1 /* 2 * cec - HDMI Consumer Electronics Control public header 3 * 4 * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. 5 * 6 * This program is free software; you may redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; version 2 of the License. 9 * 10 * Alternatively you can redistribute this file under the terms of the 11 * BSD license as stated below: 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions 15 * are met: 16 * 1. Redistributions of source code must retain the above copyright 17 * notice, this list of conditions and the following disclaimer. 18 * 2. Redistributions in binary form must reproduce the above copyright 19 * notice, this list of conditions and the following disclaimer in 20 * the documentation and/or other materials provided with the 21 * distribution. 22 * 3. The names of its contributors may not be used to endorse or promote 23 * products derived from this software without specific prior written 24 * permission. 25 * 26 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 27 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 29 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 30 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 31 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 32 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 33 * SOFTWARE. 34 */ 35 36 #ifndef _CEC_UAPI_H 37 #define _CEC_UAPI_H 38 39 #include <linux/types.h> 40 #include <linux/string.h> 41 42 #define CEC_MAX_MSG_SIZE 16 43 44 /** 45 * struct cec_msg - CEC message structure. 46 * @tx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the 47 * driver when the message transmission has finished. 48 * @rx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the 49 * driver when the message was received. 50 * @len: Length in bytes of the message. 51 * @timeout: The timeout (in ms) that is used to timeout CEC_RECEIVE. 52 * Set to 0 if you want to wait forever. This timeout can also be 53 * used with CEC_TRANSMIT as the timeout for waiting for a reply. 54 * If 0, then it will use a 1 second timeout instead of waiting 55 * forever as is done with CEC_RECEIVE. 56 * @sequence: The framework assigns a sequence number to messages that are 57 * sent. This can be used to track replies to previously sent 58 * messages. 59 * @flags: Set to 0. 60 * @msg: The message payload. 61 * @reply: This field is ignored with CEC_RECEIVE and is only used by 62 * CEC_TRANSMIT. If non-zero, then wait for a reply with this 63 * opcode. Set to CEC_MSG_FEATURE_ABORT if you want to wait for 64 * a possible ABORT reply. If there was an error when sending the 65 * msg or FeatureAbort was returned, then reply is set to 0. 66 * If reply is non-zero upon return, then len/msg are set to 67 * the received message. 68 * If reply is zero upon return and status has the 69 * CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to 70 * the received feature abort message. 71 * If reply is zero upon return and status has the 72 * CEC_TX_STATUS_MAX_RETRIES bit set, then no reply was seen at 73 * all. If reply is non-zero for CEC_TRANSMIT and the message is a 74 * broadcast, then -EINVAL is returned. 75 * if reply is non-zero, then timeout is set to 1000 (the required 76 * maximum response time). 77 * @rx_status: The message receive status bits. Set by the driver. 78 * @tx_status: The message transmit status bits. Set by the driver. 79 * @tx_arb_lost_cnt: The number of 'Arbitration Lost' events. Set by the driver. 80 * @tx_nack_cnt: The number of 'Not Acknowledged' events. Set by the driver. 81 * @tx_low_drive_cnt: The number of 'Low Drive Detected' events. Set by the 82 * driver. 83 * @tx_error_cnt: The number of 'Error' events. Set by the driver. 84 */ 85 struct cec_msg { 86 __u64 tx_ts; 87 __u64 rx_ts; 88 __u32 len; 89 __u32 timeout; 90 __u32 sequence; 91 __u32 flags; 92 __u8 msg[CEC_MAX_MSG_SIZE]; 93 __u8 reply; 94 __u8 rx_status; 95 __u8 tx_status; 96 __u8 tx_arb_lost_cnt; 97 __u8 tx_nack_cnt; 98 __u8 tx_low_drive_cnt; 99 __u8 tx_error_cnt; 100 }; 101 102 /** 103 * cec_msg_initiator - return the initiator's logical address. 104 * @msg: the message structure 105 */ 106 static inline __u8 cec_msg_initiator(const struct cec_msg *msg) 107 { 108 return msg->msg[0] >> 4; 109 } 110 111 /** 112 * cec_msg_destination - return the destination's logical address. 113 * @msg: the message structure 114 */ 115 static inline __u8 cec_msg_destination(const struct cec_msg *msg) 116 { 117 return msg->msg[0] & 0xf; 118 } 119 120 /** 121 * cec_msg_opcode - return the opcode of the message, -1 for poll 122 * @msg: the message structure 123 */ 124 static inline int cec_msg_opcode(const struct cec_msg *msg) 125 { 126 return msg->len > 1 ? msg->msg[1] : -1; 127 } 128 129 /** 130 * cec_msg_is_broadcast - return true if this is a broadcast message. 131 * @msg: the message structure 132 */ 133 static inline int cec_msg_is_broadcast(const struct cec_msg *msg) 134 { 135 return (msg->msg[0] & 0xf) == 0xf; 136 } 137 138 /** 139 * cec_msg_init - initialize the message structure. 140 * @msg: the message structure 141 * @initiator: the logical address of the initiator 142 * @destination:the logical address of the destination (0xf for broadcast) 143 * 144 * The whole structure is zeroed, the len field is set to 1 (i.e. a poll 145 * message) and the initiator and destination are filled in. 146 */ 147 static inline void cec_msg_init(struct cec_msg *msg, 148 __u8 initiator, __u8 destination) 149 { 150 memset(msg, 0, sizeof(*msg)); 151 msg->msg[0] = (initiator << 4) | destination; 152 msg->len = 1; 153 } 154 155 /** 156 * cec_msg_set_reply_to - fill in destination/initiator in a reply message. 157 * @msg: the message structure for the reply 158 * @orig: the original message structure 159 * 160 * Set the msg destination to the orig initiator and the msg initiator to the 161 * orig destination. Note that msg and orig may be the same pointer, in which 162 * case the change is done in place. 163 */ 164 static inline void cec_msg_set_reply_to(struct cec_msg *msg, 165 struct cec_msg *orig) 166 { 167 /* The destination becomes the initiator and vice versa */ 168 msg->msg[0] = (cec_msg_destination(orig) << 4) | 169 cec_msg_initiator(orig); 170 msg->reply = msg->timeout = 0; 171 } 172 173 /* cec_msg flags field */ 174 #define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0) 175 176 /* cec_msg tx/rx_status field */ 177 #define CEC_TX_STATUS_OK (1 << 0) 178 #define CEC_TX_STATUS_ARB_LOST (1 << 1) 179 #define CEC_TX_STATUS_NACK (1 << 2) 180 #define CEC_TX_STATUS_LOW_DRIVE (1 << 3) 181 #define CEC_TX_STATUS_ERROR (1 << 4) 182 #define CEC_TX_STATUS_MAX_RETRIES (1 << 5) 183 184 #define CEC_RX_STATUS_OK (1 << 0) 185 #define CEC_RX_STATUS_TIMEOUT (1 << 1) 186 #define CEC_RX_STATUS_FEATURE_ABORT (1 << 2) 187 188 static inline int cec_msg_status_is_ok(const struct cec_msg *msg) 189 { 190 if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK)) 191 return 0; 192 if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK)) 193 return 0; 194 if (!msg->tx_status && !msg->rx_status) 195 return 0; 196 return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT); 197 } 198 199 #define CEC_LOG_ADDR_INVALID 0xff 200 #define CEC_PHYS_ADDR_INVALID 0xffff 201 202 /* 203 * The maximum number of logical addresses one device can be assigned to. 204 * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The 205 * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. 206 */ 207 #define CEC_MAX_LOG_ADDRS 4 208 209 /* The logical addresses defined by CEC 2.0 */ 210 #define CEC_LOG_ADDR_TV 0 211 #define CEC_LOG_ADDR_RECORD_1 1 212 #define CEC_LOG_ADDR_RECORD_2 2 213 #define CEC_LOG_ADDR_TUNER_1 3 214 #define CEC_LOG_ADDR_PLAYBACK_1 4 215 #define CEC_LOG_ADDR_AUDIOSYSTEM 5 216 #define CEC_LOG_ADDR_TUNER_2 6 217 #define CEC_LOG_ADDR_TUNER_3 7 218 #define CEC_LOG_ADDR_PLAYBACK_2 8 219 #define CEC_LOG_ADDR_RECORD_3 9 220 #define CEC_LOG_ADDR_TUNER_4 10 221 #define CEC_LOG_ADDR_PLAYBACK_3 11 222 #define CEC_LOG_ADDR_BACKUP_1 12 223 #define CEC_LOG_ADDR_BACKUP_2 13 224 #define CEC_LOG_ADDR_SPECIFIC 14 225 #define CEC_LOG_ADDR_UNREGISTERED 15 /* as initiator address */ 226 #define CEC_LOG_ADDR_BROADCAST 15 /* ad destination address */ 227 228 /* The logical address types that the CEC device wants to claim */ 229 #define CEC_LOG_ADDR_TYPE_TV 0 230 #define CEC_LOG_ADDR_TYPE_RECORD 1 231 #define CEC_LOG_ADDR_TYPE_TUNER 2 232 #define CEC_LOG_ADDR_TYPE_PLAYBACK 3 233 #define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4 234 #define CEC_LOG_ADDR_TYPE_SPECIFIC 5 235 #define CEC_LOG_ADDR_TYPE_UNREGISTERED 6 236 /* 237 * Switches should use UNREGISTERED. 238 * Processors should use SPECIFIC. 239 */ 240 241 #define CEC_LOG_ADDR_MASK_TV (1 << CEC_LOG_ADDR_TV) 242 #define CEC_LOG_ADDR_MASK_RECORD ((1 << CEC_LOG_ADDR_RECORD_1) | \ 243 (1 << CEC_LOG_ADDR_RECORD_2) | \ 244 (1 << CEC_LOG_ADDR_RECORD_3)) 245 #define CEC_LOG_ADDR_MASK_TUNER ((1 << CEC_LOG_ADDR_TUNER_1) | \ 246 (1 << CEC_LOG_ADDR_TUNER_2) | \ 247 (1 << CEC_LOG_ADDR_TUNER_3) | \ 248 (1 << CEC_LOG_ADDR_TUNER_4)) 249 #define CEC_LOG_ADDR_MASK_PLAYBACK ((1 << CEC_LOG_ADDR_PLAYBACK_1) | \ 250 (1 << CEC_LOG_ADDR_PLAYBACK_2) | \ 251 (1 << CEC_LOG_ADDR_PLAYBACK_3)) 252 #define CEC_LOG_ADDR_MASK_AUDIOSYSTEM (1 << CEC_LOG_ADDR_AUDIOSYSTEM) 253 #define CEC_LOG_ADDR_MASK_BACKUP ((1 << CEC_LOG_ADDR_BACKUP_1) | \ 254 (1 << CEC_LOG_ADDR_BACKUP_2)) 255 #define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC) 256 #define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED) 257 258 static inline int cec_has_tv(__u16 log_addr_mask) 259 { 260 return log_addr_mask & CEC_LOG_ADDR_MASK_TV; 261 } 262 263 static inline int cec_has_record(__u16 log_addr_mask) 264 { 265 return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD; 266 } 267 268 static inline int cec_has_tuner(__u16 log_addr_mask) 269 { 270 return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER; 271 } 272 273 static inline int cec_has_playback(__u16 log_addr_mask) 274 { 275 return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK; 276 } 277 278 static inline int cec_has_audiosystem(__u16 log_addr_mask) 279 { 280 return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM; 281 } 282 283 static inline int cec_has_backup(__u16 log_addr_mask) 284 { 285 return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP; 286 } 287 288 static inline int cec_has_specific(__u16 log_addr_mask) 289 { 290 return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC; 291 } 292 293 static inline int cec_is_unregistered(__u16 log_addr_mask) 294 { 295 return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED; 296 } 297 298 static inline int cec_is_unconfigured(__u16 log_addr_mask) 299 { 300 return log_addr_mask == 0; 301 } 302 303 /* 304 * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID 305 * should be disabled (CEC_S_VENDOR_ID) 306 */ 307 #define CEC_VENDOR_ID_NONE 0xffffffff 308 309 /* The message handling modes */ 310 /* Modes for initiator */ 311 #define CEC_MODE_NO_INITIATOR (0x0 << 0) 312 #define CEC_MODE_INITIATOR (0x1 << 0) 313 #define CEC_MODE_EXCL_INITIATOR (0x2 << 0) 314 #define CEC_MODE_INITIATOR_MSK 0x0f 315 316 /* Modes for follower */ 317 #define CEC_MODE_NO_FOLLOWER (0x0 << 4) 318 #define CEC_MODE_FOLLOWER (0x1 << 4) 319 #define CEC_MODE_EXCL_FOLLOWER (0x2 << 4) 320 #define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4) 321 #define CEC_MODE_MONITOR (0xe << 4) 322 #define CEC_MODE_MONITOR_ALL (0xf << 4) 323 #define CEC_MODE_FOLLOWER_MSK 0xf0 324 325 /* Userspace has to configure the physical address */ 326 #define CEC_CAP_PHYS_ADDR (1 << 0) 327 /* Userspace has to configure the logical addresses */ 328 #define CEC_CAP_LOG_ADDRS (1 << 1) 329 /* Userspace can transmit messages (and thus become follower as well) */ 330 #define CEC_CAP_TRANSMIT (1 << 2) 331 /* 332 * Passthrough all messages instead of processing them. 333 */ 334 #define CEC_CAP_PASSTHROUGH (1 << 3) 335 /* Supports remote control */ 336 #define CEC_CAP_RC (1 << 4) 337 /* Hardware can monitor all messages, not just directed and broadcast. */ 338 #define CEC_CAP_MONITOR_ALL (1 << 5) 339 340 /** 341 * struct cec_caps - CEC capabilities structure. 342 * @driver: name of the CEC device driver. 343 * @name: name of the CEC device. @driver + @name must be unique. 344 * @available_log_addrs: number of available logical addresses. 345 * @capabilities: capabilities of the CEC adapter. 346 * @version: version of the CEC adapter framework. 347 */ 348 struct cec_caps { 349 char driver[32]; 350 char name[32]; 351 __u32 available_log_addrs; 352 __u32 capabilities; 353 __u32 version; 354 }; 355 356 /** 357 * struct cec_log_addrs - CEC logical addresses structure. 358 * @log_addr: the claimed logical addresses. Set by the driver. 359 * @log_addr_mask: current logical address mask. Set by the driver. 360 * @cec_version: the CEC version that the adapter should implement. Set by the 361 * caller. 362 * @num_log_addrs: how many logical addresses should be claimed. Set by the 363 * caller. 364 * @vendor_id: the vendor ID of the device. Set by the caller. 365 * @flags: flags. 366 * @osd_name: the OSD name of the device. Set by the caller. 367 * @primary_device_type: the primary device type for each logical address. 368 * Set by the caller. 369 * @log_addr_type: the logical address types. Set by the caller. 370 * @all_device_types: CEC 2.0: all device types represented by the logical 371 * address. Set by the caller. 372 * @features: CEC 2.0: The logical address features. Set by the caller. 373 */ 374 struct cec_log_addrs { 375 __u8 log_addr[CEC_MAX_LOG_ADDRS]; 376 __u16 log_addr_mask; 377 __u8 cec_version; 378 __u8 num_log_addrs; 379 __u32 vendor_id; 380 __u32 flags; 381 char osd_name[15]; 382 __u8 primary_device_type[CEC_MAX_LOG_ADDRS]; 383 __u8 log_addr_type[CEC_MAX_LOG_ADDRS]; 384 385 /* CEC 2.0 */ 386 __u8 all_device_types[CEC_MAX_LOG_ADDRS]; 387 __u8 features[CEC_MAX_LOG_ADDRS][12]; 388 }; 389 390 /* Allow a fallback to unregistered */ 391 #define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0) 392 /* Passthrough RC messages to the input subsystem */ 393 #define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU (1 << 1) 394 /* CDC-Only device: supports only CDC messages */ 395 #define CEC_LOG_ADDRS_FL_CDC_ONLY (1 << 2) 396 397 /* Events */ 398 399 /* Event that occurs when the adapter state changes */ 400 #define CEC_EVENT_STATE_CHANGE 1 401 /* 402 * This event is sent when messages are lost because the application 403 * didn't empty the message queue in time 404 */ 405 #define CEC_EVENT_LOST_MSGS 2 406 407 #define CEC_EVENT_FL_INITIAL_STATE (1 << 0) 408 409 /** 410 * struct cec_event_state_change - used when the CEC adapter changes state. 411 * @phys_addr: the current physical address 412 * @log_addr_mask: the current logical address mask 413 */ 414 struct cec_event_state_change { 415 __u16 phys_addr; 416 __u16 log_addr_mask; 417 }; 418 419 /** 420 * struct cec_event_lost_msgs - tells you how many messages were lost due. 421 * @lost_msgs: how many messages were lost. 422 */ 423 struct cec_event_lost_msgs { 424 __u32 lost_msgs; 425 }; 426 427 /** 428 * struct cec_event - CEC event structure 429 * @ts: the timestamp of when the event was sent. 430 * @event: the event. 431 * array. 432 * @state_change: the event payload for CEC_EVENT_STATE_CHANGE. 433 * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS. 434 * @raw: array to pad the union. 435 */ 436 struct cec_event { 437 __u64 ts; 438 __u32 event; 439 __u32 flags; 440 union { 441 struct cec_event_state_change state_change; 442 struct cec_event_lost_msgs lost_msgs; 443 __u32 raw[16]; 444 }; 445 }; 446 447 /* ioctls */ 448 449 /* Adapter capabilities */ 450 #define CEC_ADAP_G_CAPS _IOWR('a', 0, struct cec_caps) 451 452 /* 453 * phys_addr is either 0 (if this is the CEC root device) 454 * or a valid physical address obtained from the sink's EDID 455 * as read by this CEC device (if this is a source device) 456 * or a physical address obtained and modified from a sink 457 * EDID and used for a sink CEC device. 458 * If nothing is connected, then phys_addr is 0xffff. 459 * See HDMI 1.4b, section 8.7 (Physical Address). 460 * 461 * The CEC_ADAP_S_PHYS_ADDR ioctl may not be available if that is handled 462 * internally. 463 */ 464 #define CEC_ADAP_G_PHYS_ADDR _IOR('a', 1, __u16) 465 #define CEC_ADAP_S_PHYS_ADDR _IOW('a', 2, __u16) 466 467 /* 468 * Configure the CEC adapter. It sets the device type and which 469 * logical types it will try to claim. It will return which 470 * logical addresses it could actually claim. 471 * An error is returned if the adapter is disabled or if there 472 * is no physical address assigned. 473 */ 474 475 #define CEC_ADAP_G_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs) 476 #define CEC_ADAP_S_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs) 477 478 /* Transmit/receive a CEC command */ 479 #define CEC_TRANSMIT _IOWR('a', 5, struct cec_msg) 480 #define CEC_RECEIVE _IOWR('a', 6, struct cec_msg) 481 482 /* Dequeue CEC events */ 483 #define CEC_DQEVENT _IOWR('a', 7, struct cec_event) 484 485 /* 486 * Get and set the message handling mode for this filehandle. 487 */ 488 #define CEC_G_MODE _IOR('a', 8, __u32) 489 #define CEC_S_MODE _IOW('a', 9, __u32) 490 491 /* 492 * The remainder of this header defines all CEC messages and operands. 493 * The format matters since it the cec-ctl utility parses it to generate 494 * code for implementing all these messages. 495 * 496 * Comments ending with 'Feature' group messages for each feature. 497 * If messages are part of multiple features, then the "Has also" 498 * comment is used to list the previously defined messages that are 499 * supported by the feature. 500 * 501 * Before operands are defined a comment is added that gives the 502 * name of the operand and in brackets the variable name of the 503 * corresponding argument in the cec-funcs.h function. 504 */ 505 506 /* Messages */ 507 508 /* One Touch Play Feature */ 509 #define CEC_MSG_ACTIVE_SOURCE 0x82 510 #define CEC_MSG_IMAGE_VIEW_ON 0x04 511 #define CEC_MSG_TEXT_VIEW_ON 0x0d 512 513 514 /* Routing Control Feature */ 515 516 /* 517 * Has also: 518 * CEC_MSG_ACTIVE_SOURCE 519 */ 520 521 #define CEC_MSG_INACTIVE_SOURCE 0x9d 522 #define CEC_MSG_REQUEST_ACTIVE_SOURCE 0x85 523 #define CEC_MSG_ROUTING_CHANGE 0x80 524 #define CEC_MSG_ROUTING_INFORMATION 0x81 525 #define CEC_MSG_SET_STREAM_PATH 0x86 526 527 528 /* Standby Feature */ 529 #define CEC_MSG_STANDBY 0x36 530 531 532 /* One Touch Record Feature */ 533 #define CEC_MSG_RECORD_OFF 0x0b 534 #define CEC_MSG_RECORD_ON 0x09 535 /* Record Source Type Operand (rec_src_type) */ 536 #define CEC_OP_RECORD_SRC_OWN 1 537 #define CEC_OP_RECORD_SRC_DIGITAL 2 538 #define CEC_OP_RECORD_SRC_ANALOG 3 539 #define CEC_OP_RECORD_SRC_EXT_PLUG 4 540 #define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5 541 /* Service Identification Method Operand (service_id_method) */ 542 #define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0 543 #define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1 544 /* Digital Service Broadcast System Operand (dig_bcast_system) */ 545 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN 0x00 546 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN 0x01 547 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN 0x02 548 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS 0x08 549 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS 0x09 550 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T 0x0a 551 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE 0x10 552 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT 0x11 553 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T 0x12 554 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C 0x18 555 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S 0x19 556 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2 0x1a 557 #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T 0x1b 558 /* Analogue Broadcast Type Operand (ana_bcast_type) */ 559 #define CEC_OP_ANA_BCAST_TYPE_CABLE 0 560 #define CEC_OP_ANA_BCAST_TYPE_SATELLITE 1 561 #define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL 2 562 /* Broadcast System Operand (bcast_system) */ 563 #define CEC_OP_BCAST_SYSTEM_PAL_BG 0x00 564 #define CEC_OP_BCAST_SYSTEM_SECAM_LQ 0x01 /* SECAM L' */ 565 #define CEC_OP_BCAST_SYSTEM_PAL_M 0x02 566 #define CEC_OP_BCAST_SYSTEM_NTSC_M 0x03 567 #define CEC_OP_BCAST_SYSTEM_PAL_I 0x04 568 #define CEC_OP_BCAST_SYSTEM_SECAM_DK 0x05 569 #define CEC_OP_BCAST_SYSTEM_SECAM_BG 0x06 570 #define CEC_OP_BCAST_SYSTEM_SECAM_L 0x07 571 #define CEC_OP_BCAST_SYSTEM_PAL_DK 0x08 572 #define CEC_OP_BCAST_SYSTEM_OTHER 0x1f 573 /* Channel Number Format Operand (channel_number_fmt) */ 574 #define CEC_OP_CHANNEL_NUMBER_FMT_1_PART 0x01 575 #define CEC_OP_CHANNEL_NUMBER_FMT_2_PART 0x02 576 577 #define CEC_MSG_RECORD_STATUS 0x0a 578 /* Record Status Operand (rec_status) */ 579 #define CEC_OP_RECORD_STATUS_CUR_SRC 0x01 580 #define CEC_OP_RECORD_STATUS_DIG_SERVICE 0x02 581 #define CEC_OP_RECORD_STATUS_ANA_SERVICE 0x03 582 #define CEC_OP_RECORD_STATUS_EXT_INPUT 0x04 583 #define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE 0x05 584 #define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE 0x06 585 #define CEC_OP_RECORD_STATUS_NO_SERVICE 0x07 586 #define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG 0x09 587 #define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR 0x0a 588 #define CEC_OP_RECORD_STATUS_UNSUP_CA 0x0b 589 #define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS 0x0c 590 #define CEC_OP_RECORD_STATUS_CANT_COPY_SRC 0x0d 591 #define CEC_OP_RECORD_STATUS_NO_MORE_COPIES 0x0e 592 #define CEC_OP_RECORD_STATUS_NO_MEDIA 0x10 593 #define CEC_OP_RECORD_STATUS_PLAYING 0x11 594 #define CEC_OP_RECORD_STATUS_ALREADY_RECORDING 0x12 595 #define CEC_OP_RECORD_STATUS_MEDIA_PROT 0x13 596 #define CEC_OP_RECORD_STATUS_NO_SIGNAL 0x14 597 #define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM 0x15 598 #define CEC_OP_RECORD_STATUS_NO_SPACE 0x16 599 #define CEC_OP_RECORD_STATUS_PARENTAL_LOCK 0x17 600 #define CEC_OP_RECORD_STATUS_TERMINATED_OK 0x1a 601 #define CEC_OP_RECORD_STATUS_ALREADY_TERM 0x1b 602 #define CEC_OP_RECORD_STATUS_OTHER 0x1f 603 604 #define CEC_MSG_RECORD_TV_SCREEN 0x0f 605 606 607 /* Timer Programming Feature */ 608 #define CEC_MSG_CLEAR_ANALOGUE_TIMER 0x33 609 /* Recording Sequence Operand (recording_seq) */ 610 #define CEC_OP_REC_SEQ_SUNDAY 0x01 611 #define CEC_OP_REC_SEQ_MONDAY 0x02 612 #define CEC_OP_REC_SEQ_TUESDAY 0x04 613 #define CEC_OP_REC_SEQ_WEDNESDAY 0x08 614 #define CEC_OP_REC_SEQ_THURSDAY 0x10 615 #define CEC_OP_REC_SEQ_FRIDAY 0x20 616 #define CEC_OP_REC_SEQ_SATERDAY 0x40 617 #define CEC_OP_REC_SEQ_ONCE_ONLY 0x00 618 619 #define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99 620 621 #define CEC_MSG_CLEAR_EXT_TIMER 0xa1 622 /* External Source Specifier Operand (ext_src_spec) */ 623 #define CEC_OP_EXT_SRC_PLUG 0x04 624 #define CEC_OP_EXT_SRC_PHYS_ADDR 0x05 625 626 #define CEC_MSG_SET_ANALOGUE_TIMER 0x34 627 #define CEC_MSG_SET_DIGITAL_TIMER 0x97 628 #define CEC_MSG_SET_EXT_TIMER 0xa2 629 630 #define CEC_MSG_SET_TIMER_PROGRAM_TITLE 0x67 631 #define CEC_MSG_TIMER_CLEARED_STATUS 0x43 632 /* Timer Cleared Status Data Operand (timer_cleared_status) */ 633 #define CEC_OP_TIMER_CLR_STAT_RECORDING 0x00 634 #define CEC_OP_TIMER_CLR_STAT_NO_MATCHING 0x01 635 #define CEC_OP_TIMER_CLR_STAT_NO_INFO 0x02 636 #define CEC_OP_TIMER_CLR_STAT_CLEARED 0x80 637 638 #define CEC_MSG_TIMER_STATUS 0x35 639 /* Timer Overlap Warning Operand (timer_overlap_warning) */ 640 #define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP 0 641 #define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP 1 642 /* Media Info Operand (media_info) */ 643 #define CEC_OP_MEDIA_INFO_UNPROT_MEDIA 0 644 #define CEC_OP_MEDIA_INFO_PROT_MEDIA 1 645 #define CEC_OP_MEDIA_INFO_NO_MEDIA 2 646 /* Programmed Indicator Operand (prog_indicator) */ 647 #define CEC_OP_PROG_IND_NOT_PROGRAMMED 0 648 #define CEC_OP_PROG_IND_PROGRAMMED 1 649 /* Programmed Info Operand (prog_info) */ 650 #define CEC_OP_PROG_INFO_ENOUGH_SPACE 0x08 651 #define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE 0x09 652 #define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE 0x0b 653 #define CEC_OP_PROG_INFO_NONE_AVAILABLE 0x0a 654 /* Not Programmed Error Info Operand (prog_error) */ 655 #define CEC_OP_PROG_ERROR_NO_FREE_TIMER 0x01 656 #define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE 0x02 657 #define CEC_OP_PROG_ERROR_REC_SEQ_ERROR 0x03 658 #define CEC_OP_PROG_ERROR_INV_EXT_PLUG 0x04 659 #define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR 0x05 660 #define CEC_OP_PROG_ERROR_CA_UNSUPP 0x06 661 #define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS 0x07 662 #define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP 0x08 663 #define CEC_OP_PROG_ERROR_PARENTAL_LOCK 0x09 664 #define CEC_OP_PROG_ERROR_CLOCK_FAILURE 0x0a 665 #define CEC_OP_PROG_ERROR_DUPLICATE 0x0e 666 667 668 /* System Information Feature */ 669 #define CEC_MSG_CEC_VERSION 0x9e 670 /* CEC Version Operand (cec_version) */ 671 #define CEC_OP_CEC_VERSION_1_3A 4 672 #define CEC_OP_CEC_VERSION_1_4 5 673 #define CEC_OP_CEC_VERSION_2_0 6 674 675 #define CEC_MSG_GET_CEC_VERSION 0x9f 676 #define CEC_MSG_GIVE_PHYSICAL_ADDR 0x83 677 #define CEC_MSG_GET_MENU_LANGUAGE 0x91 678 #define CEC_MSG_REPORT_PHYSICAL_ADDR 0x84 679 /* Primary Device Type Operand (prim_devtype) */ 680 #define CEC_OP_PRIM_DEVTYPE_TV 0 681 #define CEC_OP_PRIM_DEVTYPE_RECORD 1 682 #define CEC_OP_PRIM_DEVTYPE_TUNER 3 683 #define CEC_OP_PRIM_DEVTYPE_PLAYBACK 4 684 #define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM 5 685 #define CEC_OP_PRIM_DEVTYPE_SWITCH 6 686 #define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7 687 688 #define CEC_MSG_SET_MENU_LANGUAGE 0x32 689 #define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */ 690 /* All Device Types Operand (all_device_types) */ 691 #define CEC_OP_ALL_DEVTYPE_TV 0x80 692 #define CEC_OP_ALL_DEVTYPE_RECORD 0x40 693 #define CEC_OP_ALL_DEVTYPE_TUNER 0x20 694 #define CEC_OP_ALL_DEVTYPE_PLAYBACK 0x10 695 #define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM 0x08 696 #define CEC_OP_ALL_DEVTYPE_SWITCH 0x04 697 /* 698 * And if you wondering what happened to PROCESSOR devices: those should 699 * be mapped to a SWITCH. 700 */ 701 702 /* Valid for RC Profile and Device Feature operands */ 703 #define CEC_OP_FEAT_EXT 0x80 /* Extension bit */ 704 /* RC Profile Operand (rc_profile) */ 705 #define CEC_OP_FEAT_RC_TV_PROFILE_NONE 0x00 706 #define CEC_OP_FEAT_RC_TV_PROFILE_1 0x02 707 #define CEC_OP_FEAT_RC_TV_PROFILE_2 0x06 708 #define CEC_OP_FEAT_RC_TV_PROFILE_3 0x0a 709 #define CEC_OP_FEAT_RC_TV_PROFILE_4 0x0e 710 #define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU 0x50 711 #define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU 0x48 712 #define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU 0x44 713 #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU 0x42 714 #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU 0x41 715 /* Device Feature Operand (dev_features) */ 716 #define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN 0x40 717 #define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING 0x20 718 #define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL 0x10 719 #define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08 720 #define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04 721 #define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02 722 723 #define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */ 724 725 726 /* Deck Control Feature */ 727 #define CEC_MSG_DECK_CONTROL 0x42 728 /* Deck Control Mode Operand (deck_control_mode) */ 729 #define CEC_OP_DECK_CTL_MODE_SKIP_FWD 1 730 #define CEC_OP_DECK_CTL_MODE_SKIP_REV 2 731 #define CEC_OP_DECK_CTL_MODE_STOP 3 732 #define CEC_OP_DECK_CTL_MODE_EJECT 4 733 734 #define CEC_MSG_DECK_STATUS 0x1b 735 /* Deck Info Operand (deck_info) */ 736 #define CEC_OP_DECK_INFO_PLAY 0x11 737 #define CEC_OP_DECK_INFO_RECORD 0x12 738 #define CEC_OP_DECK_INFO_PLAY_REV 0x13 739 #define CEC_OP_DECK_INFO_STILL 0x14 740 #define CEC_OP_DECK_INFO_SLOW 0x15 741 #define CEC_OP_DECK_INFO_SLOW_REV 0x16 742 #define CEC_OP_DECK_INFO_FAST_FWD 0x17 743 #define CEC_OP_DECK_INFO_FAST_REV 0x18 744 #define CEC_OP_DECK_INFO_NO_MEDIA 0x19 745 #define CEC_OP_DECK_INFO_STOP 0x1a 746 #define CEC_OP_DECK_INFO_SKIP_FWD 0x1b 747 #define CEC_OP_DECK_INFO_SKIP_REV 0x1c 748 #define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD 0x1d 749 #define CEC_OP_DECK_INFO_INDEX_SEARCH_REV 0x1e 750 #define CEC_OP_DECK_INFO_OTHER 0x1f 751 752 #define CEC_MSG_GIVE_DECK_STATUS 0x1a 753 /* Status Request Operand (status_req) */ 754 #define CEC_OP_STATUS_REQ_ON 1 755 #define CEC_OP_STATUS_REQ_OFF 2 756 #define CEC_OP_STATUS_REQ_ONCE 3 757 758 #define CEC_MSG_PLAY 0x41 759 /* Play Mode Operand (play_mode) */ 760 #define CEC_OP_PLAY_MODE_PLAY_FWD 0x24 761 #define CEC_OP_PLAY_MODE_PLAY_REV 0x20 762 #define CEC_OP_PLAY_MODE_PLAY_STILL 0x25 763 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN 0x05 764 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED 0x06 765 #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX 0x07 766 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN 0x09 767 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED 0x0a 768 #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX 0x0b 769 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN 0x15 770 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED 0x16 771 #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX 0x17 772 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN 0x19 773 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED 0x1a 774 #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX 0x1b 775 776 777 /* Tuner Control Feature */ 778 #define CEC_MSG_GIVE_TUNER_DEVICE_STATUS 0x08 779 #define CEC_MSG_SELECT_ANALOGUE_SERVICE 0x92 780 #define CEC_MSG_SELECT_DIGITAL_SERVICE 0x93 781 #define CEC_MSG_TUNER_DEVICE_STATUS 0x07 782 /* Recording Flag Operand (rec_flag) */ 783 #define CEC_OP_REC_FLAG_USED 0 784 #define CEC_OP_REC_FLAG_NOT_USED 1 785 /* Tuner Display Info Operand (tuner_display_info) */ 786 #define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL 0 787 #define CEC_OP_TUNER_DISPLAY_INFO_NONE 1 788 #define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE 2 789 790 #define CEC_MSG_TUNER_STEP_DECREMENT 0x06 791 #define CEC_MSG_TUNER_STEP_INCREMENT 0x05 792 793 794 /* Vendor Specific Commands Feature */ 795 796 /* 797 * Has also: 798 * CEC_MSG_CEC_VERSION 799 * CEC_MSG_GET_CEC_VERSION 800 */ 801 #define CEC_MSG_DEVICE_VENDOR_ID 0x87 802 #define CEC_MSG_GIVE_DEVICE_VENDOR_ID 0x8c 803 #define CEC_MSG_VENDOR_COMMAND 0x89 804 #define CEC_MSG_VENDOR_COMMAND_WITH_ID 0xa0 805 #define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN 0x8a 806 #define CEC_MSG_VENDOR_REMOTE_BUTTON_UP 0x8b 807 808 809 /* OSD Display Feature */ 810 #define CEC_MSG_SET_OSD_STRING 0x64 811 /* Display Control Operand (disp_ctl) */ 812 #define CEC_OP_DISP_CTL_DEFAULT 0x00 813 #define CEC_OP_DISP_CTL_UNTIL_CLEARED 0x40 814 #define CEC_OP_DISP_CTL_CLEAR 0x80 815 816 817 /* Device OSD Transfer Feature */ 818 #define CEC_MSG_GIVE_OSD_NAME 0x46 819 #define CEC_MSG_SET_OSD_NAME 0x47 820 821 822 /* Device Menu Control Feature */ 823 #define CEC_MSG_MENU_REQUEST 0x8d 824 /* Menu Request Type Operand (menu_req) */ 825 #define CEC_OP_MENU_REQUEST_ACTIVATE 0x00 826 #define CEC_OP_MENU_REQUEST_DEACTIVATE 0x01 827 #define CEC_OP_MENU_REQUEST_QUERY 0x02 828 829 #define CEC_MSG_MENU_STATUS 0x8e 830 /* Menu State Operand (menu_state) */ 831 #define CEC_OP_MENU_STATE_ACTIVATED 0x00 832 #define CEC_OP_MENU_STATE_DEACTIVATED 0x01 833 834 #define CEC_MSG_USER_CONTROL_PRESSED 0x44 835 /* UI Broadcast Type Operand (ui_bcast_type) */ 836 #define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL 0x00 837 #define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA 0x01 838 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE 0x10 839 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T 0x20 840 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE 0x30 841 #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT 0x40 842 #define CEC_OP_UI_BCAST_TYPE_DIGITAL 0x50 843 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_T 0x60 844 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE 0x70 845 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT 0x80 846 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT 0x90 847 #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2 0x91 848 #define CEC_OP_UI_BCAST_TYPE_IP 0xa0 849 /* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */ 850 #define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO 0x10 851 #define CEC_OP_UI_SND_PRES_CTL_KARAOKE 0x20 852 #define CEC_OP_UI_SND_PRES_CTL_DOWNMIX 0x80 853 #define CEC_OP_UI_SND_PRES_CTL_REVERB 0x90 854 #define CEC_OP_UI_SND_PRES_CTL_EQUALIZER 0xa0 855 #define CEC_OP_UI_SND_PRES_CTL_BASS_UP 0xb1 856 #define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL 0xb2 857 #define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN 0xb3 858 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP 0xc1 859 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL 0xc2 860 #define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN 0xc3 861 862 #define CEC_MSG_USER_CONTROL_RELEASED 0x45 863 864 865 /* Remote Control Passthrough Feature */ 866 867 /* 868 * Has also: 869 * CEC_MSG_USER_CONTROL_PRESSED 870 * CEC_MSG_USER_CONTROL_RELEASED 871 */ 872 873 874 /* Power Status Feature */ 875 #define CEC_MSG_GIVE_DEVICE_POWER_STATUS 0x8f 876 #define CEC_MSG_REPORT_POWER_STATUS 0x90 877 /* Power Status Operand (pwr_state) */ 878 #define CEC_OP_POWER_STATUS_ON 0 879 #define CEC_OP_POWER_STATUS_STANDBY 1 880 #define CEC_OP_POWER_STATUS_TO_ON 2 881 #define CEC_OP_POWER_STATUS_TO_STANDBY 3 882 883 884 /* General Protocol Messages */ 885 #define CEC_MSG_FEATURE_ABORT 0x00 886 /* Abort Reason Operand (reason) */ 887 #define CEC_OP_ABORT_UNRECOGNIZED_OP 0 888 #define CEC_OP_ABORT_INCORRECT_MODE 1 889 #define CEC_OP_ABORT_NO_SOURCE 2 890 #define CEC_OP_ABORT_INVALID_OP 3 891 #define CEC_OP_ABORT_REFUSED 4 892 #define CEC_OP_ABORT_UNDETERMINED 5 893 894 #define CEC_MSG_ABORT 0xff 895 896 897 /* System Audio Control Feature */ 898 899 /* 900 * Has also: 901 * CEC_MSG_USER_CONTROL_PRESSED 902 * CEC_MSG_USER_CONTROL_RELEASED 903 */ 904 #define CEC_MSG_GIVE_AUDIO_STATUS 0x71 905 #define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d 906 #define CEC_MSG_REPORT_AUDIO_STATUS 0x7a 907 /* Audio Mute Status Operand (aud_mute_status) */ 908 #define CEC_OP_AUD_MUTE_STATUS_OFF 0 909 #define CEC_OP_AUD_MUTE_STATUS_ON 1 910 911 #define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR 0xa3 912 #define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR 0xa4 913 #define CEC_MSG_SET_SYSTEM_AUDIO_MODE 0x72 914 /* System Audio Status Operand (sys_aud_status) */ 915 #define CEC_OP_SYS_AUD_STATUS_OFF 0 916 #define CEC_OP_SYS_AUD_STATUS_ON 1 917 918 #define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST 0x70 919 #define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS 0x7e 920 /* Audio Format ID Operand (audio_format_id) */ 921 #define CEC_OP_AUD_FMT_ID_CEA861 0 922 #define CEC_OP_AUD_FMT_ID_CEA861_CXT 1 923 924 925 /* Audio Rate Control Feature */ 926 #define CEC_MSG_SET_AUDIO_RATE 0x9a 927 /* Audio Rate Operand (audio_rate) */ 928 #define CEC_OP_AUD_RATE_OFF 0 929 #define CEC_OP_AUD_RATE_WIDE_STD 1 930 #define CEC_OP_AUD_RATE_WIDE_FAST 2 931 #define CEC_OP_AUD_RATE_WIDE_SLOW 3 932 #define CEC_OP_AUD_RATE_NARROW_STD 4 933 #define CEC_OP_AUD_RATE_NARROW_FAST 5 934 #define CEC_OP_AUD_RATE_NARROW_SLOW 6 935 936 937 /* Audio Return Channel Control Feature */ 938 #define CEC_MSG_INITIATE_ARC 0xc0 939 #define CEC_MSG_REPORT_ARC_INITIATED 0xc1 940 #define CEC_MSG_REPORT_ARC_TERMINATED 0xc2 941 #define CEC_MSG_REQUEST_ARC_INITIATION 0xc3 942 #define CEC_MSG_REQUEST_ARC_TERMINATION 0xc4 943 #define CEC_MSG_TERMINATE_ARC 0xc5 944 945 946 /* Dynamic Audio Lipsync Feature */ 947 /* Only for CEC 2.0 and up */ 948 #define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7 949 #define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8 950 /* Low Latency Mode Operand (low_latency_mode) */ 951 #define CEC_OP_LOW_LATENCY_MODE_OFF 0 952 #define CEC_OP_LOW_LATENCY_MODE_ON 1 953 /* Audio Output Compensated Operand (audio_out_compensated) */ 954 #define CEC_OP_AUD_OUT_COMPENSATED_NA 0 955 #define CEC_OP_AUD_OUT_COMPENSATED_DELAY 1 956 #define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY 2 957 #define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3 958 959 960 /* Capability Discovery and Control Feature */ 961 #define CEC_MSG_CDC_MESSAGE 0xf8 962 /* Ethernet-over-HDMI: nobody ever does this... */ 963 #define CEC_MSG_CDC_HEC_INQUIRE_STATE 0x00 964 #define CEC_MSG_CDC_HEC_REPORT_STATE 0x01 965 /* HEC Functionality State Operand (hec_func_state) */ 966 #define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED 0 967 #define CEC_OP_HEC_FUNC_STATE_INACTIVE 1 968 #define CEC_OP_HEC_FUNC_STATE_ACTIVE 2 969 #define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD 3 970 /* Host Functionality State Operand (host_func_state) */ 971 #define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED 0 972 #define CEC_OP_HOST_FUNC_STATE_INACTIVE 1 973 #define CEC_OP_HOST_FUNC_STATE_ACTIVE 2 974 /* ENC Functionality State Operand (enc_func_state) */ 975 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED 0 976 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE 1 977 #define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE 2 978 /* CDC Error Code Operand (cdc_errcode) */ 979 #define CEC_OP_CDC_ERROR_CODE_NONE 0 980 #define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED 1 981 #define CEC_OP_CDC_ERROR_CODE_WRONG_STATE 2 982 #define CEC_OP_CDC_ERROR_CODE_OTHER 3 983 /* HEC Support Operand (hec_support) */ 984 #define CEC_OP_HEC_SUPPORT_NO 0 985 #define CEC_OP_HEC_SUPPORT_YES 1 986 /* HEC Activation Operand (hec_activation) */ 987 #define CEC_OP_HEC_ACTIVATION_ON 0 988 #define CEC_OP_HEC_ACTIVATION_OFF 1 989 990 #define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT 0x02 991 #define CEC_MSG_CDC_HEC_SET_STATE 0x03 992 /* HEC Set State Operand (hec_set_state) */ 993 #define CEC_OP_HEC_SET_STATE_DEACTIVATE 0 994 #define CEC_OP_HEC_SET_STATE_ACTIVATE 1 995 996 #define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION 0x04 997 #define CEC_MSG_CDC_HEC_NOTIFY_ALIVE 0x05 998 #define CEC_MSG_CDC_HEC_DISCOVER 0x06 999 /* Hotplug Detect messages */ 1000 #define CEC_MSG_CDC_HPD_SET_STATE 0x10 1001 /* HPD State Operand (hpd_state) */ 1002 #define CEC_OP_HPD_STATE_CP_EDID_DISABLE 0 1003 #define CEC_OP_HPD_STATE_CP_EDID_ENABLE 1 1004 #define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE 2 1005 #define CEC_OP_HPD_STATE_EDID_DISABLE 3 1006 #define CEC_OP_HPD_STATE_EDID_ENABLE 4 1007 #define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE 5 1008 #define CEC_MSG_CDC_HPD_REPORT_STATE 0x11 1009 /* HPD Error Code Operand (hpd_error) */ 1010 #define CEC_OP_HPD_ERROR_NONE 0 1011 #define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE 1 1012 #define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE 2 1013 #define CEC_OP_HPD_ERROR_OTHER 3 1014 #define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4 1015 1016 /* End of Messages */ 1017 1018 /* Helper functions to identify the 'special' CEC devices */ 1019 1020 static inline int cec_is_2nd_tv(const struct cec_log_addrs *las) 1021 { 1022 /* 1023 * It is a second TV if the logical address is 14 or 15 and the 1024 * primary device type is a TV. 1025 */ 1026 return las->num_log_addrs && 1027 las->log_addr[0] >= CEC_LOG_ADDR_SPECIFIC && 1028 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_TV; 1029 } 1030 1031 static inline int cec_is_processor(const struct cec_log_addrs *las) 1032 { 1033 /* 1034 * It is a processor if the logical address is 12-15 and the 1035 * primary device type is a Processor. 1036 */ 1037 return las->num_log_addrs && 1038 las->log_addr[0] >= CEC_LOG_ADDR_BACKUP_1 && 1039 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_PROCESSOR; 1040 } 1041 1042 static inline int cec_is_switch(const struct cec_log_addrs *las) 1043 { 1044 /* 1045 * It is a switch if the logical address is 15 and the 1046 * primary device type is a Switch and the CDC-Only flag is not set. 1047 */ 1048 return las->num_log_addrs == 1 && 1049 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && 1050 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && 1051 !(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); 1052 } 1053 1054 static inline int cec_is_cdc_only(const struct cec_log_addrs *las) 1055 { 1056 /* 1057 * It is a CDC-only device if the logical address is 15 and the 1058 * primary device type is a Switch and the CDC-Only flag is set. 1059 */ 1060 return las->num_log_addrs == 1 && 1061 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && 1062 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && 1063 (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); 1064 } 1065 1066 #endif 1067
