1 /* 2 * Copyright 2012 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 /****************************************************************************** 18 * 19 * Filename: hardware.c 20 * 21 * Description: Contains controller-specific functions, like 22 * firmware patch download 23 * low power mode operations 24 * 25 ******************************************************************************/ 26 27 #define LOG_TAG "bt_vendor" 28 29 #include <sys/types.h> 30 #include <sys/stat.h> 31 #include <signal.h> 32 #include <time.h> 33 #include <errno.h> 34 #include <fcntl.h> 35 #include <dirent.h> 36 #include <ctype.h> 37 #include <cutils/properties.h> 38 #include <log/log.h> 39 #include <stdlib.h> 40 #include <string.h> 41 #include <unistd.h> 42 #include "bt_hci_bdroid.h" 43 #include "bt_vendor_qcom.h" 44 #include <string.h> 45 #define MAX_CNT_RETRY 100 46 47 int hw_config(int nState) 48 { 49 char *szState[] = {"true", "false"}; 50 char *szReqSt = NULL; 51 char szBtSocStatus[PROPERTY_VALUE_MAX] = {'\0', }; 52 53 if(nState == BT_VND_PWR_OFF) 54 szReqSt = szState[1]; 55 else 56 szReqSt = szState[0]; 57 58 if((property_get("bluetooth.status", szBtSocStatus, "") <= 0)) 59 { 60 if(nState == BT_VND_PWR_ON ) { 61 ALOGW("Hw_config: First Time BT on after boot.Starting hciattach daemon BTStatus=%s",szBtSocStatus); 62 if (property_set("bluetooth.hciattach", szReqSt) < 0) 63 { 64 ALOGE("Hw_config: Property Setting fail"); 65 return -1; 66 } 67 } 68 } else if( !(strncmp(szBtSocStatus, "on", strlen("on")))) { 69 //BTSOC is already on 70 ALOGW("Hw_config: nState = %d", nState); 71 } else { 72 ALOGW("Hw_config: trigerring hciattach"); 73 if (property_set("bluetooth.hciattach", szReqSt) < 0) 74 { 75 ALOGE("Hw_config: Property Setting fail"); 76 return -1; 77 } 78 } 79 80 return 0; 81 } 82 83 int readTrpState() 84 { 85 char szBtStatus[PROPERTY_VALUE_MAX] = {0, }; 86 if(property_get("bluetooth.status", szBtStatus, "") < 0){ 87 ALOGE("Fail to get bluetooth status"); 88 return FALSE; 89 } 90 91 if(!strncmp(szBtStatus, "on", strlen("on"))){ 92 ALOGI("bluetooth status is on"); 93 return TRUE; 94 } 95 return FALSE; 96 } 97 98 int is_hw_ready() 99 { 100 int i=0; 101 char szStatus[10] = {0,}; 102 103 for(i=MAX_CNT_RETRY; i>0; i--){ 104 //TODO :: checking routine 105 if(readTrpState()==TRUE){ 106 break; 107 } 108 usleep(50*1000); 109 } 110 return (i==0)? FALSE:TRUE; 111 } 112 113 #if (HW_NEED_END_WITH_HCI_RESET == TRUE) 114 /******************************************************************************* 115 ** 116 ** Function hw_epilog_cback 117 ** 118 ** Description Callback function for Command Complete Events from HCI 119 ** commands sent in epilog process. 120 ** 121 ** Returns None 122 ** 123 *******************************************************************************/ 124 void hw_epilog_cback(void *p_mem) 125 { 126 HC_BT_HDR *p_evt_buf = (HC_BT_HDR *) p_mem; 127 char *p_name, *p_tmp; 128 uint8_t *p, status; 129 uint16_t opcode; 130 131 status = *((uint8_t *)(p_evt_buf + 1) + HCI_EVT_CMD_CMPL_STATUS_RET_BYTE); 132 p = (uint8_t *)(p_evt_buf + 1) + HCI_EVT_CMD_CMPL_OPCODE; 133 STREAM_TO_UINT16(opcode,p); 134 135 ALOGI("%s Opcode:0x%04X Status: %d", __FUNCTION__, opcode, status); 136 137 if (bt_vendor_cbacks) 138 { 139 /* Must free the RX event buffer */ 140 bt_vendor_cbacks->dealloc(p_evt_buf); 141 142 /* Once epilog process is done, must call callback to notify caller */ 143 bt_vendor_cbacks->epilog_cb(BT_VND_OP_RESULT_SUCCESS); 144 } 145 } 146 147 /******************************************************************************* 148 ** 149 ** Function hw_epilog_process 150 ** 151 ** Description Sample implementation of epilog process 152 ** 153 ** Returns None 154 ** 155 *******************************************************************************/ 156 void hw_epilog_process(void) 157 { 158 HC_BT_HDR *p_buf = NULL; 159 uint8_t *p; 160 161 ALOGI("hw_epilog_process"); 162 163 /* Sending a HCI_RESET */ 164 if (bt_vendor_cbacks) 165 { 166 /* Must allocate command buffer via HC's alloc API */ 167 p_buf = (HC_BT_HDR *) bt_vendor_cbacks->alloc(BT_HC_HDR_SIZE + \ 168 HCI_CMD_PREAMBLE_SIZE); 169 } 170 171 if (p_buf) 172 { 173 p_buf->event = MSG_STACK_TO_HC_HCI_CMD; 174 p_buf->offset = 0; 175 p_buf->layer_specific = 0; 176 p_buf->len = HCI_CMD_PREAMBLE_SIZE; 177 178 p = (uint8_t *) (p_buf + 1); 179 UINT16_TO_STREAM(p, HCI_RESET); 180 *p = 0; /* parameter length */ 181 182 /* Send command via HC's xmit_cb API */ 183 bt_vendor_cbacks->xmit_cb(HCI_RESET, p_buf, hw_epilog_cback); 184 } 185 else 186 { 187 if (bt_vendor_cbacks) 188 { 189 ALOGE("vendor lib epilog process aborted [no buffer]"); 190 bt_vendor_cbacks->epilog_cb(BT_VND_OP_RESULT_FAIL); 191 } 192 } 193 } 194 #endif // (HW_NEED_END_WITH_HCI_RESET == TRUE) 195