping outgoing packets. Drivers and applications that are 315 experiencing packet loss should try calling the EFI_IP4_PROTOCOL.Poll() function 316 more often. 317 318 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 319 320 @retval EFI_SUCCESS Incoming or outgoing data was processed. 321 @retval EFI_NOT_STARTED This EFI IPv4 Protocol instance has not been started. 322 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 323 RARP, etc.) is not finished yet. 324 @retval EFI_INVALID_PARAMETER This is NULL. 325 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 326 @retval EFI_NOT_READY No incoming or outgoing data is processed. 327 @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. 328 Consider increasing the polling rate. 329 330 **/ 331 EFI_STATUS 332 EFIAPI 333 EfiIp4Poll ( 334 IN EFI_IP4_PROTOCOL *This 335 ); 336 337 EFI_IP4_PROTOCOL 338 mEfiIp4ProtocolTemplete = { 339 EfiIp4GetModeData, 340 EfiIp4Configure, 341 EfiIp4Groups, 342 EfiIp4Routes, 343 EfiIp4Transmit, 344 EfiIp4Receive, 345 EfiIp4Cancel, 346 EfiIp4Poll 347 }; 348 349 /** 350 Gets the current operational settings for this instance of the EFI IPv4 Protocol driver. 351 352 The GetModeData() function returns the current operational mode data for this 353 driver instance. The data fields in EFI_IP4_MODE_DATA are read only. This 354 function is used optionally to retrieve the operational mode data of underlying 355 networks or drivers. 356 357 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 358 @param[out] Ip4ModeData Pointer to the EFI IPv4 Protocol mode data structure. 359 @param[out] MnpConfigData Pointer to the managed network configuration data structure. 360 @param[out] SnpModeData Pointer to the simple network mode data structure. 361 362 @retval EFI_SUCCESS The operation completed successfully. 363 @retval EFI_INVALID_PARAMETER This is NULL. 364 @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated. 365 366 **/ 367 EFI_STATUS 368 EFIAPI 369 EfiIp4GetModeData ( 370 IN CONST EFI_IP4_PROTOCOL *This, 371 OUT EFI_IP4_MODE_DATA *Ip4ModeData OPTIONAL, 372 OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, 373 OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL 374 ) 375 { 376 IP4_PROTOCOL *IpInstance; 377 IP4_SERVICE *IpSb; 378 EFI_IP4_CONFIG_DATA *Config; 379 EFI_STATUS Status; 380 EFI_TPL OldTpl; 381 IP4_ADDR Ip; 382 383 if (This == NULL) { 384 return EFI_INVALID_PARAMETER; 385 } 386 387 OldTpl = gBS->RaiseTPL (TPL_CALLBACK); 388 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 389 IpSb = IpInstance->Service; 390 391 if (Ip4ModeData != NULL) { 392 // 393 // IsStarted is "whether the EfiIp4Configure has been called". 394 // IsConfigured is "whether the station address has been configured" 395 // 396 Ip4ModeData->IsStarted = (BOOLEAN)(IpInstance->State == IP4_STATE_CONFIGED); 397 CopyMem (&Ip4ModeData->ConfigData, &IpInstance->ConfigData, sizeof (Ip4ModeData->ConfigData)); 398 Ip4ModeData->IsConfigured = FALSE; 399 400 Ip4ModeData->GroupCount = IpInstance->GroupCount; 401 Ip4ModeData->GroupTable = (EFI_IPv4_ADDRESS *) IpInstance->Groups; 402 403 Ip4ModeData->IcmpTypeCount = 23; 404 Ip4ModeData->IcmpTypeList = mIp4SupportedIcmp; 405 406 Ip4ModeData->RouteTable = NULL; 407 Ip4ModeData->RouteCount = 0; 408 409 Ip4ModeData->MaxPacketSize = IpSb->MaxPacketSize; 410 411 // 412 // return the current station address for this IP child. So, 413 // the user can get the default address through this. Some 414 // application wants to know it station address even it is 415 // using the default one, such as a ftp server. 416 // 417 if (Ip4ModeData->IsStarted) { 418 Config = &Ip4ModeData->ConfigData; 419 420 Ip = HTONL (IpInstance->Interface->Ip); 421 CopyMem (&Config->StationAddress, &Ip, sizeof (EFI_IPv4_ADDRESS)); 422 423 Ip = HTONL (IpInstance->Interface->SubnetMask); 424 CopyMem (&Config->SubnetMask, &Ip, sizeof (EFI_IPv4_ADDRESS)); 425 426 Ip4ModeData->IsConfigured = IpInstance->Interface->Configured; 427 428 // 429 // Build a EFI route table for user from the internal route table. 430 // 431 Status = Ip4BuildEfiRouteTable (IpInstance); 432 433 if (EFI_ERROR (Status)) { 434 gBS->RestoreTPL (OldTpl); 435 return Status; 436 } 437 438 Ip4ModeData->RouteTable = IpInstance->EfiRouteTable; 439 Ip4ModeData->RouteCount = IpInstance->EfiRouteCount; 440 } 441 } 442 443 // 444 // Get fresh mode data from MNP, since underlying media status may change 445 // 446 Status = IpSb->Mnp->GetModeData (IpSb->Mnp, MnpConfigData, SnpModeData); 447 448 gBS->RestoreTPL (OldTpl); 449 return Status; 450 } 451 452 453 /** 454 Config the MNP parameter used by IP. The IP driver use one MNP 455 child to transmit/receive frames. By default, it configures MNP 456 to receive unicast/multicast/broadcast. And it will enable/disable 457 the promiscous receive according to whether there is IP child 458 enable that or not. If Force is FALSE, it will iterate through 459 all the IP children to check whether the promiscuous receive 460 setting has been changed. If it hasn't been changed, it won't 461 reconfigure the MNP. If Force is TRUE, the MNP is configured no 462 matter whether that is changed or not. 463 464 @param[in] IpSb The IP4 service instance that is to be changed. 465 @param[in] Force Force the configuration or not. 466 467 @retval EFI_SUCCESS The MNP is successfully configured/reconfigured. 468 @retval Others Configuration failed. 469 470 **/ 471 EFI_STATUS 472 Ip4ServiceConfigMnp ( 473 IN IP4_SERVICE *IpSb, 474 IN BOOLEAN Force 475 ) 476 { 477 LIST_ENTRY *Entry; 478 LIST_ENTRY *ProtoEntry; 479 IP4_INTERFACE *IpIf; 480 IP4_PROTOCOL *IpInstance; 481 BOOLEAN Reconfig; 482 BOOLEAN PromiscReceive; 483 EFI_STATUS Status; 484 485 Reconfig = FALSE; 486 PromiscReceive = FALSE; 487 488 if (!Force) { 489 // 490 // Iterate through the IP children to check whether promiscuous 491 // receive setting has been changed. Update the interface's receive 492 // filter also. 493 // 494 NET_LIST_FOR_EACH (Entry, &IpSb->Interfaces) { 495 496 IpIf = NET_LIST_USER_STRUCT (Entry, IP4_INTERFACE, Link); 497 IpIf->PromiscRecv = FALSE; 498 499 NET_LIST_FOR_EACH (ProtoEntry, &IpIf->IpInstances) { 500 IpInstance = NET_LIST_USER_STRUCT (ProtoEntry, IP4_PROTOCOL, AddrLink); 501 502 if (IpInstance->ConfigData.AcceptPromiscuous) { 503 IpIf->PromiscRecv = TRUE; 504 PromiscReceive = TRUE; 505 } 506 } 507 } 508 509 // 510 // If promiscuous receive isn't changed, it isn't necessary to reconfigure. 511 // 512 if (PromiscReceive == IpSb->MnpConfigData.EnablePromiscuousReceive) { 513 return EFI_SUCCESS; 514 } 515 516 Reconfig = TRUE; 517 IpSb->MnpConfigData.EnablePromiscuousReceive = PromiscReceive; 518 } 519 520 Status = IpSb->Mnp->Configure (IpSb->Mnp, &IpSb->MnpConfigData); 521 522 // 523 // recover the original configuration if failed to set the configure. 524 // 525 if (EFI_ERROR (Status) && Reconfig) { 526 IpSb->MnpConfigData.EnablePromiscuousReceive = (BOOLEAN) !PromiscReceive; 527 } 528 529 return Status; 530 } 531 532 533 /** 534 Intiialize the IP4_PROTOCOL structure to the unconfigured states. 535 536 @param IpSb The IP4 service instance. 537 @param IpInstance The IP4 child instance. 538 539 **/ 540 VOID 541 Ip4InitProtocol ( 542 IN IP4_SERVICE *IpSb, 543 IN OUT IP4_PROTOCOL *IpInstance 544 ) 545 { 546 ASSERT ((IpSb != NULL) && (IpInstance != NULL)); 547 548 ZeroMem (IpInstance, sizeof (IP4_PROTOCOL)); 549 550 IpInstance->Signature = IP4_PROTOCOL_SIGNATURE; 551 CopyMem (&IpInstance->Ip4Proto, &mEfiIp4ProtocolTemplete, sizeof (IpInstance->Ip4Proto)); 552 IpInstance->State = IP4_STATE_UNCONFIGED; 553 IpInstance->Service = IpSb; 554 555 InitializeListHead (&IpInstance->Link); 556 NetMapInit (&IpInstance->RxTokens); 557 NetMapInit (&IpInstance->TxTokens); 558 InitializeListHead (&IpInstance->Received); 559 InitializeListHead (&IpInstance->Delivered); 560 InitializeListHead (&IpInstance->AddrLink); 561 562 EfiInitializeLock (&IpInstance->RecycleLock, TPL_NOTIFY); 563 } 564 565 566 /** 567 The event handle for IP4 auto reconfiguration. The original default 568 interface and route table will be removed as the default. 569 570 @param[in] Context The IP4 service binding instance. 571 572 **/ 573 VOID 574 EFIAPI 575 Ip4AutoReconfigCallBackDpc ( 576 IN VOID *Context 577 ) 578 { 579 IP4_SERVICE *IpSb; 580 581 IpSb = (IP4_SERVICE *) Context; 582 NET_CHECK_SIGNATURE (IpSb, IP4_SERVICE_SIGNATURE); 583 584 if (IpSb->State > IP4_SERVICE_UNSTARTED) { 585 IpSb->State = IP4_SERVICE_UNSTARTED; 586 } 587 588 IpSb->Reconfig = TRUE; 589 590 Ip4StartAutoConfig (&IpSb->Ip4Config2Instance); 591 592 return ; 593 } 594 595 596 /** 597 Request Ip4AutoReconfigCallBackDpc as a DPC at TPL_CALLBACK. 598 599 @param Event The event that is signalled. 600 @param Context The IP4 service binding instance. 601 602 **/ 603 VOID 604 EFIAPI 605 Ip4AutoReconfigCallBack ( 606 IN EFI_EVENT Event, 607 IN VOID *Context 608 ) 609 { 610 // 611 // Request Ip4AutoReconfigCallBackDpc as a DPC at TPL_CALLBACK 612 // 613 QueueDpc (TPL_CALLBACK, Ip4AutoReconfigCallBackDpc, Context); 614 } 615 616 617 /** 618 Configure the IP4 child. If the child is already configured, 619 change the configuration parameter. Otherwise configure it 620 for the first time. The caller should validate the configuration 621 before deliver them to it. It also don't do configure NULL. 622 623 @param[in, out] IpInstance The IP4 child to configure. 624 @param[in] Config The configure data. 625 626 @retval EFI_SUCCESS The IP4 child is successfully configured. 627 @retval EFI_DEVICE_ERROR Failed to free the pending transive or to 628 configure underlying MNP or other errors. 629 @retval EFI_NO_MAPPING The IP4 child is configured to use default 630 address, but the default address hasn't been 631 configured. The IP4 child doesn't need to be 632 reconfigured when default address is configured. 633 @retval EFI_OUT_OF_RESOURCES No more memory space is available. 634 @retval other Other error occurs. 635 636 **/ 637 EFI_STATUS 638 Ip4ConfigProtocol ( 639 IN OUT IP4_PROTOCOL *IpInstance, 640 IN EFI_IP4_CONFIG_DATA *Config 641 ) 642 { 643 IP4_SERVICE *IpSb; 644 IP4_INTERFACE *IpIf; 645 EFI_STATUS Status; 646 IP4_ADDR Ip; 647 IP4_ADDR Netmask; 648 EFI_ARP_PROTOCOL *Arp; 649 650 IpSb = IpInstance->Service; 651 652 // 653 // User is changing packet filters. It must be stopped 654 // before the station address can be changed. 655 // 656 if (IpInstance->State == IP4_STATE_CONFIGED) { 657 // 658 // Cancel all the pending transmit/receive from upper layer 659 // 660 Status = Ip4Cancel (IpInstance, NULL); 661 662 if (EFI_ERROR (Status)) { 663 return EFI_DEVICE_ERROR; 664 } 665 666 CopyMem (&IpInstance->ConfigData, Config, sizeof (IpInstance->ConfigData)); 667 return EFI_SUCCESS; 668 } 669 670 // 671 // Configure a fresh IP4 protocol instance. Create a route table. 672 // Each IP child has its own route table, which may point to the 673 // default table if it is using default address. 674 // 675 Status = EFI_OUT_OF_RESOURCES; 676 IpInstance->RouteTable = Ip4CreateRouteTable (); 677 678 if (IpInstance->RouteTable == NULL) { 679 return Status; 680 } 681 682 // 683 // Set up the interface. 684 // 685 CopyMem (&Ip, &Config->StationAddress, sizeof (IP4_ADDR)); 686 CopyMem (&Netmask, &Config->SubnetMask, sizeof (IP4_ADDR)); 687 688 Ip = NTOHL (Ip); 689 Netmask = NTOHL (Netmask); 690 691 if (!Config->UseDefaultAddress) { 692 // 693 // Find whether there is already an interface with the same 694 // station address. All the instances with the same station 695 // address shares one interface. 696 // 697 IpIf = Ip4FindStationAddress (IpSb, Ip, Netmask); 698 699 if (IpIf != NULL) { 700 NET_GET_REF (IpIf); 701 702 } else { 703 IpIf = Ip4CreateInterface (IpSb->Mnp, IpSb->Controller, IpSb->Image); 704 705 if (IpIf == NULL) { 706 goto ON_ERROR; 707 } 708 709 Status = Ip4SetAddress (IpIf, Ip, Netmask); 710 711 if (EFI_ERROR (Status)) { 712 Status = EFI_DEVICE_ERROR; 713 Ip4FreeInterface (IpIf, IpInstance); 714 goto ON_ERROR; 715 } 716 717 InsertTailList (&IpSb->Interfaces, &IpIf->Link); 718 } 719 720 // 721 // Add a route to this connected network in the route table 722 // 723 Ip4AddRoute (IpInstance->RouteTable, Ip, Netmask, IP4_ALLZERO_ADDRESS); 724 725 } else { 726 // 727 // Use the default address. If the default configuration hasn't 728 // been started, start it. 729 // 730 if (IpSb->State == IP4_SERVICE_UNSTARTED) { 731 // 732 // Create the ReconfigEvent to start the new configuration. 733 // 734 if (IpSb->ReconfigEvent == NULL) { 735 Status = gBS->CreateEvent ( 736 EVT_NOTIFY_SIGNAL, 737 TPL_NOTIFY, 738 Ip4AutoReconfigCallBack, 739 IpSb, 740 &IpSb->ReconfigEvent 741 ); 742 743 if (EFI_ERROR (Status)) { 744 goto ON_ERROR; 745 } 746 } 747 748 Status = Ip4StartAutoConfig (&IpSb->Ip4Config2Instance); 749 750 if (EFI_ERROR (Status)) { 751 goto CLOSE_RECONFIG_EVENT; 752 } 753 } 754 755 IpIf = IpSb->DefaultInterface; 756 NET_GET_REF (IpSb->DefaultInterface); 757 758 // 759 // If default address is used, so is the default route table. 760 // Any route set by the instance has the precedence over the 761 // routes in the default route table. Link the default table 762 // after the instance's table. Routing will search the local 763 // table first. 764 // 765 NET_GET_REF (IpSb->DefaultRouteTable); 766 IpInstance->RouteTable->Next = IpSb->DefaultRouteTable; 767 } 768 769 IpInstance->Interface = IpIf; 770 if (IpIf->Arp != NULL) { 771 Arp = NULL; 772 Status = gBS->OpenProtocol ( 773 IpIf->ArpHandle, 774 &gEfiArpProtocolGuid, 775 (VOID **) &Arp, 776 gIp4DriverBinding.DriverBindingHandle, 777 IpInstance->Handle, 778 EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER 779 ); 780 if (EFI_ERROR (Status)) { 781 goto CLOSE_RECONFIG_EVENT; 782 } 783 } 784 InsertTailList (&IpIf->IpInstances, &IpInstance->AddrLink); 785 786 CopyMem (&IpInstance->ConfigData, Config, sizeof (IpInstance->ConfigData)); 787 IpInstance->State = IP4_STATE_CONFIGED; 788 789 // 790 // Although EFI_NO_MAPPING is an error code, the IP child has been 791 // successfully configured and doesn't need reconfiguration when 792 // default address is acquired. 793 // 794 if (Config->UseDefaultAddress && IP4_NO_MAPPING (IpInstance)) { 795 return EFI_NO_MAPPING; 796 } 797 798 return EFI_SUCCESS; 799 800 CLOSE_RECONFIG_EVENT: 801 if (IpSb->ReconfigEvent != NULL) { 802 gBS->CloseEvent (IpSb->ReconfigEvent); 803 IpSb->ReconfigEvent = NULL; 804 } 805 806 ON_ERROR: 807 Ip4FreeRouteTable (IpInstance->RouteTable); 808 IpInstance->RouteTable = NULL; 809 return Status; 810 } 811 812 813 /** 814 Clean up the IP4 child, release all the resources used by it. 815 816 @param[in] IpInstance The IP4 child to clean up. 817 818 @retval EFI_SUCCESS The IP4 child is cleaned up. 819 @retval EFI_DEVICE_ERROR Some resources failed to be released. 820 821 **/ 822 EFI_STATUS 823 Ip4CleanProtocol ( 824 IN IP4_PROTOCOL *IpInstance 825 ) 826 { 827 if (EFI_ERROR (Ip4Cancel (IpInstance, NULL))) { 828 return EFI_DEVICE_ERROR; 829 } 830 831 if (EFI_ERROR (Ip4Groups (IpInstance, FALSE, NULL))) { 832 return EFI_DEVICE_ERROR; 833 } 834 835 // 836 // Some packets haven't been recycled. It is because either the 837 // user forgets to recycle the packets, or because the callback 838 // hasn't been called. Just leave it alone. 839 // 840 if (!IsListEmpty (&IpInstance->Delivered)) { 841 ; 842 } 843 844 if (IpInstance->Interface != NULL) { 845 RemoveEntryList (&IpInstance->AddrLink); 846 if (IpInstance->Interface->Arp != NULL) { 847 gBS->CloseProtocol ( 848 IpInstance->Interface->ArpHandle, 849 &gEfiArpProtocolGuid, 850 gIp4DriverBinding.DriverBindingHandle, 851 IpInstance->Handle 852 ); 853 } 854 Ip4FreeInterface (IpInstance->Interface, IpInstance); 855 IpInstance->Interface = NULL; 856 } 857 858 if (IpInstance->RouteTable != NULL) { 859 if (IpInstance->RouteTable->Next != NULL) { 860 Ip4FreeRouteTable (IpInstance->RouteTable->Next); 861 } 862 863 Ip4FreeRouteTable (IpInstance->RouteTable); 864 IpInstance->RouteTable = NULL; 865 } 866 867 if (IpInstance->EfiRouteTable != NULL) { 868 FreePool (IpInstance->EfiRouteTable); 869 IpInstance->EfiRouteTable = NULL; 870 IpInstance->EfiRouteCount = 0; 871 } 872 873 if (IpInstance->Groups != NULL) { 874 FreePool (IpInstance->Groups); 875 IpInstance->Groups = NULL; 876 IpInstance->GroupCount = 0; 877 } 878 879 NetMapClean (&IpInstance->TxTokens); 880 881 NetMapClean (&IpInstance->RxTokens); 882 883 return EFI_SUCCESS; 884 } 885 886 887 /** 888 Validate that Ip/Netmask pair is OK to be used as station 889 address. Only continuous netmasks are supported. and check 890 that StationAddress is a unicast address on the newtwork. 891 892 @param[in] Ip The IP address to validate. 893 @param[in] Netmask The netmaks of the IP. 894 895 @retval TRUE The Ip/Netmask pair is valid. 896 @retval FALSE The Ip/Netmask pair is invalid. 897 898 **/ 899 BOOLEAN 900 Ip4StationAddressValid ( 901 IN IP4_ADDR Ip, 902 IN IP4_ADDR Netmask 903 ) 904 { 905 IP4_ADDR NetBrdcastMask; 906 INTN Len; 907 INTN Type; 908 909 // 910 // Only support the station address with 0.0.0.0/0 to enable DHCP client. 911 // 912 if (Netmask == IP4_ALLZERO_ADDRESS) { 913 return (BOOLEAN) (Ip == IP4_ALLZERO_ADDRESS); 914 } 915 916 // 917 // Only support the continuous net masks 918 // 919 if ((Len = NetGetMaskLength (Netmask)) == IP4_MASK_NUM) { 920 return FALSE; 921 } 922 923 // 924 // Station address can't be class D or class E address 925 // 926 if ((Type = NetGetIpClass (Ip)) > IP4_ADDR_CLASSC) { 927 return FALSE; 928 } 929 930 // 931 // Station address can't be subnet broadcast/net broadcast address 932 // 933 if ((Ip == (Ip & Netmask)) || (Ip == (Ip | ~Netmask))) { 934 return FALSE; 935 } 936 937 NetBrdcastMask = gIp4AllMasks[MIN (Len, Type << 3)]; 938 939 if (Ip == (Ip | ~NetBrdcastMask)) { 940 return FALSE; 941 } 942 943 return TRUE; 944 } 945 946 947 /** 948 Assigns an IPv4 address and subnet mask to this EFI IPv4 Protocol driver instance. 949 950 The Configure() function is used to set, change, or reset the operational 951 parameters and filter settings for this EFI IPv4 Protocol instance. Until these 952 parameters have been set, no network traffic can be sent or received by this 953 instance. Once the parameters have been reset (by calling this function with 954 IpConfigData set to NULL), no more traffic can be sent or received until these 955 parameters have been set again. Each EFI IPv4 Protocol instance can be started 956 and stopped independently of each other by enabling or disabling their receive 957 filter settings with the Configure() function. 958 959 When IpConfigData.UseDefaultAddress is set to FALSE, the new station address will 960 be appended as an alias address into the addresses list in the EFI IPv4 Protocol 961 driver. While set to TRUE, Configure() will trigger the EFI_IP4_CONFIG_PROTOCOL 962 to retrieve the default IPv4 address if it is not available yet. Clients could 963 frequently call GetModeData() to check the status to ensure that the default IPv4 964 address is ready. 965 966 If operational parameters are reset or changed, any pending transmit and receive 967 requests will be cancelled. Their completion token status will be set to EFI_ABORTED 968 and their events will be signaled. 969 970 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 971 @param[in] IpConfigData Pointer to the EFI IPv4 Protocol configuration data structure. 972 973 @retval EFI_SUCCESS The driver instance was successfully opened. 974 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 975 RARP, etc.) is not finished yet. 976 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 977 @retval EFI_UNSUPPORTED One or more of the following conditions is TRUE: 978 A configuration protocol (DHCP, BOOTP, RARP, etc.) could 979 not be located when clients choose to use the default IPv4 980 address. This EFI IPv4 Protocol implementation does not 981 support this requested filter or timeout setting. 982 @retval EFI_OUT_OF_RESOURCES The EFI IPv4 Protocol driver instance data could not be allocated. 983 @retval EFI_ALREADY_STARTED The interface is already open and must be stopped before the 984 IPv4 address or subnet mask can be changed. The interface must 985 also be stopped when switching to/from raw packet mode. 986 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI IPv4 987 Protocol driver instance is not opened. 988 989 **/ 990 EFI_STATUS 991 EFIAPI 992 EfiIp4Configure ( 993 IN EFI_IP4_PROTOCOL *This, 994 IN EFI_IP4_CONFIG_DATA *IpConfigData OPTIONAL 995 ) 996 { 997 IP4_PROTOCOL *IpInstance; 998 EFI_IP4_CONFIG_DATA *Current; 999 EFI_TPL OldTpl; 1000 EFI_STATUS Status; 1001 BOOLEAN AddrOk; 1002 IP4_ADDR IpAddress; 1003 IP4_ADDR SubnetMask; 1004 1005 // 1006 // First, validate the parameters 1007 // 1008 if (This == NULL) { 1009 return EFI_INVALID_PARAMETER; 1010 } 1011 1012 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 1013 OldTpl = gBS->RaiseTPL (TPL_CALLBACK); 1014 1015 // 1016 // Validate the configuration first. 1017 // 1018 if (IpConfigData != NULL) { 1019 1020 CopyMem (&IpAddress, &IpConfigData->StationAddress, sizeof (IP4_ADDR)); 1021 CopyMem (&SubnetMask, &IpConfigData->SubnetMask, sizeof (IP4_ADDR)); 1022 1023 IpAddress = NTOHL (IpAddress); 1024 SubnetMask = NTOHL (SubnetMask); 1025 1026 // 1027 // Check whether the station address is a valid unicast address 1028 // 1029 if (!IpConfigData->UseDefaultAddress) { 1030 AddrOk = Ip4StationAddressValid (IpAddress, SubnetMask); 1031 1032 if (!AddrOk) { 1033 Status = EFI_INVALID_PARAMETER; 1034 goto ON_EXIT; 1035 } 1036 } 1037 1038 // 1039 // User can only update packet filters when already configured. 1040 // If it wants to change the station address, it must configure(NULL) 1041 // the instance first. 1042 // 1043 if (IpInstance->State == IP4_STATE_CONFIGED) { 1044 Current = &IpInstance->ConfigData; 1045 1046 if (Current->UseDefaultAddress != IpConfigData->UseDefaultAddress) { 1047 Status = EFI_ALREADY_STARTED; 1048 goto ON_EXIT; 1049 } 1050 1051 if (!Current->UseDefaultAddress && 1052 (!EFI_IP4_EQUAL (&Current->StationAddress, &IpConfigData->StationAddress) || 1053 !EFI_IP4_EQUAL (&Current->SubnetMask, &IpConfigData->SubnetMask))) { 1054 Status = EFI_ALREADY_STARTED; 1055 goto ON_EXIT; 1056 } 1057 1058 if (Current->UseDefaultAddress && IP4_NO_MAPPING (IpInstance)) { 1059 Status = EFI_NO_MAPPING; 1060 goto ON_EXIT; 1061 } 1062 } 1063 } 1064 1065 // 1066 // Configure the instance or clean it up. 1067 // 1068 if (IpConfigData != NULL) { 1069 Status = Ip4ConfigProtocol (IpInstance, IpConfigData); 1070 } else { 1071 Status = Ip4CleanProtocol (IpInstance); 1072 1073 // 1074 // Don't change the state if it is DESTROY, consider the following 1075 // valid sequence: Mnp is unloaded-->Ip Stopped-->Udp Stopped, 1076 // Configure (ThisIp, NULL). If the state is changed to UNCONFIGED, 1077 // the unload fails miserably. 1078 // 1079 if (IpInstance->State == IP4_STATE_CONFIGED) { 1080 IpInstance->State = IP4_STATE_UNCONFIGED; 1081 } 1082 } 1083 1084 // 1085 // Update the MNP's configure data. Ip4ServiceConfigMnp will check 1086 // whether it is necessary to reconfigure the MNP. 1087 // 1088 Ip4ServiceConfigMnp (IpInstance->Service, FALSE); 1089 1090 ON_EXIT: 1091 gBS->RestoreTPL (OldTpl); 1092 return Status; 1093 1094 } 1095 1096 1097 /** 1098 Change the IP4 child's multicast setting. The caller 1099 should make sure that the parameters is valid. 1100 1101 @param[in] IpInstance The IP4 child to change the setting. 1102 @param[in] JoinFlag TRUE to join the group, otherwise leave it. 1103 @param[in] GroupAddress The target group address. 1104 1105 @retval EFI_ALREADY_STARTED Want to join the group, but already a member of it. 1106 @retval EFI_OUT_OF_RESOURCES Failed to allocate some resources. 1107 @retval EFI_DEVICE_ERROR Failed to set the group configuraton. 1108 @retval EFI_SUCCESS Successfully updated the group setting. 1109 @retval EFI_NOT_FOUND Try to leave the group which it isn't a member. 1110 1111 **/ 1112 EFI_STATUS 1113 Ip4Groups ( 1114 IN IP4_PROTOCOL *IpInstance, 1115 IN BOOLEAN JoinFlag, 1116 IN EFI_IPv4_ADDRESS *GroupAddress OPTIONAL 1117 ) 1118 { 1119 IP4_ADDR *Members; 1120 IP4_ADDR Group; 1121 UINT32 Index; 1122 1123 // 1124 // Add it to the instance's Groups, and join the group by IGMP. 1125 // IpInstance->Groups is in network byte order. IGMP operates in 1126 // host byte order 1127 // 1128 if (JoinFlag) { 1129 // 1130 // When JoinFlag is TRUE, GroupAddress shouldn't be NULL. 1131 // 1132 ASSERT (GroupAddress != NULL); 1133 CopyMem (&Group, GroupAddress, sizeof (IP4_ADDR)); 1134 1135 for (Index = 0; Index < IpInstance->GroupCount; Index++) { 1136 if (IpInstance->Groups[Index] == Group) { 1137 return EFI_ALREADY_STARTED; 1138 } 1139 } 1140 1141 Members = Ip4CombineGroups (IpInstance->Groups, IpInstance->GroupCount, Group); 1142 1143 if (Members == NULL) { 1144 return EFI_OUT_OF_RESOURCES; 1145 } 1146 1147 if (EFI_ERROR (Ip4JoinGroup (IpInstance, NTOHL (Group)))) { 1148 FreePool (Members); 1149 return EFI_DEVICE_ERROR; 1150 } 1151 1152 if (IpInstance->Groups != NULL) { 1153 FreePool (IpInstance->Groups); 1154 } 1155 1156 IpInstance->Groups = Members; 1157 IpInstance->GroupCount++; 1158 1159 return EFI_SUCCESS; 1160 } 1161 1162 // 1163 // Leave the group. Leave all the groups if GroupAddress is NULL. 1164 // Must iterate from the end to the beginning because the GroupCount 1165 // is decreamented each time an address is removed.. 1166 // 1167 for (Index = IpInstance->GroupCount; Index > 0 ; Index--) { 1168 Group = IpInstance->Groups[Index - 1]; 1169 1170 if ((GroupAddress == NULL) || EFI_IP4_EQUAL (&Group, GroupAddress)) { 1171 if (EFI_ERROR (Ip4LeaveGroup (IpInstance, NTOHL (Group)))) { 1172 return EFI_DEVICE_ERROR; 1173 } 1174 1175 Ip4RemoveGroupAddr (IpInstance->Groups, IpInstance->GroupCount, Group); 1176 IpInstance->GroupCount--; 1177 1178 if (IpInstance->GroupCount == 0) { 1179 ASSERT (Index == 1); 1180 1181 FreePool (IpInstance->Groups); 1182 IpInstance->Groups = NULL; 1183 } 1184 1185 if (GroupAddress != NULL) { 1186 return EFI_SUCCESS; 1187 } 1188 } 1189 } 1190 1191 return ((GroupAddress != NULL) ? EFI_NOT_FOUND : EFI_SUCCESS); 1192 } 1193 1194 1195 /** 1196 Joins and leaves multicast groups. 1197 1198 The Groups() function is used to join and leave multicast group sessions. Joining 1199 a group will enable reception of matching multicast packets. Leaving a group will 1200 disable the multicast packet reception. 1201 1202 If JoinFlag is FALSE and GroupAddress is NULL, all joined groups will be left. 1203 1204 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 1205 @param[in] JoinFlag Set to TRUE to join the multicast group session and FALSE to leave. 1206 @param[in] GroupAddress Pointer to the IPv4 multicast address. 1207 1208 @retval EFI_SUCCESS The operation completed successfully. 1209 @retval EFI_INVALID_PARAMETER One or more of the following is TRUE: 1210 - This is NULL. 1211 - JoinFlag is TRUE and GroupAddress is NULL. 1212 - GroupAddress is not NULL and *GroupAddress is 1213 not a multicast IPv4 address. 1214 @retval EFI_NOT_STARTED This instance has not been started. 1215 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 1216 RARP, etc.) is not finished yet. 1217 @retval EFI_OUT_OF_RESOURCES System resources could not be allocated. 1218 @retval EFI_UNSUPPORTED This EFI IPv4 Protocol implementation does not support multicast groups. 1219 @retval EFI_ALREADY_STARTED The group address is already in the group table (when 1220 JoinFlag is TRUE). 1221 @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is FALSE). 1222 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 1223 1224 **/ 1225 EFI_STATUS 1226 EFIAPI 1227 EfiIp4Groups ( 1228 IN EFI_IP4_PROTOCOL *This, 1229 IN BOOLEAN JoinFlag, 1230 IN EFI_IPv4_ADDRESS *GroupAddress OPTIONAL 1231 ) 1232 { 1233 IP4_PROTOCOL *IpInstance; 1234 EFI_STATUS Status; 1235 EFI_TPL OldTpl; 1236 IP4_ADDR McastIp; 1237 1238 if ((This == NULL) || (JoinFlag && (GroupAddress == NULL))) { 1239 return EFI_INVALID_PARAMETER; 1240 } 1241 1242 if (GroupAddress != NULL) { 1243 CopyMem (&McastIp, GroupAddress, sizeof (IP4_ADDR)); 1244 1245 if (!IP4_IS_MULTICAST (NTOHL (McastIp))) { 1246 return EFI_INVALID_PARAMETER; 1247 } 1248 } 1249 1250 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 1251 OldTpl = gBS->RaiseTPL (TPL_CALLBACK); 1252 1253 if (IpInstance->State != IP4_STATE_CONFIGED) { 1254 Status = EFI_NOT_STARTED; 1255 goto ON_EXIT; 1256 } 1257 1258 if (IpInstance->ConfigData.UseDefaultAddress && IP4_NO_MAPPING (IpInstance)) { 1259 Status = EFI_NO_MAPPING; 1260 goto ON_EXIT; 1261 } 1262 1263 Status = Ip4Groups (IpInstance, JoinFlag, GroupAddress); 1264 1265 ON_EXIT: 1266 gBS->RestoreTPL (OldTpl); 1267 return Status; 1268 } 1269 1270 1271 /** 1272 Adds and deletes routing table entries. 1273 1274 The Routes() function adds a route to or deletes a route from the routing table. 1275 1276 Routes are determined by comparing the SubnetAddress with the destination IPv4 1277 address arithmetically AND-ed with the SubnetMask. The gateway address must be 1278 on the same subnet as the configured station address. 1279 1280 The default route is added with SubnetAddress and SubnetMask both set to 0.0.0.0. 1281 The default route matches all destination IPv4 addresses that do not match any 1282 other routes. 1283 1284 A GatewayAddress that is zero is a nonroute. Packets are sent to the destination 1285 IP address if it can be found in the ARP cache or on the local subnet. One automatic 1286 nonroute entry will be inserted into the routing table for outgoing packets that 1287 are addressed to a local subnet (gateway address of 0.0.0.0). 1288 1289 Each EFI IPv4 Protocol instance has its own independent routing table. Those EFI 1290 IPv4 Protocol instances that use the default IPv4 address will also have copies 1291 of the routing table that was provided by the EFI_IP4_CONFIG_PROTOCOL, and these 1292 copies will be updated whenever the EIF IPv4 Protocol driver reconfigures its 1293 instances. As a result, client modification to the routing table will be lost. 1294 1295 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 1296 @param[in] DeleteRoute Set to TRUE to delete this route from the routing table. Set to 1297 FALSE to add this route to the routing table. SubnetAddress 1298 and SubnetMask are used as the key to each route entry. 1299 @param[in] SubnetAddress The address of the subnet that needs to be routed. 1300 @param[in] SubnetMask The subnet mask of SubnetAddress. 1301 @param[in] GatewayAddress The unicast gateway IPv4 address for this route. 1302 1303 @retval EFI_SUCCESS The operation completed successfully. 1304 @retval EFI_NOT_STARTED The driver instance has not been started. 1305 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 1306 RARP, etc.) is not finished yet. 1307 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 1308 - This is NULL. 1309 - SubnetAddress is NULL. 1310 - SubnetMask is NULL. 1311 - GatewayAddress is NULL. 1312 - *SubnetAddress is not a valid subnet address. 1313 - *SubnetMask is not a valid subnet mask. 1314 - *GatewayAddress is not a valid unicast IPv4 address. 1315 @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table. 1316 @retval EFI_NOT_FOUND This route is not in the routing table (when DeleteRoute is TRUE). 1317 @retval EFI_ACCESS_DENIED The route is already defined in the routing table (when 1318 DeleteRoute is FALSE). 1319 1320 **/ 1321 EFI_STATUS 1322 EFIAPI 1323 EfiIp4Routes ( 1324 IN EFI_IP4_PROTOCOL *This, 1325 IN BOOLEAN DeleteRoute, 1326 IN EFI_IPv4_ADDRESS *SubnetAddress, 1327 IN EFI_IPv4_ADDRESS *SubnetMask, 1328 IN EFI_IPv4_ADDRESS *GatewayAddress 1329 ) 1330 { 1331 IP4_PROTOCOL *IpInstance; 1332 IP4_INTERFACE *IpIf; 1333 IP4_ADDR Dest; 1334 IP4_ADDR Netmask; 1335 IP4_ADDR Nexthop; 1336 EFI_STATUS Status; 1337 EFI_TPL OldTpl; 1338 1339 // 1340 // First, validate the parameters 1341 // 1342 if ((This == NULL) || (SubnetAddress == NULL) || 1343 (SubnetMask == NULL) || (GatewayAddress == NULL)) { 1344 return EFI_INVALID_PARAMETER; 1345 } 1346 1347 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 1348 OldTpl = gBS->RaiseTPL (TPL_CALLBACK); 1349 1350 if (IpInstance->State != IP4_STATE_CONFIGED) { 1351 Status = EFI_NOT_STARTED; 1352 goto ON_EXIT; 1353 } 1354 1355 if (IpInstance->ConfigData.UseDefaultAddress && IP4_NO_MAPPING (IpInstance)) { 1356 Status = EFI_NO_MAPPING; 1357 goto ON_EXIT; 1358 } 1359 1360 CopyMem (&Dest, SubnetAddress, sizeof (IP4_ADDR)); 1361 CopyMem (&Netmask, SubnetMask, sizeof (IP4_ADDR)); 1362 CopyMem (&Nexthop, GatewayAddress, sizeof (IP4_ADDR)); 1363 1364 Dest = NTOHL (Dest); 1365 Netmask = NTOHL (Netmask); 1366 Nexthop = NTOHL (Nexthop); 1367 1368 IpIf = IpInstance->Interface; 1369 1370 if (!IP4_IS_VALID_NETMASK (Netmask)) { 1371 Status = EFI_INVALID_PARAMETER; 1372 goto ON_EXIT; 1373 } 1374 1375 // 1376 // the gateway address must be a unicast on the connected network if not zero. 1377 // 1378 if ((Nexthop != IP4_ALLZERO_ADDRESS) && 1379 (!IP4_NET_EQUAL (Nexthop, IpIf->Ip, IpIf->SubnetMask) || 1380 IP4_IS_BROADCAST (Ip4GetNetCast (Nexthop, IpIf)))) { 1381 1382 Status = EFI_INVALID_PARAMETER; 1383 goto ON_EXIT; 1384 } 1385 1386 if (DeleteRoute) { 1387 Status = Ip4DelRoute (IpInstance->RouteTable, Dest, Netmask, Nexthop); 1388 } else { 1389 Status = Ip4AddRoute (IpInstance->RouteTable, Dest, Netmask, Nexthop); 1390 } 1391 1392 ON_EXIT: 1393 gBS->RestoreTPL (OldTpl); 1394 return Status; 1395 } 1396 1397 1398 /** 1399 Check whether the user's token or event has already 1400 been enqueued on IP4's list. 1401 1402 @param[in] Map The container of either user's transmit or receive 1403 token. 1404 @param[in] Item Current item to check against. 1405 @param[in] Context The Token to check againist. 1406 1407 @retval EFI_ACCESS_DENIED The token or event has already been enqueued in IP. 1408 @retval EFI_SUCCESS The current item isn't the same token/event as the 1409 context. 1410 1411 **/ 1412 EFI_STATUS 1413 EFIAPI 1414 Ip4TokenExist ( 1415 IN NET_MAP *Map, 1416 IN NET_MAP_ITEM *Item, 1417 IN VOID *Context 1418 ) 1419 { 1420 EFI_IP4_COMPLETION_TOKEN *Token; 1421 EFI_IP4_COMPLETION_TOKEN *TokenInItem; 1422 1423 Token = (EFI_IP4_COMPLETION_TOKEN *) Context; 1424 TokenInItem = (EFI_IP4_COMPLETION_TOKEN *) Item->Key; 1425 1426 if ((Token == TokenInItem) || (Token->Event == TokenInItem->Event)) { 1427 return EFI_ACCESS_DENIED; 1428 } 1429 1430 return EFI_SUCCESS; 1431 } 1432 1433 /** 1434 Validate the user's token against current station address. 1435 1436 @param[in] Token User's token to validate. 1437 @param[in] IpIf The IP4 child's interface. 1438 @param[in] RawData Set to TRUE to send unformatted packets. 1439 1440 @retval EFI_INVALID_PARAMETER Some parameters are invalid. 1441 @retval EFI_BAD_BUFFER_SIZE The user's option/data is too long. 1442 @retval EFI_SUCCESS The token is valid. 1443 1444 **/ 1445 EFI_STATUS 1446 Ip4TxTokenValid ( 1447 IN EFI_IP4_COMPLETION_TOKEN *Token, 1448 IN IP4_INTERFACE *IpIf, 1449 IN BOOLEAN RawData 1450 ) 1451 { 1452 EFI_IP4_TRANSMIT_DATA *TxData; 1453 EFI_IP4_OVERRIDE_DATA *Override; 1454 IP4_ADDR Src; 1455 IP4_ADDR Gateway; 1456 UINT32 Offset; 1457 UINT32 Index; 1458 UINT32 HeadLen; 1459 1460 if ((Token == NULL) || (Token->Event == NULL) || (Token->Packet.TxData == NULL)) { 1461 return EFI_INVALID_PARAMETER; 1462 } 1463 1464 TxData = Token->Packet.TxData; 1465 1466 // 1467 // Check the fragment table: no empty fragment, and length isn't bogus. 1468 // 1469 if ((TxData->TotalDataLength == 0) || (TxData->FragmentCount == 0)) { 1470 return EFI_INVALID_PARAMETER; 1471 } 1472 1473 Offset = TxData->TotalDataLength; 1474 1475 if (Offset > IP4_MAX_PACKET_SIZE) { 1476 return EFI_BAD_BUFFER_SIZE; 1477 } 1478 1479 for (Index = 0; Index < TxData->FragmentCount; Index++) { 1480 if ((TxData->FragmentTable[Index].FragmentBuffer == NULL) || 1481 (TxData->FragmentTable[Index].FragmentLength == 0)) { 1482 1483 return EFI_INVALID_PARAMETER; 1484 } 1485 1486 Offset -= TxData->FragmentTable[Index].FragmentLength; 1487 } 1488 1489 if (Offset != 0) { 1490 return EFI_INVALID_PARAMETER; 1491 } 1492 1493 // 1494 // NOTE that OptionsLength/OptionsBuffer/OverrideData are ignored if RawData 1495 // is TRUE. 1496 // 1497 if (RawData) { 1498 return EFI_SUCCESS; 1499 } 1500 1501 // 1502 // Check the IP options: no more than 40 bytes and format is OK 1503 // 1504 if (TxData->OptionsLength != 0) { 1505 if ((TxData->OptionsLength > 40) || (TxData->OptionsBuffer == NULL)) { 1506 return EFI_INVALID_PARAMETER; 1507 } 1508 1509 if (!Ip4OptionIsValid (TxData->OptionsBuffer, TxData->OptionsLength, FALSE)) { 1510 return EFI_INVALID_PARAMETER; 1511 } 1512 } 1513 1514 // 1515 // Check the source and gateway: they must be a valid unicast. 1516 // Gateway must also be on the connected network. 1517 // 1518 if (TxData->OverrideData != NULL) { 1519 Override = TxData->OverrideData; 1520 1521 CopyMem (&Src, &Override->SourceAddress, sizeof (IP4_ADDR)); 1522 CopyMem (&Gateway, &Override->GatewayAddress, sizeof (IP4_ADDR)); 1523 1524 Src = NTOHL (Src); 1525 Gateway = NTOHL (Gateway); 1526 1527 if ((NetGetIpClass (Src) > IP4_ADDR_CLASSC) || 1528 (Src == IP4_ALLONE_ADDRESS) || 1529 IP4_IS_BROADCAST (Ip4GetNetCast (Src, IpIf))) { 1530 1531 return EFI_INVALID_PARAMETER; 1532 } 1533 1534 // 1535 // If gateway isn't zero, it must be a unicast address, and 1536 // on the connected network. 1537 // 1538 if ((Gateway != IP4_ALLZERO_ADDRESS) && 1539 ((NetGetIpClass (Gateway) > IP4_ADDR_CLASSC) || 1540 !IP4_NET_EQUAL (Gateway, IpIf->Ip, IpIf->SubnetMask) || 1541 IP4_IS_BROADCAST (Ip4GetNetCast (Gateway, IpIf)))) { 1542 1543 return EFI_INVALID_PARAMETER; 1544 } 1545 } 1546 1547 // 1548 // Check the packet length: Head length and packet length all has a limit 1549 // 1550 HeadLen = sizeof (IP4_HEAD) + ((TxData->OptionsLength + 3) &~0x03); 1551 1552 if ((HeadLen > IP4_MAX_HEADLEN) || 1553 (TxData->TotalDataLength + HeadLen > IP4_MAX_PACKET_SIZE)) { 1554 1555 return EFI_BAD_BUFFER_SIZE; 1556 } 1557 1558 return EFI_SUCCESS; 1559 } 1560 1561 1562 /** 1563 The callback function for the net buffer which wraps the user's 1564 transmit token. Although it seems this function is pretty simple, 1565 there are some subtle things. 1566 When user requests the IP to transmit a packet by passing it a 1567 token, the token is wrapped in an IP4_TXTOKEN_WRAP and the data 1568 is wrapped in an net buffer. the net buffer's Free function is 1569 set to Ip4FreeTxToken. The Token and token wrap are added to the 1570 IP child's TxToken map. Then the buffer is passed to Ip4Output for 1571 transmission. If something error happened before that, the buffer 1572 is freed, which in turn will free the token wrap. The wrap may 1573 have been added to the TxToken map or not, and the user's event 1574 shouldn't be fired because we are still in the EfiIp4Transmit. If 1575 the buffer has been sent by Ip4Output, it should be removed from 1576 the TxToken map and user's event signaled. The token wrap and buffer 1577 are bound together. Check the comments in Ip4Output for information 1578 about IP fragmentation. 1579 1580 @param[in] Context The token's wrap. 1581 1582 **/ 1583 VOID 1584 EFIAPI 1585 Ip4FreeTxToken ( 1586 IN VOID *Context 1587 ) 1588 { 1589 IP4_TXTOKEN_WRAP *Wrap; 1590 NET_MAP_ITEM *Item; 1591 1592 Wrap = (IP4_TXTOKEN_WRAP *) Context; 1593 1594 // 1595 // Signal IpSecRecycleEvent to inform IPsec free the memory 1596 // 1597 if (Wrap->IpSecRecycleSignal != NULL) { 1598 gBS->SignalEvent (Wrap->IpSecRecycleSignal); 1599 } 1600 1601 // 1602 // Find the token in the instance's map. EfiIp4Transmit put the 1603 // token to the map. If that failed, NetMapFindKey will return NULL. 1604 // 1605 Item = NetMapFindKey (&Wrap->IpInstance->TxTokens, Wrap->Token); 1606 1607 if (Item != NULL) { 1608 NetMapRemoveItem (&Wrap->IpInstance->TxTokens, Item, NULL); 1609 } 1610 1611 if (Wrap->Sent) { 1612 gBS->SignalEvent (Wrap->Token->Event); 1613 1614 // 1615 // Dispatch the DPC queued by the NotifyFunction of Token->Event. 1616 // 1617 DispatchDpc (); 1618 } 1619 1620 FreePool (Wrap); 1621 } 1622 1623 1624 /** 1625 The callback function to Ip4Output to update the transmit status. 1626 1627 @param Ip4Instance The Ip4Instance that request the transmit. 1628 @param Packet The user's transmit request. 1629 @param IoStatus The result of the transmission. 1630 @param Flag Not used during transmission. 1631 @param Context The token's wrap. 1632 1633 **/ 1634 VOID 1635 Ip4OnPacketSent ( 1636 IP4_PROTOCOL *Ip4Instance, 1637 NET_BUF *Packet, 1638 EFI_STATUS IoStatus, 1639 UINT32 Flag, 1640 VOID *Context 1641 ) 1642 { 1643 IP4_TXTOKEN_WRAP *Wrap; 1644 1645 // 1646 // This is the transmission request from upper layer, 1647 // not the IP4 driver itself. 1648 // 1649 ASSERT (Ip4Instance != NULL); 1650 1651 // 1652 // The first fragment of the packet has been sent. Update 1653 // the token's status. That is, if fragmented, the transmit's 1654 // status is the first fragment's status. The Wrap will be 1655 // release when all the fragments are release. Check the comments 1656 // in Ip4FreeTxToken and Ip4Output for information. 1657 // 1658 Wrap = (IP4_TXTOKEN_WRAP *) Context; 1659 Wrap->Token->Status = IoStatus; 1660 1661 NetbufFree (Wrap->Packet); 1662 } 1663 1664 1665 /** 1666 Places outgoing data packets into the transmit queue. 1667 1668 The Transmit() function places a sending request in the transmit queue of this 1669 EFI IPv4 Protocol instance. Whenever the packet in the token is sent out or some 1670 errors occur, the event in the token will be signaled and the status is updated. 1671 1672 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 1673 @param[in] Token Pointer to the transmit token. 1674 1675 @retval EFI_SUCCESS The data has been queued for transmission. 1676 @retval EFI_NOT_STARTED This instance has not been started. 1677 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 1678 RARP, etc.) is not finished yet. 1679 @retval EFI_INVALID_PARAMETER One or more pameters are invalid. 1680 @retval EFI_ACCESS_DENIED The transmit completion token with the same Token.Event 1681 was already in the transmit queue. 1682 @retval EFI_NOT_READY The completion token could not be queued because the transmit 1683 queue is full. 1684 @retval EFI_NOT_FOUND Not route is found to destination address. 1685 @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data. 1686 @retval EFI_BUFFER_TOO_SMALL Token.Packet.TxData.TotalDataLength is too 1687 short to transmit. 1688 @retval EFI_BAD_BUFFER_SIZE The length of the IPv4 header + option length + total data length is 1689 greater than MTU (or greater than the maximum packet size if 1690 Token.Packet.TxData.OverrideData. 1691 DoNotFragment is TRUE). 1692 1693 **/ 1694 EFI_STATUS 1695 EFIAPI 1696 EfiIp4Transmit ( 1697 IN EFI_IP4_PROTOCOL *This, 1698 IN EFI_IP4_COMPLETION_TOKEN *Token 1699 ) 1700 { 1701 IP4_SERVICE *IpSb; 1702 IP4_PROTOCOL *IpInstance; 1703 IP4_INTERFACE *IpIf; 1704 IP4_TXTOKEN_WRAP *Wrap; 1705 EFI_IP4_TRANSMIT_DATA *TxData; 1706 EFI_IP4_CONFIG_DATA *Config; 1707 EFI_IP4_OVERRIDE_DATA *Override; 1708 IP4_HEAD Head; 1709 IP4_ADDR GateWay; 1710 EFI_STATUS Status; 1711 EFI_TPL OldTpl; 1712 BOOLEAN DontFragment; 1713 UINT32 HeadLen; 1714 UINT8 RawHdrLen; 1715 UINT32 OptionsLength; 1716 UINT8 *OptionsBuffer; 1717 VOID *FirstFragment; 1718 1719 if (This == NULL) { 1720 return EFI_INVALID_PARAMETER; 1721 } 1722 1723 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 1724 1725 if (IpInstance->State != IP4_STATE_CONFIGED) { 1726 return EFI_NOT_STARTED; 1727 } 1728 1729 OldTpl = gBS->RaiseTPL (TPL_CALLBACK); 1730 1731 IpSb = IpInstance->Service; 1732 IpIf = IpInstance->Interface; 1733 Config = &IpInstance->ConfigData; 1734 1735 if (Config->UseDefaultAddress && IP4_NO_MAPPING (IpInstance)) { 1736 Status = EFI_NO_MAPPING; 1737 goto ON_EXIT; 1738 } 1739 1740 // 1741 // make sure that token is properly formated 1742 // 1743 Status = Ip4TxTokenValid (Token, IpIf, Config->RawData); 1744 1745 if (EFI_ERROR (Status)) { 1746 goto ON_EXIT; 1747 } 1748 1749 // 1750 // Check whether the token or signal already existed. 1751 // 1752 if (EFI_ERROR (NetMapIterate (&IpInstance->TxTokens, Ip4TokenExist, Token))) { 1753 Status = EFI_ACCESS_DENIED; 1754 goto ON_EXIT; 1755 } 1756 1757 // 1758 // Build the IP header, need to fill in the Tos, TotalLen, Id, 1759 // fragment, Ttl, protocol, Src, and Dst. 1760 // 1761 TxData = Token->Packet.TxData; 1762 1763 FirstFragment = NULL; 1764 1765 if (Config->RawData) { 1766 // 1767 // When RawData is TRUE, first buffer in FragmentTable points to a raw 1768 // IPv4 fragment including IPv4 header and options. 1769 // 1770 FirstFragment = TxData->FragmentTable[0].FragmentBuffer; 1771 CopyMem (&RawHdrLen, FirstFragment, sizeof (UINT8)); 1772 1773 RawHdrLen = (UINT8) (RawHdrLen & 0x0f); 1774 if (RawHdrLen < 5) { 1775 Status = EFI_INVALID_PARAMETER; 1776 goto ON_EXIT; 1777 } 1778 1779 RawHdrLen = (UINT8) (RawHdrLen << 2); 1780 1781 CopyMem (&Head, FirstFragment, IP4_MIN_HEADLEN); 1782 1783 Ip4NtohHead (&Head); 1784 HeadLen = 0; 1785 DontFragment = IP4_DO_NOT_FRAGMENT (Head.Fragment); 1786 1787 if (!DontFragment) { 1788 Status = EFI_INVALID_PARAMETER; 1789 goto ON_EXIT; 1790 } 1791 1792 GateWay = IP4_ALLZERO_ADDRESS; 1793 1794 // 1795 // Get IPv4 options from first fragment. 1796 // 1797 if (RawHdrLen == IP4_MIN_HEADLEN) { 1798 OptionsLength = 0; 1799 OptionsBuffer = NULL; 1800 } else { 1801 OptionsLength = RawHdrLen - IP4_MIN_HEADLEN; 1802 OptionsBuffer = (UINT8 *) FirstFragment + IP4_MIN_HEADLEN; 1803 } 1804 1805 // 1806 // Trim off IPv4 header and options from first fragment. 1807 // 1808 TxData->FragmentTable[0].FragmentBuffer = (UINT8 *) FirstFragment + RawHdrLen; 1809 TxData->FragmentTable[0].FragmentLength = TxData->FragmentTable[0].FragmentLength - RawHdrLen; 1810 } else { 1811 CopyMem (&Head.Dst, &TxData->DestinationAddress, sizeof (IP4_ADDR)); 1812 Head.Dst = NTOHL (Head.Dst); 1813 1814 if (TxData->OverrideData != NULL) { 1815 Override = TxData->OverrideData; 1816 Head.Protocol = Override->Protocol; 1817 Head.Tos = Override->TypeOfService; 1818 Head.Ttl = Override->TimeToLive; 1819 DontFragment = Override->DoNotFragment; 1820 1821 CopyMem (&Head.Src, &Override->SourceAddress, sizeof (IP4_ADDR)); 1822 CopyMem (&GateWay, &Override->GatewayAddress, sizeof (IP4_ADDR)); 1823 1824 Head.Src = NTOHL (Head.Src); 1825 GateWay = NTOHL (GateWay); 1826 } else { 1827 Head.Src = IpIf->Ip; 1828 GateWay = IP4_ALLZERO_ADDRESS; 1829 Head.Protocol = Config->DefaultProtocol; 1830 Head.Tos = Config->TypeOfService; 1831 Head.Ttl = Config->TimeToLive; 1832 DontFragment = Config->DoNotFragment; 1833 } 1834 1835 Head.Fragment = IP4_HEAD_FRAGMENT_FIELD (DontFragment, FALSE, 0); 1836 HeadLen = (TxData->OptionsLength + 3) & (~0x03); 1837 1838 OptionsLength = TxData->OptionsLength; 1839 OptionsBuffer = (UINT8 *) (TxData->OptionsBuffer); 1840 } 1841 1842 // 1843 // If don't fragment and fragment needed, return error 1844 // 1845 if (DontFragment && (TxData->TotalDataLength + HeadLen > IpSb->MaxPacketSize)) { 1846 Status = EFI_BAD_BUFFER_SIZE; 1847 goto ON_EXIT; 1848 } 1849 1850 // 1851 // OK, it survives all the validation check. Wrap the token in 1852 // a IP4_TXTOKEN_WRAP and the data in a netbuf 1853 // 1854 Status = EFI_OUT_OF_RESOURCES; 1855 Wrap = AllocateZeroPool (sizeof (IP4_TXTOKEN_WRAP)); 1856 if (Wrap == NULL) { 1857 goto ON_EXIT; 1858 } 1859 1860 Wrap->IpInstance = IpInstance; 1861 Wrap->Token = Token; 1862 Wrap->Sent = FALSE; 1863 Wrap->Life = IP4_US_TO_SEC (Config->TransmitTimeout); 1864 Wrap->Packet = NetbufFromExt ( 1865 (NET_FRAGMENT *) TxData->FragmentTable, 1866 TxData->FragmentCount, 1867 IP4_MAX_HEADLEN, 1868 0, 1869 Ip4FreeTxToken, 1870 Wrap 1871 ); 1872 1873 if (Wrap->Packet == NULL) { 1874 FreePool (Wrap); 1875 goto ON_EXIT; 1876 } 1877 1878 Token->Status = EFI_NOT_READY; 1879 1880 if (EFI_ERROR (NetMapInsertTail (&IpInstance->TxTokens, Token, Wrap))) { 1881 // 1882 // NetbufFree will call Ip4FreeTxToken, which in turn will 1883 // free the IP4_TXTOKEN_WRAP. Now, the token wrap hasn't been 1884 // enqueued. 1885 // 1886 if (Config->RawData) { 1887 // 1888 // Restore pointer of first fragment in RawData mode. 1889 // 1890 TxData->FragmentTable[0].FragmentBuffer = (UINT8 *) FirstFragment; 1891 } 1892 1893 NetbufFree (Wrap->Packet); 1894 goto ON_EXIT; 1895 } 1896 1897 // 1898 // Mark the packet sent before output it. Mark it not sent again if the 1899 // returned status is not EFI_SUCCESS; 1900 // 1901 Wrap->Sent = TRUE; 1902 1903 Status = Ip4Output ( 1904 IpSb, 1905 IpInstance, 1906 Wrap->Packet, 1907 &Head, 1908 OptionsBuffer, 1909 OptionsLength, 1910 GateWay, 1911 Ip4OnPacketSent, 1912 Wrap 1913 ); 1914 1915 if (EFI_ERROR (Status)) { 1916 Wrap->Sent = FALSE; 1917 1918 if (Config->RawData) { 1919 // 1920 // Restore pointer of first fragment in RawData mode. 1921 // 1922 TxData->FragmentTable[0].FragmentBuffer = (UINT8 *) FirstFragment; 1923 } 1924 1925 NetbufFree (Wrap->Packet); 1926 } 1927 1928 if (Config->RawData) { 1929 // 1930 // Restore pointer of first fragment in RawData mode. 1931 // 1932 TxData->FragmentTable[0].FragmentBuffer = (UINT8 *) FirstFragment; 1933 } 1934 1935 ON_EXIT: 1936 gBS->RestoreTPL (OldTpl); 1937 return Status; 1938 } 1939 1940 1941 /** 1942 Places a receiving request into the receiving queue. 1943 1944 The Receive() function places a completion token into the receive packet queue. 1945 This function is always asynchronous. 1946 1947 The Token.Event field in the completion token must be filled in by the caller 1948 and cannot be NULL. When the receive operation completes, the EFI IPv4 Protocol 1949 driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event 1950 is signaled. 1951 1952 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 1953 @param[in] Token Pointer to a token that is associated with the receive data descriptor. 1954 1955 @retval EFI_SUCCESS The receive completion token was cached. 1956 @retval EFI_NOT_STARTED This EFI IPv4 Protocol instance has not been started. 1957 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) 1958 is not finished yet. 1959 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 1960 - This is NULL. 1961 - Token is NULL. 1962 - Token.Event is NULL. 1963 @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system 1964 resources (usually memory). 1965 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 1966 The EFI IPv4 Protocol instance has been reset to startup defaults. 1967 EFI_ACCESS_DENIED The receive completion token with the same Token.Event was already 1968 in the receive queue. 1969 @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full. 1970 @retval EFI_ICMP_ERROR An ICMP error packet was received. 1971 1972 **/ 1973 EFI_STATUS 1974 EFIAPI 1975 EfiIp4Receive ( 1976 IN EFI_IP4_PROTOCOL *This, 1977 IN EFI_IP4_COMPLETION_TOKEN *Token 1978 ) 1979 { 1980 IP4_PROTOCOL *IpInstance; 1981 EFI_STATUS Status; 1982 EFI_TPL OldTpl; 1983 1984 // 1985 // First validate the parameters 1986 // 1987 if ((This == NULL) || (Token == NULL) || (Token->Event == NULL)) { 1988 return EFI_INVALID_PARAMETER; 1989 } 1990 1991 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 1992 1993 OldTpl = gBS->RaiseTPL (TPL_CALLBACK); 1994 1995 if (IpInstance->State != IP4_STATE_CONFIGED) { 1996 Status = EFI_NOT_STARTED; 1997 goto ON_EXIT; 1998 } 1999 2000 // 2001 // Check whether the toke is already on the receive queue. 2002 // 2003 Status = NetMapIterate (&IpInstance->RxTokens, Ip4TokenExist, Token); 2004 2005 if (EFI_ERROR (Status)) { 2006 Status = EFI_ACCESS_DENIED; 2007 goto ON_EXIT; 2008 } 2009 2010 // 2011 // Queue the token then check whether there is pending received packet. 2012 // 2013 Status = NetMapInsertTail (&IpInstance->RxTokens, Token, NULL); 2014 2015 if (EFI_ERROR (Status)) { 2016 goto ON_EXIT; 2017 } 2018 2019 Status = Ip4InstanceDeliverPacket (IpInstance); 2020 2021 // 2022 // Dispatch the DPC queued by the NotifyFunction of this instane's receive 2023 // event. 2024 // 2025 DispatchDpc (); 2026 2027 ON_EXIT: 2028 gBS->RestoreTPL (OldTpl); 2029 return Status; 2030 } 2031 2032 2033 /** 2034 Cancel the transmitted but not recycled packet. If a matching 2035 token is found, it will call Ip4CancelPacket to cancel the 2036 packet. Ip4CancelPacket will cancel all the fragments of the 2037 packet. When all the fragments are freed, the IP4_TXTOKEN_WRAP 2038 will be deleted from the Map, and user's event signalled. 2039 Because Ip4CancelPacket and other functions are all called in 2040 line, so, after Ip4CancelPacket returns, the Item has been freed. 2041 2042 @param[in] Map The IP4 child's transmit queue. 2043 @param[in] Item The current transmitted packet to test. 2044 @param[in] Context The user's token to cancel. 2045 2046 @retval EFI_SUCCESS Continue to check the next Item. 2047 @retval EFI_ABORTED The user's Token (Token != NULL) is cancelled. 2048 2049 **/ 2050 EFI_STATUS 2051 EFIAPI 2052 Ip4CancelTxTokens ( 2053 IN NET_MAP *Map, 2054 IN NET_MAP_ITEM *Item, 2055 IN VOID *Context 2056 ) 2057 { 2058 EFI_IP4_COMPLETION_TOKEN *Token; 2059 IP4_TXTOKEN_WRAP *Wrap; 2060 2061 Token = (EFI_IP4_COMPLETION_TOKEN *) Context; 2062 2063 // 2064 // Return EFI_SUCCESS to check the next item in the map if 2065 // this one doesn't match. 2066 // 2067 if ((Token != NULL) && (Token != Item->Key)) { 2068 return EFI_SUCCESS; 2069 } 2070 2071 Wrap = (IP4_TXTOKEN_WRAP *) Item->Value; 2072 ASSERT (Wrap != NULL); 2073 2074 // 2075 // Don't access the Item, Wrap and Token's members after this point. 2076 // Item and wrap has been freed. And we no longer own the Token. 2077 // 2078 Ip4CancelPacket (Wrap->IpInstance->Interface, Wrap->Packet, EFI_ABORTED); 2079 2080 // 2081 // If only one item is to be cancel, return EFI_ABORTED to stop 2082 // iterating the map any more. 2083 // 2084 if (Token != NULL) { 2085 return EFI_ABORTED; 2086 } 2087 2088 return EFI_SUCCESS; 2089 } 2090 2091 2092 /** 2093 Cancel the receive request. This is quiet simple, because 2094 it is only enqueued in our local receive map. 2095 2096 @param[in] Map The IP4 child's receive queue. 2097 @param[in] Item Current receive request to cancel. 2098 @param[in] Context The user's token to cancel. 2099 2100 @retval EFI_SUCCESS Continue to check the next receive request on the 2101 queue. 2102 @retval EFI_ABORTED The user's token (token != NULL) has been 2103 cancelled. 2104 2105 **/ 2106 EFI_STATUS 2107 EFIAPI 2108 Ip4CancelRxTokens ( 2109 IN NET_MAP *Map, 2110 IN NET_MAP_ITEM *Item, 2111 IN VOID *Context 2112 ) 2113 { 2114 EFI_IP4_COMPLETION_TOKEN *Token; 2115 EFI_IP4_COMPLETION_TOKEN *This; 2116 2117 Token = (EFI_IP4_COMPLETION_TOKEN *) Context; 2118 This = Item->Key; 2119 2120 if ((Token != NULL) && (Token != This)) { 2121 return EFI_SUCCESS; 2122 } 2123 2124 NetMapRemoveItem (Map, Item, NULL); 2125 2126 This->Status = EFI_ABORTED; 2127 This->Packet.RxData = NULL; 2128 gBS->SignalEvent (This->Event); 2129 2130 if (Token != NULL) { 2131 return EFI_ABORTED; 2132 } 2133 2134 return EFI_SUCCESS; 2135 } 2136 2137 2138 /** 2139 Cancel the user's receive/transmit request. 2140 2141 @param[in] IpInstance The IP4 child. 2142 @param[in] Token The token to cancel. If NULL, all token will be 2143 cancelled. 2144 2145 @retval EFI_SUCCESS The token is cancelled. 2146 @retval EFI_NOT_FOUND The token isn't found on either the 2147 transmit/receive queue. 2148 @retval EFI_DEVICE_ERROR Not all token is cancelled when Token is NULL. 2149 2150 **/ 2151 EFI_STATUS 2152 Ip4Cancel ( 2153 IN IP4_PROTOCOL *IpInstance, 2154 IN EFI_IP4_COMPLETION_TOKEN *Token OPTIONAL 2155 ) 2156 { 2157 EFI_STATUS Status; 2158 2159 // 2160 // First check the transmitted packet. Ip4CancelTxTokens returns 2161 // EFI_ABORTED to mean that the token has been cancelled when 2162 // token != NULL. So, return EFI_SUCCESS for this condition. 2163 // 2164 Status = NetMapIterate (&IpInstance->TxTokens, Ip4CancelTxTokens, Token); 2165 2166 if (EFI_ERROR (Status)) { 2167 if ((Token != NULL) && (Status == EFI_ABORTED)) { 2168 return EFI_SUCCESS; 2169 } 2170 2171 return Status; 2172 } 2173 2174 // 2175 // Check the receive queue. Ip4CancelRxTokens also returns EFI_ABORT 2176 // for Token!=NULL and it is cancelled. 2177 // 2178 Status = NetMapIterate (&IpInstance->RxTokens, Ip4CancelRxTokens, Token); 2179 // 2180 // Dispatch the DPCs queued by the NotifyFunction of the canceled rx token's 2181 // events. 2182 // 2183 DispatchDpc (); 2184 if (EFI_ERROR (Status)) { 2185 if ((Token != NULL) && (Status == EFI_ABORTED)) { 2186 return EFI_SUCCESS; 2187 } 2188 2189 return Status; 2190 } 2191 2192 // 2193 // OK, if the Token is found when Token != NULL, the NetMapIterate 2194 // will return EFI_ABORTED, which has been interrupted as EFI_SUCCESS. 2195 // 2196 if (Token != NULL) { 2197 return EFI_NOT_FOUND; 2198 } 2199 2200 // 2201 // If Token == NULL, cancel all the tokens. return error if no 2202 // all of them are cancelled. 2203 // 2204 if (!NetMapIsEmpty (&IpInstance->TxTokens) || 2205 !NetMapIsEmpty (&IpInstance->RxTokens)) { 2206 2207 return EFI_DEVICE_ERROR; 2208 } 2209 2210 return EFI_SUCCESS; 2211 } 2212 2213 2214 /** 2215 Abort an asynchronous transmit or receive request. 2216 2217 The Cancel() function is used to abort a pending transmit or receive request. 2218 If the token is in the transmit or receive request queues, after calling this 2219 function, Token->Status will be set to EFI_ABORTED and then Token->Event will 2220 be signaled. If the token is not in one of the queues, which usually means the 2221 asynchronous operation has completed, this function will not signal the token 2222 and EFI_NOT_FOUND is returned. 2223 2224 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 2225 @param[in] Token Pointer to a token that has been issued by 2226 EFI_IP4_PROTOCOL.Transmit() or 2227 EFI_IP4_PROTOCOL.Receive(). If NULL, all pending 2228 tokens are aborted. Type EFI_IP4_COMPLETION_TOKEN is 2229 defined in EFI_IP4_PROTOCOL.Transmit(). 2230 2231 @retval EFI_SUCCESS The asynchronous I/O request was aborted and 2232 Token.->Event was signaled. When Token is NULL, all 2233 pending requests were aborted and their events were signaled. 2234 @retval EFI_INVALID_PARAMETER This is NULL. 2235 @retval EFI_NOT_STARTED This instance has not been started. 2236 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 2237 RARP, etc.) is not finished yet. 2238 @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was 2239 not found in the transmit or receive queue. It has either completed 2240 or was not issued by Transmit() and Receive(). 2241 2242 **/ 2243 EFI_STATUS 2244 EFIAPI 2245 EfiIp4Cancel ( 2246 IN EFI_IP4_PROTOCOL *This, 2247 IN EFI_IP4_COMPLETION_TOKEN *Token OPTIONAL 2248 ) 2249 { 2250 IP4_PROTOCOL *IpInstance; 2251 EFI_STATUS Status; 2252 EFI_TPL OldTpl; 2253 2254 if (This == NULL) { 2255 return EFI_INVALID_PARAMETER; 2256 } 2257 2258 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 2259 2260 OldTpl = gBS->RaiseTPL (TPL_CALLBACK); 2261 2262 if (IpInstance->State != IP4_STATE_CONFIGED) { 2263 Status = EFI_NOT_STARTED; 2264 goto ON_EXIT; 2265 } 2266 2267 if (IpInstance->ConfigData.UseDefaultAddress && IP4_NO_MAPPING (IpInstance)) { 2268 Status = EFI_NO_MAPPING; 2269 goto ON_EXIT; 2270 } 2271 2272 Status = Ip4Cancel (IpInstance, Token); 2273 2274 ON_EXIT: 2275 gBS->RestoreTPL (OldTpl); 2276 return Status; 2277 } 2278 2279 2280 /** 2281 Polls for incoming data packets and processes outgoing data packets. 2282 2283 The Poll() function polls for incoming data packets and processes outgoing data 2284 packets. Network drivers and applications can call the EFI_IP4_PROTOCOL.Poll() 2285 function to increase the rate that data packets are moved between the communications 2286 device and the transmit and receive queues. 2287 2288 In some systems the periodic timer event may not poll the underlying communications 2289 device fast enough to transmit and/or receive all data packets without missing 2290 incoming packets or dropping outgoing packets. Drivers and applications that are 2291 experiencing packet loss should try calling the EFI_IP4_PROTOCOL.Poll() function 2292 more often. 2293 2294 @param[in] This Pointer to the EFI_IP4_PROTOCOL instance. 2295 2296 @retval EFI_SUCCESS Incoming or outgoing data was processed. 2297 @retval EFI_NOT_STARTED This EFI IPv4 Protocol instance has not been started. 2298 @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, 2299 RARP, etc.) is not finished yet. 2300 @retval EFI_INVALID_PARAMETER This is NULL. 2301 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 2302 @retval EFI_NOT_READY No incoming or outgoing data is processed. 2303 @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. 2304 Consider increasing the polling rate. 2305 2306 **/ 2307 EFI_STATUS 2308 EFIAPI 2309 EfiIp4Poll ( 2310 IN EFI_IP4_PROTOCOL *This 2311 ) 2312 { 2313 IP4_PROTOCOL *IpInstance; 2314 EFI_MANAGED_NETWORK_PROTOCOL *Mnp; 2315 2316 if (This == NULL) { 2317 return EFI_INVALID_PARAMETER; 2318 } 2319 2320 IpInstance = IP4_INSTANCE_FROM_PROTOCOL (This); 2321 2322 if (IpInstance->State == IP4_STATE_UNCONFIGED) { 2323 return EFI_NOT_STARTED; 2324 } 2325 2326 Mnp = IpInstance->Service->Mnp; 2327 2328 // 2329 // Don't lock the Poll function to enable the deliver of 2330 // the packet polled up. 2331 // 2332 return Mnp->Poll (Mnp); 2333 } 2334 2335 /** 2336 Decrease the life of the transmitted packets. If it is 2337 decreased to zero, cancel the packet. This function is 2338 called by Ip4PacketTimerTicking which time out both the 2339 received-but-not-delivered and transmitted-but-not-recycle 2340 packets. 2341 2342 @param[in] Map The IP4 child's transmit map. 2343 @param[in] Item Current transmitted packet. 2344 @param[in] Context Not used. 2345 2346 @retval EFI_SUCCESS Always returns EFI_SUCCESS. 2347 2348 **/ 2349 EFI_STATUS 2350 EFIAPI 2351 Ip4SentPacketTicking ( 2352 IN NET_MAP *Map, 2353 IN NET_MAP_ITEM *Item, 2354 IN VOID *Context 2355 ) 2356 { 2357 IP4_TXTOKEN_WRAP *Wrap; 2358 2359 Wrap = (IP4_TXTOKEN_WRAP *) Item->Value; 2360 ASSERT (Wrap != NULL); 2361 2362 if ((Wrap->Life > 0) && (--Wrap->Life == 0)) { 2363 Ip4CancelPacket (Wrap->IpInstance->Interface, Wrap->Packet, EFI_ABORTED); 2364 } 2365 2366 return EFI_SUCCESS; 2367 } 2368 2369 2370 /** 2371 There are two steps for this the heart beat timer of IP4 service instance. 2372 First, it times out all of its IP4 children's received-but-not-delivered 2373 and transmitted-but-not-recycle packets, and provides time input for its 2374 IGMP protocol. 2375 Second, a dedicated timer is used to poll underlying media status. In case 2376 of cable swap, a new round auto configuration will be initiated. The timer 2377 will signal the IP4 to run DHCP configuration again. IP4 driver will free 2378 old IP address related resource, such as route table and Interface, then 2379 initiate a DHCP process to acquire new IP, eventually create route table 2380 for new IP address. 2381 2382 @param[in] Event The IP4 service instance's heart beat timer. 2383 @param[in] Context The IP4 service instance. 2384 2385 **/ 2386 VOID 2387 EFIAPI 2388 Ip4TimerTicking ( 2389 IN EFI_EVENT Event, 2390 IN VOID *Context 2391 ) 2392 { 2393 IP4_SERVICE *IpSb; 2394 BOOLEAN OldMediaPresent; 2395 EFI_STATUS Status; 2396 EFI_SIMPLE_NETWORK_MODE SnpModeData; 2397 2398 IpSb = (IP4_SERVICE *) Context; 2399 NET_CHECK_SIGNATURE (IpSb, IP4_SERVICE_SIGNATURE); 2400 2401 OldMediaPresent = IpSb->MediaPresent; 2402 2403 Ip4PacketTimerTicking (IpSb); 2404 Ip4IgmpTicking (IpSb); 2405 2406 // 2407 // Get fresh mode data from MNP, since underlying media status may change. 2408 // Here, it needs to mention that the MediaPresent can also be checked even if 2409 // EFI_NOT_STARTED returned while this MNP child driver instance isn't configured. 2410 // 2411 Status = IpSb->Mnp->GetModeData (IpSb->Mnp, NULL, &SnpModeData); 2412 if (EFI_ERROR (Status) && (Status != EFI_NOT_STARTED)) { 2413 return; 2414 } 2415 2416 IpSb->MediaPresent = SnpModeData.MediaPresent; 2417 // 2418 // Media transimit Unpresent to Present means new link movement is detected. 2419 // 2420 if (!OldMediaPresent && IpSb->MediaPresent) { 2421 // 2422 // Signal the IP4 to run the dhcp configuration again. IP4 driver will free 2423 // old IP address related resource, such as route table and Interface, then 2424 // initiate a DHCP round to acquire new IP, eventually 2425 // create route table for new IP address. 2426 // 2427 if (IpSb->ReconfigEvent != NULL) { 2428 Status = gBS->SignalEvent (IpSb->ReconfigEvent); 2429 DispatchDpc (); 2430 } 2431 } 2432 } 2433