1 /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ 2 /* 3 * ipmi.h 4 * 5 * MontaVista IPMI interface 6 * 7 * Author: MontaVista Software, Inc. 8 * Corey Minyard <minyard (at) mvista.com> 9 * source (at) mvista.com 10 * 11 * Copyright 2002 MontaVista Software Inc. 12 * 13 * This program is free software; you can redistribute it and/or modify it 14 * under the terms of the GNU General Public License as published by the 15 * Free Software Foundation; either version 2 of the License, or (at your 16 * option) any later version. 17 * 18 * 19 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 20 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 21 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 24 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 25 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 26 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 27 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 28 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 * 30 * You should have received a copy of the GNU General Public License along 31 * with this program; if not, write to the Free Software Foundation, Inc., 32 * 675 Mass Ave, Cambridge, MA 02139, USA. 33 */ 34 35 #ifndef _UAPI__LINUX_IPMI_H 36 #define _UAPI__LINUX_IPMI_H 37 38 #include <linux/ipmi_msgdefs.h> 39 #include <linux/compiler.h> 40 41 /* 42 * This file describes an interface to an IPMI driver. You have to 43 * have a fairly good understanding of IPMI to use this, so go read 44 * the specs first before actually trying to do anything. 45 * 46 * With that said, this driver provides a multi-user interface to the 47 * IPMI driver, and it allows multiple IPMI physical interfaces below 48 * the driver. The physical interfaces bind as a lower layer on the 49 * driver. They appear as interfaces to the application using this 50 * interface. 51 * 52 * Multi-user means that multiple applications may use the driver, 53 * send commands, receive responses, etc. The driver keeps track of 54 * commands the user sends and tracks the responses. The responses 55 * will go back to the application that send the command. If the 56 * response doesn't come back in time, the driver will return a 57 * timeout error response to the application. Asynchronous events 58 * from the BMC event queue will go to all users bound to the driver. 59 * The incoming event queue in the BMC will automatically be flushed 60 * if it becomes full and it is queried once a second to see if 61 * anything is in it. Incoming commands to the driver will get 62 * delivered as commands. 63 */ 64 65 /* 66 * This is an overlay for all the address types, so it's easy to 67 * determine the actual address type. This is kind of like addresses 68 * work for sockets. 69 */ 70 #define IPMI_MAX_ADDR_SIZE 32 71 struct ipmi_addr { 72 /* Try to take these from the "Channel Medium Type" table 73 in section 6.5 of the IPMI 1.5 manual. */ 74 int addr_type; 75 short channel; 76 char data[IPMI_MAX_ADDR_SIZE]; 77 }; 78 79 /* 80 * When the address is not used, the type will be set to this value. 81 * The channel is the BMC's channel number for the channel (usually 82 * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC. 83 */ 84 #define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c 85 struct ipmi_system_interface_addr { 86 int addr_type; 87 short channel; 88 unsigned char lun; 89 }; 90 91 /* An IPMB Address. */ 92 #define IPMI_IPMB_ADDR_TYPE 0x01 93 /* Used for broadcast get device id as described in section 17.9 of the 94 IPMI 1.5 manual. */ 95 #define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41 96 struct ipmi_ipmb_addr { 97 int addr_type; 98 short channel; 99 unsigned char slave_addr; 100 unsigned char lun; 101 }; 102 103 /* 104 * A LAN Address. This is an address to/from a LAN interface bridged 105 * by the BMC, not an address actually out on the LAN. 106 * 107 * A conscious decision was made here to deviate slightly from the IPMI 108 * spec. We do not use rqSWID and rsSWID like it shows in the 109 * message. Instead, we use remote_SWID and local_SWID. This means 110 * that any message (a request or response) from another device will 111 * always have exactly the same address. If you didn't do this, 112 * requests and responses from the same device would have different 113 * addresses, and that's not too cool. 114 * 115 * In this address, the remote_SWID is always the SWID the remote 116 * message came from, or the SWID we are sending the message to. 117 * local_SWID is always our SWID. Note that having our SWID in the 118 * message is a little weird, but this is required. 119 */ 120 #define IPMI_LAN_ADDR_TYPE 0x04 121 struct ipmi_lan_addr { 122 int addr_type; 123 short channel; 124 unsigned char privilege; 125 unsigned char session_handle; 126 unsigned char remote_SWID; 127 unsigned char local_SWID; 128 unsigned char lun; 129 }; 130 131 132 /* 133 * Channel for talking directly with the BMC. When using this 134 * channel, This is for the system interface address type only. FIXME 135 * - is this right, or should we use -1? 136 */ 137 #define IPMI_BMC_CHANNEL 0xf 138 #define IPMI_NUM_CHANNELS 0x10 139 140 /* 141 * Used to signify an "all channel" bitmask. This is more than the 142 * actual number of channels because this is used in userland and 143 * will cover us if the number of channels is extended. 144 */ 145 #define IPMI_CHAN_ALL (~0) 146 147 148 /* 149 * A raw IPMI message without any addressing. This covers both 150 * commands and responses. The completion code is always the first 151 * byte of data in the response (as the spec shows the messages laid 152 * out). 153 */ 154 struct ipmi_msg { 155 unsigned char netfn; 156 unsigned char cmd; 157 unsigned short data_len; 158 unsigned char __user *data; 159 }; 160 161 struct kernel_ipmi_msg { 162 unsigned char netfn; 163 unsigned char cmd; 164 unsigned short data_len; 165 unsigned char *data; 166 }; 167 168 /* 169 * Various defines that are useful for IPMI applications. 170 */ 171 #define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1 172 #define IPMI_TIMEOUT_COMPLETION_CODE 0xC3 173 #define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff 174 175 176 /* 177 * Receive types for messages coming from the receive interface. This 178 * is used for the receive in-kernel interface and in the receive 179 * IOCTL. 180 * 181 * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but 182 * it allows you to get the message results when you send a response 183 * message. 184 */ 185 #define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */ 186 #define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */ 187 #define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */ 188 #define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for 189 a sent response, giving any 190 error status for sending the 191 response. When you send a 192 response message, this will 193 be returned. */ 194 #define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ 195 196 /* Note that async events and received commands do not have a completion 197 code as the first byte of the incoming data, unlike a response. */ 198 199 200 /* 201 * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO 202 * setting is the default and means it will be set on certain 203 * commands. Hard setting it on and off will override automatic 204 * operation. 205 */ 206 #define IPMI_MAINTENANCE_MODE_AUTO 0 207 #define IPMI_MAINTENANCE_MODE_OFF 1 208 #define IPMI_MAINTENANCE_MODE_ON 2 209 210 211 212 /* 213 * The userland interface 214 */ 215 216 /* 217 * The userland interface for the IPMI driver is a standard character 218 * device, with each instance of an interface registered as a minor 219 * number under the major character device. 220 * 221 * The read and write calls do not work, to get messages in and out 222 * requires ioctl calls because of the complexity of the data. select 223 * and poll do work, so you can wait for input using the file 224 * descriptor, you just can use read to get it. 225 * 226 * In general, you send a command down to the interface and receive 227 * responses back. You can use the msgid value to correlate commands 228 * and responses, the driver will take care of figuring out which 229 * incoming messages are for which command and find the proper msgid 230 * value to report. You will only receive reponses for commands you 231 * send. Asynchronous events, however, go to all open users, so you 232 * must be ready to handle these (or ignore them if you don't care). 233 * 234 * The address type depends upon the channel type. When talking 235 * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored 236 * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must 237 * supply a valid IPMB address with the addr_type set properly. 238 * 239 * When talking to normal channels, the driver takes care of the 240 * details of formatting and sending messages on that channel. You do 241 * not, for instance, have to format a send command, you just send 242 * whatever command you want to the channel, the driver will create 243 * the send command, automatically issue receive command and get even 244 * commands, and pass those up to the proper user. 245 */ 246 247 248 /* The magic IOCTL value for this interface. */ 249 #define IPMI_IOC_MAGIC 'i' 250 251 252 /* Messages sent to the interface are this format. */ 253 struct ipmi_req { 254 unsigned char __user *addr; /* Address to send the message to. */ 255 unsigned int addr_len; 256 257 long msgid; /* The sequence number for the message. This 258 exact value will be reported back in the 259 response to this request if it is a command. 260 If it is a response, this will be used as 261 the sequence value for the response. */ 262 263 struct ipmi_msg msg; 264 }; 265 /* 266 * Send a message to the interfaces. error values are: 267 * - EFAULT - an address supplied was invalid. 268 * - EINVAL - The address supplied was not valid, or the command 269 * was not allowed. 270 * - EMSGSIZE - The message to was too large. 271 * - ENOMEM - Buffers could not be allocated for the command. 272 */ 273 #define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \ 274 struct ipmi_req) 275 276 /* Messages sent to the interface with timing parameters are this 277 format. */ 278 struct ipmi_req_settime { 279 struct ipmi_req req; 280 281 /* See ipmi_request_settime() above for details on these 282 values. */ 283 int retries; 284 unsigned int retry_time_ms; 285 }; 286 /* 287 * Send a message to the interfaces with timing parameters. error values 288 * are: 289 * - EFAULT - an address supplied was invalid. 290 * - EINVAL - The address supplied was not valid, or the command 291 * was not allowed. 292 * - EMSGSIZE - The message to was too large. 293 * - ENOMEM - Buffers could not be allocated for the command. 294 */ 295 #define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \ 296 struct ipmi_req_settime) 297 298 /* Messages received from the interface are this format. */ 299 struct ipmi_recv { 300 int recv_type; /* Is this a command, response or an 301 asyncronous event. */ 302 303 unsigned char __user *addr; /* Address the message was from is put 304 here. The caller must supply the 305 memory. */ 306 unsigned int addr_len; /* The size of the address buffer. 307 The caller supplies the full buffer 308 length, this value is updated to 309 the actual message length when the 310 message is received. */ 311 312 long msgid; /* The sequence number specified in the request 313 if this is a response. If this is a command, 314 this will be the sequence number from the 315 command. */ 316 317 struct ipmi_msg msg; /* The data field must point to a buffer. 318 The data_size field must be set to the 319 size of the message buffer. The 320 caller supplies the full buffer 321 length, this value is updated to the 322 actual message length when the message 323 is received. */ 324 }; 325 326 /* 327 * Receive a message. error values: 328 * - EAGAIN - no messages in the queue. 329 * - EFAULT - an address supplied was invalid. 330 * - EINVAL - The address supplied was not valid. 331 * - EMSGSIZE - The message to was too large to fit into the message buffer, 332 * the message will be left in the buffer. */ 333 #define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \ 334 struct ipmi_recv) 335 336 /* 337 * Like RECEIVE_MSG, but if the message won't fit in the buffer, it 338 * will truncate the contents instead of leaving the data in the 339 * buffer. 340 */ 341 #define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \ 342 struct ipmi_recv) 343 344 /* Register to get commands from other entities on this interface. */ 345 struct ipmi_cmdspec { 346 unsigned char netfn; 347 unsigned char cmd; 348 }; 349 350 /* 351 * Register to receive a specific command. error values: 352 * - EFAULT - an address supplied was invalid. 353 * - EBUSY - The netfn/cmd supplied was already in use. 354 * - ENOMEM - could not allocate memory for the entry. 355 */ 356 #define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \ 357 struct ipmi_cmdspec) 358 /* 359 * Unregister a registered command. error values: 360 * - EFAULT - an address supplied was invalid. 361 * - ENOENT - The netfn/cmd was not found registered for this user. 362 */ 363 #define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \ 364 struct ipmi_cmdspec) 365 366 /* 367 * Register to get commands from other entities on specific channels. 368 * This way, you can only listen on specific channels, or have messages 369 * from some channels go to one place and other channels to someplace 370 * else. The chans field is a bitmask, (1 << channel) for each channel. 371 * It may be IPMI_CHAN_ALL for all channels. 372 */ 373 struct ipmi_cmdspec_chans { 374 unsigned int netfn; 375 unsigned int cmd; 376 unsigned int chans; 377 }; 378 379 /* 380 * Register to receive a specific command on specific channels. error values: 381 * - EFAULT - an address supplied was invalid. 382 * - EBUSY - One of the netfn/cmd/chans supplied was already in use. 383 * - ENOMEM - could not allocate memory for the entry. 384 */ 385 #define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \ 386 struct ipmi_cmdspec_chans) 387 /* 388 * Unregister some netfn/cmd/chans. error values: 389 * - EFAULT - an address supplied was invalid. 390 * - ENOENT - None of the netfn/cmd/chans were found registered for this user. 391 */ 392 #define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \ 393 struct ipmi_cmdspec_chans) 394 395 /* 396 * Set whether this interface receives events. Note that the first 397 * user registered for events will get all pending events for the 398 * interface. error values: 399 * - EFAULT - an address supplied was invalid. 400 */ 401 #define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int) 402 403 /* 404 * Set and get the slave address and LUN that we will use for our 405 * source messages. Note that this affects the interface, not just 406 * this user, so it will affect all users of this interface. This is 407 * so some initialization code can come in and do the OEM-specific 408 * things it takes to determine your address (if not the BMC) and set 409 * it for everyone else. You should probably leave the LUN alone. 410 */ 411 struct ipmi_channel_lun_address_set { 412 unsigned short channel; 413 unsigned char value; 414 }; 415 #define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \ 416 _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set) 417 #define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \ 418 _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set) 419 #define IPMICTL_SET_MY_CHANNEL_LUN_CMD \ 420 _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set) 421 #define IPMICTL_GET_MY_CHANNEL_LUN_CMD \ 422 _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set) 423 /* Legacy interfaces, these only set IPMB 0. */ 424 #define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int) 425 #define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) 426 #define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) 427 #define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int) 428 429 /* 430 * Get/set the default timing values for an interface. You shouldn't 431 * generally mess with these. 432 */ 433 struct ipmi_timing_parms { 434 int retries; 435 unsigned int retry_time_ms; 436 }; 437 #define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \ 438 struct ipmi_timing_parms) 439 #define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \ 440 struct ipmi_timing_parms) 441 442 /* 443 * Set the maintenance mode. See ipmi_set_maintenance_mode() above 444 * for a description of what this does. 445 */ 446 #define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int) 447 #define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int) 448 449 #endif /* _UAPI__LINUX_IPMI_H */ 450
