1 /* 2 * Copyright (c) 2013, The Linux Foundation. All rights reserved. 3 * Not a Contribution. 4 * Copyright (C) 2009-2012 Broadcom Corporation 5 * 6 * Licensed under the Apache License, Version 2.0 (the "License"); 7 * you may not use this file except in compliance with the License. 8 * You may obtain a copy of the License at 9 * 10 * http://www.apache.org/licenses/LICENSE-2.0 11 * 12 * Unless required by applicable law or agreed to in writing, software 13 * distributed under the License is distributed on an "AS IS" BASIS, 14 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15 * See the License for the specific language governing permissions and 16 * limitations under the License. 17 */ 18 19 #ifndef HCI_UART_H 20 #define HCI_UART_H 21 22 #include <asm-generic/ioctls.h> 23 24 /* Variables to identify the platform */ 25 /*BT HS UART TTY DEVICE */ 26 #define BT_HS_UART_DEVICE "/dev/ttyHS0" 27 28 /**** baud rates ****/ 29 #define USERIAL_BAUD_300 0 30 #define USERIAL_BAUD_600 1 31 #define USERIAL_BAUD_1200 2 32 #define USERIAL_BAUD_2400 3 33 #define USERIAL_BAUD_9600 4 34 #define USERIAL_BAUD_19200 5 35 #define USERIAL_BAUD_57600 6 36 #define USERIAL_BAUD_115200 7 37 #define USERIAL_BAUD_230400 8 38 #define USERIAL_BAUD_460800 9 39 #define USERIAL_BAUD_921600 10 40 #define USERIAL_BAUD_1M 11 41 #define USERIAL_BAUD_1_5M 12 42 #define USERIAL_BAUD_2M 13 43 #define USERIAL_BAUD_3M 14 44 #define USERIAL_BAUD_4M 15 45 #define USERIAL_BAUD_AUTO 16 46 47 /**** Data Format ****/ 48 /* Stop Bits */ 49 #define USERIAL_STOPBITS_1 1 50 #define USERIAL_STOPBITS_1_5 (1<<1) 51 #define USERIAL_STOPBITS_2 (1<<2) 52 53 /* Parity Bits */ 54 #define USERIAL_PARITY_NONE (1<<3) 55 #define USERIAL_PARITY_EVEN (1<<4) 56 #define USERIAL_PARITY_ODD (1<<5) 57 58 /* Data Bits */ 59 #define USERIAL_DATABITS_5 (1<<6) 60 #define USERIAL_DATABITS_6 (1<<7) 61 #define USERIAL_DATABITS_7 (1<<8) 62 #define USERIAL_DATABITS_8 (1<<9) 63 64 /* HCI Packet types */ 65 #define HCI_COMMAND_PKT 0x01 66 #define HCI_ACLDATA_PKT 0x02 67 #define HCI_SCODATA_PKT 0x03 68 #define HCI_EVENT_PKT 0x04 69 #define HCI_VENDOR_PKT 0xff 70 71 /* HCI Command/Event Opcode */ 72 #define HCI_RESET 0x0C03 73 #define EVT_CMD_COMPLETE 0x0E 74 75 /* Command opcode pack/unpack */ 76 #define cmd_opcode_pack(ogf, ocf) (uint16_t)((ocf & 0x03ff)|(ogf << 10)) 77 78 #if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE) 79 /* These are the ioctl values used for bt_wake ioctl via UART driver. you may 80 * need to redefine them on you platform! 81 * Logically they need to be unique and not colide with existing uart ioctl's. 82 */ 83 #ifndef USERIAL_IOCTL_BT_WAKE_ASSERT 84 #define USERIAL_IOCTL_BT_WAKE_ASSERT 0x8003 85 #endif 86 #ifndef USERIAL_IOCTL_BT_WAKE_DEASSERT 87 #define USERIAL_IOCTL_BT_WAKE_DEASSERT 0x8004 88 #endif 89 #ifndef USERIAL_IOCTL_BT_WAKE_GET_ST 90 #define USERIAL_IOCTL_BT_WAKE_GET_ST 0x8005 91 #endif 92 #endif // (BT_WAKE_VIA_USERIAL_IOCTL==TRUE) 93 94 /* UART CLOCK IOCTLS*/ 95 /* UART CLOCK IOCTLS*/ 96 #define USERIAL_OP_CLK_ON TIOCPMGET /* PM get */ 97 #define USERIAL_OP_CLK_OFF TIOCPMPUT /* PM put */ 98 #define USERIAL_OP_CLK_STATE TIOCPMACT /* PM is active */ 99 100 /****************************************************************************** 101 ** Type definitions 102 ******************************************************************************/ 103 104 /* Structure used to configure serial port during open */ 105 typedef struct 106 { 107 uint16_t fmt; /* Data format */ 108 uint8_t baud; /* Baud rate */ 109 } tUSERIAL_CFG; 110 111 typedef enum { 112 #if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE) 113 USERIAL_OP_ASSERT_BT_WAKE, 114 USERIAL_OP_DEASSERT_BT_WAKE, 115 USERIAL_OP_GET_BT_WAKE_STATE, 116 #endif 117 USERIAL_OP_FLOW_ON, 118 USERIAL_OP_FLOW_OFF, 119 USERIAL_OP_NOP, 120 } userial_vendor_ioctl_op_t; 121 122 /* UPIO signals */ 123 enum { 124 UPIO_BT_WAKE = 0, 125 UPIO_HOST_WAKE, 126 UPIO_LPM_MODE, 127 UPIO_MAX_COUNT 128 }; 129 130 /* UPIO assertion/deassertion */ 131 enum { 132 UPIO_UNKNOWN = 0, 133 UPIO_DEASSERT, 134 UPIO_ASSERT 135 }; 136 137 #define VND_PORT_NAME_MAXLEN 256 138 139 /* vendor serial control block */ 140 typedef struct 141 { 142 int fd; /* fd to Bluetooth device */ 143 struct termios termios; /* serial terminal of BT port */ 144 char port_name[VND_PORT_NAME_MAXLEN]; 145 } vnd_userial_cb_t; 146 147 typedef struct { 148 uint8_t ncmd; 149 uint16_t opcode; 150 } __attribute__ ((packed)) evt_cmd_complete; 151 152 typedef struct { 153 uint8_t status; 154 uint8_t ncmd; 155 uint16_t opcode; 156 } __attribute__ ((packed)) evt_cmd_status; 157 158 typedef struct { 159 uint16_t opcode; 160 uint8_t plen; 161 } __attribute__ ((packed)) hci_command_hdr; 162 163 typedef struct { 164 uint8_t evt; 165 uint8_t plen; 166 } __attribute__ ((packed)) hci_event_hdr; 167 168 /****************************************************************************** 169 ** Extern 170 ******************************************************************************/ 171 extern vnd_userial_cb_t vnd_userial; 172 173 174 /******************************************************************************* 175 ** 176 ** Function userial_vendor_init 177 ** 178 ** Description Initialize userial vendor-specific control block 179 ** 180 ** Returns None 181 ** 182 *******************************************************************************/ 183 void userial_vendor_init(void); 184 185 /******************************************************************************* 186 ** 187 ** Function userial_vendor_open 188 ** 189 ** Description Open the serial port with the given configuration 190 ** 191 ** Returns device fd 192 ** 193 *******************************************************************************/ 194 int userial_vendor_open(tUSERIAL_CFG *p_cfg); 195 196 /******************************************************************************* 197 ** 198 ** Function userial_vendor_close 199 ** 200 ** Description Conduct vendor-specific close work 201 ** 202 ** Returns None 203 ** 204 *******************************************************************************/ 205 void userial_vendor_close(void); 206 207 /******************************************************************************* 208 ** 209 ** Function userial_vendor_set_baud 210 ** 211 ** Description Set new baud rate 212 ** 213 ** Returns None 214 ** 215 *******************************************************************************/ 216 void userial_vendor_set_baud(uint8_t userial_baud); 217 218 /******************************************************************************* 219 ** 220 ** Function userial_vendor_ioctl 221 ** 222 ** Description ioctl inteface 223 ** 224 ** Returns int error 225 ** 226 *******************************************************************************/ 227 int userial_vendor_ioctl(userial_vendor_ioctl_op_t op, int *p_data); 228 229 /******************************************************************************* 230 ** 231 ** Function userial_to_tcio_baud 232 ** 233 ** Description helper function converts USERIAL baud rates into TCIO 234 ** conforming baud rates 235 ** 236 ** Returns TRUE/FALSE 237 ** 238 *******************************************************************************/ 239 uint8_t userial_to_tcio_baud(uint8_t cfg_baud, uint32_t *baud); 240 241 /******************************************************************************* 242 ** 243 ** Function userial_to_baud_tcio 244 ** 245 ** Description helper function converts TCIO baud rate into integer 246 ** 247 ** Returns uint32_t 248 ** 249 *******************************************************************************/ 250 int userial_tcio_baud_to_int(uint32_t baud); 251 252 /******************************************************************************* 253 ** 254 ** Function read_hci_event 255 ** 256 ** Description Read HCI event during vendor initialization 257 ** 258 ** Returns int: size to read 259 ** 260 *******************************************************************************/ 261 int read_hci_event(int fd, unsigned char* buf, int size); 262 263 #endif /* HCI_UART_H */ 264
