1 /****************************************************************************** 2 * 3 * Copyright (C) 2003-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This is the public interface file for the audio gateway (AG) subsystem 22 * of BTA, Broadcom's Bluetooth application layer for mobile phones. 23 * 24 ******************************************************************************/ 25 #ifndef BTA_AG_API_H 26 #define BTA_AG_API_H 27 28 #include "bta_api.h" 29 30 /***************************************************************************** 31 * Constants and data types 32 ****************************************************************************/ 33 #define HFP_VERSION_1_1 0x0101 34 #define HFP_VERSION_1_5 0x0105 35 #define HFP_VERSION_1_6 0x0106 36 #define HFP_VERSION_1_7 0x0107 37 38 #define HSP_VERSION_1_0 0x0100 39 #define HSP_VERSION_1_2 0x0102 40 41 /* Note, if you change the default version here, please also change the one in 42 * bta_hs_api.h, they are meant to be the same. 43 */ 44 #ifndef BTA_HFP_VERSION 45 #define BTA_HFP_VERSION HFP_VERSION_1_7 46 #endif 47 48 /* AG feature masks */ 49 #define BTA_AG_FEAT_3WAY 0x00000001 /* Three-way calling */ 50 #define BTA_AG_FEAT_ECNR 0x00000002 /* Echo cancellation/noise reduction */ 51 #define BTA_AG_FEAT_VREC 0x00000004 /* Voice recognition */ 52 #define BTA_AG_FEAT_INBAND 0x00000008 /* In-band ring tone */ 53 #define BTA_AG_FEAT_VTAG 0x00000010 /* Attach a phone number to a voice tag */ 54 #define BTA_AG_FEAT_REJECT 0x00000020 /* Ability to reject incoming call */ 55 #define BTA_AG_FEAT_ECS 0x00000040 /* Enhanced Call Status */ 56 #define BTA_AG_FEAT_ECC 0x00000080 /* Enhanced Call Control */ 57 #define BTA_AG_FEAT_EXTERR 0x00000100 /* Extended error codes */ 58 #define BTA_AG_FEAT_CODEC 0x00000200 /* Codec Negotiation */ 59 60 /* Valid feature bit mask for HFP 1.6 (and below) */ 61 #define HFP_1_6_FEAT_MASK 0x000003FF 62 63 /* HFP 1.7+ */ 64 #define BTA_AG_FEAT_HF_IND 0x00000400 /* HF Indicators */ 65 #define BTA_AG_FEAT_ESCO 0x00000800 /* eSCO S4 (and T2) setting supported */ 66 67 /* Proprietary features: using 31 ~ 16 bits */ 68 #define BTA_AG_FEAT_BTRH 0x00010000 /* CCAP incoming call hold */ 69 #define BTA_AG_FEAT_UNAT 0x00020000 /* Pass unknown AT commands to app */ 70 #define BTA_AG_FEAT_NOSCO 0x00040000 /* No SCO control performed by BTA AG */ 71 #define BTA_AG_FEAT_NO_ESCO 0x00080000 /* Do not allow or use eSCO */ 72 #define BTA_AG_FEAT_VOIP 0x00100000 /* VoIP call */ 73 74 typedef uint32_t tBTA_AG_FEAT; 75 76 /* AG parse mode */ 77 #define BTA_AG_PARSE 0 /* Perform AT command parsing in AG */ 78 79 /* Pass data directly to phone's AT command interpreter */ 80 #define BTA_AG_PASS_THROUGH 1 81 82 typedef uint8_t tBTA_AG_PARSE_MODE; 83 84 /* AG open status */ 85 #define BTA_AG_SUCCESS 0 /* Connection successfully opened */ 86 #define BTA_AG_FAIL_SDP 1 /* Open failed due to SDP */ 87 #define BTA_AG_FAIL_RFCOMM 2 /* Open failed due to RFCOMM */ 88 #define BTA_AG_FAIL_RESOURCES 3 /* out of resources failure */ 89 90 /* Status to disallow passing AT Events after BTIF */ 91 #define BTA_AG_DISALLOW_AT 5 92 93 typedef uint8_t tBTA_AG_STATUS; 94 95 /* handle values used with BTA_AgResult */ 96 #define BTA_AG_HANDLE_NONE 0 97 #define BTA_AG_HANDLE_ALL 0xFFFF 98 /* It is safe to use the same value as BTA_AG_HANDLE_ALL 99 * HANDLE_ALL is used for delivering indication 100 * SCO_NO_CHANGE is used for changing sco behavior 101 * They donot interfere with each other 102 */ 103 104 /* Number of supported HF indicators, there is one HF indicator so far i.e. 105 enhanced driver status. */ 106 /* Number of supported HF indicators, 107 1 for Enhanced Safety Status 108 2 for Battery Level Status */ 109 #ifndef BTA_AG_NUM_LOCAL_HF_IND 110 #define BTA_AG_NUM_LOCAL_HF_IND 2 111 #endif 112 113 #define BTA_AG_HANDLE_SCO_NO_CHANGE 0xFFFF 114 115 /* AG result codes used with BTA_AgResult */ 116 #define BTA_AG_SPK_RES 0 /* Update speaker volume */ 117 #define BTA_AG_MIC_RES 1 /* Update microphone volume */ 118 #define BTA_AG_INBAND_RING_RES 2 /* Update inband ring state */ 119 #define BTA_AG_CIND_RES 3 /* Send indicator response for AT+CIND */ 120 #define BTA_AG_BINP_RES 4 /* Send phone number for voice tag for AT+BINP */ 121 #define BTA_AG_IND_RES 5 /* Update an indicator value */ 122 #define BTA_AG_BVRA_RES 6 /* Update voice recognition state */ 123 #define BTA_AG_CNUM_RES 7 /* Send subscriber number response for AT+CNUM */ 124 #define BTA_AG_BTRH_RES 8 /* Send CCAP incoming call hold */ 125 #define BTA_AG_CLCC_RES 9 /* Query list of calls */ 126 #define BTA_AG_COPS_RES 10 /* Read network operator */ 127 #define BTA_AG_IN_CALL_RES 11 /* Indicate incoming phone call */ 128 #define BTA_AG_IN_CALL_CONN_RES 12 /* Incoming phone call connected */ 129 #define BTA_AG_CALL_WAIT_RES 13 /* Call waiting notification */ 130 #define BTA_AG_OUT_CALL_ORIG_RES 14 /* Outgoing phone call origination */ 131 132 /* Outgoing phone call alerting remote party */ 133 #define BTA_AG_OUT_CALL_ALERT_RES 15 134 #define BTA_AG_OUT_CALL_CONN_RES 16 /* Outgoing phone call connected */ 135 136 /* Incoming/outgoing 3-way canceled before connected */ 137 #define BTA_AG_CALL_CANCEL_RES 17 138 #define BTA_AG_END_CALL_RES 18 /* End call */ 139 #define BTA_AG_IN_CALL_HELD_RES 19 /* Incoming call held */ 140 #define BTA_AG_UNAT_RES 20 /* Response to unknown AT command event */ 141 #define BTA_AG_MULTI_CALL_RES 21 /* SLC at three way call */ 142 #define BTA_AG_BIND_RES 22 /* Activate/Deactivate HF indicator */ 143 144 typedef uint8_t tBTA_AG_RES; 145 146 /* HFP peer features */ 147 #define BTA_AG_PEER_FEAT_ECNR 0x0001 /* Echo cancellation/noise reduction */ 148 #define BTA_AG_PEER_FEAT_3WAY 0x0002 /* Call waiting and three-way calling */ 149 #define BTA_AG_PEER_FEAT_CLI 0x0004 /* Caller ID presentation capability */ 150 #define BTA_AG_PEER_FEAT_VREC 0x0008 /* Voice recognition activation */ 151 #define BTA_AG_PEER_FEAT_VOL 0x0010 /* Remote volume control */ 152 #define BTA_AG_PEER_FEAT_ECS 0x0020 /* Enhanced Call Status */ 153 #define BTA_AG_PEER_FEAT_ECC 0x0040 /* Enhanced Call Control */ 154 #define BTA_AG_PEER_FEAT_CODEC 0x0080 /* Codec Negotiation */ 155 #define BTA_AG_PEER_FEAT_HF_IND 0x0100 /* HF Indicators */ 156 #define BTA_AG_PEER_FEAT_ESCO 0x0200 /* eSCO S4 (and T2) setting supported */ 157 158 /* Proprietary features: using bits after 12 */ 159 160 /* Pass unknown AT command responses to application */ 161 #define BTA_AG_PEER_FEAT_UNAT 0x1000 162 #define BTA_AG_PEER_FEAT_VOIP 0x2000 /* VoIP call */ 163 164 typedef uint16_t tBTA_AG_PEER_FEAT; 165 166 /* HFP peer supported codec masks */ 167 // TODO(google) This should use common definitions 168 #define BTA_AG_CODEC_NONE BTM_SCO_CODEC_NONE 169 #define BTA_AG_CODEC_CVSD BTM_SCO_CODEC_CVSD /* CVSD */ 170 #define BTA_AG_CODEC_MSBC BTM_SCO_CODEC_MSBC /* mSBC */ 171 typedef uint16_t tBTA_AG_PEER_CODEC; 172 173 /* HFP errcode - Set when BTA_AG_OK_ERROR is returned in 'ok_flag' */ 174 #define BTA_AG_ERR_PHONE_FAILURE 0 /* Phone Failure */ 175 #define BTA_AG_ERR_NO_CONN_PHONE 1 /* No connection to phone */ 176 #define BTA_AG_ERR_OP_NOT_ALLOWED 3 /* Operation not allowed */ 177 #define BTA_AG_ERR_OP_NOT_SUPPORTED 4 /* Operation not supported */ 178 #define BTA_AG_ERR_PHSIM_PIN_REQ 5 /* PH-SIM PIN required */ 179 #define BTA_AG_ERR_SIM_NOT_INSERTED 10 /* SIM not inserted */ 180 #define BTA_AG_ERR_SIM_PIN_REQ 11 /* SIM PIN required */ 181 #define BTA_AG_ERR_SIM_PUK_REQ 12 /* SIM PUK required */ 182 #define BTA_AG_ERR_SIM_FAILURE 13 /* SIM failure */ 183 #define BTA_AG_ERR_SIM_BUSY 14 /* SIM busy */ 184 #define BTA_AG_ERR_INCORRECT_PWD 16 /* Incorrect password */ 185 #define BTA_AG_ERR_SIM_PIN2_REQ 17 /* SIM PIN2 required */ 186 #define BTA_AG_ERR_SIM_PUK2_REQ 18 /* SIM PUK2 required */ 187 #define BTA_AG_ERR_MEMORY_FULL 20 /* Memory full */ 188 #define BTA_AG_ERR_INVALID_INDEX 21 /* Invalid index */ 189 #define BTA_AG_ERR_MEMORY_FAILURE 23 /* Memory failure */ 190 #define BTA_AG_ERR_TEXT_TOO_LONG 24 /* Text string too long */ 191 #define BTA_AG_ERR_INV_CHAR_IN_TSTR 25 /* Invalid characters in text string */ 192 #define BTA_AG_ERR_DSTR_TOO_LONG 26 /* Dial string too long */ 193 #define BTA_AG_ERR_INV_CHAR_IN_DSTR 27 /* Invalid characters in dial string */ 194 #define BTA_AG_ERR_NO_NETWORK_SERV 30 /* No network service */ 195 #define BTA_AG_ERR_NETWORK_TIME_OUT 31 /* Network timeout */ 196 /* Network not allowed - emergency service only */ 197 #define BTA_AG_ERR_NO_NET_EMG_ONLY 32 198 /* AG cannot create simultaneous VoIP and CS calls */ 199 #define BTA_AG_ERR_VOIP_CS_CALLS 33 200 #define BTA_AG_ERR_NOT_FOR_VOIP 34 /* Not supported on this call type(VoIP) */ 201 #define BTA_AG_ERR_SIP_RESP_CODE 35 /* SIP 3 digit response code */ 202 203 #if 0 /* Not Used in Bluetooth HFP 1.5 Specification */ 204 #define BTA_AG_ERR_PHADAP_LNK_RES 2 /* Phone-adapter link reserved */ 205 #define BTA_AG_ERR_PHFSIM_PIN_REQ 6 /* PH-FSIM PIN required */ 206 #define BTA_AG_ERR_PHFSIM_PUK_REQ 7 /* PH-FSIM PUK required */ 207 #define BTA_AG_ERR_SIM_WRONG 15 /* SIM wrong */ 208 #define BTA_AG_ERR_NOT_FOUND 22 /* Not found */ 209 #define BTA_AG_ERR_NETWORK_TIMEOUT 31 /* Network timeout */ 210 #define BTA_AG_ERR_NET_PIN_REQ 40 /* Network personalization PIN required */ 211 #define BTA_AG_ERR_NET_PUK_REQ 41 /* Network personalization PUK required */ 212 /* Network subset personalization PIN required */ 213 #define BTA_AG_ERR_SUBSET_PIN_REQ 42 214 /* Network subset personalization PUK required */ 215 #define BTA_AG_ERR_SUBSET_PUK_REQ 43 216 /* Service provider personalization PIN required */ 217 #define BTA_AG_ERR_SERVPRO_PIN_REQ 44 218 /* Service provider personalization PUK required */ 219 #define BTA_AG_ERR_SERVPRO_PUK_REQ 45 220 /* Corporate personalization PIN required */ 221 #define BTA_AG_ERR_CORP_PIN_REQ 46 222 /* Corporate personalization PUK required */ 223 #define BTA_AG_ERR_CORP_PUK_REQ 47 224 #define BTA_AG_ERR_UNKNOWN 100 /* Unknown error */ 225 226 /* GPRS-related errors */ 227 #define BTA_AG_ERR_ILL_MS 103 /* Illegal MS (#3) */ 228 #define BTA_AG_ERR_ILL_ME 106 /* Illegal ME (#6) */ 229 #define BTA_AG_ERR_GPRS_NOT_ALLOWED 107 /* GPRS services not allowed (#7) */ 230 #define BTA_AG_ERR_PLMN_NOT_ALLOWED 111 /* PLMN services not allowed (#11) */ 231 #define BTA_AG_ERR_LOC_NOT_ALLOWED 112 /* Location area not allowed (#12) */ 232 /* Roaming not allowed in this location area (#13) */ 233 #define BTA_AG_ERR_ROAM_NOT_ALLOWED 113 234 /* Errors related to a failure to Activate a Context */ 235 #define BTA_AG_ERR_OPT_NOT_SUPP 132 /* Service option not supported (#32) */ 236 /* Requested service option not subscribed (#33) */ 237 #define BTA_AG_ERR_OPT_NOT_SUBSCR 133 238 /* Service option temporarily out of order (#34) */ 239 #define BTA_AG_ERR_OPT_OUT_OF_ORDER 134 240 #define BTA_AG_ERR_PDP_AUTH_FAILURE 149 /* PDP authentication failure */ 241 /* Other GPRS errors */ 242 #define BTA_AG_ERR_INV_MOBILE_CLASS 150 /* Invalid mobile class */ 243 #define BTA_AG_ERR_UNSPEC_GPRS_ERR 148 /* Unspecified GPRS error */ 244 #endif /* Unused error codes */ 245 246 /* HFP result data 'ok_flag' */ 247 #define BTA_AG_OK_CONTINUE 0 /* Send out response (more responses coming) */ 248 #define BTA_AG_OK_DONE 1 /* Send out response followed by OK (finished) */ 249 #define BTA_AG_OK_ERROR 2 /* Error response */ 250 251 /* BTRH values */ 252 #define BTA_AG_BTRH_SET_HOLD 0 /* Put incoming call on hold */ 253 #define BTA_AG_BTRH_SET_ACC 1 /* Accept incoming call on hold */ 254 #define BTA_AG_BTRH_SET_REJ 2 /* Reject incoming call on hold */ 255 #define BTA_AG_BTRH_READ 3 /* Read the current value */ 256 #define BTA_AG_BTRH_NO_RESP 4 /* Not in RH States (reply to read) */ 257 258 /* ASCII character string of arguments to the AT command or result */ 259 #ifndef BTA_AG_AT_MAX_LEN 260 #define BTA_AG_AT_MAX_LEN 256 261 #endif 262 263 /* data associated with BTA_AG_IND_RES */ 264 typedef struct { 265 uint16_t id; 266 uint16_t value; 267 bool on_demand; 268 } tBTA_AG_IND; 269 270 /* data type for BTA_AgResult() */ 271 typedef struct { 272 char str[BTA_AG_AT_MAX_LEN + 1]; 273 tBTA_AG_IND ind; 274 uint16_t num; 275 uint16_t audio_handle; 276 uint16_t errcode; /* Valid only if 'ok_flag' is set to BTA_AG_OK_ERROR */ 277 uint8_t 278 ok_flag; /* Indicates if response is finished, and if error occurred */ 279 bool state; 280 } tBTA_AG_RES_DATA; 281 282 /* AG callback events */ 283 #define BTA_AG_ENABLE_EVT 0 /* AG enabled */ 284 #define BTA_AG_REGISTER_EVT 1 /* AG registered */ 285 #define BTA_AG_OPEN_EVT 2 /* AG connection open */ 286 #define BTA_AG_CLOSE_EVT 3 /* AG connection closed */ 287 #define BTA_AG_CONN_EVT 4 /* Service level connection opened */ 288 #define BTA_AG_AUDIO_OPEN_EVT 5 /* Audio connection open */ 289 #define BTA_AG_AUDIO_CLOSE_EVT 6 /* Audio connection closed */ 290 #define BTA_AG_SPK_EVT 7 /* Speaker volume changed */ 291 #define BTA_AG_MIC_EVT 8 /* Microphone volume changed */ 292 #define BTA_AG_AT_CKPD_EVT 9 /* CKPD from the HS */ 293 #define BTA_AG_DISABLE_EVT 30 /* AG disabled */ 294 #define BTA_AG_WBS_EVT 31 /* SCO codec info */ 295 /* Values below are for HFP only */ 296 #define BTA_AG_AT_A_EVT 10 /* Answer a call */ 297 #define BTA_AG_AT_D_EVT 11 /* Place a call using number or memory dial */ 298 #define BTA_AG_AT_CHLD_EVT 12 /* Call hold */ 299 #define BTA_AG_AT_CHUP_EVT 13 /* Hang up a call */ 300 #define BTA_AG_AT_CIND_EVT 14 /* Read indicator settings */ 301 #define BTA_AG_AT_VTS_EVT 15 /* Transmit DTMF tone */ 302 #define BTA_AG_AT_BINP_EVT 16 /* Retrieve number from voice tag */ 303 #define BTA_AG_AT_BLDN_EVT 17 /* Place call to last dialed number */ 304 #define BTA_AG_AT_BVRA_EVT 18 /* Enable/disable voice recognition */ 305 #define BTA_AG_AT_NREC_EVT 19 /* Disable echo canceling */ 306 #define BTA_AG_AT_CNUM_EVT 20 /* Retrieve subscriber number */ 307 #define BTA_AG_AT_BTRH_EVT 21 /* CCAP-style incoming call hold */ 308 #define BTA_AG_AT_CLCC_EVT 22 /* Query list of current calls */ 309 #define BTA_AG_AT_COPS_EVT 23 /* Query list of current calls */ 310 #define BTA_AG_AT_UNAT_EVT 24 /* Unknown AT command */ 311 #define BTA_AG_AT_CBC_EVT 25 /* Battery Level report from HF */ 312 #define BTA_AG_AT_BAC_EVT 26 /* avablable codec */ 313 #define BTA_AG_AT_BCS_EVT 27 /* Codec select */ 314 #define BTA_AG_AT_BIND_EVT 28 /* HF indicator */ 315 #define BTA_AG_AT_BIEV_EVT 29 /* HF indicator updates from peer */ 316 317 typedef uint8_t tBTA_AG_EVT; 318 319 /* data associated with most non-AT events */ 320 typedef struct { 321 uint16_t handle; 322 uint8_t app_id; 323 tBTA_AG_STATUS status; 324 } tBTA_AG_HDR; 325 326 /* data associated with BTA_AG_REGISTER_EVT */ 327 typedef struct { 328 tBTA_AG_HDR hdr; 329 tBTA_AG_STATUS status; 330 } tBTA_AG_REGISTER; 331 332 /* data associated with BTA_AG_OPEN_EVT */ 333 typedef struct { 334 tBTA_AG_HDR hdr; 335 RawAddress bd_addr; 336 tBTA_SERVICE_ID service_id; 337 tBTA_AG_STATUS status; 338 } tBTA_AG_OPEN; 339 340 /* data associated with BTA_AG_CLOSE_EVT */ 341 typedef struct { 342 tBTA_AG_HDR hdr; 343 RawAddress bd_addr; 344 } tBTA_AG_CLOSE; 345 346 /* data associated with BTA_AG_CONN_EVT */ 347 typedef struct { 348 tBTA_AG_HDR hdr; 349 tBTA_AG_PEER_FEAT peer_feat; 350 RawAddress bd_addr; 351 tBTA_AG_PEER_CODEC peer_codec; 352 } tBTA_AG_CONN; 353 354 /* data associated with AT command event */ 355 typedef struct { 356 tBTA_AG_HDR hdr; 357 RawAddress bd_addr; 358 char str[BTA_AG_AT_MAX_LEN + 1]; 359 uint16_t num; 360 uint8_t idx; /* call number used by CLCC and CHLD */ 361 uint16_t lidx; /* long index, ex, HF indicator */ 362 } tBTA_AG_VAL; 363 364 /* union of data associated with AG callback */ 365 typedef union { 366 tBTA_AG_HDR hdr; 367 tBTA_AG_REGISTER reg; 368 tBTA_AG_OPEN open; 369 tBTA_AG_CLOSE close; 370 tBTA_AG_CONN conn; 371 tBTA_AG_VAL val; 372 } tBTA_AG; 373 374 /* AG callback */ 375 typedef void(tBTA_AG_CBACK)(tBTA_AG_EVT event, tBTA_AG* p_data); 376 377 /* indicator constants HFP 1.1 and later */ 378 #define BTA_AG_IND_CALL 1 /* position of call indicator */ 379 #define BTA_AG_IND_CALLSETUP 2 /* position of callsetup indicator */ 380 #define BTA_AG_IND_SERVICE 3 /* position of service indicator */ 381 382 /* indicator constants HFP 1.5 and later */ 383 #define BTA_AG_IND_SIGNAL 4 /* position of signal strength indicator */ 384 #define BTA_AG_IND_ROAM 5 /* position of roaming indicator */ 385 #define BTA_AG_IND_BATTCHG 6 /* position of battery charge indicator */ 386 #define BTA_AG_IND_CALLHELD 7 /* position of callheld indicator */ 387 #define BTA_AG_IND_BEARER 8 /* position of bearer indicator */ 388 389 /* call indicator values */ 390 #define BTA_AG_CALL_INACTIVE 0 /* Phone call inactive */ 391 #define BTA_AG_CALL_ACTIVE 1 /* Phone call active */ 392 393 /* callsetup indicator values */ 394 #define BTA_AG_CALLSETUP_NONE 0 /* Not currently in call set up */ 395 #define BTA_AG_CALLSETUP_INCOMING 1 /* Incoming call process ongoing */ 396 #define BTA_AG_CALLSETUP_OUTGOING 2 /* Outgoing call set up is ongoing */ 397 /* Remote party being alerted in an outgoing call */ 398 #define BTA_AG_CALLSETUP_ALERTING 3 399 400 /* service indicator values */ 401 #define BTA_AG_SERVICE_NONE 0 /* Neither CS nor VoIP service is available */ 402 #define BTA_AG_SERVICE_CS 1 /* Only CS service is available */ 403 #define BTA_AG_SERVICE_VOIP 2 /* Only VoIP service is available */ 404 #define BTA_AG_SERVICE_CS_VOIP 3 /* Both CS and VoIP services available */ 405 406 /* callheld indicator values */ 407 #define BTA_AG_CALLHELD_INACTIVE 0 /* No held calls */ 408 #define BTA_AG_CALLHELD_ACTIVE 1 /* Call held and call active */ 409 #define BTA_AG_CALLHELD_NOACTIVE 2 /* Call held and no call active */ 410 411 /* signal strength indicator values */ 412 #define BTA_AG_ROAMING_INACTIVE 0 /* Phone call inactive */ 413 #define BTA_AG_ROAMING_ACTIVE 1 /* Phone call active */ 414 415 /* bearer indicator values */ 416 #define BTA_AG_BEARER_WLAN 0 /* WLAN */ 417 #define BTA_AG_BEARER_BLUETOOTH 1 /* Bluetooth */ 418 #define BTA_AG_BEARER_WIRED 2 /* Wired */ 419 #define BTA_AG_BEARER_2G3G 3 /* 2G 3G */ 420 #define BTA_AG_BEARER_WIMAX 4 /* WIMAX */ 421 #define BTA_AG_BEARER_RES1 5 /* Reserved */ 422 #define BTA_AG_BEARER_RES2 6 /* Reserved */ 423 #define BTA_AG_BEARER_RES3 7 /* Reserved */ 424 425 /* type for HF indicator */ 426 typedef struct { 427 uint16_t ind_id; 428 bool is_supported; 429 bool is_enable; 430 uint32_t ind_min_val; 431 uint32_t ind_max_val; 432 } tBTA_AG_HF_IND; 433 434 /* AG configuration structure */ 435 typedef struct { 436 const char* cind_info; 437 const char* bind_info; 438 uint8_t num_local_hf_ind; 439 int32_t conn_tout; 440 uint16_t sco_pkt_types; 441 const char* chld_val_ecc; 442 const char* chld_val; 443 } tBTA_AG_CFG; 444 445 /***************************************************************************** 446 * External Function Declarations 447 ****************************************************************************/ 448 449 /******************************************************************************* 450 * 451 * Function BTA_AgEnable 452 * 453 * Description Enable the audio gateway service. When the enable 454 * operation is complete the callback function will be 455 * called with a BTA_AG_ENABLE_EVT. This function must 456 * be called before other function in the AG API are 457 * called. 458 * 459 * Returns BTA_SUCCESS if OK, BTA_FAILURE otherwise. 460 * 461 ******************************************************************************/ 462 tBTA_STATUS BTA_AgEnable(tBTA_AG_PARSE_MODE parse_mode, tBTA_AG_CBACK* p_cback); 463 464 /******************************************************************************* 465 * 466 * Function BTA_AgDisable 467 * 468 * Description Disable the audio gateway service 469 * 470 * 471 * Returns void 472 * 473 ******************************************************************************/ 474 void BTA_AgDisable(void); 475 476 /******************************************************************************* 477 * 478 * Function BTA_AgRegister 479 * 480 * Description Register an Audio Gateway service. 481 * 482 * 483 * Returns void 484 * 485 ******************************************************************************/ 486 void BTA_AgRegister(tBTA_SERVICE_MASK services, tBTA_SEC sec_mask, 487 tBTA_AG_FEAT features, const char* p_service_names[], 488 uint8_t app_id); 489 490 /******************************************************************************* 491 * 492 * Function BTA_AgDeregister 493 * 494 * Description Deregister an audio gateway service. 495 * 496 * 497 * Returns void 498 * 499 ******************************************************************************/ 500 void BTA_AgDeregister(uint16_t handle); 501 502 /******************************************************************************* 503 * 504 * Function BTA_AgOpen 505 * 506 * Description Opens a connection to a headset or hands-free device. 507 * When connection is open callback function is called 508 * with a BTA_AG_OPEN_EVT. Only the data connection is 509 * opened. The audio connection is not opened. 510 * 511 * 512 * Returns void 513 * 514 ******************************************************************************/ 515 void BTA_AgOpen(uint16_t handle, const RawAddress& bd_addr, tBTA_SEC sec_mask, 516 tBTA_SERVICE_MASK services); 517 518 /******************************************************************************* 519 * 520 * Function BTA_AgClose 521 * 522 * Description Close the current connection to a headset or a handsfree 523 * Any current audio connection will also be closed 524 * 525 * 526 * Returns void 527 * 528 ******************************************************************************/ 529 void BTA_AgClose(uint16_t handle); 530 531 /******************************************************************************* 532 * 533 * Function BTA_AgAudioOpen 534 * 535 * Description Opens an audio connection to the currently connected 536 * headset or hnadsfree 537 * 538 * 539 * Returns void 540 * 541 ******************************************************************************/ 542 void BTA_AgAudioOpen(uint16_t handle); 543 544 /******************************************************************************* 545 * 546 * Function BTA_AgAudioClose 547 * 548 * Description Close the currently active audio connection to a headset 549 * or hnadsfree. The data connection remains open 550 * 551 * 552 * Returns void 553 * 554 ******************************************************************************/ 555 void BTA_AgAudioClose(uint16_t handle); 556 557 /******************************************************************************* 558 * 559 * Function BTA_AgResult 560 * 561 * Description Send an AT result code to a headset or hands-free device. 562 * This function is only used when the AG parse mode is set 563 * to BTA_AG_PARSE. 564 * 565 * 566 * Returns void 567 * 568 ******************************************************************************/ 569 void BTA_AgResult(uint16_t handle, tBTA_AG_RES result, 570 tBTA_AG_RES_DATA* p_data); 571 572 /******************************************************************************* 573 * 574 * Function BTA_AgSetCodec 575 * 576 * Description Specify the codec type to be used for the subsequent 577 * audio connection. 578 * 579 * 580 * 581 * Returns void 582 * 583 ******************************************************************************/ 584 void BTA_AgSetCodec(uint16_t handle, tBTA_AG_PEER_CODEC codec); 585 586 void BTA_AgSetScoAllowed(bool value); 587 588 #endif /* BTA_AG_API_H */ 589
