1 /* 2 * Qualcomm Atheros OUI and vendor specific assignments 3 * Copyright (c) 2014-2017, Qualcomm Atheros, Inc. 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9 #ifndef QCA_VENDOR_H 10 #define QCA_VENDOR_H 11 12 /* 13 * This file is a registry of identifier assignments from the Qualcomm Atheros 14 * OUI 00:13:74 for purposes other than MAC address assignment. New identifiers 15 * can be assigned through normal review process for changes to the upstream 16 * hostap.git repository. 17 */ 18 19 #define OUI_QCA 0x001374 20 21 /** 22 * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs 23 */ 24 enum qca_radiotap_vendor_ids { 25 QCA_RADIOTAP_VID_WLANTEST = 0, 26 }; 27 28 /** 29 * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers 30 * 31 * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0 32 * 33 * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event 34 * 35 * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use 36 * internal BSS-selection. This command uses 37 * @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy 38 * for the current connection (i.e., changes policy set by the nl80211 39 * Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be 40 * included to indicate which BSS to use in case roaming is disabled. 41 * 42 * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency 43 * ranges to avoid to reduce issues due to interference or internal 44 * co-existence information in the driver. The event data structure is 45 * defined in struct qca_avoid_freq_list. 46 * 47 * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support 48 * for DFS offloading. 49 * 50 * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass 51 * NAN Request/Response and NAN Indication messages. These messages are 52 * interpreted between the framework and the firmware component. 53 * 54 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be 55 * used to configure PMK to the driver even when not connected. This can 56 * be used to request offloading of key management operations. Only used 57 * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. 58 * 59 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of 60 * NL80211_CMD_ROAM event with optional attributes including information 61 * from offloaded key management operation. Uses 62 * enum qca_wlan_vendor_attr_roam_auth attributes. Only used 63 * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. 64 * 65 * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to 66 * invoke the ACS function in device and pass selected channels to 67 * hostapd. 68 * 69 * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features 70 * supported by the driver. enum qca_wlan_vendor_features defines 71 * the possible features. 72 * 73 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver, 74 * which supports DFS offloading, to indicate a channel availability check 75 * start. 76 * 77 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver, 78 * which supports DFS offloading, to indicate a channel availability check 79 * completion. 80 * 81 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver, 82 * which supports DFS offloading, to indicate that the channel availability 83 * check aborted, no change to the channel status. 84 * 85 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by 86 * driver, which supports DFS offloading, to indicate that the 87 * Non-Occupancy Period for this channel is over, channel becomes usable. 88 * 89 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver, 90 * which supports DFS offloading, to indicate a radar pattern has been 91 * detected. The channel is now unusable. 92 * 93 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to 94 * start the P2P Listen offload function in device and pass the listen 95 * channel, period, interval, count, device types, and vendor specific 96 * information elements to the device driver and firmware. 97 * Uses the attributes defines in 98 * enum qca_wlan_vendor_attr_p2p_listen_offload. 99 * 100 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to 101 * indicate stop request/response of the P2P Listen offload function in 102 * device. As an event, it indicates either the feature stopped after it 103 * was already running or feature has actually failed to start. Uses the 104 * attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload. 105 * 106 * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts 107 * beaconing, this sub command provides the driver, the frequencies on the 108 * 5 GHz band to check for any radar activity. Driver selects one channel 109 * from this priority list provided through 110 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts 111 * to check for radar activity on it. If no radar activity is detected 112 * during the channel availability check period, driver internally switches 113 * to the selected frequency of operation. If the frequency is zero, driver 114 * internally selects a channel. The status of this conditional switch is 115 * indicated through an event using the same sub command through 116 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are 117 * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch. 118 * 119 * @QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND: Set GPIO pins. This uses the 120 * attributes defined in enum qca_wlan_gpio_attr. 121 * 122 * @QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY: Fetch hardware capabilities. 123 * This uses @QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY to indicate which 124 * capabilities are to be fetched and other 125 * enum qca_wlan_vendor_attr_get_hw_capability attributes to return the 126 * requested capabilities. 127 * 128 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension. 129 * enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this 130 * command and event. 131 * 132 * @QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA: Get capabilities for 133 * indoor location features. Capabilities are reported in 134 * QCA_WLAN_VENDOR_ATTR_LOC_CAPA. 135 * 136 * @QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION: Start an FTM 137 * (fine timing measurement) session with one or more peers. 138 * Specify Session cookie in QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE and 139 * peer information in QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS. 140 * On success, 0 or more QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT 141 * events will be reported, followed by 142 * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE event to indicate 143 * end of session. 144 * Refer to IEEE P802.11-REVmc/D7.0, 11.24.6 145 * 146 * @QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION: Abort a running session. 147 * A QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE will be reported with 148 * status code indicating session was aborted. 149 * 150 * @QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT: Event with measurement 151 * results for one peer. Results are reported in 152 * QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS. 153 * 154 * @QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE: Event triggered when 155 * FTM session is finished, either successfully or aborted by 156 * request. 157 * 158 * @QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER: Configure FTM responder 159 * mode. QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE specifies whether 160 * to enable or disable the responder. LCI/LCR reports can be 161 * configured with QCA_WLAN_VENDOR_ATTR_FTM_LCI and 162 * QCA_WLAN_VENDOR_ATTR_FTM_LCR. Can be called multiple 163 * times to update the LCI/LCR reports. 164 * 165 * @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS: Perform a standalone AOA (angle of 166 * arrival) measurement with a single peer. Specify peer MAC address in 167 * QCA_WLAN_VENDOR_ATTR_MAC_ADDR and optionally frequency (MHz) in 168 * QCA_WLAN_VENDOR_ATTR_FREQ (if not specified, locate peer in kernel 169 * scan results cache and use the frequency from there). 170 * Also specify measurement type in QCA_WLAN_VENDOR_ATTR_AOA_TYPE. 171 * Measurement result is reported in 172 * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT event. 173 * 174 * @QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS: Abort an AOA measurement. Specify 175 * peer MAC address in QCA_WLAN_VENDOR_ATTR_MAC_ADDR. 176 * 177 * @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT: Event that reports 178 * the AOA measurement result. 179 * Peer MAC address reported in QCA_WLAN_VENDOR_ATTR_MAC_ADDR. 180 * success/failure status is reported in 181 * QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS. 182 * Measurement data is reported in QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT. 183 * The antenna array(s) used in the measurement are reported in 184 * QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK. 185 * 186 * @QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST: Encrypt/decrypt the given 187 * data as per the given parameters. 188 * 189 * @QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI: Get antenna RSSI value for a 190 * specific chain. 191 * 192 * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG: Get low level 193 * configuration for a DMG RF sector. Specify sector index in 194 * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in 195 * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and RF modules 196 * to return sector information for in 197 * QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK. Returns sector configuration 198 * in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG. Also return the 199 * exact time where information was captured in 200 * QCA_WLAN_VENDOR_ATTR_TSF. 201 * 202 * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG: Set low level 203 * configuration for a DMG RF sector. Specify sector index in 204 * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in 205 * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and sector configuration 206 * for one or more DMG RF modules in 207 * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG. 208 * 209 * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR: Get selected 210 * DMG RF sector for a station. This is the sector that the HW 211 * will use to communicate with the station. Specify the MAC address 212 * of associated station/AP/PCP in QCA_WLAN_VENDOR_ATTR_MAC_ADDR (not 213 * needed for unassociated station). Specify sector type to return in 214 * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE. Returns the selected 215 * sector index in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX. 216 * Also return the exact time where the information was captured 217 * in QCA_WLAN_VENDOR_ATTR_TSF. 218 * 219 * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR: Set the 220 * selected DMG RF sector for a station. This is the sector that 221 * the HW will use to communicate with the station. 222 * Specify the MAC address of associated station/AP/PCP in 223 * QCA_WLAN_VENDOR_ATTR_MAC_ADDR, the sector type to select in 224 * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and the sector index 225 * in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX. 226 * The selected sector will be locked such that it will not be 227 * modified like it normally does (for example when station 228 * moves around). To unlock the selected sector for a station 229 * pass the special value 0xFFFF in the sector index. To unlock 230 * all connected stations also pass a broadcast MAC address. 231 * 232 * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior 233 * in the host driver. The different TDLS configurations are defined 234 * by the attributes in enum qca_wlan_vendor_attr_tdls_configuration. 235 * 236 * @QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES: Query device IEEE 802.11ax HE 237 * capabilities. The response uses the attributes defined in 238 * enum qca_wlan_vendor_attr_get_he_capabilities. 239 * 240 * @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: Abort an ongoing vendor scan that was 241 * started with QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN. This command 242 * carries the scan cookie of the corresponding scan request. The scan 243 * cookie is represented by QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE. 244 * 245 * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS: Set the Specific 246 * Absorption Rate (SAR) power limits. A critical regulation for 247 * FCC compliance, OEMs require methods to set SAR limits on TX 248 * power of WLAN/WWAN. enum qca_vendor_attr_sar_limits 249 * attributes are used with this command. 250 * 251 * @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: This command/event is used by the 252 * host driver for offloading the implementation of Auto Channel Selection 253 * (ACS) to an external user space entity. This interface is used as the 254 * event from the host driver to the user space entity and also as the 255 * request from the user space entity to the host driver. The event from 256 * the host driver is used by the user space entity as an indication to 257 * start the ACS functionality. The attributes used by this event are 258 * represented by the enum qca_wlan_vendor_attr_external_acs_event. 259 * User space entity uses the same interface to inform the host driver with 260 * selected channels after the ACS operation using the attributes defined 261 * by enum qca_wlan_vendor_attr_external_acs_channels. 262 * 263 * @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE: Vendor event carrying the 264 * requisite information leading to a power save failure. The information 265 * carried as part of this event is represented by the 266 * enum qca_attr_chip_power_save_failure attributes. 267 * 268 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET: Start/Stop the NUD statistics 269 * collection. Uses attributes defined in enum qca_attr_nud_stats_set. 270 * 271 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET: Get the NUD statistics. These 272 * statistics are represented by the enum qca_attr_nud_stats_get 273 * attributes. 274 * 275 * @QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS: Sub-command to fetch 276 * the BSS transition status, whether accept or reject, for a list of 277 * candidate BSSIDs provided by the userspace. This uses the vendor 278 * attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and 279 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. The userspace shall specify 280 * the attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and an 281 * array of QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID nested in 282 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO in the request. In the response 283 * the driver shall specify array of 284 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID and 285 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS pairs nested in 286 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. 287 * 288 * @QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL: Set the trace level for a 289 * specific QCA module. The trace levels are represented by 290 * enum qca_attr_trace_level attributes. 291 */ 292 enum qca_nl80211_vendor_subcmds { 293 QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, 294 QCA_NL80211_VENDOR_SUBCMD_TEST = 1, 295 /* subcmds 2..8 not yet allocated */ 296 QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9, 297 QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10, 298 QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11, 299 QCA_NL80211_VENDOR_SUBCMD_NAN = 12, 300 QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13, 301 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14, 302 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15, 303 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16, 304 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17, 305 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18, 306 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19, 307 QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20, 308 QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21, 309 QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22, 310 QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23, 311 QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24, 312 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25, 313 QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26, 314 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27, 315 QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28, 316 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29, 317 QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30, 318 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31, 319 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32, 320 QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33, 321 QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34, 322 QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35, 323 QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36, 324 QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37, 325 QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38, 326 QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39, 327 QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40, 328 QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41, 329 QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42, 330 /* 43..49 - reserved for QCA */ 331 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50, 332 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51, 333 QCA_NL80211_VENDOR_SUBCMD_APFIND = 52, 334 /* 53 - reserved - was used by QCA, but not in use anymore */ 335 QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54, 336 QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55, 337 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56, 338 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57, 339 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58, 340 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59, 341 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60, 342 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61, 343 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62, 344 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63, 345 QCA_NL80211_VENDOR_SUBCMD_ROAM = 64, 346 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST = 65, 347 QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SSID_HOTLIST = 66, 348 QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_FOUND = 67, 349 QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_LOST = 68, 350 QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST = 69, 351 QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST = 70, 352 QCA_NL80211_VENDOR_SUBCMD_PNO_RESET_PASSPOINT_LIST = 71, 353 QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND = 72, 354 QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND = 73, 355 /* Wi-Fi configuration subcommands */ 356 QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74, 357 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75, 358 /* 76-90 - reserved for QCA */ 359 QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91, 360 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92, 361 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93, 362 QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94, 363 QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95, 364 QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96, 365 QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97, 366 QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98, 367 QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99, 368 QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100, 369 QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101, 370 QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102, 371 QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103, 372 QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104, 373 QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105, 374 QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106, 375 QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107, 376 QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108, 377 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109, 378 /* 110..114 - reserved for QCA */ 379 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115, 380 /* 116..117 - reserved for QCA */ 381 QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118, 382 QCA_NL80211_VENDOR_SUBCMD_TSF = 119, 383 QCA_NL80211_VENDOR_SUBCMD_WISA = 120, 384 /* 121 - reserved for QCA */ 385 QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122, 386 QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123, 387 QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124, 388 QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125, 389 QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126, 390 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127, 391 /* FTM/indoor location subcommands */ 392 QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128, 393 QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129, 394 QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130, 395 QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131, 396 QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132, 397 QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133, 398 QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134, 399 QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135, 400 QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136, 401 QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137, 402 QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138, 403 /* DMG low level RF sector operations */ 404 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139, 405 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140, 406 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141, 407 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142, 408 QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143, 409 QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES = 144, 410 QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145, 411 QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146, 412 QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147, 413 QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE = 148, 414 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET = 149, 415 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET = 150, 416 QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS = 151, 417 QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152, 418 }; 419 420 421 enum qca_wlan_vendor_attr { 422 QCA_WLAN_VENDOR_ATTR_INVALID = 0, 423 /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */ 424 QCA_WLAN_VENDOR_ATTR_DFS = 1, 425 /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */ 426 QCA_WLAN_VENDOR_ATTR_NAN = 2, 427 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 428 QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3, 429 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 430 QCA_WLAN_VENDOR_ATTR_IFINDEX = 4, 431 /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined 432 * by enum qca_roaming_policy. */ 433 QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5, 434 QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, 435 /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ 436 QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7, 437 QCA_WLAN_VENDOR_ATTR_TEST = 8, 438 /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ 439 /* Unsigned 32-bit value. */ 440 QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9, 441 /* Unsigned 32-bit value */ 442 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10, 443 /* Unsigned 32-bit value */ 444 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11, 445 /* Unsigned 32-bit value from enum qca_set_band. */ 446 QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12, 447 /* Dummy (NOP) attribute for 64 bit padding */ 448 QCA_WLAN_VENDOR_ATTR_PAD = 13, 449 /* Unique FTM session cookie (Unsigned 64 bit). Specified in 450 * QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in 451 * the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and 452 * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE. 453 */ 454 QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14, 455 /* Indoor location capabilities, returned by 456 * QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA. 457 * see enum qca_wlan_vendor_attr_loc_capa. 458 */ 459 QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15, 460 /* Array of nested attributes containing information about each peer 461 * in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info 462 * for supported attributes for each peer. 463 */ 464 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16, 465 /* Array of nested attributes containing measurement results for 466 * one or more peers, reported by the 467 * QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event. 468 * See enum qca_wlan_vendor_attr_peer_result for list of supported 469 * attributes. 470 */ 471 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17, 472 /* Flag attribute for enabling or disabling responder functionality. */ 473 QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18, 474 /* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 475 * command to specify the LCI report that will be sent by 476 * the responder during a measurement exchange. The format is 477 * defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10. 478 */ 479 QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19, 480 /* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 481 * command to specify the location civic report that will 482 * be sent by the responder during a measurement exchange. 483 * The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13. 484 */ 485 QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20, 486 /* Session/measurement completion status code, 487 * reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and 488 * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT 489 * see enum qca_vendor_attr_loc_session_status. 490 */ 491 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21, 492 /* Initial dialog token used by responder (0 if not specified), 493 * unsigned 8 bit value. 494 */ 495 QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22, 496 /* AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS 497 * and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if 498 * AOA measurements are needed as part of an FTM session. 499 * Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See 500 * enum qca_wlan_vendor_attr_aoa_type. 501 */ 502 QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23, 503 /* A bit mask (unsigned 32 bit value) of antenna arrays used 504 * by indoor location measurements. Refers to the antenna 505 * arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS. 506 */ 507 QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24, 508 /* AOA measurement data. Its contents depends on the AOA measurement 509 * type and antenna array mask: 510 * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values, 511 * phase of the strongest CIR path for each antenna in the measured 512 * array(s). 513 * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16 514 * values, phase and amplitude of the strongest CIR path for each 515 * antenna in the measured array(s). 516 */ 517 QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25, 518 /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 519 * to specify the chain number (unsigned 32 bit value) to inquire 520 * the corresponding antenna RSSI value */ 521 QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26, 522 /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 523 * to report the specific antenna RSSI value (unsigned 32 bit value) */ 524 QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27, 525 /* Frequency in MHz, various uses. Unsigned 32 bit value */ 526 QCA_WLAN_VENDOR_ATTR_FREQ = 28, 527 /* TSF timer value, unsigned 64 bit value. 528 * May be returned by various commands. 529 */ 530 QCA_WLAN_VENDOR_ATTR_TSF = 29, 531 /* DMG RF sector index, unsigned 16 bit number. Valid values are 532 * 0..127 for sector indices or 65535 as special value used to 533 * unlock sector selection in 534 * QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR. 535 */ 536 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX = 30, 537 /* DMG RF sector type, unsigned 8 bit value. One of the values 538 * in enum qca_wlan_vendor_attr_dmg_rf_sector_type. 539 */ 540 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE = 31, 541 /* Bitmask of DMG RF modules for which information is requested. Each 542 * bit corresponds to an RF module with the same index as the bit 543 * number. Unsigned 32 bit number but only low 8 bits can be set since 544 * all DMG chips currently have up to 8 RF modules. 545 */ 546 QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK = 32, 547 /* Array of nested attributes where each entry is DMG RF sector 548 * configuration for a single RF module. 549 * Attributes for each entry are taken from enum 550 * qca_wlan_vendor_attr_dmg_rf_sector_cfg. 551 * Specified in QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG 552 * and returned by QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG. 553 */ 554 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG = 33, 555 /* Used in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command 556 * to report frame aggregation statistics to userspace. 557 */ 558 QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34, 559 QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35, 560 /* Unsigned 8-bit value representing MBO transition reason code as 561 * provided by the AP used by subcommand 562 * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS. This is 563 * specified by the userspace in the request to the driver. 564 */ 565 QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON = 36, 566 /* Array of nested attributes, BSSID and status code, used by subcommand 567 * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS, where each 568 * entry is taken from enum qca_wlan_vendor_attr_btm_candidate_info. 569 * The userspace space specifies the list/array of candidate BSSIDs in 570 * the order of preference in the request. The driver specifies the 571 * status code, for each BSSID in the list, in the response. The 572 * acceptable candidates are listed in the order preferred by the 573 * driver. 574 */ 575 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO = 37, 576 577 /* keep last */ 578 QCA_WLAN_VENDOR_ATTR_AFTER_LAST, 579 QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1, 580 }; 581 582 583 enum qca_roaming_policy { 584 QCA_ROAMING_NOT_ALLOWED, 585 QCA_ROAMING_ALLOWED_WITHIN_ESS, 586 }; 587 588 enum qca_wlan_vendor_attr_roam_auth { 589 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0, 590 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID, 591 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE, 592 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE, 593 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED, 594 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR, 595 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK, 596 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK, 597 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS, 598 /* keep last */ 599 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST, 600 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX = 601 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1 602 }; 603 604 enum qca_wlan_vendor_attr_p2p_listen_offload { 605 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0, 606 /* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one 607 * of the social channels. 608 */ 609 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL, 610 /* A 32-bit unsigned value; the P2P listen offload period (ms). 611 */ 612 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD, 613 /* A 32-bit unsigned value; the P2P listen interval duration (ms). 614 */ 615 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL, 616 /* A 32-bit unsigned value; number of interval times the firmware needs 617 * to run the offloaded P2P listen operation before it stops. 618 */ 619 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT, 620 /* An array of arbitrary binary data with one or more 8-byte values. 621 * The device types include both primary and secondary device types. 622 */ 623 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES, 624 /* An array of unsigned 8-bit characters; vendor information elements. 625 */ 626 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE, 627 /* A 32-bit unsigned value; a control flag to indicate whether listen 628 * results need to be flushed to wpa_supplicant. 629 */ 630 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG, 631 /* A 8-bit unsigned value; reason code for P2P listen offload stop 632 * event. 633 */ 634 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON, 635 /* keep last */ 636 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST, 637 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX = 638 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1 639 }; 640 641 enum qca_wlan_vendor_attr_acs_offload { 642 QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0, 643 QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL, 644 QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL, 645 QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE, 646 QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED, 647 QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED, 648 QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED, 649 QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH, 650 QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST, 651 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL, 652 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL, 653 QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST, 654 /* keep last */ 655 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST, 656 QCA_WLAN_VENDOR_ATTR_ACS_MAX = 657 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1 658 }; 659 660 enum qca_wlan_vendor_acs_hw_mode { 661 QCA_ACS_MODE_IEEE80211B, 662 QCA_ACS_MODE_IEEE80211G, 663 QCA_ACS_MODE_IEEE80211A, 664 QCA_ACS_MODE_IEEE80211AD, 665 QCA_ACS_MODE_IEEE80211ANY, 666 }; 667 668 /** 669 * enum qca_wlan_vendor_features - Vendor device/driver feature flags 670 * 671 * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key 672 * management offload, a mechanism where the station's firmware 673 * does the exchange with the AP to establish the temporal keys 674 * after roaming, rather than having the user space wpa_supplicant do it. 675 * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic 676 * band selection based on channel selection results. 677 * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports 678 * simultaneous off-channel operations. 679 * @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P 680 * Listen offload; a mechanism where the station's firmware takes care of 681 * responding to incoming Probe Request frames received from other P2P 682 * Devices whilst in Listen state, rather than having the user space 683 * wpa_supplicant do it. Information from received P2P requests are 684 * forwarded from firmware to host whenever the host processor wakes up. 685 * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits 686 */ 687 enum qca_wlan_vendor_features { 688 QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0, 689 QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1, 690 QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2, 691 QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3, 692 NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */ 693 }; 694 695 /** 696 * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication 697 * 698 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to 699 * the offloaded data. 700 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded 701 * data. 702 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload 703 * indication. 704 */ 705 enum qca_wlan_vendor_attr_data_offload_ind { 706 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0, 707 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION, 708 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL, 709 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT, 710 711 /* keep last */ 712 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST, 713 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX = 714 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1 715 }; 716 717 enum qca_vendor_attr_get_preferred_freq_list { 718 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID, 719 /* A 32-unsigned value; the interface type/mode for which the preferred 720 * frequency list is requested (see enum qca_iface_type for possible 721 * values); used in GET_PREFERRED_FREQ_LIST command from user-space to 722 * kernel and in the kernel response back to user-space. 723 */ 724 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE, 725 /* An array of 32-unsigned values; values are frequency (MHz); sent 726 * from kernel space to user space. 727 */ 728 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST, 729 /* keep last */ 730 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST, 731 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX = 732 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1 733 }; 734 735 enum qca_vendor_attr_probable_oper_channel { 736 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID, 737 /* 32-bit unsigned value; indicates the connection/iface type likely to 738 * come on this channel (see enum qca_iface_type). 739 */ 740 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE, 741 /* 32-bit unsigned value; the frequency (MHz) of the probable channel */ 742 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ, 743 /* keep last */ 744 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST, 745 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX = 746 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1 747 }; 748 749 enum qca_iface_type { 750 QCA_IFACE_TYPE_STA, 751 QCA_IFACE_TYPE_AP, 752 QCA_IFACE_TYPE_P2P_CLIENT, 753 QCA_IFACE_TYPE_P2P_GO, 754 QCA_IFACE_TYPE_IBSS, 755 QCA_IFACE_TYPE_TDLS, 756 }; 757 758 enum qca_set_band { 759 QCA_SETBAND_AUTO, 760 QCA_SETBAND_5G, 761 QCA_SETBAND_2G, 762 }; 763 764 /** 765 * enum qca_access_policy - Access control policy 766 * 767 * Access control policy is applied on the configured IE 768 * (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE). 769 * To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY. 770 * 771 * @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi connections which match 772 * the specific configuration (IE) set, i.e., allow all the 773 * connections which do not match the configuration. 774 * @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi connections which match 775 * the specific configuration (IE) set, i.e., deny all the 776 * connections which do not match the configuration. 777 */ 778 enum qca_access_policy { 779 QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED, 780 QCA_ACCESS_POLICY_DENY_UNLESS_LISTED, 781 }; 782 783 /** 784 * enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture 785 * @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32) 786 * @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value 787 * @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized 788 * SOC timer value at TSF capture 789 */ 790 enum qca_vendor_attr_tsf_cmd { 791 QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0, 792 QCA_WLAN_VENDOR_ATTR_TSF_CMD, 793 QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE, 794 QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE, 795 QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST, 796 QCA_WLAN_VENDOR_ATTR_TSF_MAX = 797 QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1 798 }; 799 800 /** 801 * enum qca_tsf_operation: TSF driver commands 802 * @QCA_TSF_CAPTURE: Initiate TSF Capture 803 * @QCA_TSF_GET: Get TSF capture value 804 * @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value 805 */ 806 enum qca_tsf_cmd { 807 QCA_TSF_CAPTURE, 808 QCA_TSF_GET, 809 QCA_TSF_SYNC_GET, 810 }; 811 812 /** 813 * enum qca_vendor_attr_wisa_cmd 814 * @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value (u32) 815 * WISA setup vendor commands 816 */ 817 enum qca_vendor_attr_wisa_cmd { 818 QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0, 819 QCA_WLAN_VENDOR_ATTR_WISA_MODE, 820 QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST, 821 QCA_WLAN_VENDOR_ATTR_WISA_MAX = 822 QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1 823 }; 824 825 /* IEEE 802.11 Vendor Specific elements */ 826 827 /** 828 * enum qca_vendor_element_id - QCA Vendor Specific element types 829 * 830 * These values are used to identify QCA Vendor Specific elements. The 831 * payload of the element starts with the three octet OUI (OUI_QCA) and 832 * is followed by a single octet type which is defined by this enum. 833 * 834 * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list. 835 * This element can be used to specify preference order for supported 836 * channels. The channels in this list are in preference order (the first 837 * one has the highest preference) and are described as a pair of 838 * (global) Operating Class and Channel Number (each one octet) fields. 839 * 840 * This extends the standard P2P functionality by providing option to have 841 * more than one preferred operating channel. When this element is present, 842 * it replaces the preference indicated in the Operating Channel attribute. 843 * For supporting other implementations, the Operating Channel attribute is 844 * expected to be used with the highest preference channel. Similarly, all 845 * the channels included in this Preferred channel list element are 846 * expected to be included in the Channel List attribute. 847 * 848 * This vendor element may be included in GO Negotiation Request, P2P 849 * Invitation Request, and Provision Discovery Request frames. 850 * 851 * @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element. 852 * This element can be used for pre-standard publication testing of HE 853 * before P802.11ax draft assigns the element ID. The payload of this 854 * vendor specific element is defined by the latest P802.11ax draft. 855 * Please note that the draft is still work in progress and this element 856 * payload is subject to change. 857 * 858 * @QCA_VENDOR_ELEM_HE_OPER: HE Operation element. 859 * This element can be used for pre-standard publication testing of HE 860 * before P802.11ax draft assigns the element ID. The payload of this 861 * vendor specific element is defined by the latest P802.11ax draft. 862 * Please note that the draft is still work in progress and this element 863 * payload is subject to change. 864 * 865 * @QCA_VENDOR_ELEM_RAPS: RAPS element (OFDMA-based Random Access Parameter Set 866 * element). 867 * This element can be used for pre-standard publication testing of HE 868 * before P802.11ax draft assigns the element ID extension. The payload of 869 * this vendor specific element is defined by the latest P802.11ax draft 870 * (not including the Element ID Extension field). Please note that the 871 * draft is still work in progress and this element payload is subject to 872 * change. 873 * 874 * @QCA_VENDOR_ELEM_MU_EDCA_PARAMS: MU EDCA Parameter Set element. 875 * This element can be used for pre-standard publication testing of HE 876 * before P802.11ax draft assigns the element ID extension. The payload of 877 * this vendor specific element is defined by the latest P802.11ax draft 878 * (not including the Element ID Extension field). Please note that the 879 * draft is still work in progress and this element payload is subject to 880 * change. 881 * 882 * @QCA_VENDOR_ELEM_BSS_COLOR_CHANGE: BSS Color Change Announcement element. 883 * This element can be used for pre-standard publication testing of HE 884 * before P802.11ax draft assigns the element ID extension. The payload of 885 * this vendor specific element is defined by the latest P802.11ax draft 886 * (not including the Element ID Extension field). Please note that the 887 * draft is still work in progress and this element payload is subject to 888 * change. 889 */ 890 enum qca_vendor_element_id { 891 QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0, 892 QCA_VENDOR_ELEM_HE_CAPAB = 1, 893 QCA_VENDOR_ELEM_HE_OPER = 2, 894 QCA_VENDOR_ELEM_RAPS = 3, 895 QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4, 896 QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5, 897 }; 898 899 /** 900 * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes 901 * 902 * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan 903 * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes 904 * with frequencies to be scanned (in MHz) 905 * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned 906 * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported 907 * rates to be included 908 * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests 909 * at non CCK rate in 2GHz band 910 * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags 911 * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the 912 * driver for the specific scan request 913 * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan 914 * request decoded as in enum scan_status 915 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation 916 * scan flag is set 917 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with 918 * randomisation 919 * @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the 920 * specific BSSID to scan for. 921 */ 922 enum qca_wlan_vendor_attr_scan { 923 QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0, 924 QCA_WLAN_VENDOR_ATTR_SCAN_IE = 1, 925 QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES = 2, 926 QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS = 3, 927 QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES = 4, 928 QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE = 5, 929 QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS = 6, 930 QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE = 7, 931 QCA_WLAN_VENDOR_ATTR_SCAN_STATUS = 8, 932 QCA_WLAN_VENDOR_ATTR_SCAN_MAC = 9, 933 QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK = 10, 934 QCA_WLAN_VENDOR_ATTR_SCAN_BSSID = 11, 935 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST, 936 QCA_WLAN_VENDOR_ATTR_SCAN_MAX = 937 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1 938 }; 939 940 /** 941 * enum scan_status - Specifies the valid values the vendor scan attribute 942 * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take 943 * 944 * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with 945 * new scan results 946 * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between 947 */ 948 enum scan_status { 949 VENDOR_SCAN_STATUS_NEW_RESULTS, 950 VENDOR_SCAN_STATUS_ABORTED, 951 VENDOR_SCAN_STATUS_MAX, 952 }; 953 954 /** 955 * enum qca_vendor_attr_ota_test - Specifies the values for vendor 956 * command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST 957 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test 958 */ 959 enum qca_vendor_attr_ota_test { 960 QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID, 961 /* 8-bit unsigned value to indicate if OTA test is enabled */ 962 QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE, 963 /* keep last */ 964 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST, 965 QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX = 966 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1 967 }; 968 969 /** 970 * enum qca_vendor_attr_txpower_scale - vendor sub commands index 971 * 972 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value 973 */ 974 enum qca_vendor_attr_txpower_scale { 975 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID, 976 /* 8-bit unsigned value to indicate the scaling of tx power */ 977 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE, 978 /* keep last */ 979 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST, 980 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX = 981 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1 982 }; 983 984 /** 985 * enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease 986 * 987 * These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB. 988 */ 989 enum qca_vendor_attr_txpower_decr_db { 990 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID, 991 /* 8-bit unsigned value to indicate the reduction of TX power in dB for 992 * a virtual interface. */ 993 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB, 994 /* keep last */ 995 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST, 996 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX = 997 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1 998 }; 999 1000 /* Attributes for data used by 1001 * QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and 1002 * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands. 1003 */ 1004 enum qca_wlan_vendor_attr_config { 1005 QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0, 1006 /* Unsigned 32-bit value to set the DTIM period. 1007 * Whether the wifi chipset wakes at every dtim beacon or a multiple of 1008 * the DTIM period. If DTIM is set to 3, the STA shall wake up every 3 1009 * DTIM beacons. 1010 */ 1011 QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM = 1, 1012 /* Unsigned 32-bit value to set the wifi_iface stats averaging factor 1013 * used to calculate statistics like average the TSF offset or average 1014 * number of frame leaked. 1015 * For instance, upon Beacon frame reception: 1016 * current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000 1017 * For instance, when evaluating leaky APs: 1018 * current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000 1019 */ 1020 QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2, 1021 /* Unsigned 32-bit value to configure guard time, i.e., when 1022 * implementing IEEE power management based on frame control PM bit, how 1023 * long the driver waits before shutting down the radio and after 1024 * receiving an ACK frame for a Data frame with PM bit set. 1025 */ 1026 QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3, 1027 /* Unsigned 32-bit value to change the FTM capability dynamically */ 1028 QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4, 1029 /* Unsigned 16-bit value to configure maximum TX rate dynamically */ 1030 QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5, 1031 /* Unsigned 32-bit value to configure the number of continuous 1032 * Beacon Miss which shall be used by the firmware to penalize 1033 * the RSSI. 1034 */ 1035 QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6, 1036 /* Unsigned 8-bit value to configure the channel avoidance indication 1037 * behavior. Firmware to send only one indication and ignore duplicate 1038 * indications when set to avoid multiple Apps wakeups. 1039 */ 1040 QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7, 1041 /* 8-bit unsigned value to configure the maximum TX MPDU for 1042 * aggregation. */ 1043 QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8, 1044 /* 8-bit unsigned value to configure the maximum RX MPDU for 1045 * aggregation. */ 1046 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9, 1047 /* 8-bit unsigned value to configure the Non aggregrate/11g sw 1048 * retry threshold (0 disable, 31 max). */ 1049 QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10, 1050 /* 8-bit unsigned value to configure the aggregrate sw 1051 * retry threshold (0 disable, 31 max). */ 1052 QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11, 1053 /* 8-bit unsigned value to configure the MGMT frame 1054 * retry threshold (0 disable, 31 max). */ 1055 QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12, 1056 /* 8-bit unsigned value to configure the CTRL frame 1057 * retry threshold (0 disable, 31 max). */ 1058 QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13, 1059 /* 8-bit unsigned value to configure the propagation delay for 1060 * 2G/5G band (0~63, units in us) */ 1061 QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14, 1062 /* Unsigned 32-bit value to configure the number of unicast TX fail 1063 * packet count. The peer is disconnected once this threshold is 1064 * reached. */ 1065 QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15, 1066 /* Attribute used to set scan default IEs to the driver. 1067 * 1068 * These IEs can be used by scan operations that will be initiated by 1069 * the driver/firmware. 1070 * 1071 * For further scan requests coming to the driver, these IEs should be 1072 * merged with the IEs received along with scan request coming to the 1073 * driver. If a particular IE is present in the scan default IEs but not 1074 * present in the scan request, then that IE should be added to the IEs 1075 * sent in the Probe Request frames for that scan request. */ 1076 QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16, 1077 /* Unsigned 32-bit attribute for generic commands */ 1078 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17, 1079 /* Unsigned 32-bit value attribute for generic commands */ 1080 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18, 1081 /* Unsigned 32-bit data attribute for generic command response */ 1082 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19, 1083 /* Unsigned 32-bit length attribute for 1084 * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */ 1085 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20, 1086 /* Unsigned 32-bit flags attribute for 1087 * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */ 1088 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21, 1089 /* Unsigned 32-bit, defining the access policy. 1090 * See enum qca_access_policy. Used with 1091 * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. */ 1092 QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22, 1093 /* Sets the list of full set of IEs for which a specific access policy 1094 * has to be applied. Used along with 1095 * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access. 1096 * Zero length payload can be used to clear this access constraint. */ 1097 QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23, 1098 /* Unsigned 32-bit, specifies the interface index (netdev) for which the 1099 * corresponding configurations are applied. If the interface index is 1100 * not specified, the configurations are attributed to the respective 1101 * wiphy. */ 1102 QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24, 1103 /* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */ 1104 QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25, 1105 /* 8-bit unsigned value to configure the driver and below layers to 1106 * ignore the assoc disallowed set by APs while connecting 1107 * 1-Ignore, 0-Don't ignore */ 1108 QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26, 1109 /* 32-bit unsigned value to trigger antenna diversity features: 1110 * 1-Enable, 0-Disable */ 1111 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27, 1112 /* 32-bit unsigned value to configure specific chain antenna */ 1113 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28, 1114 /* 32-bit unsigned value to trigger cycle selftest 1115 * 1-Enable, 0-Disable */ 1116 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29, 1117 /* 32-bit unsigned to configure the cycle time of selftest 1118 * the unit is micro-second */ 1119 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30, 1120 /* 32-bit unsigned value to set reorder timeout for AC_VO */ 1121 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31, 1122 /* 32-bit unsigned value to set reorder timeout for AC_VI */ 1123 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VIDEO = 32, 1124 /* 32-bit unsigned value to set reorder timeout for AC_BE */ 1125 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BESTEFFORT = 33, 1126 /* 32-bit unsigned value to set reorder timeout for AC_BK */ 1127 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BACKGROUND = 34, 1128 /* 6-byte MAC address to point out the specific peer */ 1129 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC = 35, 1130 /* 32-bit unsigned value to set window size for specific peer */ 1131 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_WINLIMIT = 36, 1132 /* 8-bit unsigned value to set the beacon miss threshold in 2.4 GHz */ 1133 QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_24 = 37, 1134 /* 8-bit unsigned value to set the beacon miss threshold in 5 GHz */ 1135 QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_5 = 38, 1136 1137 /* keep last */ 1138 QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST, 1139 QCA_WLAN_VENDOR_ATTR_CONFIG_MAX = 1140 QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1, 1141 }; 1142 1143 /** 1144 * enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration 1145 */ 1146 enum qca_wlan_vendor_attr_sap_config { 1147 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0, 1148 /* 1 - reserved for QCA */ 1149 /* List of frequencies on which AP is expected to operate. 1150 * This is irrespective of ACS configuration. This list is a priority 1151 * based one and is looked for before the AP is created to ensure the 1152 * best concurrency sessions (avoid MCC and use DBS/SCC) co-exist in 1153 * the system. 1154 */ 1155 QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2, 1156 1157 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST, 1158 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX = 1159 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1, 1160 }; 1161 1162 /** 1163 * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP 1164 * conditional channel switch 1165 */ 1166 enum qca_wlan_vendor_attr_sap_conditional_chan_switch { 1167 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0, 1168 /* Priority based frequency list (an array of u32 values in host byte 1169 * order) */ 1170 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1, 1171 /* Status of the conditional switch (u32). 1172 * 0: Success, Non-zero: Failure 1173 */ 1174 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2, 1175 1176 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST, 1177 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX = 1178 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1, 1179 }; 1180 1181 /** 1182 * enum qca_wlan_gpio_attr - Parameters for GPIO configuration 1183 */ 1184 enum qca_wlan_gpio_attr { 1185 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0, 1186 /* Unsigned 32-bit attribute for GPIO command */ 1187 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND, 1188 /* Unsigned 32-bit attribute for GPIO PIN number to configure */ 1189 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM, 1190 /* Unsigned 32-bit attribute for GPIO value to configure */ 1191 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE, 1192 /* Unsigned 32-bit attribute for GPIO pull type */ 1193 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE, 1194 /* Unsigned 32-bit attribute for GPIO interrupt mode */ 1195 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE, 1196 1197 /* keep last */ 1198 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST, 1199 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX = 1200 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1 1201 }; 1202 1203 /** 1204 * enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability 1205 */ 1206 enum qca_wlan_vendor_attr_get_hw_capability { 1207 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID, 1208 /* Antenna isolation 1209 * An attribute used in the response. 1210 * The content of this attribute is encoded in a byte array. Each byte 1211 * value is an antenna isolation value. The array length is the number 1212 * of antennas. 1213 */ 1214 QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION, 1215 /* Request HW capability 1216 * An attribute used in the request. 1217 * The content of this attribute is a u32 array for one or more of 1218 * hardware capabilities (attribute IDs) that are being requested. Each 1219 * u32 value has a value from this 1220 * enum qca_wlan_vendor_attr_get_hw_capability 1221 * identifying which capabilities are requested. 1222 */ 1223 QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY, 1224 1225 /* keep last */ 1226 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST, 1227 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX = 1228 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1, 1229 }; 1230 1231 /** 1232 * enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring 1233 * offload which is an extension for LL_STATS. 1234 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms. 1235 * If MAC counters do not exceed the threshold, FW will report monitored 1236 * link layer counters periodically as this setting. The first report is 1237 * always triggered by this timer. 1238 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99). 1239 * For each MAC layer counter, FW holds two copies. One is the current value. 1240 * The other is the last report. Once a current counter's increment is larger 1241 * than the threshold, FW will indicate that counter to host even if the 1242 * monitoring timer does not expire. 1243 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change 1244 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU 1245 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same 1246 * failure code. 1247 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code 1248 * 1: TX packet discarded 1249 * 2: No ACK 1250 * 3: Postpone 1251 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address 1252 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state 1253 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold. 1254 * Threshold for all monitored parameters. If per counter dedicated threshold 1255 * is not enabled, this threshold will take effect. 1256 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this 1257 * event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0. 1258 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID 1259 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID 1260 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters 1261 * Bit0: TX counter unit in MSDU 1262 * Bit1: TX counter unit in MPDU 1263 * Bit2: TX counter unit in PPDU 1264 * Bit3: TX counter unit in byte 1265 * Bit4: Dropped MSDUs 1266 * Bit5: Dropped Bytes 1267 * Bit6: MPDU retry counter 1268 * Bit7: MPDU failure counter 1269 * Bit8: PPDU failure counter 1270 * Bit9: MPDU aggregation counter 1271 * Bit10: MCS counter for ACKed MPDUs 1272 * Bit11: MCS counter for Failed MPDUs 1273 * Bit12: TX Delay counter 1274 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters 1275 * Bit0: MAC RX counter unit in MPDU 1276 * Bit1: MAC RX counter unit in byte 1277 * Bit2: PHY RX counter unit in PPDU 1278 * Bit3: PHY RX counter unit in byte 1279 * Bit4: Disorder counter 1280 * Bit5: Retry counter 1281 * Bit6: Duplication counter 1282 * Bit7: Discard counter 1283 * Bit8: MPDU aggregation size counter 1284 * Bit9: MCS counter 1285 * Bit10: Peer STA power state change (wake to sleep) counter 1286 * Bit11: Peer STA power save counter, total time in PS mode 1287 * Bit12: Probe request counter 1288 * Bit13: Other management frames counter 1289 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA 1290 * Bit0: Idle time 1291 * Bit1: TX time 1292 * Bit2: time RX in current bss 1293 * Bit3: Out of current bss time 1294 * Bit4: Wireless medium busy time 1295 * Bit5: RX in bad condition time 1296 * Bit6: TX in bad condition time 1297 * Bit7: time wlan card not available 1298 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal 1299 * Bit0: Per channel SNR counter 1300 * Bit1: Per channel noise floor counter 1301 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers 1302 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels 1303 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats 1304 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats 1305 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats 1306 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs 1307 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs 1308 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs 1309 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data 1310 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets 1311 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped 1312 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK 1313 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed 1314 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed 1315 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM: 1316 * aggregation stats buffer length 1317 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats 1318 * buffer for ACKed MPDUs. 1319 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats 1320 * buffer for failed MPDUs. 1321 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE: 1322 * length of delay stats array. 1323 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats 1324 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs 1325 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs 1326 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats 1327 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received 1328 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received 1329 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received 1330 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received 1331 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost 1332 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets 1333 * flagged as retransmissions 1334 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets 1335 * flagged as duplicated 1336 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX 1337 * packets discarded 1338 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation 1339 * stats buffer. 1340 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs 1341 * stats buffer. 1342 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer 1343 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer 1344 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep 1345 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time 1346 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe 1347 * requests received 1348 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt 1349 * frames received 1350 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time 1351 * there is no TX, nor RX, nor interference. 1352 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time 1353 * transmitting packets. 1354 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time 1355 * for receiving. 1356 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time 1357 * interference detected. 1358 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time 1359 * receiving packets with errors. 1360 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time 1361 * TX no-ACK. 1362 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time 1363 * the chip is unable to work in normal conditions. 1364 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time 1365 * receiving packets in current BSS. 1366 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time 1367 * receiving packets not in current BSS. 1368 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas 1369 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL: 1370 * This is a container for per antenna signal stats. 1371 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value 1372 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value 1373 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon 1374 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon 1375 */ 1376 enum qca_wlan_vendor_attr_ll_stats_ext { 1377 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0, 1378 1379 /* Attributes for configurations */ 1380 QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD, 1381 QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD, 1382 1383 /* Peer STA power state change */ 1384 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG, 1385 1386 /* TX failure event */ 1387 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID, 1388 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU, 1389 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS, 1390 1391 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE, 1392 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS, 1393 1394 /* MAC counters */ 1395 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL, 1396 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE, 1397 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID, 1398 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID, 1399 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP, 1400 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP, 1401 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP, 1402 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP, 1403 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM, 1404 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM, 1405 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS, 1406 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER, 1407 1408 /* Sub-attributes for PEER_AC_TX */ 1409 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU, 1410 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU, 1411 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU, 1412 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES, 1413 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP, 1414 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES, 1415 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY, 1416 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK, 1417 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK, 1418 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM, 1419 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM, 1420 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM, 1421 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR, 1422 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS, 1423 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS, 1424 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE, 1425 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY, 1426 1427 /* Sub-attributes for PEER_AC_RX */ 1428 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU, 1429 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES, 1430 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU, 1431 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES, 1432 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST, 1433 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY, 1434 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP, 1435 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD, 1436 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM, 1437 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM, 1438 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS, 1439 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR, 1440 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES, 1441 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION, 1442 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ, 1443 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT, 1444 1445 /* Sub-attributes for CCA_BSS */ 1446 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME, 1447 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME, 1448 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME, 1449 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY, 1450 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD, 1451 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD, 1452 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL, 1453 1454 /* sub-attribute for BSS_RX_TIME */ 1455 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME, 1456 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME, 1457 1458 /* Sub-attributes for PEER_SIGNAL */ 1459 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM, 1460 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL, 1461 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR, 1462 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF, 1463 1464 /* Sub-attributes for IFACE_BSS */ 1465 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON, 1466 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON, 1467 1468 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST, 1469 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX = 1470 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1 1471 }; 1472 1473 /* Attributes for FTM commands and events */ 1474 1475 /** 1476 * enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities 1477 * 1478 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See 1479 * enum qca_wlan_vendor_attr_loc_capa_flags. 1480 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number 1481 * of measurement sessions that can run concurrently. 1482 * Default is one session (no session concurrency). 1483 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique 1484 * peers that are supported in running sessions. For example, 1485 * if the value is 8 and maximum number of sessions is 2, you can 1486 * have one session with 8 unique peers, or 2 sessions with 4 unique 1487 * peers each, and so on. 1488 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number 1489 * of bursts per peer, as an exponent (2^value). Default is 0, 1490 * meaning no multi-burst support. 1491 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number 1492 * of measurement exchanges allowed in a single burst. 1493 * @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement 1494 * types. A bit mask (unsigned 32 bit value), each bit corresponds 1495 * to an AOA type as defined by enum qca_vendor_attr_aoa_type. 1496 */ 1497 enum qca_wlan_vendor_attr_loc_capa { 1498 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID, 1499 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS, 1500 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS, 1501 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS, 1502 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP, 1503 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST, 1504 QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES, 1505 /* keep last */ 1506 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST, 1507 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX = 1508 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1, 1509 }; 1510 1511 /** 1512 * enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags 1513 * 1514 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver 1515 * can be configured as an FTM responder (for example, an AP that 1516 * services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 1517 * will be supported if set. 1518 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver 1519 * can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION 1520 * will be supported if set. 1521 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder 1522 * supports immediate (ASAP) response. 1523 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone 1524 * AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS. 1525 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports 1526 * requesting AOA measurements as part of an FTM session. 1527 */ 1528 enum qca_wlan_vendor_attr_loc_capa_flags { 1529 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0, 1530 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1, 1531 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2, 1532 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3, 1533 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4, 1534 }; 1535 1536 /** 1537 * enum qca_wlan_vendor_attr_ftm_peer_info: Information about 1538 * a single peer in a measurement session. 1539 * 1540 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer. 1541 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related 1542 * to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags. 1543 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of 1544 * FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0 1545 * 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for 1546 * list of supported attributes. 1547 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for 1548 * secure measurement. 1549 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA 1550 * measurement every <value> bursts. If 0 or not specified, 1551 * AOA measurements will be disabled for this peer. 1552 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where 1553 * the measurement frames are exchanged. Optional; if not 1554 * specified, try to locate the peer in the kernel scan 1555 * results cache and use frequency from there. 1556 */ 1557 enum qca_wlan_vendor_attr_ftm_peer_info { 1558 QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID, 1559 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR, 1560 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS, 1561 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS, 1562 QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID, 1563 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD, 1564 QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ, 1565 /* keep last */ 1566 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST, 1567 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX = 1568 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1, 1569 }; 1570 1571 /** 1572 * enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags, 1573 * per-peer 1574 * 1575 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request 1576 * immediate (ASAP) response from peer. 1577 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request 1578 * LCI report from peer. The LCI report includes the absolute 1579 * location of the peer in "official" coordinates (similar to GPS). 1580 * See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information. 1581 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request 1582 * Location civic report from peer. The LCR includes the location 1583 * of the peer in free-form format. See IEEE P802.11-REVmc/D7.0, 1584 * 11.24.6.7 for more information. 1585 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set, 1586 * request a secure measurement. 1587 * QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided. 1588 */ 1589 enum qca_wlan_vendor_attr_ftm_peer_meas_flags { 1590 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0, 1591 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1, 1592 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2, 1593 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3, 1594 }; 1595 1596 /** 1597 * enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters 1598 * 1599 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements 1600 * to perform in a single burst. 1601 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to 1602 * perform, specified as an exponent (2^value). 1603 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst 1604 * instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. 1605 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts, 1606 * as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must 1607 * be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION. 1608 */ 1609 enum qca_wlan_vendor_attr_ftm_meas_param { 1610 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID, 1611 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST, 1612 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP, 1613 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION, 1614 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD, 1615 /* keep last */ 1616 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST, 1617 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX = 1618 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1, 1619 }; 1620 1621 /** 1622 * enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results 1623 * 1624 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported 1625 * peer. 1626 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement 1627 * request for this peer. 1628 * See enum qca_wlan_vendor_attr_ftm_peer_result_status. 1629 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related 1630 * to measurement results for this peer. 1631 * See enum qca_wlan_vendor_attr_ftm_peer_result_flags. 1632 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when 1633 * request failed and peer requested not to send an additional request 1634 * for this number of seconds. 1635 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received 1636 * from peer. In the format specified by IEEE P802.11-REVmc/D7.0, 1637 * 9.4.2.22.10. 1638 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when 1639 * received from peer. In the format specified by IEEE P802.11-REVmc/D7.0, 1640 * 9.4.2.22.13. 1641 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer 1642 * overridden some measurement request parameters. See 1643 * enum qca_wlan_vendor_attr_ftm_meas_param. 1644 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement 1645 * for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT. 1646 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement 1647 * results. Each entry is a nested attribute defined 1648 * by enum qca_wlan_vendor_attr_ftm_meas. 1649 */ 1650 enum qca_wlan_vendor_attr_ftm_peer_result { 1651 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID, 1652 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR, 1653 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS, 1654 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS, 1655 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS, 1656 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI, 1657 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR, 1658 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS, 1659 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS, 1660 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS, 1661 /* keep last */ 1662 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST, 1663 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX = 1664 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1, 1665 }; 1666 1667 /** 1668 * enum qca_wlan_vendor_attr_ftm_peer_result_status 1669 * 1670 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results 1671 * will be provided. Peer may have overridden some measurement parameters, 1672 * in which case overridden parameters will be report by 1673 * QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute. 1674 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable 1675 * of performing the measurement request. No more results will be sent 1676 * for this peer in this session. 1677 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request 1678 * failed, and requested not to send an additional request for number 1679 * of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS 1680 * attribute. 1681 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation 1682 * failed. Request was not sent over the air. 1683 */ 1684 enum qca_wlan_vendor_attr_ftm_peer_result_status { 1685 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK, 1686 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE, 1687 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED, 1688 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID, 1689 }; 1690 1691 /** 1692 * enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags 1693 * for measurement result, per-peer 1694 * 1695 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set, 1696 * measurement completed for this peer. No more results will be reported 1697 * for this peer in this session. 1698 */ 1699 enum qca_wlan_vendor_attr_ftm_peer_result_flags { 1700 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0, 1701 }; 1702 1703 /** 1704 * enum qca_vendor_attr_loc_session_status: Session completion status code 1705 * 1706 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed 1707 * successfully. 1708 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted 1709 * by request. 1710 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request 1711 * was invalid and was not started. 1712 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error 1713 * and did not complete normally (for example out of resources). 1714 */ 1715 enum qca_vendor_attr_loc_session_status { 1716 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK, 1717 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED, 1718 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID, 1719 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED, 1720 }; 1721 1722 /** 1723 * enum qca_wlan_vendor_attr_ftm_meas: Single measurement data 1724 * 1725 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as 1726 * recorded by responder, in picoseconds. 1727 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 1728 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at 1729 * initiator, in picoseconds. 1730 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 1731 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by 1732 * initiator, in picoseconds. 1733 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 1734 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at 1735 * responder, in picoseconds. 1736 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 1737 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded 1738 * during this measurement exchange. Optional and will be provided if 1739 * the hardware can measure it. 1740 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by 1741 * responder. Not always provided. 1742 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 1743 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by 1744 * responder. Not always provided. 1745 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 1746 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by 1747 * initiator. Not always provided. 1748 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 1749 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by 1750 * initiator. Not always provided. 1751 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 1752 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding. 1753 */ 1754 enum qca_wlan_vendor_attr_ftm_meas { 1755 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID, 1756 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1, 1757 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2, 1758 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3, 1759 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4, 1760 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI, 1761 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR, 1762 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR, 1763 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR, 1764 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR, 1765 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD, 1766 /* keep last */ 1767 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST, 1768 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX = 1769 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1, 1770 }; 1771 1772 /** 1773 * enum qca_wlan_vendor_attr_aoa_type - AOA measurement type 1774 * 1775 * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest 1776 * CIR (channel impulse response) path for each antenna. 1777 * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude 1778 * of the strongest CIR path for each antenna. 1779 */ 1780 enum qca_wlan_vendor_attr_aoa_type { 1781 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE, 1782 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP, 1783 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX 1784 }; 1785 1786 /** 1787 * enum qca_wlan_vendor_attr_encryption_test - Attributes to 1788 * validate encryption engine 1789 * 1790 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute. 1791 * This will be included if the request is for decryption; if not included, 1792 * the request is treated as a request for encryption by default. 1793 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value 1794 * indicating the key cipher suite. Takes same values as 1795 * NL80211_ATTR_KEY_CIPHER. 1796 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value 1797 * Key Id to be used for encryption 1798 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values. 1799 * Key (TK) to be used for encryption/decryption 1800 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values. 1801 * Packet number to be specified for encryption/decryption 1802 * 6 bytes for TKIP/CCMP/GCMP. 1803 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values 1804 * representing the 802.11 packet (header + payload + FCS) that 1805 * needs to be encrypted/decrypted. 1806 * Encrypted/decrypted response from the driver will also be sent 1807 * to userspace with the same attribute. 1808 */ 1809 enum qca_wlan_vendor_attr_encryption_test { 1810 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0, 1811 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION, 1812 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER, 1813 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID, 1814 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK, 1815 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN, 1816 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA, 1817 1818 /* keep last */ 1819 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST, 1820 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX = 1821 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1 1822 }; 1823 1824 /** 1825 * enum qca_wlan_vendor_attr_dmg_rf_sector_type - Type of 1826 * sector for DMG RF sector operations. 1827 * 1828 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX: RX sector 1829 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX: TX sector 1830 */ 1831 enum qca_wlan_vendor_attr_dmg_rf_sector_type { 1832 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX, 1833 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX, 1834 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_MAX 1835 }; 1836 1837 /** 1838 * enum qca_wlan_vendor_attr_dmg_rf_sector_cfg - Attributes for 1839 * DMG RF sector configuration for a single RF module. 1840 * The values are defined in a compact way which closely matches 1841 * the way it is stored in HW registers. 1842 * The configuration provides values for 32 antennas and 8 distribution 1843 * amplifiers, and together describes the characteristics of the RF 1844 * sector - such as a beam in some direction with some gain. 1845 * 1846 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX: Index 1847 * of RF module for this configuration. 1848 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0: Bit 0 of edge 1849 * amplifier gain index. Unsigned 32 bit number containing 1850 * bits for all 32 antennas. 1851 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1: Bit 1 of edge 1852 * amplifier gain index. Unsigned 32 bit number containing 1853 * bits for all 32 antennas. 1854 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2: Bit 2 of edge 1855 * amplifier gain index. Unsigned 32 bit number containing 1856 * bits for all 32 antennas. 1857 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI: Phase values 1858 * for first 16 antennas, 2 bits per antenna. 1859 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO: Phase values 1860 * for last 16 antennas, 2 bits per antenna. 1861 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16: Contains 1862 * DTYPE values (3 bits) for each distribution amplifier, followed 1863 * by X16 switch bits for each distribution amplifier. There are 1864 * total of 8 distribution amplifiers. 1865 */ 1866 enum qca_wlan_vendor_attr_dmg_rf_sector_cfg { 1867 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0, 1868 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX = 1, 1869 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0 = 2, 1870 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1 = 3, 1871 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2 = 4, 1872 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI = 5, 1873 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO = 6, 1874 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16 = 7, 1875 1876 /* keep last */ 1877 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST, 1878 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MAX = 1879 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1 1880 }; 1881 1882 enum qca_wlan_vendor_attr_ll_stats_set { 1883 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0, 1884 /* Unsigned 32-bit value */ 1885 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1, 1886 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING = 2, 1887 /* keep last */ 1888 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST, 1889 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX = 1890 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1, 1891 }; 1892 1893 enum qca_wlan_vendor_attr_ll_stats_clr { 1894 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0, 1895 /* Unsigned 32bit bitmap for clearing statistics 1896 * All radio statistics 0x00000001 1897 * cca_busy_time (within radio statistics) 0x00000002 1898 * All channel stats (within radio statistics) 0x00000004 1899 * All scan statistics (within radio statistics) 0x00000008 1900 * All interface statistics 0x00000010 1901 * All tx rate statistics (within interface statistics) 0x00000020 1902 * All ac statistics (with in interface statistics) 0x00000040 1903 * All contention (min, max, avg) statistics (within ac statisctics) 1904 * 0x00000080. 1905 */ 1906 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK = 1, 1907 /* Unsigned 8 bit value: Request to stop statistics collection */ 1908 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ = 2, 1909 1910 /* Unsigned 32 bit bitmap: Response from the driver 1911 * for the cleared statistics 1912 */ 1913 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK = 3, 1914 /* Unsigned 8 bit value: Response from driver/firmware 1915 * for the stop request 1916 */ 1917 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP = 4, 1918 /* keep last */ 1919 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST, 1920 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX = 1921 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1, 1922 }; 1923 1924 enum qca_wlan_vendor_attr_ll_stats_get { 1925 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0, 1926 /* Unsigned 32 bit value provided by the caller issuing the GET stats 1927 * command. When reporting the stats results, the driver uses the same 1928 * value to indicate which GET request the results correspond to. 1929 */ 1930 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID = 1, 1931 /* Unsigned 32 bit value - bit mask to identify what statistics are 1932 * requested for retrieval. 1933 * Radio Statistics 0x00000001 1934 * Interface Statistics 0x00000020 1935 * All Peer Statistics 0x00000040 1936 * Peer Statistics 0x00000080 1937 */ 1938 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK = 2, 1939 /* keep last */ 1940 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST, 1941 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX = 1942 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1, 1943 }; 1944 1945 enum qca_wlan_vendor_attr_ll_stats_results { 1946 QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0, 1947 /* Unsigned 32bit value. Used by the driver; must match the request id 1948 * provided with the QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET command. 1949 */ 1950 QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1, 1951 1952 /* Unsigned 32 bit value */ 1953 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2, 1954 /* Unsigned 32 bit value */ 1955 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3, 1956 /* Unsigned 32 bit value */ 1957 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4, 1958 /* Unsigned 32 bit value */ 1959 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5, 1960 /* Signed 32 bit value */ 1961 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6, 1962 /* Signed 32 bit value */ 1963 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7, 1964 /* Signed 32 bit value */ 1965 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8, 1966 1967 /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are 1968 * nested within the interface stats. 1969 */ 1970 1971 /* Interface mode, e.g., STA, SOFTAP, IBSS, etc. 1972 * Type = enum wifi_interface_mode. 1973 */ 1974 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE = 9, 1975 /* Interface MAC address. An array of 6 Unsigned int8 */ 1976 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR = 10, 1977 /* Type = enum wifi_connection_state, e.g., DISCONNECTED, 1978 * AUTHENTICATING, etc. valid for STA, CLI only. 1979 */ 1980 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE = 11, 1981 /* Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE 1982 */ 1983 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING = 12, 1984 /* Unsigned 32 bit value. WIFI_CAPABILITY_XXX */ 1985 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13, 1986 /* NULL terminated SSID. An array of 33 Unsigned 8bit values */ 1987 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14, 1988 /* BSSID. An array of 6 unsigned 8 bit values */ 1989 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15, 1990 /* Country string advertised by AP. An array of 3 unsigned 8 bit 1991 * values. 1992 */ 1993 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR = 16, 1994 /* Country string for this association. An array of 3 unsigned 8 bit 1995 * values. 1996 */ 1997 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR = 17, 1998 1999 /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could 2000 * be nested within the interface stats. 2001 */ 2002 2003 /* Type = enum wifi_traffic_ac, e.g., V0, VI, BE and BK */ 2004 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC = 18, 2005 /* Unsigned int 32 value corresponding to respective AC */ 2006 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU = 19, 2007 /* Unsigned int 32 value corresponding to respective AC */ 2008 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU = 20, 2009 /* Unsigned int 32 value corresponding to respective AC */ 2010 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST = 21, 2011 /* Unsigned int 32 value corresponding to respective AC */ 2012 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST = 22, 2013 /* Unsigned int 32 value corresponding to respective AC */ 2014 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU = 23, 2015 /* Unsigned int 32 value corresponding to respective AC */ 2016 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU = 24, 2017 /* Unsigned int 32 value corresponding to respective AC */ 2018 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST = 25, 2019 /* Unsigned int 32 value corresponding to respective AC */ 2020 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES = 26, 2021 /* Unsigned int 32 value corresponding to respective AC */ 2022 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT = 27, 2023 /* Unsigned int 32 values corresponding to respective AC */ 2024 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG = 28, 2025 /* Unsigned int 32 values corresponding to respective AC */ 2026 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN = 29, 2027 /* Unsigned int 32 values corresponding to respective AC */ 2028 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX = 30, 2029 /* Unsigned int 32 values corresponding to respective AC */ 2030 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG = 31, 2031 /* Unsigned int 32 values corresponding to respective AC */ 2032 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES = 32, 2033 /* Unsigned 32 bit value. Number of peers */ 2034 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS = 33, 2035 2036 /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are 2037 * nested within the interface stats. 2038 */ 2039 2040 /* Type = enum wifi_peer_type. Peer type, e.g., STA, AP, P2P GO etc. */ 2041 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE = 34, 2042 /* MAC addr corresponding to respective peer. An array of 6 unsigned 2043 * 8 bit values. 2044 */ 2045 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS = 35, 2046 /* Unsigned int 32 bit value representing capabilities corresponding 2047 * to respective peer. 2048 */ 2049 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES = 36, 2050 /* Unsigned 32 bit value. Number of rates */ 2051 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES = 37, 2052 2053 /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_* 2054 * are nested within the rate stat. 2055 */ 2056 2057 /* Wi-Fi Rate - separate attributes defined for individual fields */ 2058 2059 /* Unsigned int 8 bit value; 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved */ 2060 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE = 38, 2061 /* Unsigned int 8 bit value; 0:1x1, 1:2x2, 3:3x3, 4:4x4 */ 2062 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS = 39, 2063 /* Unsigned int 8 bit value; 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz */ 2064 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40, 2065 /* Unsigned int 8 bit value; OFDM/CCK rate code would be as per IEEE Std 2066 * in the units of 0.5 Mbps HT/VHT it would be MCS index */ 2067 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41, 2068 2069 /* Unsigned 32 bit value. Bit rate in units of 100 kbps */ 2070 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42, 2071 2072 2073 /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_STAT_* could be 2074 * nested within the peer info stats. 2075 */ 2076 2077 /* Unsigned int 32 bit value. Number of successfully transmitted data 2078 * packets, i.e., with ACK received corresponding to the respective 2079 * rate. 2080 */ 2081 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU = 43, 2082 /* Unsigned int 32 bit value. Number of received data packets 2083 * corresponding to the respective rate. 2084 */ 2085 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU = 44, 2086 /* Unsigned int 32 bit value. Number of data packet losses, i.e., no ACK 2087 * received corresponding to the respective rate. 2088 */ 2089 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST = 45, 2090 /* Unsigned int 32 bit value. Total number of data packet retries for 2091 * the respective rate. 2092 */ 2093 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES = 46, 2094 /* Unsigned int 32 bit value. Total number of short data packet retries 2095 * for the respective rate. 2096 */ 2097 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT = 47, 2098 /* Unsigned int 32 bit value. Total number of long data packet retries 2099 * for the respective rate. 2100 */ 2101 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48, 2102 2103 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49, 2104 /* Unsigned 32 bit value. Total number of msecs the radio is awake 2105 * accruing over time. 2106 */ 2107 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME = 50, 2108 /* Unsigned 32 bit value. Total number of msecs the radio is 2109 * transmitting accruing over time. 2110 */ 2111 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME = 51, 2112 /* Unsigned 32 bit value. Total number of msecs the radio is in active 2113 * receive accruing over time. 2114 */ 2115 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME = 52, 2116 /* Unsigned 32 bit value. Total number of msecs the radio is awake due 2117 * to all scan accruing over time. 2118 */ 2119 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN = 53, 2120 /* Unsigned 32 bit value. Total number of msecs the radio is awake due 2121 * to NAN accruing over time. 2122 */ 2123 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD = 54, 2124 /* Unsigned 32 bit value. Total number of msecs the radio is awake due 2125 * to GSCAN accruing over time. 2126 */ 2127 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN = 55, 2128 /* Unsigned 32 bit value. Total number of msecs the radio is awake due 2129 * to roam scan accruing over time. 2130 */ 2131 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN = 56, 2132 /* Unsigned 32 bit value. Total number of msecs the radio is awake due 2133 * to PNO scan accruing over time. 2134 */ 2135 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN = 57, 2136 /* Unsigned 32 bit value. Total number of msecs the radio is awake due 2137 * to Hotspot 2.0 scans and GAS exchange accruing over time. 2138 */ 2139 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20 = 58, 2140 /* Unsigned 32 bit value. Number of channels. */ 2141 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS = 59, 2142 2143 /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could 2144 * be nested within the channel stats. 2145 */ 2146 2147 /* Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80 */ 2148 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60, 2149 /* Unsigned 32 bit value. Primary 20 MHz channel. */ 2150 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61, 2151 /* Unsigned 32 bit value. Center frequency (MHz) first segment. */ 2152 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62, 2153 /* Unsigned 32 bit value. Center frequency (MHz) second segment. */ 2154 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1 = 63, 2155 2156 /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_* could be 2157 * nested within the radio stats. 2158 */ 2159 2160 /* Unsigned int 32 bit value representing total number of msecs the 2161 * radio is awake on that channel accruing over time, corresponding to 2162 * the respective channel. 2163 */ 2164 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME = 64, 2165 /* Unsigned int 32 bit value representing total number of msecs the CCA 2166 * register is busy accruing over time corresponding to the respective 2167 * channel. 2168 */ 2169 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME = 65, 2170 2171 QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66, 2172 2173 /* Signifies the nested list of channel attributes 2174 * QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* 2175 */ 2176 QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67, 2177 2178 /* Signifies the nested list of peer info attributes 2179 * QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* 2180 */ 2181 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68, 2182 2183 /* Signifies the nested list of rate info attributes 2184 * QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_* 2185 */ 2186 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO = 69, 2187 2188 /* Signifies the nested list of wmm info attributes 2189 * QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* 2190 */ 2191 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO = 70, 2192 2193 /* Unsigned 8 bit value. Used by the driver; if set to 1, it indicates 2194 * that more stats, e.g., peers or radio, are to follow in the next 2195 * QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event. 2196 * Otherwise, it is set to 0. 2197 */ 2198 QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71, 2199 2200 /* Unsigned 64 bit value */ 2201 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72, 2202 2203 /* Unsigned 32 bit value */ 2204 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73, 2205 2206 /* Unsigned 32 bit value */ 2207 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74, 2208 2209 /* Unsigned 32 bit value */ 2210 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75, 2211 2212 /* Unsigned 32 bit value */ 2213 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE = 76, 2214 2215 /* Unsigned 32 bit value */ 2216 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS = 77, 2217 2218 /* Number of msecs the radio spent in transmitting for each power level 2219 */ 2220 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78, 2221 2222 /* Unsigned 32 bit value */ 2223 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79, 2224 /* Unsigned 32 bit value */ 2225 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80, 2226 /* Unsigned 32 bit value */ 2227 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81, 2228 /* Unsigned 32 bit value */ 2229 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82, 2230 2231 /* keep last */ 2232 QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST, 2233 QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX = 2234 QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1, 2235 }; 2236 2237 enum qca_wlan_vendor_attr_ll_stats_type 2238 { 2239 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0, 2240 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1, 2241 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2, 2242 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_PEERS = 3, 2243 2244 /* keep last */ 2245 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST, 2246 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_MAX = 2247 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST - 1, 2248 }; 2249 2250 /** 2251 * enum qca_wlan_vendor_attr_tdls_configuration - Attributes for 2252 * TDLS configuration to the host driver. 2253 * 2254 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger 2255 * mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode 2256 * represents the different TDLS trigger modes. 2257 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within 2258 * which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number 2259 * of packets shall meet the criteria for implicit TDLS setup. 2260 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx packets 2261 * within a duration QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD 2262 * to initiate a TDLS setup. 2263 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to initiate 2264 * a TDLS Discovery to the peer. 2265 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of 2266 * discovery attempts to know the TDLS capability of the peer. A peer is 2267 * marked as TDLS not capable if there is no response for all the attempts. 2268 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32) 2269 * within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD 2270 * number of TX / RX frames meet the criteria for TDLS teardown. 2271 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number (u32) 2272 * of Tx/Rx packets within a duration 2273 * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link. 2274 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold 2275 * corresponding to the RSSI of the peer below which a TDLS setup is 2276 * triggered. 2277 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold 2278 * corresponding to the RSSI of the peer above which a TDLS teardown is 2279 * triggered. 2280 */ 2281 enum qca_wlan_vendor_attr_tdls_configuration { 2282 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0, 2283 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1, 2284 2285 /* Attributes configuring the TDLS Implicit Trigger */ 2286 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2, 2287 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3, 2288 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4, 2289 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5, 2290 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6, 2291 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7, 2292 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8, 2293 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9, 2294 2295 /* keep last */ 2296 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST, 2297 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX = 2298 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1 2299 }; 2300 2301 /** 2302 * enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in 2303 * the driver 2304 * 2305 * The following are the different values for 2306 * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE. 2307 * 2308 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to initiate/teardown 2309 * the TDLS connection to a respective peer comes from the user space. 2310 * wpa_supplicant provides the commands TDLS_SETUP, TDLS_TEARDOWN, 2311 * TDLS_DISCOVER to do this. 2312 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS 2313 * setup/teardown to the eligible peer once the configured criteria 2314 * (such as TX/RX threshold, RSSI) is met. The attributes 2315 * in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to 2316 * the different configuration criteria for the TDLS trigger from the 2317 * host driver. 2318 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger 2319 * the TDLS setup / teardown through the implicit mode only to the 2320 * configured MAC addresses (wpa_supplicant, with tdls_external_control=1, 2321 * configures the MAC address through TDLS_SETUP / TDLS_TEARDOWN commands). 2322 * External mode works on top of the implicit mode. Thus the host driver 2323 * is expected to configure in TDLS Implicit mode too to operate in 2324 * External mode. 2325 * Configuring External mode alone without Implicit mode is invalid. 2326 * 2327 * All the above implementations work as expected only when the host driver 2328 * advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - representing 2329 * that the TDLS message exchange is not internal to the host driver, but 2330 * depends on wpa_supplicant to do the message exchange. 2331 */ 2332 enum qca_wlan_vendor_tdls_trigger_mode { 2333 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0, 2334 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1, 2335 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2, 2336 }; 2337 2338 /** 2339 * enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits 2340 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0 2341 * that is hard-coded in the Board Data File (BDF). 2342 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1 2343 * that is hard-coded in the Board Data File (BDF). 2344 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2 2345 * that is hard-coded in the Board Data File (BDF). 2346 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3 2347 * that is hard-coded in the Board Data File (BDF). 2348 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4 2349 * that is hard-coded in the Board Data File (BDF). 2350 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any 2351 * source of SAR power limits, thereby disabling the SAR power 2352 * limit feature. 2353 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power 2354 * limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR. 2355 * 2356 * This enumerates the valid set of values that may be supplied for 2357 * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of 2358 * the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command. 2359 */ 2360 enum qca_vendor_attr_sar_limits_selections { 2361 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0, 2362 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1, 2363 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2, 2364 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3, 2365 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4, 2366 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5, 2367 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6, 2368 }; 2369 2370 /** 2371 * enum qca_vendor_attr_sar_limits_spec_modulations - 2372 * SAR limits specification modulation 2373 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK - 2374 * CCK modulation 2375 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM - 2376 * OFDM modulation 2377 * 2378 * This enumerates the valid set of values that may be supplied for 2379 * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an 2380 * instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an 2381 * instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor 2382 * command. 2383 */ 2384 enum qca_vendor_attr_sar_limits_spec_modulations { 2385 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0, 2386 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1, 2387 }; 2388 2389 /** 2390 * enum qca_vendor_attr_sar_limits - Attributes for SAR power limits 2391 * 2392 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT: Optional (u32) value to 2393 * select which SAR power limit table should be used. Valid 2394 * values are enumerated in enum 2395 * %qca_vendor_attr_sar_limits_selections. The existing SAR 2396 * power limit selection is unchanged if this attribute is not 2397 * present. 2398 * 2399 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value 2400 * which specifies the number of SAR power limit specifications 2401 * which will follow. 2402 * 2403 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power 2404 * limit specifications. The number of specifications is 2405 * specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each 2406 * specification contains a set of 2407 * QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A 2408 * specification is uniquely identified by the attributes 2409 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND, 2410 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and 2411 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always 2412 * contains as a payload the attribute 2413 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT. 2414 * 2415 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to 2416 * indicate for which band this specification applies. Valid 2417 * values are enumerated in enum %nl80211_band (although not all 2418 * bands may be supported by a given device). If the attribute is 2419 * not supplied then the specification will be applied to all 2420 * supported bands. 2421 * 2422 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value 2423 * to indicate for which antenna chain this specification 2424 * applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the 2425 * attribute is not supplied then the specification will be 2426 * applied to all chains. 2427 * 2428 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32) 2429 * value to indicate for which modulation scheme this 2430 * specification applies. Valid values are enumerated in enum 2431 * %qca_vendor_attr_sar_limits_spec_modulations. If the attribute 2432 * is not supplied then the specification will be applied to all 2433 * modulation schemes. 2434 * 2435 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32) 2436 * value to specify the actual power limit value in units of 0.5 2437 * dBm (i.e., a value of 11 represents 5.5 dBm). 2438 * 2439 * These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS. 2440 */ 2441 enum qca_vendor_attr_sar_limits { 2442 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0, 2443 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1, 2444 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2, 2445 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3, 2446 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4, 2447 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5, 2448 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6, 2449 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7, 2450 2451 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST, 2452 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX = 2453 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1 2454 }; 2455 2456 /** 2457 * enum qca_wlan_vendor_attr_get_wifi_info: Attributes for data used by 2458 * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO sub command. 2459 */ 2460 enum qca_wlan_vendor_attr_get_wifi_info { 2461 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0, 2462 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1, 2463 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2, 2464 2465 /* keep last */ 2466 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST, 2467 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX = 2468 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1, 2469 }; 2470 2471 /* 2472 * enum qca_wlan_vendor_attr_wifi_logger_start: Attributes for data used by 2473 * QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START sub command. 2474 */ 2475 enum qca_wlan_vendor_attr_wifi_logger_start { 2476 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0, 2477 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1, 2478 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2, 2479 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3, 2480 2481 /* keep last */ 2482 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST, 2483 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_GET_MAX = 2484 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1, 2485 }; 2486 2487 enum qca_wlan_vendor_attr_logger_results { 2488 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_INVALID = 0, 2489 2490 /* Unsigned 32-bit value; must match the request Id supplied by 2491 * Wi-Fi HAL in the corresponding subcmd NL msg. 2492 */ 2493 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_REQUEST_ID = 1, 2494 2495 /* Unsigned 32-bit value; used to indicate the size of memory 2496 * dump to be allocated. 2497 */ 2498 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2, 2499 2500 /* keep last */ 2501 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST, 2502 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MAX = 2503 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1, 2504 }; 2505 2506 enum qca_wlan_vendor_attr_roaming_config_params { 2507 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0, 2508 2509 QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1, 2510 QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2, 2511 2512 /* Attributes for wifi_set_ssid_white_list */ 2513 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3, 2514 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4, 2515 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5, 2516 2517 /* Attributes for set_roam_params */ 2518 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6, 2519 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7, 2520 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8, 2521 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9, 2522 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10, 2523 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11, 2524 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12, 2525 2526 /* Attribute for set_lazy_roam */ 2527 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13, 2528 2529 /* Attribute for set_lazy_roam with preferences */ 2530 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14, 2531 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15, 2532 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16, 2533 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17, 2534 2535 /* Attribute for set_blacklist bssid params */ 2536 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18, 2537 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19, 2538 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20, 2539 2540 /* keep last */ 2541 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST, 2542 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX = 2543 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1, 2544 }; 2545 2546 /* 2547 * enum qca_wlan_vendor_attr_roam_subcmd: Attributes for data used by 2548 * QCA_NL80211_VENDOR_SUBCMD_ROAM sub command. 2549 */ 2550 enum qca_wlan_vendor_attr_roam_subcmd { 2551 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID = 0, 2552 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST = 1, 2553 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_GSCAN_ROAM_PARAMS = 2, 2554 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM = 3, 2555 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS = 4, 2556 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS = 5, 2557 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID = 6, 2558 2559 /* keep last */ 2560 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST, 2561 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX = 2562 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST - 1, 2563 }; 2564 2565 enum qca_wlan_vendor_attr_gscan_config_params { 2566 QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0, 2567 2568 /* Unsigned 32-bit value */ 2569 QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID = 1, 2570 2571 /* Attributes for data used by 2572 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS sub command. 2573 */ 2574 /* Unsigned 32-bit value */ 2575 QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND 2576 = 2, 2577 /* Unsigned 32-bit value */ 2578 QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS 2579 = 3, 2580 2581 /* Attributes for input params used by 2582 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_START sub command. 2583 */ 2584 2585 /* Unsigned 32-bit value; channel frequency */ 2586 QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CHANNEL = 4, 2587 /* Unsigned 32-bit value; dwell time in ms. */ 2588 QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_DWELL_TIME = 5, 2589 /* Unsigned 8-bit value; 0: active; 1: passive; N/A for DFS */ 2590 QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_PASSIVE = 6, 2591 /* Unsigned 8-bit value; channel class */ 2592 QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CLASS = 7, 2593 2594 /* Unsigned 8-bit value; bucket index, 0 based */ 2595 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_INDEX = 8, 2596 /* Unsigned 8-bit value; band. */ 2597 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BAND = 9, 2598 /* Unsigned 32-bit value; desired period, in ms. */ 2599 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_PERIOD = 10, 2600 /* Unsigned 8-bit value; report events semantics. */ 2601 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_REPORT_EVENTS = 11, 2602 /* Unsigned 32-bit value. Followed by a nested array of 2603 * GSCAN_CHANNEL_SPEC_* attributes. 2604 */ 2605 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS = 12, 2606 2607 /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_* attributes. 2608 * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS 2609 */ 2610 QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC = 13, 2611 2612 /* Unsigned 32-bit value; base timer period in ms. */ 2613 QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_BASE_PERIOD = 14, 2614 /* Unsigned 32-bit value; number of APs to store in each scan in the 2615 * BSSID/RSSI history buffer (keep the highest RSSI APs). 2616 */ 2617 QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN = 15, 2618 /* Unsigned 8-bit value; in %, when scan buffer is this much full, wake 2619 * up AP. 2620 */ 2621 QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT 2622 = 16, 2623 2624 /* Unsigned 8-bit value; number of scan bucket specs; followed by a 2625 * nested array of_GSCAN_BUCKET_SPEC_* attributes and values. The size 2626 * of the array is determined by NUM_BUCKETS. 2627 */ 2628 QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS = 17, 2629 2630 /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_* attributes. 2631 * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS 2632 */ 2633 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC = 18, 2634 2635 /* Unsigned 8-bit value */ 2636 QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH 2637 = 19, 2638 /* Unsigned 32-bit value; maximum number of results to be returned. */ 2639 QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX 2640 = 20, 2641 2642 /* An array of 6 x unsigned 8-bit value */ 2643 QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_BSSID = 21, 2644 /* Signed 32-bit value */ 2645 QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_LOW = 22, 2646 /* Signed 32-bit value */ 2647 QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH = 23, 2648 /* Unsigned 32-bit value */ 2649 QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_CHANNEL = 24, 2650 2651 /* Number of hotlist APs as unsigned 32-bit value, followed by a nested 2652 * array of AP_THRESHOLD_PARAM attributes and values. The size of the 2653 * array is determined by NUM_AP. 2654 */ 2655 QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_NUM_AP = 25, 2656 2657 /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_* attributes. 2658 * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS 2659 */ 2660 QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM = 26, 2661 2662 /* Unsigned 32-bit value; number of samples for averaging RSSI. */ 2663 QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE 2664 = 27, 2665 /* Unsigned 32-bit value; number of samples to confirm AP loss. */ 2666 QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE 2667 = 28, 2668 /* Unsigned 32-bit value; number of APs breaching threshold. */ 2669 QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING = 29, 2670 /* Unsigned 32-bit value; number of APs. Followed by an array of 2671 * AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP. 2672 */ 2673 QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP = 30, 2674 /* Unsigned 32-bit value; number of samples to confirm AP loss. */ 2675 QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE 2676 = 31, 2677 /* Unsigned 32-bit value. If max_period is non zero or different than 2678 * period, then this bucket is an exponential backoff bucket. 2679 */ 2680 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_MAX_PERIOD = 32, 2681 /* Unsigned 32-bit value. */ 2682 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BASE = 33, 2683 /* Unsigned 32-bit value. For exponential back off bucket, number of 2684 * scans to perform for a given period. 2685 */ 2686 QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_STEP_COUNT = 34, 2687 /* Unsigned 8-bit value; in number of scans, wake up AP after these 2688 * many scans. 2689 */ 2690 QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS 2691 = 35, 2692 2693 /* Attributes for data used by 2694 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST sub command. 2695 */ 2696 /* Unsigned 3-2bit value; number of samples to confirm SSID loss. */ 2697 QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE 2698 = 36, 2699 /* Number of hotlist SSIDs as unsigned 32-bit value, followed by a 2700 * nested array of SSID_THRESHOLD_PARAM_* attributes and values. The 2701 * size of the array is determined by NUM_SSID. 2702 */ 2703 QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID = 37, 2704 /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_* 2705 * attributes. 2706 * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID 2707 */ 2708 QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM = 38, 2709 2710 /* An array of 33 x unsigned 8-bit value; NULL terminated SSID */ 2711 QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_SSID = 39, 2712 /* Unsigned 8-bit value */ 2713 QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_BAND = 40, 2714 /* Signed 32-bit value */ 2715 QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW = 41, 2716 /* Signed 32-bit value */ 2717 QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH = 42, 2718 /* Unsigned 32-bit value; a bitmask with additional gscan config flag. 2719 */ 2720 QCA_WLAN_VENDOR_ATTR_GSCAN_CONFIGURATION_FLAGS = 43, 2721 2722 /* keep last */ 2723 QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST, 2724 QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_MAX = 2725 QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1, 2726 }; 2727 2728 enum qca_wlan_vendor_attr_gscan_results { 2729 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_INVALID = 0, 2730 2731 /* Unsigned 32-bit value; must match the request Id supplied by 2732 * Wi-Fi HAL in the corresponding subcmd NL msg. 2733 */ 2734 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_REQUEST_ID = 1, 2735 2736 /* Unsigned 32-bit value; used to indicate the status response from 2737 * firmware/driver for the vendor sub-command. 2738 */ 2739 QCA_WLAN_VENDOR_ATTR_GSCAN_STATUS = 2, 2740 2741 /* GSCAN Valid Channels attributes */ 2742 /* Unsigned 32bit value; followed by a nested array of CHANNELS. */ 2743 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_CHANNELS = 3, 2744 /* An array of NUM_CHANNELS x unsigned 32-bit value integers 2745 * representing channel numbers. 2746 */ 2747 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CHANNELS = 4, 2748 2749 /* GSCAN Capabilities attributes */ 2750 /* Unsigned 32-bit value */ 2751 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE = 5, 2752 /* Unsigned 32-bit value */ 2753 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS = 6, 2754 /* Unsigned 32-bit value */ 2755 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN 2756 = 7, 2757 /* Unsigned 32-bit value */ 2758 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE 2759 = 8, 2760 /* Signed 32-bit value */ 2761 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD 2762 = 9, 2763 /* Unsigned 32-bit value */ 2764 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS = 10, 2765 /* Unsigned 32-bit value */ 2766 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS 2767 = 11, 2768 /* Unsigned 32-bit value */ 2769 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES 2770 = 12, 2771 2772 /* GSCAN Attributes used with 2773 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE sub-command. 2774 */ 2775 2776 /* Unsigned 32-bit value */ 2777 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE = 13, 2778 2779 /* GSCAN attributes used with 2780 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT sub-command. 2781 */ 2782 2783 /* An array of NUM_RESULTS_AVAILABLE x 2784 * QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_* 2785 */ 2786 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST = 14, 2787 2788 /* Unsigned 64-bit value; age of sample at the time of retrieval */ 2789 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_TIME_STAMP = 15, 2790 /* 33 x unsigned 8-bit value; NULL terminated SSID */ 2791 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_SSID = 16, 2792 /* An array of 6 x unsigned 8-bit value */ 2793 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BSSID = 17, 2794 /* Unsigned 32-bit value; channel frequency in MHz */ 2795 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CHANNEL = 18, 2796 /* Signed 32-bit value */ 2797 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RSSI = 19, 2798 /* Unsigned 32-bit value */ 2799 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT = 20, 2800 /* Unsigned 32-bit value */ 2801 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT_SD = 21, 2802 /* Unsigned 16-bit value */ 2803 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD = 22, 2804 /* Unsigned 16-bit value */ 2805 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CAPABILITY = 23, 2806 /* Unsigned 32-bit value; size of the IE DATA blob */ 2807 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_LENGTH = 24, 2808 /* An array of IE_LENGTH x unsigned 8-bit value; blob of all the 2809 * information elements found in the beacon; this data should be a 2810 * packed list of wifi_information_element objects, one after the 2811 * other. 2812 */ 2813 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_DATA = 25, 2814 2815 /* Unsigned 8-bit value; set by driver to indicate more scan results are 2816 * available. 2817 */ 2818 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_MORE_DATA = 26, 2819 2820 /* GSCAN attributes for 2821 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT sub-command. 2822 */ 2823 /* Unsigned 8-bit value */ 2824 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_TYPE = 27, 2825 /* Unsigned 32-bit value */ 2826 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_STATUS = 28, 2827 2828 /* GSCAN attributes for 2829 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND sub-command. 2830 */ 2831 /* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE 2832 * to indicate number of results. 2833 * Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the 2834 * list of results. 2835 */ 2836 2837 /* GSCAN attributes for 2838 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE sub-command. 2839 */ 2840 /* An array of 6 x unsigned 8-bit value */ 2841 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID = 29, 2842 /* Unsigned 32-bit value */ 2843 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL 2844 = 30, 2845 /* Unsigned 32-bit value. */ 2846 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI 2847 = 31, 2848 /* A nested array of signed 32-bit RSSI values. Size of the array is 2849 * determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI. 2850 */ 2851 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST 2852 = 32, 2853 2854 /* GSCAN attributes used with 2855 * QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS sub-command. 2856 */ 2857 /* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE 2858 * to indicate number of gscan cached results returned. 2859 * Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST to indicate 2860 * the list of gscan cached results. 2861 */ 2862 2863 /* An array of NUM_RESULTS_AVAILABLE x 2864 * QCA_NL80211_VENDOR_ATTR_GSCAN_CACHED_RESULTS_* 2865 */ 2866 QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST = 33, 2867 /* Unsigned 32-bit value; a unique identifier for the scan unit. */ 2868 QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_SCAN_ID = 34, 2869 /* Unsigned 32-bit value; a bitmask w/additional information about scan. 2870 */ 2871 QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_FLAGS = 35, 2872 /* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE 2873 * to indicate number of wifi scan results/bssids retrieved by the scan. 2874 * Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the 2875 * list of wifi scan results returned for each cached result block. 2876 */ 2877 2878 /* GSCAN attributes for 2879 * QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command. 2880 */ 2881 /* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE for 2882 * number of results. 2883 * Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested 2884 * list of wifi scan results returned for each 2885 * wifi_passpoint_match_result block. 2886 * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE. 2887 */ 2888 2889 /* GSCAN attributes for 2890 * QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command. 2891 */ 2892 /* Unsigned 32-bit value */ 2893 QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES 2894 = 36, 2895 /* A nested array of 2896 * QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_* 2897 * attributes. Array size = 2898 * *_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES. 2899 */ 2900 QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST = 37, 2901 2902 /* Unsigned 32-bit value; network block id for the matched network */ 2903 QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID = 38, 2904 /* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested 2905 * list of wifi scan results returned for each 2906 * wifi_passpoint_match_result block. 2907 */ 2908 /* Unsigned 32-bit value */ 2909 QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN = 39, 2910 /* An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values; 2911 * ANQP data in the information_element format. 2912 */ 2913 QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP = 40, 2914 2915 /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ 2916 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS = 41, 2917 /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ 2918 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS = 42, 2919 /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ 2920 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID 2921 = 43, 2922 /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ 2923 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID 2924 = 44, 2925 2926 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_BUCKETS_SCANNED = 45, 2927 2928 /* keep last */ 2929 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST, 2930 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_MAX = 2931 QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST - 1, 2932 }; 2933 2934 enum qca_wlan_vendor_attr_pno_config_params { 2935 QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0, 2936 /* Attributes for data used by 2937 * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command. 2938 */ 2939 /* Unsigned 32-bit value */ 2940 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1, 2941 /* Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_* 2942 * attributes. Array size = 2943 * QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM. 2944 */ 2945 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2, 2946 2947 /* Unsigned 32-bit value */ 2948 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3, 2949 /* An array of 256 x unsigned 8-bit value; NULL terminated UTF-8 encoded 2950 * realm, 0 if unspecified. 2951 */ 2952 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4, 2953 /* An array of 16 x unsigned 32-bit value; roaming consortium ids to 2954 * match, 0 if unspecified. 2955 */ 2956 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5, 2957 /* An array of 6 x unsigned 8-bit value; MCC/MNC combination, 0s if 2958 * unspecified. 2959 */ 2960 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6, 2961 2962 /* Attributes for data used by 2963 * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command. 2964 */ 2965 /* Unsigned 32-bit value */ 2966 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7, 2967 /* Array of nested 2968 * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_* 2969 * attributes. Array size = 2970 * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS. 2971 */ 2972 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8, 2973 /* An array of 33 x unsigned 8-bit value; NULL terminated SSID */ 2974 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9, 2975 /* Signed 8-bit value; threshold for considering this SSID as found, 2976 * required granularity for this threshold is 4 dBm to 8 dBm. 2977 */ 2978 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD 2979 = 10, 2980 /* Unsigned 8-bit value; WIFI_PNO_FLAG_XXX */ 2981 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11, 2982 /* Unsigned 8-bit value; auth bit field for matching WPA IE */ 2983 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12, 2984 /* Unsigned 8-bit to indicate ePNO type; 2985 * It takes values from qca_wlan_epno_type 2986 */ 2987 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13, 2988 2989 /* Nested attribute to send the channel list */ 2990 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14, 2991 2992 /* Unsigned 32-bit value; indicates the interval between PNO scan 2993 * cycles in msec. 2994 */ 2995 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15, 2996 QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16, 2997 QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17, 2998 QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18, 2999 QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19, 3000 QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20, 3001 QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21, 3002 QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22, 3003 3004 /* keep last */ 3005 QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST, 3006 QCA_WLAN_VENDOR_ATTR_PNO_MAX = 3007 QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1, 3008 }; 3009 3010 /** 3011 * qca_wlan_vendor_acs_select_reason: This represents the different reasons why 3012 * the ACS has to be triggered. These values are used by 3013 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and 3014 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON 3015 */ 3016 enum qca_wlan_vendor_acs_select_reason { 3017 /* Represents the reason that the ACS triggered during the AP start */ 3018 QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT, 3019 /* Represents the reason that DFS found with the current channel */ 3020 QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS, 3021 /* Represents the reason that LTE co-exist in the current band. */ 3022 QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX, 3023 }; 3024 3025 /** 3026 * qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel. 3027 * This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS. 3028 */ 3029 enum qca_wlan_vendor_channel_prop_flags { 3030 /* Bits 0, 1, 2, and 3 are reserved */ 3031 3032 /* Turbo channel */ 3033 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4, 3034 /* CCK channel */ 3035 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5, 3036 /* OFDM channel */ 3037 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6, 3038 /* 2.4 GHz spectrum channel. */ 3039 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7, 3040 /* 5 GHz spectrum channel */ 3041 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8, 3042 /* Only passive scan allowed */ 3043 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9, 3044 /* Dynamic CCK-OFDM channel */ 3045 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10, 3046 /* GFSK channel (FHSS PHY) */ 3047 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11, 3048 /* Radar found on channel */ 3049 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12, 3050 /* 11a static turbo channel only */ 3051 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13, 3052 /* Half rate channel */ 3053 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14, 3054 /* Quarter rate channel */ 3055 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15, 3056 /* HT 20 channel */ 3057 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16, 3058 /* HT 40 with extension channel above */ 3059 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17, 3060 /* HT 40 with extension channel below */ 3061 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18, 3062 /* HT 40 intolerant */ 3063 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19, 3064 /* VHT 20 channel */ 3065 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20, 3066 /* VHT 40 with extension channel above */ 3067 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21, 3068 /* VHT 40 with extension channel below */ 3069 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22, 3070 /* VHT 80 channel */ 3071 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23, 3072 /* HT 40 intolerant mark bit for ACS use */ 3073 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24, 3074 /* Channel temporarily blocked due to noise */ 3075 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25, 3076 /* VHT 160 channel */ 3077 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26, 3078 /* VHT 80+80 channel */ 3079 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27, 3080 }; 3081 3082 /** 3083 * qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for 3084 * each channel. This is used by 3085 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT. 3086 */ 3087 enum qca_wlan_vendor_channel_prop_flags_ext { 3088 /* Radar found on channel */ 3089 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0, 3090 /* DFS required on channel */ 3091 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1, 3092 /* DFS required on channel for 2nd band of 80+80 */ 3093 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2, 3094 /* If channel has been checked for DFS */ 3095 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3, 3096 /* Excluded in 802.11d */ 3097 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4, 3098 /* Channel Switch Announcement received on this channel */ 3099 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5, 3100 /* Ad-hoc is not allowed */ 3101 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6, 3102 /* Station only channel */ 3103 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7, 3104 /* DFS radar history for slave device (STA mode) */ 3105 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8, 3106 /* DFS CAC valid for slave device (STA mode) */ 3107 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9, 3108 }; 3109 3110 /** 3111 * qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel 3112 * information. These attributes are sent as part of 3113 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following 3114 * attributes correspond to a single channel. 3115 */ 3116 enum qca_wlan_vendor_external_acs_event_chan_info_attr { 3117 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0, 3118 3119 /* A bitmask (u32) with flags specified in 3120 * enum qca_wlan_vendor_channel_prop_flags. 3121 */ 3122 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1, 3123 /* A bitmask (u32) with flags specified in 3124 * enum qca_wlan_vendor_channel_prop_flags_ext. 3125 */ 3126 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2, 3127 /* frequency in MHz (u32) */ 3128 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3, 3129 /* maximum regulatory transmission power (u32) */ 3130 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4, 3131 /* maximum transmission power (u32) */ 3132 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5, 3133 /* minimum transmission power (u32) */ 3134 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6, 3135 /* regulatory class id (u8) */ 3136 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7, 3137 /* maximum antenna gain in (u8) */ 3138 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8, 3139 /* VHT segment 0 (u8) */ 3140 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9, 3141 /* VHT segment 1 (u8) */ 3142 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10, 3143 3144 /* keep last */ 3145 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST, 3146 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX = 3147 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1, 3148 }; 3149 3150 /** 3151 * qca_wlan_vendor_attr_pcl: Represents attributes for 3152 * preferred channel list (PCL). These attributes are sent as part of 3153 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL. 3154 */ 3155 enum qca_wlan_vendor_attr_pcl { 3156 QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0, 3157 3158 /* Channel number (u8) */ 3159 QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1, 3160 /* Channel weightage (u8) */ 3161 QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2, 3162 }; 3163 3164 /** 3165 * qca_wlan_vendor_attr_external_acs_event: Attribute to vendor sub-command 3166 * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This attribute will be sent by 3167 * host driver. 3168 */ 3169 enum qca_wlan_vendor_attr_external_acs_event { 3170 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0, 3171 3172 /* This reason (u8) refers to enum qca_wlan_vendor_acs_select_reason. 3173 * This helps ACS module to understand why ACS needs to be started. 3174 */ 3175 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1, 3176 /* Flag attribute to indicate if driver supports spectral scanning */ 3177 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2, 3178 /* Flag attribute to indicate if 11ac is offloaded to firmware */ 3179 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3, 3180 /* Flag attribute to indicate if driver provides additional channel 3181 * capability as part of scan operation */ 3182 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4, 3183 /* Flag attribute to indicate interface status is UP */ 3184 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5, 3185 /* Operating mode (u8) of interface. Takes one of enum nl80211_iftype 3186 * values. */ 3187 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6, 3188 /* Channel width (u8). It takes one of enum nl80211_chan_width values. 3189 * This is the upper bound of channel width. ACS logic should try to get 3190 * a channel with the specified width and if not found, look for lower 3191 * values. 3192 */ 3193 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7, 3194 /* This (u8) will hold values of one of enum nl80211_bands */ 3195 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8, 3196 /* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode 3197 * values */ 3198 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9, 3199 /* Array of (u32) supported frequency list among which ACS should choose 3200 * best frequency. 3201 */ 3202 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10, 3203 /* Preferred channel list by the driver which will have array of nested 3204 * values as per enum qca_wlan_vendor_attr_pcl attribute. 3205 */ 3206 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11, 3207 /* Array of nested attribute for each channel. It takes attr as defined 3208 * in enum qca_wlan_vendor_external_acs_event_chan_info_attr. 3209 */ 3210 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12, 3211 3212 /* keep last */ 3213 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST, 3214 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX = 3215 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1, 3216 }; 3217 3218 /** 3219 * qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd 3220 * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carries a list of channels 3221 * in priority order as decided after ACS operation in userspace. 3222 */ 3223 enum qca_wlan_vendor_attr_external_acs_channels { 3224 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0, 3225 3226 /* One of reason code (u8) from enum qca_wlan_vendor_acs_select_reason 3227 */ 3228 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1, 3229 3230 /* Array of nested values for each channel with following attributes: 3231 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND, 3232 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY, 3233 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY, 3234 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0, 3235 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1, 3236 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH 3237 */ 3238 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2, 3239 /* This (u8) will hold values of one of enum nl80211_bands */ 3240 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3, 3241 /* Primary channel (u8) */ 3242 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4, 3243 /* Secondary channel (u8) used for HT 40 MHz channels */ 3244 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5, 3245 /* VHT seg0 channel (u8) */ 3246 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6, 3247 /* VHT seg1 channel (u8) */ 3248 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7, 3249 /* Channel width (u8). Takes one of enum nl80211_chan_width values. */ 3250 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8, 3251 3252 /* keep last */ 3253 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST, 3254 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX = 3255 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1 3256 }; 3257 3258 enum qca_chip_power_save_failure_reason { 3259 /* Indicates if the reason for the failure is due to a protocol 3260 * layer/module. 3261 */ 3262 QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0, 3263 /* Indicates if the reason for the failure is due to a hardware issue. 3264 */ 3265 QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1, 3266 }; 3267 3268 /** 3269 * qca_attr_chip_power_save_failure: Attributes to vendor subcmd 3270 * QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE. This carries the requisite 3271 * information leading to the power save failure. 3272 */ 3273 enum qca_attr_chip_power_save_failure { 3274 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0, 3275 /* Reason to cause the power save failure. 3276 * These reasons are represented by 3277 * enum qca_chip_power_save_failure_reason. 3278 */ 3279 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1, 3280 3281 /* keep last */ 3282 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST, 3283 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX = 3284 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1, 3285 }; 3286 3287 /** 3288 * qca_wlan_vendor_attr_nud_stats_set: Attributes to vendor subcmd 3289 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carries the requisite 3290 * information to start/stop the NUD statistics collection. 3291 */ 3292 enum qca_attr_nud_stats_set { 3293 QCA_ATTR_NUD_STATS_SET_INVALID = 0, 3294 3295 /* Flag to start/stop the NUD statistics collection. 3296 * Start - If included, Stop - If not included 3297 */ 3298 QCA_ATTR_NUD_STATS_SET_START = 1, 3299 /* IPv4 address of the default gateway (in network byte order) */ 3300 QCA_ATTR_NUD_STATS_GW_IPV4 = 2, 3301 3302 /* keep last */ 3303 QCA_ATTR_NUD_STATS_SET_LAST, 3304 QCA_ATTR_NUD_STATS_SET_MAX = 3305 QCA_ATTR_NUD_STATS_SET_LAST - 1, 3306 }; 3307 3308 /** 3309 * qca_attr_nud_stats_get: Attributes to vendor subcmd 3310 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET. This carries the requisite 3311 * NUD statistics collected when queried. 3312 */ 3313 enum qca_attr_nud_stats_get { 3314 QCA_ATTR_NUD_STATS_GET_INVALID = 0, 3315 /* ARP Request count from netdev */ 3316 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_FROM_NETDEV = 1, 3317 /* ARP Request count sent to lower MAC from upper MAC */ 3318 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TO_LOWER_MAC = 2, 3319 /* ARP Request count received by lower MAC from upper MAC */ 3320 QCA_ATTR_NUD_STATS_ARP_REQ_RX_COUNT_BY_LOWER_MAC = 3, 3321 /* ARP Request count successfully transmitted by the device */ 3322 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TX_SUCCESS = 4, 3323 /* ARP Response count received by lower MAC */ 3324 QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_LOWER_MAC = 5, 3325 /* ARP Response count received by upper MAC */ 3326 QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_UPPER_MAC = 6, 3327 /* ARP Response count delivered to netdev */ 3328 QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_TO_NETDEV = 7, 3329 /* ARP Response count delivered to netdev */ 3330 QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_OUT_OF_ORDER_DROP = 8, 3331 /* Flag indicating if the station's link to the AP is active. 3332 * Active Link - If included, Inactive link - If not included 3333 */ 3334 QCA_ATTR_NUD_STATS_AP_LINK_ACTIVE= 9, 3335 /* Flag indicating if there is any duplicate address detected (DAD). 3336 * Yes - If detected, No - If not detected. 3337 */ 3338 QCA_ATTR_NUD_STATS_IS_DAD = 9, 3339 3340 /* keep last */ 3341 QCA_ATTR_NUD_STATS_GET_LAST, 3342 QCA_ATTR_NUD_STATS_GET_MAX = 3343 QCA_ATTR_NUD_STATS_GET_LAST - 1, 3344 }; 3345 3346 enum qca_wlan_btm_candidate_status { 3347 QCA_STATUS_ACCEPT = 0, 3348 QCA_STATUS_REJECT_EXCESSIVE_FRAME_LOSS_EXPECTED = 1, 3349 QCA_STATUS_REJECT_EXCESSIVE_DELAY_EXPECTED = 2, 3350 QCA_STATUS_REJECT_INSUFFICIENT_QOS_CAPACITY = 3, 3351 QCA_STATUS_REJECT_LOW_RSSI = 4, 3352 QCA_STATUS_REJECT_HIGH_INTERFERENCE = 5, 3353 QCA_STATUS_REJECT_UNKNOWN = 6, 3354 }; 3355 3356 enum qca_wlan_vendor_attr_btm_candidate_info { 3357 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_INVALID = 0, 3358 3359 /* 6-byte MAC address representing the BSSID of transition candidate */ 3360 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID = 1, 3361 /* Unsigned 32-bit value from enum qca_wlan_btm_candidate_status 3362 * returned by the driver. It says whether the BSSID provided in 3363 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID is acceptable by 3364 * the driver, if not it specifies the reason for rejection. 3365 * Note that the user-space can overwrite the transition reject reason 3366 * codes provided by driver based on more information. 3367 */ 3368 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS = 2, 3369 3370 /* keep last */ 3371 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST, 3372 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_MAX = 3373 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST - 1, 3374 }; 3375 3376 enum qca_attr_trace_level { 3377 QCA_ATTR_TRACE_LEVEL_INVALID = 0, 3378 /* 3379 * Nested array of the following attributes: 3380 * QCA_ATTR_TRACE_LEVEL_MODULE, 3381 * QCA_ATTR_TRACE_LEVEL_MASK. 3382 */ 3383 QCA_ATTR_TRACE_LEVEL_PARAM = 1, 3384 /* 3385 * Specific QCA host driver module. Please refer to the QCA host 3386 * driver implementation to get the specific module ID. 3387 */ 3388 QCA_ATTR_TRACE_LEVEL_MODULE = 2, 3389 /* Different trace level masks represented in the QCA host driver. */ 3390 QCA_ATTR_TRACE_LEVEL_MASK = 3, 3391 3392 /* keep last */ 3393 QCA_ATTR_TRACE_LEVEL_AFTER_LAST, 3394 QCA_ATTR_TRACE_LEVEL_MAX = 3395 QCA_ATTR_TRACE_LEVEL_AFTER_LAST - 1, 3396 }; 3397 3398 /** 3399 * enum qca_wlan_vendor_attr_get_he_capabilities - IEEE 802.11ax HE capabilities 3400 */ 3401 enum qca_wlan_vendor_attr_get_he_capabilities { 3402 QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_INVALID = 0, 3403 /* Whether HE capabilities is supported 3404 * (u8 attribute: 0 = not supported, 1 = supported) */ 3405 QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED = 1, 3406 /* HE PHY capabilities, array of 3 u32 values */ 3407 QCA_WLAN_VENDOR_ATTR_PHY_CAPAB = 2, 3408 /* HE MAC capabilities (u32 attribute) */ 3409 QCA_WLAN_VENDOR_ATTR_MAC_CAPAB = 3, 3410 /* HE MCS map (u32 attribute) */ 3411 QCA_WLAN_VENDOR_ATTR_HE_MCS = 4, 3412 /* Number of SS (u32 attribute) */ 3413 QCA_WLAN_VENDOR_ATTR_NUM_SS = 5, 3414 /* RU count (u32 attribute) */ 3415 QCA_WLAN_VENDOR_ATTR_RU_IDX_MASK = 6, 3416 /* PPE threshold data, array of 8 u32 values */ 3417 QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD = 7, 3418 3419 /* keep last */ 3420 QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST, 3421 QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_MAX = 3422 QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST - 1, 3423 }; 3424 3425 #endif /* QCA_VENDOR_H */ 3426
