Home | History | Annotate | Download | only in scripttempl 
      1 # Copyright (C) 2014 Free Software Foundation, Inc.
      2 # 
      3 # Copying and distribution of this file, with or without modification,
      4 # are permitted in any medium without royalty provided the copyright
      5 # notice and this notice are preserved.
      6 #
      7 # Unusual variables checked by this code:
      8 #	NOP - four byte opcode for no-op (defaults to 0)
      9 #	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
     10 #	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
     11 #		(e.g., .PARISC.global)
     12 #	OTHER_SECTIONS - at the end
     13 #	EXECUTABLE_SYMBOLS - symbols that must be defined for an
     14 #		executable (e.g., _DYNAMIC_LINK)
     15 #	TEXT_START_SYMBOLS - symbols that appear at the start of the
     16 #		.text section.
     17 #	DATA_START_SYMBOLS - symbols that appear at the start of the
     18 #		.data section.
     19 #	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
     20 #		.bss section besides __bss_start.
     21 #	EMBEDDED - whether this is for an embedded system. 
     22 #
     23 # When adding sections, do note that the names of some sections are used
     24 # when specifying the start address of the next.
     25 #
     26 test -z "$ENTRY" && ENTRY=_start
     27 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
     28 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
     29 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
     30 test "$LD_FLAG" = "N" && DATA_ADDR=.
     31 
     32 CTOR=".ctors ${CONSTRUCTING-0} : 
     33   {
     34     ${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
     35     ${CONSTRUCTING+${CTOR_START}}
     36     KEEP (*(.ctors))
     37 
     38     ${CONSTRUCTING+${CTOR_END}}
     39     ${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
     40   } ${RELOCATING+ > ${TEXT_MEMORY}}"
     41 
     42 DTOR="  .dtors	${CONSTRUCTING-0} :
     43   {
     44     ${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
     45     KEEP (*(.dtors))
     46     ${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
     47   } ${RELOCATING+ > ${TEXT_MEMORY}}"
     48 
     49 
     50 VECTORS="
     51   /* If the 'vectors_addr' symbol is defined, it indicates the start address
     52      of interrupt vectors.  This depends on the 68HC11 operating mode:
     53 
     54 			Addr
     55      Single chip	0xffc0
     56      Extended mode	0xffc0
     57      Bootstrap		0x00c0
     58      Test		0xbfc0
     59 
     60      In general, the vectors address is 0xffc0.  This can be overriden 
     61      with the '-defsym vectors_addr=0xbfc0' ld option.
     62 
     63      Note: for the bootstrap mode, the interrupt vectors are at 0xbfc0 but
     64      they are redirected to 0x00c0 by the internal PROM.  Application's vectors
     65      must also consist of jump instructions (see Motorola's manual).  */
     66 
     67   PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xffc0);
     68   .vectors DEFINED (vectors_addr) ? vectors_addr : 0xffc0 :
     69   {
     70     KEEP (*(.vectors))
     71   }"
     72 
     73 #
     74 # We provide two emulations: a fixed on that defines some memory banks
     75 # and a configurable one that includes a user provided memory definition.
     76 #
     77 case $GENERIC_BOARD in
     78   yes|1|YES)
     79 	MEMORY_DEF="
     80 /* Get memory banks definition from some user configuration file.
     81    This file must be located in some linker directory (search path
     82    with -L<dir>). See fixed memory banks emulation script.  */
     83 INCLUDE memory.x;
     84 "
     85 	;;
     86   *)
     87 MEMORY_DEF="
     88 /* Fixed definition of the available memory banks.
     89    See generic emulation script for a user defined configuration.  */
     90 MEMORY
     91 {
     92   page0 (rwx) : ORIGIN = 0x0, LENGTH = 256
     93   text  (rx)  : ORIGIN = ${ROM_START_ADDR}, LENGTH = ${ROM_SIZE}
     94   data        : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
     95   eeprom      : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
     96 }
     97 
     98 /* Setup the stack on the top of the data memory bank.  */
     99 PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
    100 "
    101 	;;
    102 esac
    103 
    104 STARTUP_CODE="
    105     /* Startup code.  */
    106     KEEP (*(.install0))	/* Section should setup the stack pointer.  */
    107     KEEP (*(.install1))	/* Place holder for applications.  */
    108     KEEP (*(.install2))	/* Optional installation of data sections in RAM.  */
    109     KEEP (*(.install3))	/* Place holder for applications.  */
    110     KEEP (*(.install4))	/* Section that calls the main.  */
    111 "
    112 
    113 FINISH_CODE="
    114     /* Finish code.  */
    115     KEEP (*(.fini0))	/* Beginning of finish code (_exit symbol).  */
    116     KEEP (*(.fini1))	/* Place holder for applications.  */
    117     KEEP (*(.fini2))	/* C++ destructors.  */
    118     KEEP (*(.fini3))	/* Place holder for applications.  */
    119     KEEP (*(.fini4))	/* Runtime exit.  */
    120 "
    121 
    122 PRE_COMPUTE_DATA_SIZE="
    123 /* SCz: this does not work yet... This is supposed to force the loading
    124    of _map_data.o (from libgcc.a) when the .data section is not empty.
    125    By doing so, this should bring the code that copies the .data section
    126    from ROM to RAM at init time.
    127 
    128   ___pre_comp_data_size = SIZEOF(.data);
    129   __install_data_sections = ___pre_comp_data_size > 0 ?
    130 		__map_data_sections : 0;
    131 */
    132 "
    133 
    134 INSTALL_RELOC="
    135   .install0 0 : { *(.install0) }
    136   .install1 0 : { *(.install1) }
    137   .install2 0 : { *(.install2) }
    138   .install3 0 : { *(.install3) }
    139   .install4 0 : { *(.install4) }
    140 "
    141 
    142 FINISH_RELOC="
    143   .fini0 0 : { *(.fini0) }
    144   .fini1 0 : { *(.fini1) }
    145   .fini2 0 : { *(.fini2) }
    146   .fini3 0 : { *(.fini3) }
    147   .fini4 0 : { *(.fini4) }
    148 "
    149 
    150 BSS_DATA_RELOC="
    151   .data1 0 : { *(.data1) }
    152 
    153   /* We want the small data sections together, so single-instruction offsets
    154      can access them all, and initialized data all before uninitialized, so
    155      we can shorten the on-disk segment size.  */
    156   .sdata   0 : { *(.sdata) }
    157   .sbss    0 : { *(.sbss) }
    158   .scommon 0 : { *(.scommon) }
    159 "
    160 
    161 SOFT_REGS_RELOC="
    162   .softregs 0 : { *(.softregs) }
    163 "
    164 
    165 cat <<EOF
    166 ${RELOCATING+/* Linker script for 68HC12 executable (PROM).  */}
    167 ${RELOCATING-/* Linker script for 68HC12 object file (ld -r).  */}
    168 
    169 /* Copyright (C) 2014 Free Software Foundation, Inc.
    170 
    171    Copying and distribution of this script, with or without modification,
    172    are permitted in any medium without royalty provided the copyright
    173    notice and this notice are preserved.  */
    174 
    175 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
    176 	      "${LITTLE_OUTPUT_FORMAT}")
    177 OUTPUT_ARCH(${OUTPUT_ARCH})
    178 ${RELOCATING+ENTRY(${ENTRY})}
    179 
    180 ${RELOCATING+${LIB_SEARCH_DIRS}}
    181 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
    182 ${RELOCATING+${MEMORY_DEF}}
    183 
    184 SECTIONS
    185 {
    186   .hash        ${RELOCATING-0} : { *(.hash)		}
    187   .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
    188   .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
    189   .gnu.version		${RELOCATING-0} : { *(.gnu.version) }
    190   .gnu.version_d	${RELOCATING-0} : { *(.gnu.version_d) }
    191   .gnu.version_r	${RELOCATING-0} : { *(.gnu.version_r) }
    192 
    193   .rel.text    ${RELOCATING-0} :
    194     {
    195       *(.rel.text)
    196       ${RELOCATING+*(.rel.text.*)}
    197       ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
    198     }
    199   .rela.text   ${RELOCATING-0} :
    200     {
    201       *(.rela.text)
    202       ${RELOCATING+*(.rela.text.*)}
    203       ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
    204     }
    205   .rel.data    ${RELOCATING-0} :
    206     {
    207       *(.rel.data)
    208       ${RELOCATING+*(.rel.data.*)}
    209       ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
    210     }
    211   .rela.data   ${RELOCATING-0} :
    212     {
    213       *(.rela.data)
    214       ${RELOCATING+*(.rela.data.*)}
    215       ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
    216     }
    217   .rel.rodata  ${RELOCATING-0} :
    218     {
    219       *(.rel.rodata)
    220       ${RELOCATING+*(.rel.rodata.*)}
    221       ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
    222     }
    223   .rela.rodata ${RELOCATING-0} :
    224     {
    225       *(.rela.rodata)
    226       ${RELOCATING+*(.rela.rodata.*)}
    227       ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
    228     }
    229   .rel.sdata   ${RELOCATING-0} :
    230     {
    231       *(.rel.sdata)
    232       ${RELOCATING+*(.rel.sdata.*)}
    233       ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
    234     }
    235   .rela.sdata   ${RELOCATING-0} :
    236     {
    237       *(.rela.sdata)
    238       ${RELOCATING+*(.rela.sdata.*)}
    239       ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
    240     }
    241   .rel.sbss    ${RELOCATING-0} :
    242     { 
    243       *(.rel.sbss)
    244       ${RELOCATING+*(.rel.sbss.*)}
    245       ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
    246     }
    247   .rela.sbss   ${RELOCATING-0} :
    248     {
    249       *(.rela.sbss)
    250       ${RELOCATING+*(.rela.sbss.*)}
    251       ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
    252     }
    253   .rel.bss     ${RELOCATING-0} : 
    254     { 
    255       *(.rel.bss)
    256       ${RELOCATING+*(.rel.bss.*)}
    257       ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
    258     }
    259   .rela.bss    ${RELOCATING-0} : 
    260     { 
    261       *(.rela.bss)
    262       ${RELOCATING+*(.rela.bss.*)}
    263       ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
    264     }
    265   .rel.stext		${RELOCATING-0} : { *(.rel.stest) }
    266   .rela.stext		${RELOCATING-0} : { *(.rela.stest) }
    267   .rel.etext		${RELOCATING-0} : { *(.rel.etest) }
    268   .rela.etext		${RELOCATING-0} : { *(.rela.etest) }
    269   .rel.sdata		${RELOCATING-0} : { *(.rel.sdata) }
    270   .rela.sdata		${RELOCATING-0} : { *(.rela.sdata) }
    271   .rel.edata		${RELOCATING-0} : { *(.rel.edata) }
    272   .rela.edata		${RELOCATING-0} : { *(.rela.edata) }
    273   .rel.eit_v		${RELOCATING-0} : { *(.rel.eit_v) }
    274   .rela.eit_v		${RELOCATING-0} : { *(.rela.eit_v) }
    275   .rel.ebss		${RELOCATING-0} : { *(.rel.ebss) }
    276   .rela.ebss		${RELOCATING-0} : { *(.rela.ebss) }
    277   .rel.srodata		${RELOCATING-0} : { *(.rel.srodata) }
    278   .rela.srodata		${RELOCATING-0} : { *(.rela.srodata) }
    279   .rel.erodata		${RELOCATING-0} : { *(.rel.erodata) }
    280   .rela.erodata		${RELOCATING-0} : { *(.rela.erodata) }
    281   .rel.got		${RELOCATING-0} : { *(.rel.got) }
    282   .rela.got		${RELOCATING-0} : { *(.rela.got) }
    283   .rel.ctors		${RELOCATING-0} : { *(.rel.ctors) }
    284   .rela.ctors		${RELOCATING-0} : { *(.rela.ctors) }
    285   .rel.dtors		${RELOCATING-0} : { *(.rel.dtors) }
    286   .rela.dtors		${RELOCATING-0} : { *(.rela.dtors) }
    287   .rel.init		${RELOCATING-0} : { *(.rel.init) }
    288   .rela.init		${RELOCATING-0} : { *(.rela.init) }
    289   .rel.fini		${RELOCATING-0} : { *(.rel.fini) }
    290   .rela.fini		${RELOCATING-0} : { *(.rela.fini) }
    291   .rel.plt		${RELOCATING-0} : { *(.rel.plt) }
    292   .rela.plt		${RELOCATING-0} : { *(.rela.plt) }
    293 
    294   /* Concatenate .page0 sections.  Put them in the page0 memory bank
    295      unless we are creating a relocatable file.  */
    296   .page0 :
    297   {
    298     *(.page0)
    299   } ${RELOCATING+ > page0}
    300 
    301   /* Start of text section.  */
    302   .stext ${RELOCATING-0} : 
    303   {
    304     *(.stext)
    305   } ${RELOCATING+ > ${TEXT_MEMORY}}
    306 
    307   .init	${RELOCATING-0} :
    308   {
    309     *(.init) 
    310   } ${RELOCATING+=${NOP-0}}
    311 
    312   ${RELOCATING-${INSTALL_RELOC}}
    313   ${RELOCATING-${FINISH_RELOC}}
    314 
    315   .text ${RELOCATING-0}:
    316   {
    317     /* Put startup code at beginning so that _start keeps same address.  */
    318     ${RELOCATING+${STARTUP_CODE}}
    319 
    320     ${RELOCATING+*(.init)}
    321     *(.text)
    322     ${RELOCATING+*(.text.*)}
    323     /* .gnu.warning sections are handled specially by elf32.em.  */
    324     *(.gnu.warning)
    325     ${RELOCATING+*(.gnu.linkonce.t.*)}
    326     ${RELOCATING+*(.tramp)}
    327     ${RELOCATING+*(.tramp.*)}
    328 
    329     ${RELOCATING+${FINISH_CODE}}
    330 
    331     ${RELOCATING+_etext = .;}
    332     ${RELOCATING+PROVIDE (etext = .);}
    333     ${RELOCATING+. = ALIGN(2);}
    334   } ${RELOCATING+ > ${TEXT_MEMORY} =0xa7a7a7a7}
    335 
    336   .eh_frame ${RELOCATING-0} :
    337   {
    338     KEEP (*(.eh_frame))
    339   } ${RELOCATING+ > ${TEXT_MEMORY}}
    340 
    341   .gcc_except_table ${RELOCATING-0} :
    342   {
    343     *(.gcc_except_table)
    344   } ${RELOCATING+ > ${TEXT_MEMORY}}
    345 
    346   .rodata  ${RELOCATING-0} :
    347   {
    348     *(.rodata)
    349     ${RELOCATING+*(.rodata.*)}
    350     ${RELOCATING+*(.gnu.linkonce.r*)}
    351     ${RELOCATING+. = ALIGN(2);}
    352   } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
    353 
    354   .rodata1 ${RELOCATING-0} :
    355   {
    356     *(.rodata1)
    357     ${RELOCATING+. = ALIGN(2);}
    358   } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
    359 
    360   /* Constructor and destructor tables are in ROM.  */
    361   ${RELOCATING+${CTOR}}
    362   ${RELOCATING+${DTOR}}
    363 
    364   .jcr ${RELOCATING-0} :
    365   {
    366     KEEP (*(.jcr))
    367   } ${RELOCATING+ > ${TEXT_MEMORY}}
    368 
    369   /* Start of the data section image in ROM.  */
    370   ${RELOCATING+__data_image = .;}
    371   ${RELOCATING+PROVIDE (__data_image = .);}
    372 
    373   /* All read-only sections that normally go in PROM must be above.
    374      We construct the DATA image section in PROM at end of all these
    375      read-only sections.  The data image must be copied at init time.
    376      Refer to GNU ld, Section 3.6.8.2 Output Section LMA.  */
    377   .data  ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
    378   {
    379     ${RELOCATING+__data_section_start = .;}
    380     ${RELOCATING+PROVIDE (__data_section_start = .);}
    381 
    382     ${RELOCATING+${DATA_START_SYMBOLS}}
    383     ${RELOCATING+*(.sdata)}
    384     *(.data)
    385     ${RELOCATING+*(.data.*)}
    386     ${RELOCATING+*(.data1)}
    387     ${RELOCATING+*(.gnu.linkonce.d.*)}
    388     ${CONSTRUCTING+CONSTRUCTORS}
    389 
    390     ${RELOCATING+_edata  =  .;}
    391     ${RELOCATING+PROVIDE (edata = .);}
    392     ${RELOCATING+. = ALIGN(2);}
    393   } ${RELOCATING+ > ${DATA_MEMORY} =0xffffffff}
    394 
    395   ${RELOCATING+__data_section_size = SIZEOF(.data);}
    396   ${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
    397   ${RELOCATING+__data_image_end = __data_image + __data_section_size;}
    398 
    399   ${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
    400 
    401   /* .install ${RELOCATING-0}:
    402   {
    403     . = _data_image_end;
    404   } ${RELOCATING+ > ${TEXT_MEMORY}} */
    405 
    406   /* Relocation for some bss and data sections.  */
    407   ${RELOCATING-${BSS_DATA_RELOC}}
    408   ${RELOCATING-${SOFT_REGS_RELOC}}
    409 
    410   .bss ${RELOCATING-0} :
    411   {
    412     ${RELOCATING+__bss_start = .;}
    413     ${RELOCATING+*(.softregs)}
    414     ${RELOCATING+*(.sbss)}
    415     ${RELOCATING+*(.scommon)}
    416 
    417     *(.dynbss)
    418     *(.bss)
    419     ${RELOCATING+*(.bss.*)}
    420     ${RELOCATING+*(.gnu.linkonce.b.*)}
    421     *(COMMON)
    422     ${RELOCATING+PROVIDE (_end = .);}
    423   } ${RELOCATING+ > ${DATA_MEMORY}}
    424   ${RELOCATING+__bss_size = SIZEOF(.bss);}
    425   ${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
    426 
    427   .eeprom ${RELOCATING-0} :
    428   {
    429     *(.eeprom)
    430     *(.eeprom.*)
    431   } ${RELOCATING+ > ${EEPROM_MEMORY}}
    432 
    433   ${RELOCATING+${VECTORS}}
    434 
    435   /* Stabs debugging sections.  */
    436   .stab		 0 : { *(.stab) }
    437   .stabstr	 0 : { *(.stabstr) }
    438   .stab.excl	 0 : { *(.stab.excl) }
    439   .stab.exclstr	 0 : { *(.stab.exclstr) }
    440   .stab.index	 0 : { *(.stab.index) }
    441   .stab.indexstr 0 : { *(.stab.indexstr) }
    442 
    443   .comment	 0 : { *(.comment) }
    444 
    445 EOF
    446 
    447 . $srcdir/scripttempl/DWARF.sc
    448 
    449 cat <<EOF
    450 }
    451 EOF
    452