1 #!/bin/sh 2 # 3 # install - install a program, script, or datafile 4 # 5 # This originates from X11R5 (mit/util/scripts/install.sh), which was 6 # later released in X11R6 (xc/config/util/install.sh) with the 7 # following copyright and license. 8 # 9 # Copyright (C) 1994 X Consortium 10 # 11 # Permission is hereby granted, free of charge, to any person obtaining a copy 12 # of this software and associated documentation files (the "Software"), to 13 # deal in the Software without restriction, including without limitation the 14 # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or 15 # sell copies of the Software, and to permit persons to whom the Software is 16 # furnished to do so, subject to the following conditions: 17 # 18 # The above copyright notice and this permission notice shall be included in 19 # all copies or substantial portions of the Software. 20 # 21 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 22 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 23 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 24 # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN 25 # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- 26 # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 27 # 28 # Except as contained in this notice, the name of the X Consortium shall not 29 # be used in advertising or otherwise to promote the sale, use or other deal- 30 # ings in this Software without prior written authorization from the X Consor- 31 # tium. 32 # 33 # 34 # FSF changes to this file are in the public domain. 35 # 36 # Calling this script install-sh is preferred over install.sh, to prevent 37 # `make' implicit rules from creating a file called install from it 38 # when there is no Makefile. 39 # 40 # This script is compatible with the BSD install script, but was written 41 # from scratch. It can only install one file at a time, a restriction 42 # shared with many OS's install programs. 43 44 45 # set DOITPROG to echo to test this script 46 47 # Don't use :- since 4.3BSD and earlier shells don't like it. 48 doit="${DOITPROG-}" 49 50 51 # put in absolute paths if you don't have them in your path; or use env. vars. 52 53 mvprog="${MVPROG-mv}" 54 cpprog="${CPPROG-cp}" 55 chmodprog="${CHMODPROG-chmod}" 56 chownprog="${CHOWNPROG-chown}" 57 chgrpprog="${CHGRPPROG-chgrp}" 58 stripprog="${STRIPPROG-strip}" 59 rmprog="${RMPROG-rm}" 60 mkdirprog="${MKDIRPROG-mkdir}" 61 62 transformbasename="" 63 transform_arg="" 64 instcmd="$mvprog" 65 chmodcmd="$chmodprog 0755" 66 chowncmd="" 67 chgrpcmd="" 68 stripcmd="" 69 rmcmd="$rmprog -f" 70 mvcmd="$mvprog" 71 src="" 72 dst="" 73 dir_arg="" 74 75 while [ x"$1" != x ]; do 76 case $1 in 77 -c) instcmd=$cpprog 78 shift 79 continue;; 80 81 -d) dir_arg=true 82 shift 83 continue;; 84 85 -m) chmodcmd="$chmodprog $2" 86 shift 87 shift 88 continue;; 89 90 -o) chowncmd="$chownprog $2" 91 shift 92 shift 93 continue;; 94 95 -g) chgrpcmd="$chgrpprog $2" 96 shift 97 shift 98 continue;; 99 100 -s) stripcmd=$stripprog 101 shift 102 continue;; 103 104 -t=*) transformarg=`echo $1 | sed 's/-t=//'` 105 shift 106 continue;; 107 108 -b=*) transformbasename=`echo $1 | sed 's/-b=//'` 109 shift 110 continue;; 111 112 *) if [ x"$src" = x ] 113 then 114 src=$1 115 else 116 # this colon is to work around a 386BSD /bin/sh bug 117 : 118 dst=$1 119 fi 120 shift 121 continue;; 122 esac 123 done 124 125 if [ x"$src" = x ] 126 then 127 echo "$0: no input file specified" >&2 128 exit 1 129 else 130 : 131 fi 132 133 if [ x"$dir_arg" != x ]; then 134 dst=$src 135 src="" 136 137 if [ -d "$dst" ]; then 138 instcmd=: 139 chmodcmd="" 140 else 141 instcmd=$mkdirprog 142 fi 143 else 144 145 # Waiting for this to be detected by the "$instcmd $src $dsttmp" command 146 # might cause directories to be created, which would be especially bad 147 # if $src (and thus $dsttmp) contains '*'. 148 149 if [ -f "$src" ] || [ -d "$src" ] 150 then 151 : 152 else 153 echo "$0: $src does not exist" >&2 154 exit 1 155 fi 156 157 if [ x"$dst" = x ] 158 then 159 echo "$0: no destination specified" >&2 160 exit 1 161 else 162 : 163 fi 164 165 # If destination is a directory, append the input filename; if your system 166 # does not like double slashes in filenames, you may need to add some logic 167 168 if [ -d "$dst" ] 169 then 170 dst=$dst/`basename "$src"` 171 else 172 : 173 fi 174 fi 175 176 ## this sed command emulates the dirname command 177 dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` 178 179 # Make sure that the destination directory exists. 180 # this part is taken from Noah Friedman's mkinstalldirs script 181 182 # Skip lots of stat calls in the usual case. 183 if [ ! -d "$dstdir" ]; then 184 defaultIFS=' 185 ' 186 IFS="${IFS-$defaultIFS}" 187 188 oIFS=$IFS 189 # Some sh's can't handle IFS=/ for some reason. 190 IFS='%' 191 set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` 192 IFS=$oIFS 193 194 pathcomp='' 195 196 while [ $# -ne 0 ] ; do 197 pathcomp=$pathcomp$1 198 shift 199 200 if [ ! -d "$pathcomp" ] ; 201 then 202 $mkdirprog "$pathcomp" 203 else 204 : 205 fi 206 207 pathcomp=$pathcomp/ 208 done 209 fi 210 211 if [ x"$dir_arg" != x ] 212 then 213 $doit $instcmd "$dst" && 214 215 if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && 216 if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && 217 if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && 218 if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi 219 else 220 221 # If we're going to rename the final executable, determine the name now. 222 223 if [ x"$transformarg" = x ] 224 then 225 dstfile=`basename "$dst"` 226 else 227 dstfile=`basename "$dst" $transformbasename | 228 sed $transformarg`$transformbasename 229 fi 230 231 # don't allow the sed command to completely eliminate the filename 232 233 if [ x"$dstfile" = x ] 234 then 235 dstfile=`basename "$dst"` 236 else 237 : 238 fi 239 240 # Make a couple of temp file names in the proper directory. 241 242 dsttmp=$dstdir/#inst.$$# 243 rmtmp=$dstdir/#rm.$$# 244 245 # Trap to clean up temp files at exit. 246 247 trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 248 trap '(exit $?); exit' 1 2 13 15 249 250 # Move or copy the file name to the temp name 251 252 $doit $instcmd "$src" "$dsttmp" && 253 254 # and set any options; do chmod last to preserve setuid bits 255 256 # If any of these fail, we abort the whole thing. If we want to 257 # ignore errors from any of these, just make sure not to ignore 258 # errors from the above "$doit $instcmd $src $dsttmp" command. 259 260 if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && 261 if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && 262 if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && 263 if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && 264 265 # Now remove or move aside any old file at destination location. We try this 266 # two ways since rm can't unlink itself on some systems and the destination 267 # file might be busy for other reasons. In this case, the final cleanup 268 # might fail but the new file should still install successfully. 269 270 { 271 if [ -f "$dstdir/$dstfile" ] 272 then 273 $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || 274 $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || 275 { 276 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 277 (exit 1); exit 278 } 279 else 280 : 281 fi 282 } && 283 284 # Now rename the file to the real destination. 285 286 $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" 287 288 fi && 289 290 # The final little trick to "correctly" pass the exit status to the exit trap. 291 292 { 293 (exit 0); exit 294 } 295
