1 /** @file 2 EFI_EXT_SCSI_PASS_THRU_PROTOCOL as defined in UEFI 2.0. 3 This protocol provides services that allow SCSI Pass Thru commands 4 to be sent to SCSI devices attached to a SCSI channel. 5 6 Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR> 7 This program and the accompanying materials 8 are licensed and made available under the terms and conditions of the BSD License 9 which accompanies this distribution. The full text of the license may be found at 10 http://opensource.org/licenses/bsd-license.php 11 12 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 13 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 14 15 **/ 16 17 #ifndef __EXT_SCSI_PASS_THROUGH_PROTOCOL_H__ 18 #define __EXT_SCSI_PASS_THROUGH_PROTOCOL_H__ 19 20 #define EFI_EXT_SCSI_PASS_THRU_PROTOCOL_GUID \ 21 { \ 22 0x143b7632, 0xb81b, 0x4cb7, {0xab, 0xd3, 0xb6, 0x25, 0xa5, 0xb9, 0xbf, 0xfe } \ 23 } 24 25 typedef struct _EFI_EXT_SCSI_PASS_THRU_PROTOCOL EFI_EXT_SCSI_PASS_THRU_PROTOCOL; 26 27 #define TARGET_MAX_BYTES 0x10 28 29 #define EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL 0x0001 30 #define EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL 0x0002 31 #define EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004 32 33 // 34 // DataDirection 35 // 36 #define EFI_EXT_SCSI_DATA_DIRECTION_READ 0 37 #define EFI_EXT_SCSI_DATA_DIRECTION_WRITE 1 38 #define EFI_EXT_SCSI_DATA_DIRECTION_BIDIRECTIONAL 2 39 // 40 // HostAdapterStatus 41 // 42 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OK 0x00 43 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 44 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT 0x0b 45 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d 46 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_BUS_RESET 0x0e 47 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_PARITY_ERROR 0x0f 48 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 49 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 50 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 51 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_BUS_FREE 0x13 52 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 53 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OTHER 0x7f 54 // 55 // TargetStatus 56 // 57 #define EFI_EXT_SCSI_STATUS_TARGET_GOOD 0x00 58 #define EFI_EXT_SCSI_STATUS_TARGET_CHECK_CONDITION 0x02 59 #define EFI_EXT_SCSI_STATUS_TARGET_CONDITION_MET 0x04 60 #define EFI_EXT_SCSI_STATUS_TARGET_BUSY 0x08 61 #define EFI_EXT_SCSI_STATUS_TARGET_INTERMEDIATE 0x10 62 #define EFI_EXT_SCSI_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 63 #define EFI_EXT_SCSI_STATUS_TARGET_RESERVATION_CONFLICT 0x18 64 #define EFI_EXT_SCSI_STATUS_TARGET_TASK_SET_FULL 0x28 65 #define EFI_EXT_SCSI_STATUS_TARGET_ACA_ACTIVE 0x30 66 #define EFI_EXT_SCSI_STATUS_TARGET_TASK_ABORTED 0x40 67 68 typedef struct { 69 /// 70 /// The Target ID of the host adapter on the SCSI channel. 71 /// 72 UINT32 AdapterId; 73 /// 74 /// Additional information on the attributes of the SCSI channel. 75 /// 76 UINT32 Attributes; 77 /// 78 /// Supplies the alignment requirement for any buffer used in a data transfer. 79 /// 80 UINT32 IoAlign; 81 } EFI_EXT_SCSI_PASS_THRU_MODE; 82 83 typedef struct { 84 /// 85 /// The timeout, in 100 ns units, to use for the execution of this SCSI 86 /// Request Packet. A Timeout value of 0 means that this function 87 /// will wait indefinitely for the SCSI Request Packet to execute. If 88 /// Timeout is greater than zero, then this function will return 89 /// EFI_TIMEOUT if the time required to execute the SCSI 90 /// Request Packet is greater than Timeout. 91 /// 92 UINT64 Timeout; 93 /// 94 /// A pointer to the data buffer to transfer between the SCSI 95 /// controller and the SCSI device for read and bidirectional commands. 96 /// 97 VOID *InDataBuffer; 98 /// 99 /// A pointer to the data buffer to transfer between the SCSI 100 /// controller and the SCSI device for write or bidirectional commands. 101 /// 102 VOID *OutDataBuffer; 103 /// 104 /// A pointer to the sense data that was generated by the execution of 105 /// the SCSI Request Packet. 106 /// 107 VOID *SenseData; 108 /// 109 /// A pointer to buffer that contains the Command Data Block to 110 /// send to the SCSI device specified by Target and Lun. 111 /// 112 VOID *Cdb; 113 /// 114 /// On Input, the size, in bytes, of InDataBuffer. On output, the 115 /// number of bytes transferred between the SCSI controller and the SCSI device. 116 /// 117 UINT32 InTransferLength; 118 /// 119 /// On Input, the size, in bytes of OutDataBuffer. On Output, the 120 /// Number of bytes transferred between SCSI Controller and the SCSI device. 121 /// 122 UINT32 OutTransferLength; 123 /// 124 /// The length, in bytes, of the buffer Cdb. The standard values are 6, 125 /// 10, 12, and 16, but other values are possible if a variable length CDB is used. 126 /// 127 UINT8 CdbLength; 128 /// 129 /// The direction of the data transfer. 0 for reads, 1 for writes. A 130 /// value of 2 is Reserved for Bi-Directional SCSI commands. 131 /// 132 UINT8 DataDirection; 133 /// 134 /// The status of the host adapter specified by This when the SCSI 135 /// Request Packet was executed on the target device. 136 /// 137 UINT8 HostAdapterStatus; 138 /// 139 /// The status returned by the device specified by Target and Lun 140 /// when the SCSI Request Packet was executed. 141 /// 142 UINT8 TargetStatus; 143 /// 144 /// On input, the length in bytes of the SenseData buffer. On 145 /// output, the number of bytes written to the SenseData buffer. 146 /// 147 UINT8 SenseDataLength; 148 } EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET; 149 150 /** 151 Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function 152 supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the 153 nonblocking I/O functionality is optional. 154 155 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. 156 @param Target The Target is an array of size TARGET_MAX_BYTES and it represents 157 the id of the SCSI device to send the SCSI Request Packet. Each 158 transport driver may choose to utilize a subset of this size to suit the needs 159 of transport target representation. For example, a Fibre Channel driver 160 may use only 8 bytes (WWN) to represent an FC target. 161 @param Lun The LUN of the SCSI device to send the SCSI Request Packet. 162 @param Packet A pointer to the SCSI Request Packet to send to the SCSI device 163 specified by Target and Lun. 164 @param Event If nonblocking I/O is not supported then Event is ignored, and blocking 165 I/O is performed. If Event is NULL, then blocking I/O is performed. If 166 Event is not NULL and non blocking I/O is supported, then 167 nonblocking I/O is performed, and Event will be signaled when the 168 SCSI Request Packet completes. 169 170 @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional 171 commands, InTransferLength bytes were transferred from 172 InDataBuffer. For write and bi-directional commands, 173 OutTransferLength bytes were transferred by 174 OutDataBuffer. 175 @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that 176 could be transferred is returned in InTransferLength. For write 177 and bi-directional commands, OutTransferLength bytes were 178 transferred by OutDataBuffer. 179 @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many 180 SCSI Request Packets already queued. The caller may retry again later. 181 @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request 182 Packet. 183 @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid. 184 @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported 185 by the host adapter. This includes the case of Bi-directional SCSI 186 commands not supported by the implementation. The SCSI Request 187 Packet was not sent, so no additional status information is available. 188 @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. 189 190 **/ 191 typedef 192 EFI_STATUS 193 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_PASSTHRU)( 194 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, 195 IN UINT8 *Target, 196 IN UINT64 Lun, 197 IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, 198 IN EFI_EVENT Event OPTIONAL 199 ); 200 201 /** 202 Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These 203 can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal 204 Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the 205 Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI 206 channel. 207 208 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. 209 @param Target On input, a pointer to the Target ID (an array of size 210 TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. 211 On output, a pointer to the Target ID (an array of 212 TARGET_MAX_BYTES) of the next SCSI device present on a SCSI 213 channel. An input value of 0xF(all bytes in the array are 0xF) in the 214 Target array retrieves the Target ID of the first SCSI device present on a 215 SCSI channel. 216 @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI 217 channel. On output, a pointer to the LUN of the next SCSI device present 218 on a SCSI channel. 219 220 @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI 221 channel was returned in Target and Lun. 222 @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were 223 not returned on a previous call to GetNextTargetLun(). 224 @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. 225 226 **/ 227 typedef 228 EFI_STATUS 229 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET_LUN)( 230 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, 231 IN OUT UINT8 **Target, 232 IN OUT UINT64 *Lun 233 ); 234 235 /** 236 Used to allocate and build a device path node for a SCSI device on a SCSI channel. 237 238 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. 239 @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the 240 Target ID of the SCSI device for which a device path node is to be 241 allocated and built. Transport drivers may chose to utilize a subset of 242 this size to suit the representation of targets. For example, a Fibre 243 Channel driver may use only 8 bytes (WWN) in the array to represent a 244 FC target. 245 @param Lun The LUN of the SCSI device for which a device path node is to be 246 allocated and built. 247 @param DevicePath A pointer to a single device path node that describes the SCSI device 248 specified by Target and Lun. This function is responsible for 249 allocating the buffer DevicePath with the boot service 250 AllocatePool(). It is the caller's responsibility to free 251 DevicePath when the caller is finished with DevicePath. 252 253 @retval EFI_SUCCESS The device path node that describes the SCSI device specified by 254 Target and Lun was allocated and returned in 255 DevicePath. 256 @retval EFI_INVALID_PARAMETER DevicePath is NULL. 257 @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist 258 on the SCSI channel. 259 @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. 260 261 **/ 262 typedef 263 EFI_STATUS 264 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_BUILD_DEVICE_PATH)( 265 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, 266 IN UINT8 *Target, 267 IN UINT64 Lun, 268 IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath 269 ); 270 271 /** 272 Used to translate a device path node to a Target ID and LUN. 273 274 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. 275 @param DevicePath A pointer to a single device path node that describes the SCSI device 276 on the SCSI channel. 277 @param Target A pointer to the Target Array which represents the ID of a SCSI device 278 on the SCSI channel. 279 @param Lun A pointer to the LUN of a SCSI device on the SCSI channel. 280 281 @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and 282 LUN, and they were returned in Target and Lun. 283 @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL. 284 @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN 285 does not exist. 286 @retval EFI_UNSUPPORTED This driver does not support the device path node type in 287 DevicePath. 288 289 **/ 290 typedef 291 EFI_STATUS 292 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_GET_TARGET_LUN)( 293 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, 294 IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, 295 OUT UINT8 **Target, 296 OUT UINT64 *Lun 297 ); 298 299 /** 300 Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel. 301 302 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. 303 304 @retval EFI_SUCCESS The SCSI channel was reset. 305 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel. 306 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel. 307 @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation. 308 309 **/ 310 typedef 311 EFI_STATUS 312 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_RESET_CHANNEL)( 313 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This 314 ); 315 316 /** 317 Resets a SCSI logical unit that is connected to a SCSI channel. 318 319 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. 320 @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the 321 target port ID of the SCSI device containing the SCSI logical unit to 322 reset. Transport drivers may chose to utilize a subset of this array to suit 323 the representation of their targets. 324 @param Lun The LUN of the SCSI device to reset. 325 326 @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset. 327 @retval EFI_INVALID_PARAMETER Target or Lun is NULL. 328 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device 329 specified by Target and Lun. 330 @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation. 331 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device 332 specified by Target and Lun. 333 334 **/ 335 typedef 336 EFI_STATUS 337 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_RESET_TARGET_LUN)( 338 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, 339 IN UINT8 *Target, 340 IN UINT64 Lun 341 ); 342 343 /** 344 Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either 345 be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs 346 for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to 347 see if a SCSI device is actually present at that location on the SCSI channel. 348 349 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. 350 @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. 351 On output, a pointer to the Target ID (an array of 352 TARGET_MAX_BYTES) of the next SCSI device present on a SCSI 353 channel. An input value of 0xF(all bytes in the array are 0xF) in the 354 Target array retrieves the Target ID of the first SCSI device present on a 355 SCSI channel. 356 357 @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI 358 channel was returned in Target. 359 @retval EFI_INVALID_PARAMETER Target or Lun is NULL. 360 @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not 361 returned on a previous call to GetNextTarget(). 362 @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. 363 364 **/ 365 typedef 366 EFI_STATUS 367 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET)( 368 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, 369 IN OUT UINT8 **Target 370 ); 371 372 /// 373 /// The EFI_EXT_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel 374 /// and the ability to send SCI Request Packets to any SCSI device attached to 375 /// that SCSI channel. The information includes the Target ID of the host controller 376 /// on the SCSI channel and the attributes of the SCSI channel. 377 /// 378 struct _EFI_EXT_SCSI_PASS_THRU_PROTOCOL { 379 /// 380 /// A pointer to the EFI_EXT_SCSI_PASS_THRU_MODE data for this SCSI channel. 381 /// 382 EFI_EXT_SCSI_PASS_THRU_MODE *Mode; 383 EFI_EXT_SCSI_PASS_THRU_PASSTHRU PassThru; 384 EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET_LUN GetNextTargetLun; 385 EFI_EXT_SCSI_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath; 386 EFI_EXT_SCSI_PASS_THRU_GET_TARGET_LUN GetTargetLun; 387 EFI_EXT_SCSI_PASS_THRU_RESET_CHANNEL ResetChannel; 388 EFI_EXT_SCSI_PASS_THRU_RESET_TARGET_LUN ResetTargetLun; 389 EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET GetNextTarget; 390 }; 391 392 extern EFI_GUID gEfiExtScsiPassThruProtocolGuid; 393 394 #endif 395
