1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 #ifndef HCIMSGS_H 20 #define HCIMSGS_H 21 22 #include "bt_target.h" 23 #include "bt_types.h" 24 #include "device/include/esco_parameters.h" 25 #include "hcidefs.h" 26 27 #include <base/callback_forward.h> 28 29 void bte_main_hci_send(BT_HDR* p_msg, uint16_t event); 30 31 /* Message by message.... */ 32 33 extern void btsnd_hcic_inquiry(const LAP inq_lap, uint8_t duration, 34 uint8_t response_cnt); 35 36 #define HCIC_PARAM_SIZE_INQUIRY 5 37 38 #define HCIC_INQ_INQ_LAP_OFF 0 39 #define HCIC_INQ_DUR_OFF 3 40 #define HCIC_INQ_RSP_CNT_OFF 4 41 /* Inquiry */ 42 43 /* Inquiry Cancel */ 44 extern void btsnd_hcic_inq_cancel(void); 45 46 #define HCIC_PARAM_SIZE_INQ_CANCEL 0 47 48 /* Periodic Inquiry Mode */ 49 extern void btsnd_hcic_per_inq_mode(uint16_t max_period, uint16_t min_period, 50 const LAP inq_lap, uint8_t duration, 51 uint8_t response_cnt); 52 53 #define HCIC_PARAM_SIZE_PER_INQ_MODE 9 54 55 #define HCI_PER_INQ_MAX_INTRVL_OFF 0 56 #define HCI_PER_INQ_MIN_INTRVL_OFF 2 57 #define HCI_PER_INQ_INQ_LAP_OFF 4 58 #define HCI_PER_INQ_DURATION_OFF 7 59 #define HCI_PER_INQ_RSP_CNT_OFF 8 60 /* Periodic Inquiry Mode */ 61 62 /* Exit Periodic Inquiry Mode */ 63 extern void btsnd_hcic_exit_per_inq(void); 64 65 #define HCIC_PARAM_SIZE_EXIT_PER_INQ 0 66 /* Create Connection */ 67 extern void btsnd_hcic_create_conn(BD_ADDR dest, uint16_t packet_types, 68 uint8_t page_scan_rep_mode, 69 uint8_t page_scan_mode, 70 uint16_t clock_offset, uint8_t allow_switch); 71 72 #define HCIC_PARAM_SIZE_CREATE_CONN 13 73 74 #define HCIC_CR_CONN_BD_ADDR_OFF 0 75 #define HCIC_CR_CONN_PKT_TYPES_OFF 6 76 #define HCIC_CR_CONN_REP_MODE_OFF 8 77 #define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9 78 #define HCIC_CR_CONN_CLK_OFF_OFF 10 79 #define HCIC_CR_CONN_ALLOW_SWITCH_OFF 12 80 /* Create Connection */ 81 82 /* Disconnect */ 83 extern void btsnd_hcic_disconnect(uint16_t handle, uint8_t reason); 84 85 #define HCIC_PARAM_SIZE_DISCONNECT 3 86 87 #define HCI_DISC_HANDLE_OFF 0 88 #define HCI_DISC_REASON_OFF 2 89 /* Disconnect */ 90 91 #if (BTM_SCO_INCLUDED == TRUE) 92 /* Add SCO Connection */ 93 extern void btsnd_hcic_add_SCO_conn(uint16_t handle, uint16_t packet_types); 94 #endif /* BTM_SCO_INCLUDED */ 95 96 #define HCIC_PARAM_SIZE_ADD_SCO_CONN 4 97 98 #define HCI_ADD_SCO_HANDLE_OFF 0 99 #define HCI_ADD_SCO_PACKET_TYPES_OFF 2 100 /* Add SCO Connection */ 101 102 /* Create Connection Cancel */ 103 extern void btsnd_hcic_create_conn_cancel(BD_ADDR dest); 104 105 #define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL 6 106 107 #define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF 0 108 /* Create Connection Cancel */ 109 110 /* Accept Connection Request */ 111 extern void btsnd_hcic_accept_conn(BD_ADDR bd_addr, uint8_t role); 112 113 #define HCIC_PARAM_SIZE_ACCEPT_CONN 7 114 115 #define HCI_ACC_CONN_BD_ADDR_OFF 0 116 #define HCI_ACC_CONN_ROLE_OFF 6 117 /* Accept Connection Request */ 118 119 /* Reject Connection Request */ 120 extern void btsnd_hcic_reject_conn(BD_ADDR bd_addr, uint8_t reason); 121 122 #define HCIC_PARAM_SIZE_REJECT_CONN 7 123 124 #define HCI_REJ_CONN_BD_ADDR_OFF 0 125 #define HCI_REJ_CONN_REASON_OFF 6 126 /* Reject Connection Request */ 127 128 /* Link Key Request Reply */ 129 extern void btsnd_hcic_link_key_req_reply(BD_ADDR bd_addr, LINK_KEY link_key); 130 131 #define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY 22 132 133 #define HCI_LINK_KEY_REPLY_BD_ADDR_OFF 0 134 #define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6 135 /* Link Key Request Reply */ 136 137 /* Link Key Request Neg Reply */ 138 extern void btsnd_hcic_link_key_neg_reply(BD_ADDR bd_addr); 139 140 #define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY 6 141 142 #define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0 143 /* Link Key Request Neg Reply */ 144 145 /* PIN Code Request Reply */ 146 extern void btsnd_hcic_pin_code_req_reply(BD_ADDR bd_addr, uint8_t pin_code_len, 147 PIN_CODE pin_code); 148 149 #define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY 23 150 151 #define HCI_PIN_CODE_REPLY_BD_ADDR_OFF 0 152 #define HCI_PIN_CODE_REPLY_PIN_LEN_OFF 6 153 #define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7 154 /* PIN Code Request Reply */ 155 156 /* Link Key Request Neg Reply */ 157 extern void btsnd_hcic_pin_code_neg_reply(BD_ADDR bd_addr); 158 159 #define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY 6 160 161 #define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0 162 /* Link Key Request Neg Reply */ 163 164 /* Change Connection Type */ 165 extern void btsnd_hcic_change_conn_type(uint16_t handle, uint16_t packet_types); 166 167 #define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE 4 168 169 #define HCI_CHNG_PKT_TYPE_HANDLE_OFF 0 170 #define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF 2 171 /* Change Connection Type */ 172 173 #define HCIC_PARAM_SIZE_CMD_HANDLE 2 174 175 #define HCI_CMD_HANDLE_HANDLE_OFF 0 176 177 extern void btsnd_hcic_auth_request( 178 uint16_t handle); /* Authentication Request */ 179 180 /* Set Connection Encryption */ 181 extern void btsnd_hcic_set_conn_encrypt(uint16_t handle, bool enable); 182 #define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT 3 183 184 #define HCI_SET_ENCRYPT_HANDLE_OFF 0 185 #define HCI_SET_ENCRYPT_ENABLE_OFF 2 186 /* Set Connection Encryption */ 187 188 /* Remote Name Request */ 189 extern void btsnd_hcic_rmt_name_req(BD_ADDR bd_addr, uint8_t page_scan_rep_mode, 190 uint8_t page_scan_mode, 191 uint16_t clock_offset); 192 193 #define HCIC_PARAM_SIZE_RMT_NAME_REQ 10 194 195 #define HCI_RMT_NAME_BD_ADDR_OFF 0 196 #define HCI_RMT_NAME_REP_MODE_OFF 6 197 #define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7 198 #define HCI_RMT_NAME_CLK_OFF_OFF 8 199 /* Remote Name Request */ 200 201 /* Remote Name Request Cancel */ 202 extern void btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr); 203 204 #define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL 6 205 206 #define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF 0 207 /* Remote Name Request Cancel */ 208 209 extern void btsnd_hcic_rmt_features_req( 210 uint16_t handle); /* Remote Features Request */ 211 212 /* Remote Extended Features */ 213 extern void btsnd_hcic_rmt_ext_features(uint16_t handle, uint8_t page_num); 214 215 #define HCIC_PARAM_SIZE_RMT_EXT_FEATURES 3 216 217 #define HCI_RMT_EXT_FEATURES_HANDLE_OFF 0 218 #define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF 2 219 /* Remote Extended Features */ 220 221 extern void btsnd_hcic_rmt_ver_req( 222 uint16_t handle); /* Remote Version Info Request */ 223 extern void btsnd_hcic_read_rmt_clk_offset( 224 uint16_t handle); /* Remote Clock Offset */ 225 extern void btsnd_hcic_read_lmp_handle(uint16_t handle); /* Remote LMP Handle */ 226 extern void btsnd_hcic_setup_esco_conn(uint16_t handle, 227 uint32_t transmit_bandwidth, 228 uint32_t receive_bandwidth, 229 uint16_t max_latency, uint16_t voice, 230 uint8_t retrans_effort, 231 uint16_t packet_types); 232 #define HCIC_PARAM_SIZE_SETUP_ESCO 17 233 234 #define HCI_SETUP_ESCO_HANDLE_OFF 0 235 #define HCI_SETUP_ESCO_TX_BW_OFF 2 236 #define HCI_SETUP_ESCO_RX_BW_OFF 6 237 #define HCI_SETUP_ESCO_MAX_LAT_OFF 10 238 #define HCI_SETUP_ESCO_VOICE_OFF 12 239 #define HCI_SETUP_ESCO_RETRAN_EFF_OFF 14 240 #define HCI_SETUP_ESCO_PKT_TYPES_OFF 15 241 242 extern void btsnd_hcic_accept_esco_conn( 243 BD_ADDR bd_addr, uint32_t transmit_bandwidth, uint32_t receive_bandwidth, 244 uint16_t max_latency, uint16_t content_fmt, uint8_t retrans_effort, 245 uint16_t packet_types); 246 #define HCIC_PARAM_SIZE_ACCEPT_ESCO 21 247 248 #define HCI_ACCEPT_ESCO_BDADDR_OFF 0 249 #define HCI_ACCEPT_ESCO_TX_BW_OFF 6 250 #define HCI_ACCEPT_ESCO_RX_BW_OFF 10 251 #define HCI_ACCEPT_ESCO_MAX_LAT_OFF 14 252 #define HCI_ACCEPT_ESCO_VOICE_OFF 16 253 #define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF 18 254 #define HCI_ACCEPT_ESCO_PKT_TYPES_OFF 19 255 256 extern void btsnd_hcic_reject_esco_conn(BD_ADDR bd_addr, uint8_t reason); 257 #define HCIC_PARAM_SIZE_REJECT_ESCO 7 258 259 #define HCI_REJECT_ESCO_BDADDR_OFF 0 260 #define HCI_REJECT_ESCO_REASON_OFF 6 261 262 /* Hold Mode */ 263 extern void btsnd_hcic_hold_mode(uint16_t handle, uint16_t max_hold_period, 264 uint16_t min_hold_period); 265 266 #define HCIC_PARAM_SIZE_HOLD_MODE 6 267 268 #define HCI_HOLD_MODE_HANDLE_OFF 0 269 #define HCI_HOLD_MODE_MAX_PER_OFF 2 270 #define HCI_HOLD_MODE_MIN_PER_OFF 4 271 /* Hold Mode */ 272 273 /* Sniff Mode */ 274 extern void btsnd_hcic_sniff_mode(uint16_t handle, uint16_t max_sniff_period, 275 uint16_t min_sniff_period, 276 uint16_t sniff_attempt, 277 uint16_t sniff_timeout); 278 279 #define HCIC_PARAM_SIZE_SNIFF_MODE 10 280 281 #define HCI_SNIFF_MODE_HANDLE_OFF 0 282 #define HCI_SNIFF_MODE_MAX_PER_OFF 2 283 #define HCI_SNIFF_MODE_MIN_PER_OFF 4 284 #define HCI_SNIFF_MODE_ATTEMPT_OFF 6 285 #define HCI_SNIFF_MODE_TIMEOUT_OFF 8 286 /* Sniff Mode */ 287 288 extern void btsnd_hcic_exit_sniff_mode(uint16_t handle); /* Exit Sniff Mode */ 289 290 /* Park Mode */ 291 extern void btsnd_hcic_park_mode(uint16_t handle, uint16_t beacon_max_interval, 292 uint16_t beacon_min_interval); 293 294 #define HCIC_PARAM_SIZE_PARK_MODE 6 295 296 #define HCI_PARK_MODE_HANDLE_OFF 0 297 #define HCI_PARK_MODE_MAX_PER_OFF 2 298 #define HCI_PARK_MODE_MIN_PER_OFF 4 299 /* Park Mode */ 300 301 extern void btsnd_hcic_exit_park_mode(uint16_t handle); /* Exit Park Mode */ 302 303 /* QoS Setup */ 304 extern void btsnd_hcic_qos_setup(uint16_t handle, uint8_t flags, 305 uint8_t service_type, uint32_t token_rate, 306 uint32_t peak, uint32_t latency, 307 uint32_t delay_var); 308 309 #define HCIC_PARAM_SIZE_QOS_SETUP 20 310 311 #define HCI_QOS_HANDLE_OFF 0 312 #define HCI_QOS_FLAGS_OFF 2 313 #define HCI_QOS_SERVICE_TYPE_OFF 3 314 #define HCI_QOS_TOKEN_RATE_OFF 4 315 #define HCI_QOS_PEAK_BANDWIDTH_OFF 8 316 #define HCI_QOS_LATENCY_OFF 12 317 #define HCI_QOS_DELAY_VAR_OFF 16 318 /* QoS Setup */ 319 320 /* Switch Role Request */ 321 extern void btsnd_hcic_switch_role(BD_ADDR bd_addr, uint8_t role); 322 323 #define HCIC_PARAM_SIZE_SWITCH_ROLE 7 324 325 #define HCI_SWITCH_BD_ADDR_OFF 0 326 #define HCI_SWITCH_ROLE_OFF 6 327 /* Switch Role Request */ 328 329 /* Write Policy Settings */ 330 extern void btsnd_hcic_write_policy_set(uint16_t handle, uint16_t settings); 331 332 #define HCIC_PARAM_SIZE_WRITE_POLICY_SET 4 333 334 #define HCI_WRITE_POLICY_HANDLE_OFF 0 335 #define HCI_WRITE_POLICY_SETTINGS_OFF 2 336 /* Write Policy Settings */ 337 338 /* Write Default Policy Settings */ 339 extern void btsnd_hcic_write_def_policy_set(uint16_t settings); 340 341 #define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET 2 342 343 #define HCI_WRITE_DEF_POLICY_SETTINGS_OFF 0 344 /* Write Default Policy Settings */ 345 346 /****************************************** 347 * Lisbon Features 348 ******************************************/ 349 #if (BTM_SSR_INCLUDED == TRUE) 350 /* Sniff Subrating */ 351 extern void btsnd_hcic_sniff_sub_rate(uint16_t handle, uint16_t max_lat, 352 uint16_t min_remote_lat, 353 uint16_t min_local_lat); 354 355 #define HCIC_PARAM_SIZE_SNIFF_SUB_RATE 8 356 357 #define HCI_SNIFF_SUB_RATE_HANDLE_OFF 0 358 #define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF 2 359 #define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF 4 360 #define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF 6 361 /* Sniff Subrating */ 362 363 #else /* BTM_SSR_INCLUDED == FALSE */ 364 365 #define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, \ 366 min_local_lat) \ 367 false 368 369 #endif /* BTM_SSR_INCLUDED */ 370 371 /* Extended Inquiry Response */ 372 extern void btsnd_hcic_write_ext_inquiry_response(void* buffer, 373 uint8_t fec_req); 374 375 #define HCIC_PARAM_SIZE_EXT_INQ_RESP 241 376 377 #define HCIC_EXT_INQ_RESP_FEC_OFF 0 378 #define HCIC_EXT_INQ_RESP_RESPONSE 1 379 /* IO Capabilities Response */ 380 extern void btsnd_hcic_io_cap_req_reply(BD_ADDR bd_addr, uint8_t capability, 381 uint8_t oob_present, uint8_t auth_req); 382 383 #define HCIC_PARAM_SIZE_IO_CAP_RESP 9 384 385 #define HCI_IO_CAP_BD_ADDR_OFF 0 386 #define HCI_IO_CAPABILITY_OFF 6 387 #define HCI_IO_CAP_OOB_DATA_OFF 7 388 #define HCI_IO_CAP_AUTH_REQ_OFF 8 389 390 /* IO Capabilities Req Neg Reply */ 391 extern void btsnd_hcic_io_cap_req_neg_reply(BD_ADDR bd_addr, uint8_t err_code); 392 393 #define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7 394 395 #define HCI_IO_CAP_NR_BD_ADDR_OFF 0 396 #define HCI_IO_CAP_NR_ERR_CODE 6 397 398 /* Read Local OOB Data */ 399 extern void btsnd_hcic_read_local_oob_data(void); 400 401 #define HCIC_PARAM_SIZE_R_LOCAL_OOB 0 402 403 extern void btsnd_hcic_user_conf_reply(BD_ADDR bd_addr, bool is_yes); 404 405 #define HCIC_PARAM_SIZE_UCONF_REPLY 6 406 407 #define HCI_USER_CONF_BD_ADDR_OFF 0 408 409 extern void btsnd_hcic_user_passkey_reply(BD_ADDR bd_addr, uint32_t value); 410 411 #define HCIC_PARAM_SIZE_U_PKEY_REPLY 10 412 413 #define HCI_USER_PASSKEY_BD_ADDR_OFF 0 414 #define HCI_USER_PASSKEY_VALUE_OFF 6 415 416 extern void btsnd_hcic_user_passkey_neg_reply(BD_ADDR bd_addr); 417 418 #define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6 419 420 #define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0 421 422 /* Remote OOB Data Request Reply */ 423 extern void btsnd_hcic_rem_oob_reply(BD_ADDR bd_addr, uint8_t* p_c, 424 uint8_t* p_r); 425 426 #define HCIC_PARAM_SIZE_REM_OOB_REPLY 38 427 428 #define HCI_REM_OOB_DATA_BD_ADDR_OFF 0 429 #define HCI_REM_OOB_DATA_C_OFF 6 430 #define HCI_REM_OOB_DATA_R_OFF 22 431 432 /* Remote OOB Data Request Negative Reply */ 433 extern void btsnd_hcic_rem_oob_neg_reply(BD_ADDR bd_addr); 434 435 #define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY 6 436 437 #define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF 0 438 439 /* Read Tx Power Level */ 440 extern void btsnd_hcic_read_inq_tx_power(void); 441 442 #define HCIC_PARAM_SIZE_R_TX_POWER 0 443 444 /* Read Default Erroneous Data Reporting */ 445 extern void btsnd_hcic_read_default_erroneous_data_rpt(void); 446 447 #define HCIC_PARAM_SIZE_R_ERR_DATA_RPT 0 448 449 #if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE) 450 extern void btsnd_hcic_enhanced_flush(uint16_t handle, uint8_t packet_type); 451 452 #define HCIC_PARAM_SIZE_ENHANCED_FLUSH 3 453 #endif 454 455 extern void btsnd_hcic_send_keypress_notif(BD_ADDR bd_addr, uint8_t notif); 456 457 #define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF 7 458 459 #define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF 0 460 #define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF 6 461 462 /**** end of Simple Pairing Commands ****/ 463 464 /* Store Current Settings */ 465 #define MAX_FILT_COND (sizeof(BD_ADDR) + 1) 466 467 extern void btsnd_hcic_set_event_filter(uint8_t filt_type, 468 uint8_t filt_cond_type, 469 uint8_t* filt_cond, 470 uint8_t filt_cond_len); 471 472 #define HCIC_PARAM_SIZE_SET_EVT_FILTER 9 473 474 #define HCI_FILT_COND_FILT_TYPE_OFF 0 475 #define HCI_FILT_COND_COND_TYPE_OFF 1 476 #define HCI_FILT_COND_FILT_OFF 2 477 /* Set Event Filter */ 478 479 /* Delete Stored Key */ 480 extern void btsnd_hcic_delete_stored_key(BD_ADDR bd_addr, bool delete_all_flag); 481 482 #define HCIC_PARAM_SIZE_DELETE_STORED_KEY 7 483 484 #define HCI_DELETE_KEY_BD_ADDR_OFF 0 485 #define HCI_DELETE_KEY_ALL_FLAG_OFF 6 486 /* Delete Stored Key */ 487 488 /* Change Local Name */ 489 extern void btsnd_hcic_change_name(BD_NAME name); 490 491 #define HCIC_PARAM_SIZE_CHANGE_NAME BD_NAME_LEN 492 493 #define HCI_CHANGE_NAME_NAME_OFF 0 494 /* Change Local Name */ 495 496 #define HCIC_PARAM_SIZE_READ_CMD 0 497 498 #define HCIC_PARAM_SIZE_WRITE_PARAM1 1 499 500 #define HCIC_WRITE_PARAM1_PARAM_OFF 0 501 502 #define HCIC_PARAM_SIZE_WRITE_PARAM2 2 503 504 #define HCIC_WRITE_PARAM2_PARAM_OFF 0 505 506 #define HCIC_PARAM_SIZE_WRITE_PARAM3 3 507 508 #define HCIC_WRITE_PARAM3_PARAM_OFF 0 509 510 #define HCIC_PARAM_SIZE_SET_AFH_CHANNELS 10 511 512 extern void btsnd_hcic_write_pin_type(uint8_t type); /* Write PIN Type */ 513 extern void btsnd_hcic_write_auto_accept(uint8_t flag); /* Write Auto Accept */ 514 extern void btsnd_hcic_read_name(void); /* Read Local Name */ 515 extern void btsnd_hcic_write_page_tout( 516 uint16_t timeout); /* Write Page Timout */ 517 extern void btsnd_hcic_write_scan_enable(uint8_t flag); /* Write Scan Enable */ 518 extern void btsnd_hcic_write_pagescan_cfg( 519 uint16_t interval, uint16_t window); /* Write Page Scan Activity */ 520 521 #define HCIC_PARAM_SIZE_ENH_SET_ESCO_CONN 59 522 #define HCIC_PARAM_SIZE_ENH_ACC_ESCO_CONN 63 523 524 #define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG 4 525 526 #define HCI_SCAN_CFG_INTERVAL_OFF 0 527 #define HCI_SCAN_CFG_WINDOW_OFF 2 528 /* Write Page Scan Activity */ 529 530 /* Write Inquiry Scan Activity */ 531 extern void btsnd_hcic_write_inqscan_cfg(uint16_t interval, uint16_t window); 532 533 #define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG 4 534 535 #define HCI_SCAN_CFG_INTERVAL_OFF 0 536 #define HCI_SCAN_CFG_WINDOW_OFF 2 537 /* Write Inquiry Scan Activity */ 538 539 extern void btsnd_hcic_write_auth_enable( 540 uint8_t flag); /* Write Authentication Enable */ 541 extern void btsnd_hcic_write_dev_class( 542 DEV_CLASS dev); /* Write Class of Device */ 543 extern void btsnd_hcic_write_voice_settings( 544 uint16_t flags); /* Write Voice Settings */ 545 546 /* Host Controller to Host flow control */ 547 #define HCI_HOST_FLOW_CTRL_OFF 0 548 #define HCI_HOST_FLOW_CTRL_ACL_ON 1 549 #define HCI_HOST_FLOW_CTRL_SCO_ON 2 550 #define HCI_HOST_FLOW_CTRL_BOTH_ON 3 551 552 extern void btsnd_hcic_write_auto_flush_tout( 553 uint16_t handle, uint16_t timeout); /* Write Retransmit Timout */ 554 555 #define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT 4 556 557 #define HCI_FLUSH_TOUT_HANDLE_OFF 0 558 #define HCI_FLUSH_TOUT_TOUT_OFF 2 559 560 extern void btsnd_hcic_read_tx_power(uint16_t handle, 561 uint8_t type); /* Read Tx Power */ 562 563 #define HCIC_PARAM_SIZE_READ_TX_POWER 3 564 565 #define HCI_READ_TX_POWER_HANDLE_OFF 0 566 #define HCI_READ_TX_POWER_TYPE_OFF 2 567 568 /* Read transmit power level parameter */ 569 #define HCI_READ_CURRENT 0x00 570 #define HCI_READ_MAXIMUM 0x01 571 572 extern void btsnd_hcic_host_num_xmitted_pkts( 573 uint8_t num_handles, uint16_t* handle, 574 uint16_t* num_pkts); /* Set Host Buffer Size */ 575 576 #define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE sizeof(btmsg_hcic_num_pkts_done_t) 577 578 #define MAX_DATA_HANDLES 10 579 580 #define HCI_PKTS_DONE_NUM_HANDLES_OFF 0 581 #define HCI_PKTS_DONE_HANDLE_OFF 1 582 #define HCI_PKTS_DONE_NUM_PKTS_OFF 3 583 584 /* Write Link Supervision Timeout */ 585 extern void btsnd_hcic_write_link_super_tout(uint8_t local_controller_id, 586 uint16_t handle, uint16_t timeout); 587 588 #define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT 4 589 590 #define HCI_LINK_SUPER_TOUT_HANDLE_OFF 0 591 #define HCI_LINK_SUPER_TOUT_TOUT_OFF 2 592 /* Write Link Supervision Timeout */ 593 594 extern void btsnd_hcic_write_cur_iac_lap( 595 uint8_t num_cur_iac, LAP* const iac_lap); /* Write Current IAC LAP */ 596 597 #define MAX_IAC_LAPS 0x40 598 599 #define HCI_WRITE_IAC_LAP_NUM_OFF 0 600 #define HCI_WRITE_IAC_LAP_LAP_OFF 1 601 /* Write Current IAC LAP */ 602 603 extern void btsnd_hcic_get_link_quality(uint16_t handle); /* Get Link Quality */ 604 extern void btsnd_hcic_read_rssi(uint16_t handle); /* Read RSSI */ 605 extern void btsnd_hcic_enable_test_mode( 606 void); /* Enable Device Under Test Mode */ 607 extern void btsnd_hcic_write_pagescan_type( 608 uint8_t type); /* Write Page Scan Type */ 609 extern void btsnd_hcic_write_inqscan_type( 610 uint8_t type); /* Write Inquiry Scan Type */ 611 extern void btsnd_hcic_write_inquiry_mode( 612 uint8_t type); /* Write Inquiry Mode */ 613 614 /* Enhanced setup SCO connection (CSA2) */ 615 extern void btsnd_hcic_enhanced_set_up_synchronous_connection( 616 uint16_t conn_handle, enh_esco_params_t* p_parms); 617 618 /* Enhanced accept SCO connection request (CSA2) */ 619 extern void btsnd_hcic_enhanced_accept_synchronous_connection( 620 BD_ADDR bd_addr, enh_esco_params_t* p_parms); 621 622 #define HCI_DATA_HANDLE_MASK 0x0FFF 623 624 #define HCID_GET_HANDLE_EVENT(p) \ 625 (uint16_t)((*((uint8_t*)((p) + 1) + (p)->offset) + \ 626 (*((uint8_t*)((p) + 1) + (p)->offset + 1) << 8))) 627 628 #define HCID_GET_HANDLE(u16) (uint16_t)((u16)&HCI_DATA_HANDLE_MASK) 629 630 #define HCI_DATA_EVENT_MASK 3 631 #define HCI_DATA_EVENT_OFFSET 12 632 #define HCID_GET_EVENT(u16) \ 633 (uint8_t)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK) 634 635 #define HCI_DATA_BCAST_MASK 3 636 #define HCI_DATA_BCAST_OFFSET 10 637 #define HCID_GET_BCAST(u16) \ 638 (uint8_t)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK) 639 640 #define HCID_GET_ACL_LEN(p) \ 641 (uint16_t)((*((uint8_t*)((p) + 1) + (p)->offset + 2) + \ 642 (*((uint8_t*)((p) + 1) + (p)->offset + 3) << 8))) 643 644 #define HCID_HEADER_SIZE 4 645 646 #define HCID_GET_SCO_LEN(p) (*((uint8_t*)((p) + 1) + (p)->offset + 2)) 647 648 extern void btsnd_hcic_vendor_spec_cmd(void* buffer, uint16_t opcode, 649 uint8_t len, uint8_t* p_data, 650 void* p_cmd_cplt_cback); 651 652 /******************************************************************************* 653 * BLE Commands 654 * Note: "local_controller_id" is for transport, not counted in HCI 655 * message size 656 ******************************************************************************/ 657 #define HCIC_BLE_RAND_DI_SIZE 8 658 #define HCIC_BLE_ENCRYT_KEY_SIZE 16 659 #define HCIC_BLE_IRK_SIZE 16 660 661 #define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD 8 662 #define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD 6 663 #define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS 15 664 #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP 31 665 #define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE 1 666 #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM 7 667 #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE 2 668 #define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN 25 669 #define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL 0 670 #define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST 0 671 #define HCIC_PARAM_SIZE_ADD_WHITE_LIST 7 672 #define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST 7 673 #define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS 14 674 #define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS 5 675 #define HCIC_PARAM_SIZE_READ_CHNL_MAP 2 676 #define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT 2 677 #define HCIC_PARAM_SIZE_BLE_ENCRYPT 32 678 #define HCIC_PARAM_SIZE_WRITE_LE_HOST_SUPPORTED 2 679 680 #define HCIC_BLE_RAND_DI_SIZE 8 681 #define HCIC_BLE_ENCRYT_KEY_SIZE 16 682 #define HCIC_PARAM_SIZE_BLE_START_ENC \ 683 (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE) 684 #define HCIC_PARAM_SIZE_LTK_REQ_REPLY (2 + HCIC_BLE_ENCRYT_KEY_SIZE) 685 #define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY 2 686 #define HCIC_BLE_CHNL_MAP_SIZE 5 687 #define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA 31 688 689 #define HCIC_PARAM_SIZE_BLE_ADD_DEV_RESOLVING_LIST (7 + HCIC_BLE_IRK_SIZE * 2) 690 #define HCIC_PARAM_SIZE_BLE_RM_DEV_RESOLVING_LIST 7 691 #define HCIC_PARAM_SIZE_BLE_SET_PRIVACY_MODE 8 692 #define HCIC_PARAM_SIZE_BLE_CLEAR_RESOLVING_LIST 0 693 #define HCIC_PARAM_SIZE_BLE_READ_RESOLVING_LIST_SIZE 0 694 #define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_PEER 7 695 #define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_LOCAL 7 696 #define HCIC_PARAM_SIZE_BLE_SET_ADDR_RESOLUTION_ENABLE 1 697 #define HCIC_PARAM_SIZE_BLE_SET_RAND_PRIV_ADDR_TIMOUT 2 698 #define HCIC_PARAM_SIZE_BLE_SET_DATA_LENGTH 6 699 #define HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM 11 700 701 /* ULP HCI command */ 702 extern void btsnd_hcic_ble_set_evt_mask(BT_EVENT_MASK event_mask); 703 704 extern void btsnd_hcic_ble_read_buffer_size(void); 705 706 extern void btsnd_hcic_ble_read_local_spt_feat(void); 707 708 extern void btsnd_hcic_ble_set_local_used_feat(uint8_t feat_set[8]); 709 710 extern void btsnd_hcic_ble_set_random_addr(BD_ADDR random_addr); 711 712 extern void btsnd_hcic_ble_write_adv_params( 713 uint16_t adv_int_min, uint16_t adv_int_max, uint8_t adv_type, 714 uint8_t addr_type_own, uint8_t addr_type_dir, BD_ADDR direct_bda, 715 uint8_t channel_map, uint8_t adv_filter_policy); 716 717 extern void btsnd_hcic_ble_read_adv_chnl_tx_power(void); 718 719 extern void btsnd_hcic_ble_set_adv_data(uint8_t data_len, uint8_t* p_data); 720 721 extern void btsnd_hcic_ble_set_scan_rsp_data(uint8_t data_len, 722 uint8_t* p_scan_rsp); 723 724 extern void btsnd_hcic_ble_set_adv_enable(uint8_t adv_enable); 725 726 extern void btsnd_hcic_ble_set_scan_params(uint8_t scan_type, uint16_t scan_int, 727 uint16_t scan_win, uint8_t addr_type, 728 uint8_t scan_filter_policy); 729 730 extern void btsnd_hcic_ble_set_scan_enable(uint8_t scan_enable, 731 uint8_t duplicate); 732 733 extern void btsnd_hcic_ble_create_ll_conn( 734 uint16_t scan_int, uint16_t scan_win, uint8_t init_filter_policy, 735 uint8_t addr_type_peer, BD_ADDR bda_peer, uint8_t addr_type_own, 736 uint16_t conn_int_min, uint16_t conn_int_max, uint16_t conn_latency, 737 uint16_t conn_timeout, uint16_t min_ce_len, uint16_t max_ce_len); 738 739 extern void btsnd_hcic_ble_create_conn_cancel(void); 740 741 extern void btsnd_hcic_ble_read_white_list_size(void); 742 743 extern void btsnd_hcic_ble_clear_white_list(void); 744 745 extern void btsnd_hcic_ble_add_white_list(uint8_t addr_type, BD_ADDR bda); 746 747 extern void btsnd_hcic_ble_remove_from_white_list(uint8_t addr_type, 748 BD_ADDR bda); 749 750 extern void btsnd_hcic_ble_upd_ll_conn_params( 751 uint16_t handle, uint16_t conn_int_min, uint16_t conn_int_max, 752 uint16_t conn_latency, uint16_t conn_timeout, uint16_t min_len, 753 uint16_t max_len); 754 755 extern void btsnd_hcic_ble_set_host_chnl_class( 756 uint8_t chnl_map[HCIC_BLE_CHNL_MAP_SIZE]); 757 758 extern void btsnd_hcic_ble_read_chnl_map(uint16_t handle); 759 760 extern void btsnd_hcic_ble_read_remote_feat(uint16_t handle); 761 762 extern void btsnd_hcic_ble_encrypt(uint8_t* key, uint8_t key_len, 763 uint8_t* plain_text, uint8_t pt_len, 764 void* p_cmd_cplt_cback); 765 766 extern void btsnd_hcic_ble_rand(base::Callback<void(BT_OCTET8)> cb); 767 768 extern void btsnd_hcic_ble_start_enc(uint16_t handle, 769 uint8_t rand[HCIC_BLE_RAND_DI_SIZE], 770 uint16_t ediv, 771 uint8_t ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); 772 773 extern void btsnd_hcic_ble_ltk_req_reply(uint16_t handle, 774 uint8_t ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); 775 776 extern void btsnd_hcic_ble_ltk_req_neg_reply(uint16_t handle); 777 778 extern void btsnd_hcic_ble_read_supported_states(void); 779 780 extern void btsnd_hcic_ble_write_host_supported(uint8_t le_host_spt, 781 uint8_t simul_le_host_spt); 782 783 extern void btsnd_hcic_ble_read_host_supported(void); 784 785 extern void btsnd_hcic_ble_receiver_test(uint8_t rx_freq); 786 787 extern void btsnd_hcic_ble_transmitter_test(uint8_t tx_freq, 788 uint8_t test_data_len, 789 uint8_t payload); 790 extern void btsnd_hcic_ble_test_end(void); 791 792 #if (BLE_LLT_INCLUDED == TRUE) 793 794 #define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_REPLY 14 795 extern void btsnd_hcic_ble_rc_param_req_reply( 796 uint16_t handle, uint16_t conn_int_min, uint16_t conn_int_max, 797 uint16_t conn_latency, uint16_t conn_timeout, uint16_t min_ce_len, 798 uint16_t max_ce_len); 799 800 #define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_NEG_REPLY 3 801 extern void btsnd_hcic_ble_rc_param_req_neg_reply(uint16_t handle, 802 uint8_t reason); 803 804 #endif /* BLE_LLT_INCLUDED */ 805 806 extern void btsnd_hcic_ble_set_data_length(uint16_t conn_handle, 807 uint16_t tx_octets, 808 uint16_t tx_time); 809 810 extern void btsnd_hcic_ble_add_device_resolving_list( 811 uint8_t addr_type_peer, BD_ADDR bda_peer, 812 uint8_t irk_peer[HCIC_BLE_IRK_SIZE], uint8_t irk_local[HCIC_BLE_IRK_SIZE]); 813 814 struct scanning_phy_cfg { 815 uint8_t scan_type; 816 uint16_t scan_int; 817 uint16_t scan_win; 818 }; 819 820 extern void btsnd_hcic_ble_set_extended_scan_params( 821 uint8_t own_address_type, uint8_t scanning_filter_policy, 822 uint8_t scanning_phys, scanning_phy_cfg* phy_cfg); 823 824 extern void btsnd_hcic_ble_set_extended_scan_enable(uint8_t enable, 825 uint8_t filter_duplicates, 826 uint16_t duration, 827 uint16_t period); 828 829 struct EXT_CONN_PHY_CFG { 830 uint16_t scan_int; 831 uint16_t scan_win; 832 uint16_t conn_int_min; 833 uint16_t conn_int_max; 834 uint16_t conn_latency; 835 uint16_t sup_timeout; 836 uint16_t min_ce_len; 837 uint16_t max_ce_len; 838 }; 839 840 extern void btsnd_hcic_ble_ext_create_conn( 841 uint8_t init_filter_policy, uint8_t addr_type_own, uint8_t addr_type_peer, 842 BD_ADDR bda_peer, uint8_t initiating_phys, EXT_CONN_PHY_CFG* phy_cfg); 843 844 extern void btsnd_hcic_ble_add_device_resolving_list( 845 uint8_t addr_type_peer, BD_ADDR bda_peer, 846 uint8_t irk_peer[HCIC_BLE_IRK_SIZE], uint8_t irk_local[HCIC_BLE_IRK_SIZE]); 847 848 extern void btsnd_hcic_ble_rm_device_resolving_list(uint8_t addr_type_peer, 849 BD_ADDR bda_peer); 850 851 extern void btsnd_hcic_ble_set_privacy_mode(uint8_t addr_type_peer, 852 BD_ADDR bda_peer, 853 uint8_t privacy_type); 854 855 extern void btsnd_hcic_ble_clear_resolving_list(void); 856 857 extern void btsnd_hcic_ble_read_resolvable_addr_peer(uint8_t addr_type_peer, 858 BD_ADDR bda_peer); 859 860 extern void btsnd_hcic_ble_read_resolvable_addr_local(uint8_t addr_type_peer, 861 BD_ADDR bda_peer); 862 863 extern void btsnd_hcic_ble_set_addr_resolution_enable( 864 uint8_t addr_resolution_enable); 865 866 extern void btsnd_hcic_ble_set_rand_priv_addr_timeout(uint16_t rpa_timout); 867 868 extern void btsnd_hcic_read_authenticated_payload_tout(uint16_t handle); 869 870 extern void btsnd_hcic_write_authenticated_payload_tout(uint16_t handle, 871 uint16_t timeout); 872 873 #define HCIC_PARAM_SIZE_WRITE_AUTHENT_PAYLOAD_TOUT 4 874 875 #define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_HANDLE_OFF 0 876 #define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_TOUT_OFF 2 877 878 #endif 879
