1 /* src/config.h.in. Generated from configure.ac by autoheader. */ 2 3 4 /* PCRE2 is written in Standard C, but there are a few non-standard things it 5 can cope with, allowing it to run on SunOS4 and other "close to standard" 6 systems. 7 8 In environments that support the GNU autotools, config.h.in is converted into 9 config.h by the "configure" script. In environments that use CMake, 10 config-cmake.in is converted into config.h. If you are going to build PCRE2 "by 11 hand" without using "configure" or CMake, you should copy the distributed 12 config.h.generic to config.h, and edit the macro definitions to be the way you 13 need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, 14 so that config.h is included at the start of every source. 15 16 Alternatively, you can avoid editing by using -D on the compiler command line 17 to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, 18 but if you do, default values will be taken from config.h for non-boolean 19 macros that are not defined on the command line. 20 21 Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be defined 22 (conventionally to 1) for TRUE, and not defined at all for FALSE. All such 23 macros are listed as a commented #undef in config.h.generic. Macros such as 24 MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are 25 surrounded by #ifndef/#endif lines so that the value can be overridden by -D. 26 27 PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if 28 HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make 29 sure both macros are undefined; an emulation function will then be used. */ 30 31 /* By default, the \R escape sequence matches any Unicode line ending 32 character or sequence of characters. If BSR_ANYCRLF is defined (to any 33 value), this is changed so that backslash-R matches only CR, LF, or CRLF. 34 The build-time default can be overridden by the user of PCRE2 at runtime. 35 */ 36 #undef BSR_ANYCRLF 37 38 /* If you are compiling for a system that uses EBCDIC instead of ASCII 39 character codes, define this macro to any value. When EBCDIC is set, PCRE2 40 assumes that all input strings are in EBCDIC. If you do not define this 41 macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It 42 is not possible to build a version of PCRE2 that supports both EBCDIC and 43 UTF-8/16/32. */ 44 #undef EBCDIC 45 46 /* In an EBCDIC environment, define this macro to any value to arrange for the 47 NL character to be 0x25 instead of the default 0x15. NL plays the role that 48 LF does in an ASCII/Unicode environment. */ 49 #undef EBCDIC_NL25 50 51 /* Define to 1 if you have the `bcopy' function. */ 52 #undef HAVE_BCOPY 53 54 /* Define to 1 if you have the <bzlib.h> header file. */ 55 #undef HAVE_BZLIB_H 56 57 /* Define to 1 if you have the <dirent.h> header file. */ 58 #undef HAVE_DIRENT_H 59 60 /* Define to 1 if you have the <dlfcn.h> header file. */ 61 #undef HAVE_DLFCN_H 62 63 /* Define to 1 if you have the <editline/readline.h> header file. */ 64 #undef HAVE_EDITLINE_READLINE_H 65 66 /* Define to 1 if you have the <edit/readline/readline.h> header file. */ 67 #undef HAVE_EDIT_READLINE_READLINE_H 68 69 /* Define to 1 if you have the <inttypes.h> header file. */ 70 #undef HAVE_INTTYPES_H 71 72 /* Define to 1 if you have the <limits.h> header file. */ 73 #undef HAVE_LIMITS_H 74 75 /* Define to 1 if you have the `memmove' function. */ 76 #undef HAVE_MEMMOVE 77 78 /* Define to 1 if you have the <memory.h> header file. */ 79 #undef HAVE_MEMORY_H 80 81 /* Define if you have POSIX threads libraries and header files. */ 82 #undef HAVE_PTHREAD 83 84 /* Have PTHREAD_PRIO_INHERIT. */ 85 #undef HAVE_PTHREAD_PRIO_INHERIT 86 87 /* Define to 1 if you have the <readline/history.h> header file. */ 88 #undef HAVE_READLINE_HISTORY_H 89 90 /* Define to 1 if you have the <readline/readline.h> header file. */ 91 #undef HAVE_READLINE_READLINE_H 92 93 /* Define to 1 if you have the <stdint.h> header file. */ 94 #undef HAVE_STDINT_H 95 96 /* Define to 1 if you have the <stdlib.h> header file. */ 97 #undef HAVE_STDLIB_H 98 99 /* Define to 1 if you have the `strerror' function. */ 100 #undef HAVE_STRERROR 101 102 /* Define to 1 if you have the <strings.h> header file. */ 103 #undef HAVE_STRINGS_H 104 105 /* Define to 1 if you have the <string.h> header file. */ 106 #undef HAVE_STRING_H 107 108 /* Define to 1 if you have the <sys/stat.h> header file. */ 109 #undef HAVE_SYS_STAT_H 110 111 /* Define to 1 if you have the <sys/types.h> header file. */ 112 #undef HAVE_SYS_TYPES_H 113 114 /* Define to 1 if you have the <sys/wait.h> header file. */ 115 #undef HAVE_SYS_WAIT_H 116 117 /* Define to 1 if you have the <unistd.h> header file. */ 118 #undef HAVE_UNISTD_H 119 120 /* Define to 1 if the compiler supports simple visibility declarations. */ 121 #undef HAVE_VISIBILITY 122 123 /* Define to 1 if you have the <windows.h> header file. */ 124 #undef HAVE_WINDOWS_H 125 126 /* Define to 1 if you have the <zlib.h> header file. */ 127 #undef HAVE_ZLIB_H 128 129 /* PCRE2 uses recursive function calls to handle backtracking while matching. 130 This can sometimes be a problem on systems that have stacks of limited 131 size. Define HEAP_MATCH_RECURSE to any value to get a version that doesn't 132 use recursion in the match() function; instead it creates its own stack by 133 steam using memory from the heap. For more detail, see the comments and 134 other stuff just above the match() function. */ 135 #undef HEAP_MATCH_RECURSE 136 137 /* The value of LINK_SIZE determines the number of bytes used to store links 138 as offsets within the compiled regex. The default is 2, which allows for 139 compiled patterns up to 64K long. This covers the vast majority of cases. 140 However, PCRE2 can also be compiled to use 3 or 4 bytes instead. This 141 allows for longer patterns in extreme cases. */ 142 #undef LINK_SIZE 143 144 /* Define to the sub-directory where libtool stores uninstalled libraries. */ 145 #undef LT_OBJDIR 146 147 /* The value of MATCH_LIMIT determines the default number of times the 148 internal match() function can be called during a single execution of 149 pcre2_match(). There is a runtime interface for setting a different limit. 150 The limit exists in order to catch runaway regular expressions that take 151 for ever to determine that they do not match. The default is set very large 152 so that it does not accidentally catch legitimate cases. */ 153 #undef MATCH_LIMIT 154 155 /* The above limit applies to all calls of match(), whether or not they 156 increase the recursion depth. In some environments it is desirable to limit 157 the depth of recursive calls of match() more strictly, in order to restrict 158 the maximum amount of stack (or heap, if HEAP_MATCH_RECURSE is defined) 159 that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive 160 calls of match(). To have any useful effect, it must be less than the value 161 of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There 162 is a runtime method for setting a different limit. */ 163 #undef MATCH_LIMIT_RECURSION 164 165 /* This limit is parameterized just in case anybody ever wants to change it. 166 Care must be taken if it is increased, because it guards against integer 167 overflow caused by enormously large patterns. */ 168 #undef MAX_NAME_COUNT 169 170 /* This limit is parameterized just in case anybody ever wants to change it. 171 Care must be taken if it is increased, because it guards against integer 172 overflow caused by enormously large patterns. */ 173 #undef MAX_NAME_SIZE 174 175 /* Defining NEVER_BACKSLASH_C locks out the use of \C in all patterns. */ 176 #undef NEVER_BACKSLASH_C 177 178 /* The value of NEWLINE_DEFAULT determines the default newline character 179 sequence. PCRE2 client programs can override this by selecting other values 180 at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5 181 (ANYCRLF). */ 182 #undef NEWLINE_DEFAULT 183 184 /* Name of package */ 185 #undef PACKAGE 186 187 /* Define to the address where bug reports for this package should be sent. */ 188 #undef PACKAGE_BUGREPORT 189 190 /* Define to the full name of this package. */ 191 #undef PACKAGE_NAME 192 193 /* Define to the full name and version of this package. */ 194 #undef PACKAGE_STRING 195 196 /* Define to the one symbol short name of this package. */ 197 #undef PACKAGE_TARNAME 198 199 /* Define to the home page for this package. */ 200 #undef PACKAGE_URL 201 202 /* Define to the version of this package. */ 203 #undef PACKAGE_VERSION 204 205 /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested 206 parentheses (of any kind) in a pattern. This limits the amount of system 207 stack that is used while compiling a pattern. */ 208 #undef PARENS_NEST_LIMIT 209 210 /* The value of PCRE2GREP_BUFSIZE determines the size of buffer used by 211 pcre2grep to hold parts of the file it is searching. This is also the 212 minimum value. The actual amount of memory used by pcre2grep is three times 213 this number, because it allows for the buffering of "before" and "after" 214 lines. */ 215 #undef PCRE2GREP_BUFSIZE 216 217 /* to make a symbol visible */ 218 #undef PCRE2POSIX_EXP_DECL 219 220 /* to make a symbol visible */ 221 #undef PCRE2POSIX_EXP_DEFN 222 223 /* Define to any value to include debugging code. */ 224 #undef PCRE2_DEBUG 225 226 /* to make a symbol visible */ 227 #undef PCRE2_EXP_DECL 228 229 230 /* If you are compiling for a system other than a Unix-like system or 231 Win32, and it needs some magic to be inserted before the definition 232 of a function that is exported by the library, define this macro to 233 contain the relevant magic. If you do not define this macro, a suitable 234 __declspec value is used for Windows systems; in other environments 235 "extern" is used for a C compiler and "extern C" for a C++ compiler. 236 This macro apears at the start of every exported function that is part 237 of the external API. It does not appear on functions that are "external" 238 in the C sense, but which are internal to the library. */ 239 #undef PCRE2_EXP_DEFN 240 241 /* Define to any value if linking statically (TODO: make nice with Libtool) */ 242 #undef PCRE2_STATIC 243 244 /* Define to necessary symbol if this constant uses a non-standard name on 245 your system. */ 246 #undef PTHREAD_CREATE_JOINABLE 247 248 /* Define to 1 if you have the ANSI C header files. */ 249 #undef STDC_HEADERS 250 251 /* Define to any value to enable support for Just-In-Time compiling. */ 252 #undef SUPPORT_JIT 253 254 /* Define to any value to allow pcre2grep to be linked with libbz2, so that it 255 is able to handle .bz2 files. */ 256 #undef SUPPORT_LIBBZ2 257 258 /* Define to any value to allow pcre2test to be linked with libedit. */ 259 #undef SUPPORT_LIBEDIT 260 261 /* Define to any value to allow pcre2test to be linked with libreadline. */ 262 #undef SUPPORT_LIBREADLINE 263 264 /* Define to any value to allow pcre2grep to be linked with libz, so that it 265 is able to handle .gz files. */ 266 #undef SUPPORT_LIBZ 267 268 /* Define to any value to enable callout script support in pcre2grep. */ 269 #undef SUPPORT_PCRE2GREP_CALLOUT 270 271 /* Define to any value to enable JIT support in pcre2grep. */ 272 #undef SUPPORT_PCRE2GREP_JIT 273 274 /* Define to any value to enable the 16 bit PCRE2 library. */ 275 #undef SUPPORT_PCRE2_16 276 277 /* Define to any value to enable the 32 bit PCRE2 library. */ 278 #undef SUPPORT_PCRE2_32 279 280 /* Define to any value to enable the 8 bit PCRE2 library. */ 281 #undef SUPPORT_PCRE2_8 282 283 /* Define to any value to enable support for Unicode and UTF encoding. This 284 will work even in an EBCDIC environment, but it is incompatible with the 285 EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or* 286 ASCII/Unicode, but not both at once. */ 287 #undef SUPPORT_UNICODE 288 289 /* Define to any value for valgrind support to find invalid memory reads. */ 290 #undef SUPPORT_VALGRIND 291 292 /* Version number of package */ 293 #undef VERSION 294 295 /* Define to empty if `const' does not conform to ANSI C. */ 296 #undef const 297 298 /* Define to the type of a signed integer type of width exactly 64 bits if 299 such a type exists and the standard includes do not define it. */ 300 #undef int64_t 301 302 /* Define to `unsigned int' if <sys/types.h> does not define. */ 303 #undef size_t 304
