1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) Freescale Semiconductor, Inc. 2006. 4 */ 5 6 #include <common.h> 7 #include <ioports.h> 8 #include <mpc83xx.h> 9 #include <i2c.h> 10 #include <miiphy.h> 11 #include <vsc7385.h> 12 #ifdef CONFIG_PCI 13 #include <asm/mpc8349_pci.h> 14 #include <pci.h> 15 #endif 16 #include <spd_sdram.h> 17 #include <asm/mmu.h> 18 #if defined(CONFIG_OF_LIBFDT) 19 #include <linux/libfdt.h> 20 #endif 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 #ifndef CONFIG_SPD_EEPROM 25 /************************************************************************* 26 * fixed sdram init -- doesn't use serial presence detect. 27 ************************************************************************/ 28 int fixed_sdram(void) 29 { 30 volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; 31 /* The size of RAM, in bytes */ 32 u32 ddr_size = CONFIG_SYS_DDR_SIZE << 20; 33 u32 ddr_size_log2 = __ilog2(ddr_size); 34 35 im->sysconf.ddrlaw[0].ar = 36 LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); 37 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; 38 39 #if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) 40 #warning Chip select bounds is only configurable in 16MB increments 41 #endif 42 im->ddr.csbnds[0].csbnds = 43 ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | 44 (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> 45 CSBNDS_EA_SHIFT) & CSBNDS_EA); 46 im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; 47 48 /* Only one CS for DDR */ 49 im->ddr.cs_config[1] = 0; 50 im->ddr.cs_config[2] = 0; 51 im->ddr.cs_config[3] = 0; 52 53 debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); 54 debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); 55 56 debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); 57 debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); 58 59 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 60 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ 61 im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; 62 im->ddr.sdram_mode = 63 (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); 64 im->ddr.sdram_interval = 65 (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << 66 SDRAM_INTERVAL_BSTOPRE_SHIFT); 67 im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; 68 69 udelay(200); 70 71 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; 72 73 debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); 74 debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); 75 debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); 76 debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); 77 debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); 78 79 return CONFIG_SYS_DDR_SIZE; 80 } 81 #endif 82 83 #ifdef CONFIG_PCI 84 /* 85 * Initialize PCI Devices, report devices found 86 */ 87 #ifndef CONFIG_PCI_PNP 88 static struct pci_config_table pci_mpc83xxmitx_config_table[] = { 89 { 90 PCI_ANY_ID, 91 PCI_ANY_ID, 92 PCI_ANY_ID, 93 PCI_ANY_ID, 94 0x0f, 95 PCI_ANY_ID, 96 pci_cfgfunc_config_device, 97 { 98 PCI_ENET0_IOADDR, 99 PCI_ENET0_MEMADDR, 100 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} 101 }, 102 {} 103 } 104 #endif 105 106 volatile static struct pci_controller hose[] = { 107 { 108 #ifndef CONFIG_PCI_PNP 109 config_table:pci_mpc83xxmitx_config_table, 110 #endif 111 }, 112 { 113 #ifndef CONFIG_PCI_PNP 114 config_table:pci_mpc83xxmitx_config_table, 115 #endif 116 } 117 }; 118 #endif /* CONFIG_PCI */ 119 120 int dram_init(void) 121 { 122 volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; 123 u32 msize = 0; 124 #ifdef CONFIG_DDR_ECC 125 volatile ddr83xx_t *ddr = &im->ddr; 126 #endif 127 128 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) 129 return -ENXIO; 130 131 /* DDR SDRAM - Main SODIMM */ 132 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; 133 #ifdef CONFIG_SPD_EEPROM 134 msize = spd_sdram(); 135 #else 136 msize = fixed_sdram(); 137 #endif 138 139 #ifdef CONFIG_DDR_ECC 140 if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) 141 /* Unlike every other board, on the 83xx spd_sdram() returns 142 megabytes instead of just bytes. That's why we need to 143 multiple by 1MB when calling ddr_enable_ecc(). */ 144 ddr_enable_ecc(msize * 1048576); 145 #endif 146 147 /* return total bus RAM size(bytes) */ 148 gd->ram_size = msize * 1024 * 1024; 149 150 return 0; 151 } 152 153 int checkboard(void) 154 { 155 #ifdef CONFIG_MPC8349ITX 156 puts("Board: Freescale MPC8349E-mITX\n"); 157 #else 158 puts("Board: Freescale MPC8349E-mITX-GP\n"); 159 #endif 160 161 return 0; 162 } 163 164 /* 165 * Implement a work-around for a hardware problem with compact 166 * flash. 167 * 168 * Program the UPM if compact flash is enabled. 169 */ 170 int misc_init_f(void) 171 { 172 #ifdef CONFIG_VSC7385_ENET 173 volatile u32 *vsc7385_cpuctrl; 174 175 /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up 176 default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That 177 means it is 0 when the IRQ is not active. This makes the wire-AND 178 logic always assert IRQ7 to CPU even if there is no request from the 179 switch. Since the compact flash and the switch share the same IRQ, 180 the Linux kernel will think that the compact flash is requesting irq 181 and get stuck when it tries to clear the IRQ. Thus we need to set 182 the L2_IRQ0 and L2_IRQ1 to active low. 183 184 The following code sets the L1_IRQ and L2_IRQ polarity to active low. 185 Without this code, compact flash will not work in Linux because 186 unlike U-Boot, Linux uses the IRQ, so this code is necessary if we 187 don't enable compact flash for U-Boot. 188 */ 189 190 vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0); 191 *vsc7385_cpuctrl |= 0x0c; 192 #endif 193 194 #ifdef CONFIG_COMPACT_FLASH 195 /* UPM Table Configuration Code */ 196 static uint UPMATable[] = { 197 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, 198 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, 199 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 200 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 201 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, 202 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 203 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, 204 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, 205 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 206 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 207 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 208 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 209 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 210 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 211 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 212 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 213 }; 214 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; 215 216 set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); 217 set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); 218 219 /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, 220 GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 221 */ 222 immap->im_lbc.mamr = 0x08404440; 223 224 upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); 225 226 puts("UPMA: Configured for compact flash\n"); 227 #endif 228 229 return 0; 230 } 231 232 /* 233 * Miscellaneous late-boot configurations 234 * 235 * Make sure the EEPROM has the HRCW correctly programmed. 236 * Make sure the RTC is correctly programmed. 237 * 238 * The MPC8349E-mITX can be configured to load the HRCW from 239 * EEPROM instead of flash. This is controlled via jumpers 240 * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all 241 * jumpered), but if they're set to 001 or 010, then the HRCW is 242 * read from the "I2C EEPROM". 243 * 244 * This function makes sure that the I2C EEPROM is programmed 245 * correctly. 246 * 247 * If a VSC7385 microcode image is present, then upload it. 248 */ 249 int misc_init_r(void) 250 { 251 int rc = 0; 252 253 #if defined(CONFIG_SYS_I2C) 254 unsigned int orig_bus = i2c_get_bus_num(); 255 u8 i2c_data; 256 257 #ifdef CONFIG_SYS_I2C_RTC_ADDR 258 u8 ds1339_data[17]; 259 #endif 260 261 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR 262 static u8 eeprom_data[] = /* HRCW data */ 263 { 264 0xAA, 0x55, 0xAA, /* Preamble */ 265 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ 266 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ 267 (CONFIG_SYS_HRCW_LOW >> 24) & 0xFF, 268 (CONFIG_SYS_HRCW_LOW >> 16) & 0xFF, 269 (CONFIG_SYS_HRCW_LOW >> 8) & 0xFF, 270 CONFIG_SYS_HRCW_LOW & 0xFF, 271 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ 272 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ 273 (CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF, 274 (CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF, 275 (CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF, 276 CONFIG_SYS_HRCW_HIGH & 0xFF 277 }; 278 279 u8 data[sizeof(eeprom_data)]; 280 #endif 281 282 printf("Board revision: "); 283 i2c_set_bus_num(1); 284 if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) 285 printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); 286 else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) 287 printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); 288 else { 289 printf("Unknown\n"); 290 rc = 1; 291 } 292 293 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR 294 i2c_set_bus_num(0); 295 296 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { 297 if (memcmp(data, eeprom_data, sizeof(data)) != 0) { 298 if (i2c_write 299 (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data, 300 sizeof(eeprom_data)) != 0) { 301 puts("Failure writing the HRCW to EEPROM via I2C.\n"); 302 rc = 1; 303 } 304 } 305 } else { 306 puts("Failure reading the HRCW from EEPROM via I2C.\n"); 307 rc = 1; 308 } 309 #endif 310 311 #ifdef CONFIG_SYS_I2C_RTC_ADDR 312 i2c_set_bus_num(1); 313 314 if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) 315 == 0) { 316 317 /* Work-around for MPC8349E-mITX bug #13601. 318 If the RTC does not contain valid register values, the DS1339 319 Linux driver will not work. 320 */ 321 322 /* Make sure status register bits 6-2 are zero */ 323 ds1339_data[0x0f] &= ~0x7c; 324 325 /* Check for a valid day register value */ 326 ds1339_data[0x03] &= ~0xf8; 327 if (ds1339_data[0x03] == 0) { 328 ds1339_data[0x03] = 1; 329 } 330 331 /* Check for a valid date register value */ 332 ds1339_data[0x04] &= ~0xc0; 333 if ((ds1339_data[0x04] == 0) || 334 ((ds1339_data[0x04] & 0x0f) > 9) || 335 (ds1339_data[0x04] >= 0x32)) { 336 ds1339_data[0x04] = 1; 337 } 338 339 /* Check for a valid month register value */ 340 ds1339_data[0x05] &= ~0x60; 341 342 if ((ds1339_data[0x05] == 0) || 343 ((ds1339_data[0x05] & 0x0f) > 9) || 344 ((ds1339_data[0x05] >= 0x13) 345 && (ds1339_data[0x05] <= 0x19))) { 346 ds1339_data[0x05] = 1; 347 } 348 349 /* Enable Oscillator and rate select */ 350 ds1339_data[0x0e] = 0x1c; 351 352 /* Work-around for MPC8349E-mITX bug #13330. 353 Ensure that the RTC control register contains the value 0x1c. 354 This affects SATA performance. 355 */ 356 357 if (i2c_write 358 (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, 359 sizeof(ds1339_data))) { 360 puts("Failure writing to the RTC via I2C.\n"); 361 rc = 1; 362 } 363 } else { 364 puts("Failure reading from the RTC via I2C.\n"); 365 rc = 1; 366 } 367 #endif 368 369 i2c_set_bus_num(orig_bus); 370 #endif 371 372 #ifdef CONFIG_VSC7385_IMAGE 373 if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, 374 CONFIG_VSC7385_IMAGE_SIZE)) { 375 puts("Failure uploading VSC7385 microcode.\n"); 376 rc = 1; 377 } 378 #endif 379 380 return rc; 381 } 382 383 #if defined(CONFIG_OF_BOARD_SETUP) 384 int ft_board_setup(void *blob, bd_t *bd) 385 { 386 ft_cpu_setup(blob, bd); 387 #ifdef CONFIG_PCI 388 ft_pci_setup(blob, bd); 389 #endif 390 391 return 0; 392 } 393 #endif 394
