Home | History | Annotate | Download | only in libnetfilter_conntrack 
      1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
      2 # @configure_input@
      3 
      4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
      5 
      6 # This Makefile.in is free software; the Free Software Foundation
      7 # gives unlimited permission to copy and/or distribute it,
      8 # with or without modifications, as long as this notice is preserved.
      9 
     10 # This program is distributed in the hope that it will be useful,
     11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
     12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
     13 # PARTICULAR PURPOSE.
     14 
     15 @SET_MAKE@
     16 
     17 VPATH = @srcdir@
     18 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
     19 am__make_running_with_option = \
     20   case $${target_option-} in \
     21       ?) ;; \
     22       *) echo "am__make_running_with_option: internal error: invalid" \
     23               "target option '$${target_option-}' specified" >&2; \
     24          exit 1;; \
     25   esac; \
     26   has_opt=no; \
     27   sane_makeflags=$$MAKEFLAGS; \
     28   if $(am__is_gnu_make); then \
     29     sane_makeflags=$$MFLAGS; \
     30   else \
     31     case $$MAKEFLAGS in \
     32       *\\[\ \	]*) \
     33         bs=\\; \
     34         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
     35           | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     36     esac; \
     37   fi; \
     38   skip_next=no; \
     39   strip_trailopt () \
     40   { \
     41     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
     42   }; \
     43   for flg in $$sane_makeflags; do \
     44     test $$skip_next = yes && { skip_next=no; continue; }; \
     45     case $$flg in \
     46       *=*|--*) continue;; \
     47         -*I) strip_trailopt 'I'; skip_next=yes;; \
     48       -*I?*) strip_trailopt 'I';; \
     49         -*O) strip_trailopt 'O'; skip_next=yes;; \
     50       -*O?*) strip_trailopt 'O';; \
     51         -*l) strip_trailopt 'l'; skip_next=yes;; \
     52       -*l?*) strip_trailopt 'l';; \
     53       -[dEDm]) skip_next=yes;; \
     54       -[JT]) skip_next=yes;; \
     55     esac; \
     56     case $$flg in \
     57       *$$target_option*) has_opt=yes; break;; \
     58     esac; \
     59   done; \
     60   test $$has_opt = yes
     61 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
     62 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
     63 pkgdatadir = $(datadir)/@PACKAGE@
     64 pkgincludedir = $(includedir)/@PACKAGE@
     65 pkglibdir = $(libdir)/@PACKAGE@
     66 pkglibexecdir = $(libexecdir)/@PACKAGE@
     67 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
     68 install_sh_DATA = $(install_sh) -c -m 644
     69 install_sh_PROGRAM = $(install_sh) -c
     70 install_sh_SCRIPT = $(install_sh) -c
     71 INSTALL_HEADER = $(INSTALL_DATA)
     72 transform = $(program_transform_name)
     73 NORMAL_INSTALL = :
     74 PRE_INSTALL = :
     75 POST_INSTALL = :
     76 NORMAL_UNINSTALL = :
     77 PRE_UNINSTALL = :
     78 POST_UNINSTALL = :
     79 build_triplet = @build@
     80 host_triplet = @host@
     81 DIST_COMMON = $(top_srcdir)/Make_global.am $(srcdir)/Makefile.in \
     82 	$(srcdir)/Makefile.am $(top_srcdir)/configure \
     83 	$(am__configure_deps) $(srcdir)/config.h.in \
     84 	$(srcdir)/libnetfilter_conntrack.pc.in \
     85 	$(srcdir)/doxygen.cfg.in COPYING README build-aux/ar-lib \
     86 	compile build-aux/compile config.guess build-aux/config.guess \
     87 	config.sub build-aux/config.sub depcomp build-aux/depcomp \
     88 	install-sh build-aux/install-sh missing build-aux/missing \
     89 	ltmain.sh build-aux/ltmain.sh $(top_srcdir)/build-aux/ar-lib \
     90 	$(top_srcdir)/build-aux/compile \
     91 	$(top_srcdir)/build-aux/config.guess \
     92 	$(top_srcdir)/build-aux/config.sub \
     93 	$(top_srcdir)/build-aux/install-sh \
     94 	$(top_srcdir)/build-aux/ltmain.sh \
     95 	$(top_srcdir)/build-aux/missing
     96 subdir = .
     97 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
     98 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
     99 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
    100 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
    101 	$(top_srcdir)/configure.ac
    102 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
    103 	$(ACLOCAL_M4)
    104 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
    105  configure.lineno config.status.lineno
    106 mkinstalldirs = $(install_sh) -d
    107 CONFIG_HEADER = config.h
    108 CONFIG_CLEAN_FILES = libnetfilter_conntrack.pc doxygen.cfg
    109 CONFIG_CLEAN_VPATH_FILES =
    110 AM_V_P = $(am__v_P_@AM_V@)
    111 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
    112 am__v_P_0 = false
    113 am__v_P_1 = :
    114 AM_V_GEN = $(am__v_GEN_@AM_V@)
    115 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
    116 am__v_GEN_0 = @echo "  GEN     " $@;
    117 am__v_GEN_1 = 
    118 AM_V_at = $(am__v_at_@AM_V@)
    119 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
    120 am__v_at_0 = @
    121 am__v_at_1 = 
    122 SOURCES =
    123 DIST_SOURCES =
    124 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
    125 	ctags-recursive dvi-recursive html-recursive info-recursive \
    126 	install-data-recursive install-dvi-recursive \
    127 	install-exec-recursive install-html-recursive \
    128 	install-info-recursive install-pdf-recursive \
    129 	install-ps-recursive install-recursive installcheck-recursive \
    130 	installdirs-recursive pdf-recursive ps-recursive \
    131 	tags-recursive uninstall-recursive
    132 am__can_run_installinfo = \
    133   case $$AM_UPDATE_INFO_DIR in \
    134     n|no|NO) false;; \
    135     *) (install-info --version) >/dev/null 2>&1;; \
    136   esac
    137 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
    138 am__vpath_adj = case $$p in \
    139     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    140     *) f=$$p;; \
    141   esac;
    142 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
    143 am__install_max = 40
    144 am__nobase_strip_setup = \
    145   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
    146 am__nobase_strip = \
    147   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
    148 am__nobase_list = $(am__nobase_strip_setup); \
    149   for p in $$list; do echo "$$p $$p"; done | \
    150   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
    151   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    152     if (++n[$$2] == $(am__install_max)) \
    153       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    154     END { for (dir in files) print dir, files[dir] }'
    155 am__base_list = \
    156   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
    157   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
    158 am__uninstall_files_from_dir = { \
    159   test -z "$$files" \
    160     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    161     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
    162          $(am__cd) "$$dir" && rm -f $$files; }; \
    163   }
    164 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
    165 DATA = $(pkgconfig_DATA)
    166 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
    167   distclean-recursive maintainer-clean-recursive
    168 am__recursive_targets = \
    169   $(RECURSIVE_TARGETS) \
    170   $(RECURSIVE_CLEAN_TARGETS) \
    171   $(am__extra_recursive_targets)
    172 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
    173 	cscope distdir dist dist-all distcheck
    174 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
    175 	$(LISP)config.h.in
    176 # Read a list of newline-separated strings from the standard input,
    177 # and print each of them once, without duplicates.  Input order is
    178 # *not* preserved.
    179 am__uniquify_input = $(AWK) '\
    180   BEGIN { nonempty = 0; } \
    181   { items[$$0] = 1; nonempty = 1; } \
    182   END { if (nonempty) { for (i in items) print i; }; } \
    183 '
    184 # Make sure the list of sources is unique.  This is necessary because,
    185 # e.g., the same source file might be shared among _SOURCES variables
    186 # for different programs/libraries.
    187 am__define_uniq_tagged_files = \
    188   list='$(am__tagged_files)'; \
    189   unique=`for i in $$list; do \
    190     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
    191   done | $(am__uniquify_input)`
    192 ETAGS = etags
    193 CTAGS = ctags
    194 CSCOPE = cscope
    195 DIST_SUBDIRS = $(SUBDIRS)
    196 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
    197 distdir = $(PACKAGE)-$(VERSION)
    198 top_distdir = $(distdir)
    199 am__remove_distdir = \
    200   if test -d "$(distdir)"; then \
    201     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
    202       && rm -rf "$(distdir)" \
    203       || { sleep 5 && rm -rf "$(distdir)"; }; \
    204   else :; fi
    205 am__post_remove_distdir = $(am__remove_distdir)
    206 am__relativize = \
    207   dir0=`pwd`; \
    208   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
    209   sed_rest='s,^[^/]*/*,,'; \
    210   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
    211   sed_butlast='s,/*[^/]*$$,,'; \
    212   while test -n "$$dir1"; do \
    213     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    214     if test "$$first" != "."; then \
    215       if test "$$first" = ".."; then \
    216         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
    217         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
    218       else \
    219         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
    220         if test "$$first2" = "$$first"; then \
    221           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
    222         else \
    223           dir2="../$$dir2"; \
    224         fi; \
    225         dir0="$$dir0"/"$$first"; \
    226       fi; \
    227     fi; \
    228     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
    229   done; \
    230   reldir="$$dir2"
    231 GZIP_ENV = --best
    232 DIST_ARCHIVES = $(distdir).tar.bz2
    233 DIST_TARGETS = dist-bzip2
    234 distuninstallcheck_listfiles = find . -type f -print
    235 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
    236   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
    237 distcleancheck_listfiles = find . -type f -print
    238 ACLOCAL = @ACLOCAL@
    239 AMTAR = @AMTAR@
    240 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
    241 AR = @AR@
    242 AUTOCONF = @AUTOCONF@
    243 AUTOHEADER = @AUTOHEADER@
    244 AUTOMAKE = @AUTOMAKE@
    245 AWK = @AWK@
    246 CC = @CC@
    247 CCDEPMODE = @CCDEPMODE@
    248 CFLAGS = @CFLAGS@
    249 CPP = @CPP@
    250 CPPFLAGS = @CPPFLAGS@
    251 CYGPATH_W = @CYGPATH_W@
    252 DEFS = @DEFS@
    253 DEPDIR = @DEPDIR@
    254 DLLTOOL = @DLLTOOL@
    255 DSYMUTIL = @DSYMUTIL@
    256 DUMPBIN = @DUMPBIN@
    257 ECHO_C = @ECHO_C@
    258 ECHO_N = @ECHO_N@
    259 ECHO_T = @ECHO_T@
    260 EGREP = @EGREP@
    261 EXEEXT = @EXEEXT@
    262 FGREP = @FGREP@
    263 GREP = @GREP@
    264 INSTALL = @INSTALL@
    265 INSTALL_DATA = @INSTALL_DATA@
    266 INSTALL_PROGRAM = @INSTALL_PROGRAM@
    267 INSTALL_SCRIPT = @INSTALL_SCRIPT@
    268 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
    269 LD = @LD@
    270 LDFLAGS = @LDFLAGS@
    271 LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
    272 LIBMNL_LIBS = @LIBMNL_LIBS@
    273 LIBNFNETLINK_CFLAGS = @LIBNFNETLINK_CFLAGS@
    274 LIBNFNETLINK_LIBS = @LIBNFNETLINK_LIBS@
    275 LIBOBJS = @LIBOBJS@
    276 LIBS = @LIBS@
    277 LIBTOOL = @LIBTOOL@
    278 LIPO = @LIPO@
    279 LN_S = @LN_S@
    280 LTLIBOBJS = @LTLIBOBJS@
    281 MAKEINFO = @MAKEINFO@
    282 MANIFEST_TOOL = @MANIFEST_TOOL@
    283 MKDIR_P = @MKDIR_P@
    284 NM = @NM@
    285 NMEDIT = @NMEDIT@
    286 OBJDUMP = @OBJDUMP@
    287 OBJEXT = @OBJEXT@
    288 OTOOL = @OTOOL@
    289 OTOOL64 = @OTOOL64@
    290 PACKAGE = @PACKAGE@
    291 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
    292 PACKAGE_NAME = @PACKAGE_NAME@
    293 PACKAGE_STRING = @PACKAGE_STRING@
    294 PACKAGE_TARNAME = @PACKAGE_TARNAME@
    295 PACKAGE_URL = @PACKAGE_URL@
    296 PACKAGE_VERSION = @PACKAGE_VERSION@
    297 PATH_SEPARATOR = @PATH_SEPARATOR@
    298 PKG_CONFIG = @PKG_CONFIG@
    299 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
    300 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
    301 RANLIB = @RANLIB@
    302 SED = @SED@
    303 SET_MAKE = @SET_MAKE@
    304 SHELL = @SHELL@
    305 STRIP = @STRIP@
    306 VERSION = @VERSION@
    307 abs_builddir = @abs_builddir@
    308 abs_srcdir = @abs_srcdir@
    309 abs_top_builddir = @abs_top_builddir@
    310 abs_top_srcdir = @abs_top_srcdir@
    311 ac_ct_AR = @ac_ct_AR@
    312 ac_ct_CC = @ac_ct_CC@
    313 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
    314 am__include = @am__include@
    315 am__leading_dot = @am__leading_dot@
    316 am__quote = @am__quote@
    317 am__tar = @am__tar@
    318 am__untar = @am__untar@
    319 bindir = @bindir@
    320 build = @build@
    321 build_alias = @build_alias@
    322 build_cpu = @build_cpu@
    323 build_os = @build_os@
    324 build_vendor = @build_vendor@
    325 builddir = @builddir@
    326 datadir = @datadir@
    327 datarootdir = @datarootdir@
    328 docdir = @docdir@
    329 dvidir = @dvidir@
    330 exec_prefix = @exec_prefix@
    331 host = @host@
    332 host_alias = @host_alias@
    333 host_cpu = @host_cpu@
    334 host_os = @host_os@
    335 host_vendor = @host_vendor@
    336 htmldir = @htmldir@
    337 includedir = @includedir@
    338 infodir = @infodir@
    339 install_sh = @install_sh@
    340 libdir = @libdir@
    341 libexecdir = @libexecdir@
    342 localedir = @localedir@
    343 localstatedir = @localstatedir@
    344 mandir = @mandir@
    345 mkdir_p = @mkdir_p@
    346 oldincludedir = @oldincludedir@
    347 pdfdir = @pdfdir@
    348 prefix = @prefix@
    349 program_transform_name = @program_transform_name@
    350 psdir = @psdir@
    351 sbindir = @sbindir@
    352 sharedstatedir = @sharedstatedir@
    353 srcdir = @srcdir@
    354 sysconfdir = @sysconfdir@
    355 target_alias = @target_alias@
    356 top_build_prefix = @top_build_prefix@
    357 top_builddir = @top_builddir@
    358 top_srcdir = @top_srcdir@
    359 
    360 # This is _NOT_ the library release version, it's an API version.
    361 # Please read Chapter 6 "Library interface versions" of the libtool
    362 # documentation before making any modification
    363 # http://sources.redhat.com/autobook/autobook/autobook_91.html
    364 LIBVERSION = 9:0:6
    365 AM_CPPFLAGS = -I$(top_srcdir)/include ${LIBNFNETLINK_CFLAGS} ${LIBMNL_CFLAGS}
    366 AM_CFLAGS = -Wall
    367 ACLOCAL_AMFLAGS = -I m4
    368 SUBDIRS = include src utils examples qa
    369 man_MANS = #nfnetlink_conntrack.3 nfnetlink_conntrack.7
    370 pkgconfigdir = $(libdir)/pkgconfig
    371 pkgconfig_DATA = libnetfilter_conntrack.pc
    372 EXTRA_DIST = Make_global.am
    373 all: config.h
    374 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
    375 
    376 .SUFFIXES:
    377 am--refresh: Makefile
    378 	@:
    379 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/Make_global.am $(am__configure_deps)
    380 	@for dep in $?; do \
    381 	  case '$(am__configure_deps)' in \
    382 	    *$$dep*) \
    383 	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
    384 	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
    385 		&& exit 0; \
    386 	      exit 1;; \
    387 	  esac; \
    388 	done; \
    389 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
    390 	$(am__cd) $(top_srcdir) && \
    391 	  $(AUTOMAKE) --foreign Makefile
    392 .PRECIOUS: Makefile
    393 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
    394 	@case '$?' in \
    395 	  *config.status*) \
    396 	    echo ' $(SHELL) ./config.status'; \
    397 	    $(SHELL) ./config.status;; \
    398 	  *) \
    399 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
    400 	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
    401 	esac;
    402 $(top_srcdir)/Make_global.am:
    403 
    404 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
    405 	$(SHELL) ./config.status --recheck
    406 
    407 $(top_srcdir)/configure:  $(am__configure_deps)
    408 	$(am__cd) $(srcdir) && $(AUTOCONF)
    409 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
    410 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
    411 $(am__aclocal_m4_deps):
    412 
    413 config.h: stamp-h1
    414 	@test -f $@ || rm -f stamp-h1
    415 	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
    416 
    417 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
    418 	@rm -f stamp-h1
    419 	cd $(top_builddir) && $(SHELL) ./config.status config.h
    420 $(srcdir)/config.h.in:  $(am__configure_deps) 
    421 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
    422 	rm -f stamp-h1
    423 	touch $@
    424 
    425 distclean-hdr:
    426 	-rm -f config.h stamp-h1
    427 libnetfilter_conntrack.pc: $(top_builddir)/config.status $(srcdir)/libnetfilter_conntrack.pc.in
    428 	cd $(top_builddir) && $(SHELL) ./config.status $@
    429 doxygen.cfg: $(top_builddir)/config.status $(srcdir)/doxygen.cfg.in
    430 	cd $(top_builddir) && $(SHELL) ./config.status $@
    431 
    432 mostlyclean-libtool:
    433 	-rm -f *.lo
    434 
    435 clean-libtool:
    436 	-rm -rf .libs _libs
    437 
    438 distclean-libtool:
    439 	-rm -f libtool config.lt
    440 install-pkgconfigDATA: $(pkgconfig_DATA)
    441 	@$(NORMAL_INSTALL)
    442 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
    443 	if test -n "$$list"; then \
    444 	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
    445 	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
    446 	fi; \
    447 	for p in $$list; do \
    448 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
    449 	  echo "$$d$$p"; \
    450 	done | $(am__base_list) | \
    451 	while read files; do \
    452 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
    453 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
    454 	done
    455 
    456 uninstall-pkgconfigDATA:
    457 	@$(NORMAL_UNINSTALL)
    458 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
    459 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
    460 	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
    461 
    462 # This directory's subdirectories are mostly independent; you can cd
    463 # into them and run 'make' without going through this Makefile.
    464 # To change the values of 'make' variables: instead of editing Makefiles,
    465 # (1) if the variable is set in 'config.status', edit 'config.status'
    466 #     (which will cause the Makefiles to be regenerated when you run 'make');
    467 # (2) otherwise, pass the desired values on the 'make' command line.
    468 $(am__recursive_targets):
    469 	@fail=; \
    470 	if $(am__make_keepgoing); then \
    471 	  failcom='fail=yes'; \
    472 	else \
    473 	  failcom='exit 1'; \
    474 	fi; \
    475 	dot_seen=no; \
    476 	target=`echo $@ | sed s/-recursive//`; \
    477 	case "$@" in \
    478 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
    479 	  *) list='$(SUBDIRS)' ;; \
    480 	esac; \
    481 	for subdir in $$list; do \
    482 	  echo "Making $$target in $$subdir"; \
    483 	  if test "$$subdir" = "."; then \
    484 	    dot_seen=yes; \
    485 	    local_target="$$target-am"; \
    486 	  else \
    487 	    local_target="$$target"; \
    488 	  fi; \
    489 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
    490 	  || eval $$failcom; \
    491 	done; \
    492 	if test "$$dot_seen" = "no"; then \
    493 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
    494 	fi; test -z "$$fail"
    495 
    496 ID: $(am__tagged_files)
    497 	$(am__define_uniq_tagged_files); mkid -fID $$unique
    498 tags: tags-recursive
    499 TAGS: tags
    500 
    501 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
    502 	set x; \
    503 	here=`pwd`; \
    504 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
    505 	  include_option=--etags-include; \
    506 	  empty_fix=.; \
    507 	else \
    508 	  include_option=--include; \
    509 	  empty_fix=; \
    510 	fi; \
    511 	list='$(SUBDIRS)'; for subdir in $$list; do \
    512 	  if test "$$subdir" = .; then :; else \
    513 	    test ! -f $$subdir/TAGS || \
    514 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
    515 	  fi; \
    516 	done; \
    517 	$(am__define_uniq_tagged_files); \
    518 	shift; \
    519 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
    520 	  test -n "$$unique" || unique=$$empty_fix; \
    521 	  if test $$# -gt 0; then \
    522 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
    523 	      "$$@" $$unique; \
    524 	  else \
    525 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
    526 	      $$unique; \
    527 	  fi; \
    528 	fi
    529 ctags: ctags-recursive
    530 
    531 CTAGS: ctags
    532 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
    533 	$(am__define_uniq_tagged_files); \
    534 	test -z "$(CTAGS_ARGS)$$unique" \
    535 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
    536 	     $$unique
    537 
    538 GTAGS:
    539 	here=`$(am__cd) $(top_builddir) && pwd` \
    540 	  && $(am__cd) $(top_srcdir) \
    541 	  && gtags -i $(GTAGS_ARGS) "$$here"
    542 cscope: cscope.files
    543 	test ! -s cscope.files \
    544 	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
    545 clean-cscope:
    546 	-rm -f cscope.files
    547 cscope.files: clean-cscope cscopelist
    548 cscopelist: cscopelist-recursive
    549 
    550 cscopelist-am: $(am__tagged_files)
    551 	list='$(am__tagged_files)'; \
    552 	case "$(srcdir)" in \
    553 	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
    554 	  *) sdir=$(subdir)/$(srcdir) ;; \
    555 	esac; \
    556 	for i in $$list; do \
    557 	  if test -f "$$i"; then \
    558 	    echo "$(subdir)/$$i"; \
    559 	  else \
    560 	    echo "$$sdir/$$i"; \
    561 	  fi; \
    562 	done >> $(top_builddir)/cscope.files
    563 
    564 distclean-tags:
    565 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
    566 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
    567 
    568 distdir: $(DISTFILES)
    569 	$(am__remove_distdir)
    570 	test -d "$(distdir)" || mkdir "$(distdir)"
    571 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
    572 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
    573 	list='$(DISTFILES)'; \
    574 	  dist_files=`for file in $$list; do echo $$file; done | \
    575 	  sed -e "s|^$$srcdirstrip/||;t" \
    576 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
    577 	case $$dist_files in \
    578 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
    579 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
    580 			   sort -u` ;; \
    581 	esac; \
    582 	for file in $$dist_files; do \
    583 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
    584 	  if test -d $$d/$$file; then \
    585 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
    586 	    if test -d "$(distdir)/$$file"; then \
    587 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
    588 	    fi; \
    589 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
    590 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
    591 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
    592 	    fi; \
    593 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
    594 	  else \
    595 	    test -f "$(distdir)/$$file" \
    596 	    || cp -p $$d/$$file "$(distdir)/$$file" \
    597 	    || exit 1; \
    598 	  fi; \
    599 	done
    600 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
    601 	  if test "$$subdir" = .; then :; else \
    602 	    $(am__make_dryrun) \
    603 	      || test -d "$(distdir)/$$subdir" \
    604 	      || $(MKDIR_P) "$(distdir)/$$subdir" \
    605 	      || exit 1; \
    606 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
    607 	    $(am__relativize); \
    608 	    new_distdir=$$reldir; \
    609 	    dir1=$$subdir; dir2="$(top_distdir)"; \
    610 	    $(am__relativize); \
    611 	    new_top_distdir=$$reldir; \
    612 	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
    613 	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
    614 	    ($(am__cd) $$subdir && \
    615 	      $(MAKE) $(AM_MAKEFLAGS) \
    616 	        top_distdir="$$new_top_distdir" \
    617 	        distdir="$$new_distdir" \
    618 		am__remove_distdir=: \
    619 		am__skip_length_check=: \
    620 		am__skip_mode_fix=: \
    621 	        distdir) \
    622 	      || exit 1; \
    623 	  fi; \
    624 	done
    625 	-test -n "$(am__skip_mode_fix)" \
    626 	|| find "$(distdir)" -type d ! -perm -755 \
    627 		-exec chmod u+rwx,go+rx {} \; -o \
    628 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
    629 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
    630 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
    631 	|| chmod -R a+r "$(distdir)"
    632 dist-gzip: distdir
    633 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
    634 	$(am__post_remove_distdir)
    635 dist-bzip2: distdir
    636 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
    637 	$(am__post_remove_distdir)
    638 
    639 dist-lzip: distdir
    640 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
    641 	$(am__post_remove_distdir)
    642 
    643 dist-xz: distdir
    644 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
    645 	$(am__post_remove_distdir)
    646 
    647 dist-tarZ: distdir
    648 	@echo WARNING: "Support for shar distribution archives is" \
    649 	               "deprecated." >&2
    650 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
    651 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
    652 	$(am__post_remove_distdir)
    653 
    654 dist-shar: distdir
    655 	@echo WARNING: "Support for distribution archives compressed with" \
    656 		       "legacy program 'compress' is deprecated." >&2
    657 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
    658 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
    659 	$(am__post_remove_distdir)
    660 
    661 dist-zip: distdir
    662 	-rm -f $(distdir).zip
    663 	zip -rq $(distdir).zip $(distdir)
    664 	$(am__post_remove_distdir)
    665 
    666 dist dist-all:
    667 	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
    668 	$(am__post_remove_distdir)
    669 
    670 # This target untars the dist file and tries a VPATH configuration.  Then
    671 # it guarantees that the distribution is self-contained by making another
    672 # tarfile.
    673 distcheck: dist
    674 	case '$(DIST_ARCHIVES)' in \
    675 	*.tar.gz*) \
    676 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
    677 	*.tar.bz2*) \
    678 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
    679 	*.tar.lz*) \
    680 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
    681 	*.tar.xz*) \
    682 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
    683 	*.tar.Z*) \
    684 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
    685 	*.shar.gz*) \
    686 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
    687 	*.zip*) \
    688 	  unzip $(distdir).zip ;;\
    689 	esac
    690 	chmod -R a-w $(distdir)
    691 	chmod u+w $(distdir)
    692 	mkdir $(distdir)/_build $(distdir)/_inst
    693 	chmod a-w $(distdir)
    694 	test -d $(distdir)/_build || exit 0; \
    695 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
    696 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
    697 	  && am__cwd=`pwd` \
    698 	  && $(am__cd) $(distdir)/_build \
    699 	  && ../configure \
    700 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
    701 	    $(DISTCHECK_CONFIGURE_FLAGS) \
    702 	    --srcdir=.. --prefix="$$dc_install_base" \
    703 	  && $(MAKE) $(AM_MAKEFLAGS) \
    704 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
    705 	  && $(MAKE) $(AM_MAKEFLAGS) check \
    706 	  && $(MAKE) $(AM_MAKEFLAGS) install \
    707 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
    708 	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
    709 	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
    710 	        distuninstallcheck \
    711 	  && chmod -R a-w "$$dc_install_base" \
    712 	  && ({ \
    713 	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
    714 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
    715 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
    716 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
    717 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
    718 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
    719 	  && rm -rf "$$dc_destdir" \
    720 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
    721 	  && rm -rf $(DIST_ARCHIVES) \
    722 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
    723 	  && cd "$$am__cwd" \
    724 	  || exit 1
    725 	$(am__post_remove_distdir)
    726 	@(echo "$(distdir) archives ready for distribution: "; \
    727 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
    728 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
    729 distuninstallcheck:
    730 	@test -n '$(distuninstallcheck_dir)' || { \
    731 	  echo 'ERROR: trying to run $@ with an empty' \
    732 	       '$$(distuninstallcheck_dir)' >&2; \
    733 	  exit 1; \
    734 	}; \
    735 	$(am__cd) '$(distuninstallcheck_dir)' || { \
    736 	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
    737 	  exit 1; \
    738 	}; \
    739 	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
    740 	   || { echo "ERROR: files left after uninstall:" ; \
    741 	        if test -n "$(DESTDIR)"; then \
    742 	          echo "  (check DESTDIR support)"; \
    743 	        fi ; \
    744 	        $(distuninstallcheck_listfiles) ; \
    745 	        exit 1; } >&2
    746 distcleancheck: distclean
    747 	@if test '$(srcdir)' = . ; then \
    748 	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
    749 	  exit 1 ; \
    750 	fi
    751 	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
    752 	  || { echo "ERROR: files left in build directory after distclean:" ; \
    753 	       $(distcleancheck_listfiles) ; \
    754 	       exit 1; } >&2
    755 check-am: all-am
    756 check: check-recursive
    757 all-am: Makefile $(DATA) config.h
    758 installdirs: installdirs-recursive
    759 installdirs-am:
    760 	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
    761 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
    762 	done
    763 install: install-recursive
    764 install-exec: install-exec-recursive
    765 install-data: install-data-recursive
    766 uninstall: uninstall-recursive
    767 
    768 install-am: all-am
    769 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
    770 
    771 installcheck: installcheck-recursive
    772 install-strip:
    773 	if test -z '$(STRIP)'; then \
    774 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    775 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
    776 	      install; \
    777 	else \
    778 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    779 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
    780 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
    781 	fi
    782 mostlyclean-generic:
    783 
    784 clean-generic:
    785 
    786 distclean-generic:
    787 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
    788 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
    789 
    790 maintainer-clean-generic:
    791 	@echo "This command is intended for maintainers to use"
    792 	@echo "it deletes files that may require special tools to rebuild."
    793 clean: clean-recursive
    794 
    795 clean-am: clean-generic clean-libtool mostlyclean-am
    796 
    797 distclean: distclean-recursive
    798 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
    799 	-rm -f Makefile
    800 distclean-am: clean-am distclean-generic distclean-hdr \
    801 	distclean-libtool distclean-tags
    802 
    803 dvi: dvi-recursive
    804 
    805 dvi-am:
    806 
    807 html: html-recursive
    808 
    809 html-am:
    810 
    811 info: info-recursive
    812 
    813 info-am:
    814 
    815 install-data-am: install-pkgconfigDATA
    816 
    817 install-dvi: install-dvi-recursive
    818 
    819 install-dvi-am:
    820 
    821 install-exec-am:
    822 
    823 install-html: install-html-recursive
    824 
    825 install-html-am:
    826 
    827 install-info: install-info-recursive
    828 
    829 install-info-am:
    830 
    831 install-man:
    832 
    833 install-pdf: install-pdf-recursive
    834 
    835 install-pdf-am:
    836 
    837 install-ps: install-ps-recursive
    838 
    839 install-ps-am:
    840 
    841 installcheck-am:
    842 
    843 maintainer-clean: maintainer-clean-recursive
    844 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
    845 	-rm -rf $(top_srcdir)/autom4te.cache
    846 	-rm -f Makefile
    847 maintainer-clean-am: distclean-am maintainer-clean-generic
    848 
    849 mostlyclean: mostlyclean-recursive
    850 
    851 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
    852 
    853 pdf: pdf-recursive
    854 
    855 pdf-am:
    856 
    857 ps: ps-recursive
    858 
    859 ps-am:
    860 
    861 uninstall-am: uninstall-pkgconfigDATA
    862 
    863 .MAKE: $(am__recursive_targets) all install-am install-strip
    864 
    865 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
    866 	am--refresh check check-am clean clean-cscope clean-generic \
    867 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
    868 	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
    869 	dist-xz dist-zip distcheck distclean distclean-generic \
    870 	distclean-hdr distclean-libtool distclean-tags distcleancheck \
    871 	distdir distuninstallcheck dvi dvi-am html html-am info \
    872 	info-am install install-am install-data install-data-am \
    873 	install-dvi install-dvi-am install-exec install-exec-am \
    874 	install-html install-html-am install-info install-info-am \
    875 	install-man install-pdf install-pdf-am install-pkgconfigDATA \
    876 	install-ps install-ps-am install-strip installcheck \
    877 	installcheck-am installdirs installdirs-am maintainer-clean \
    878 	maintainer-clean-generic mostlyclean mostlyclean-generic \
    879 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
    880 	uninstall-am uninstall-pkgconfigDATA
    881 
    882 
    883 # Tell versions [3.59,3.63) of GNU make to not export all variables.
    884 # Otherwise a system limit (for SysV at least) may be exceeded.
    885 .NOEXPORT:
    886